• Ehitusaasta alates: 01.1991
• Pistikkontaktide arv: 4
• Lülituspunkt [°C]: 108, 112
• Värvimarkeering: pruun
• temperatuurivahemik alates [°C]: 108
• Temperatuurivahemik kuni [°C]: 119
• Tootja: JP GROUP
• Lisainfo: PAKENDIS 10 tk

• Kasutuspinge [V]: 12
• Lülituspunkt [°C]: 150
• Läbimõõt [mm]: 20
• Värv: sinine, must
• Pistikkontaktide arv: 4
• Lisainfo: Temperature sensor for cooling system, 4 pins

• Pistikkontaktide arv: 2
• Korpusevärv: must
• Pistikukatte kuju: nurgeline
• Tootja: JP GROUP
• Lisainfo: Temperature sensor for cooling system, 2 pins

• Siseläbimõõt [mm]: 19,5
• Jämedus/Tugevus (mm): 3,5
• Materjal: Kumm
• OE-numbri jaoks: 7198663
• Tootja: DELLO AUTOMEGA

• Siseläbimõõt [mm]: 19,5
• Jämedus/Tugevus (mm): 3,5
• Kaal (kg): 0,001
• Tootja: VEMO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Pistikkontaktide arv: 2
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Pistikukatte kuju: ristkülik
• Pistikute teostus: Lamepistik
• OE-numbri jaoks: 251 919 372
• Tootja: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Pistikkontaktide arv: 2
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Pistikukatte kuju: ristkülik
• Pistikute teostus: Lamepistik
• sobiv mootortüübi jaoks: K-Jetronic
• OE-numbri jaoks: 251 919 372A
• Tootja: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Keermemõõt: M10x1
• Värv: must
• Pistikkontaktide arv: 1
• Võtmekaugus: 14
• Pikkus (mm): 25
• Tootja: DELLO AUTOMEGA

• OE-numbri jaoks: 7355021
• Tootja: KAMOKA

• Pistikukatte kuju: ristkülik
• Anduritüüp: NTC-andur
• Pistikkontaktide arv: 2
• Värvimarkeering: must/roheline
• Tootja: TOPRAN
• Lisainfo: 103 327 HP

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Värvimarkeering: must/roheline
• Pistikukatte kuju: ristkülik
• Pistikkontaktide arv: 2
• Välisläbimõõt [mm]: 20
• OE-numbri jaoks: 1669949
• Tootja: DELLO AUTOMEGA

• Kerenumber (VIN) alates: 32-J-000 001
• Sõidukivarustus: Kliimaseadmega sõidukile
• Pistikkontaktide arv: 2
• Lülituspunkt [°C]: 119
• Lisainfo: Thermo switch for air condition 119 C

• Keermemõõt: M10x1,0
• Värv: must
• Ühenduste arv: 1
• Kaal (kg): 0,019
• Tootja: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Mootorikood: SB
• Pistikkontaktide arv: 4
• Läbimõõt [mm]: 20
• Värv: kollane/must
• Tootja: DELLO AUTOMEGA

• Pistikkontaktide arv: 4
• Installatsiooniläbimõõt (mm): 20
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• OE-numbri jaoks: 1331294
• Tootja: KAMOKA

• OE-numbri jaoks: 251919501A
• Tootja: KAMOKA

• OE-numbri jaoks: 357919501A
• Tootja: KAMOKA

• Kaal (kg): 0,041
• Ühenduste arv: 4
• Välisläbimõõt [mm]: 20
• Värv: kollane
• Värvimarkeering: sinine
• vajaminev tükihulk: 1
• Üldine informatsioon: temperature sensor; yellow
• Tootja: VIKA

• Korpusevärv: punane
• Tootja: KAMOKA

• Ehitusaasta alates: 08.1991
• Pistikukatte kuju: ristkülik
• Anduritüüp: NTC-andur
• Pistikkontaktide arv: 4
• Värvimarkeering: kollane/must
• Tootja: TOPRAN
• Lisainfo: 103 568 HP

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Korpusevärv: valge
• OE-numbri jaoks: 191 919 369 A S1
• Tootja: KAMOKA

• Pikkus (mm): 25
• Temperatuurivahemik kuni [°C]: 125
• Väliskeerme mõõde: M10 x 1
• Keermepikkus (mm): 10,9
• Võtmekaugus: 14
• Ühenduste arv: 1
• Värvimarkeering: must
• Kaal (kg): 0,012
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Tootja: FEBI

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Kerenumber (VIN) alates: 31-J-000 001
• Katalüsaatoritüüp: Katalüsaatoriga sõidukile
• Keermemõõt: M10x1
• Värv: valge
• Pistikkontaktide arv: 2
• Tootja: DELLO AUTOMEGA

• OE-numbri jaoks: 191919369A
• Tootja: KAMOKA

• Kaal (kg): 0,041
• Ühenduste arv: 4
• Välisläbimõõt [mm]: 20
• Värv: sinine
• Värvimarkeering: sinine
• vajaminev tükihulk: 1
• Üldine informatsioon: temperature sensor; blue
• Tootja: VIKA

• Avamistemperatuur (°C): 120
• Pistikuteostus-ID: 2 polig
• Värv: valge
• Võtmekaugus: 20 mm
• Üldine informatsioon: thermal switch
• Tootja: VIKA

• Sisselülitamispunkt [°C]: 95
• Väljalülimispunkt (°C): 84
• Pistikkontaktide arv: 2
• Pistikukatte kuju: ristkülik
• Keermemõõt: M22X1,5
• Tootja: DELLO AUTOMEGA

• Ühenduste arv: 2
• Värvimarkeering: roheline
• Kaal (kg): 0,02
• Tootja: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pistikukatte kuju: ümar
• Materjal: Messing
• Pistikkontaktide arv: 1
• Pistikute teostus: Male
• Anduritüüp: NTC-andur
• Võtmekaugus: 14 mm
• Keermemõõt: M10x1,0
• Tootja: NISSENS

Tehniline informatsioon: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Pistikkontaktide arv: 3
• Sisselülitamispunkt [°C]: 95
• Väljalülimispunkt (°C): 85
• Tootja: DELLO AUTOMEGA

• Pistikkontaktide arv: 3
• Võtmekaugus: 29
• Keermemõõt: M 22 x 1,5
• Pistikukatte kuju: nurgeline
• Korpusevärv: must
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Sisselülitamispunkt [°C]: 85, 93
• Väljalülimispunkt (°C): 80, 88
• Ülekannete arv: 2
• Tootja: DELLO AUTOMEGA

• Korpusevärv: must
• Pistikkontaktide arv: 4
• Tootja: DELPHI
• Nimetus: DE TS10245-12B1

• Mootorikood: SB
• Lülituspunkt [°C]: 120
• Keermemõõt: 20 mm
• Anduritüüp: kinnine anduri ehitusviis
• Tootja: VERNET

• Kerenumber (VIN) alates: 31-M-033272
• Ehitusaasta kuni: 07.1991
• Plokieraldus:
• Ehitusaasta alates: 08.1991
• Keermemõõt: M 22 x 1,5
• Pistikkontaktide arv: 2
• Sisselülitamispunkt [°C]: 80
• Väljalülimispunkt (°C): 75
• Pistikute teostus: Lamepistik
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Tootja: TOPRAN HANS PRIES

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• vajaminev tükihulk: 1
• Pistikkontaktide arv: 2
• Värv: must
• Tootja: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Mootorikood: SB
• uus mudel:
• Välisläbimõõt [mm]: 20
• Ühenduste arv: 4
• Värv: must
• Värvimarkeering: sinine
• Piirangutega toode/piirangu info 2: ilma rõngastihendita
• Kaal (kg): 0,023
• Tootja: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Anduritüüp: NTC-andur
• Montaaživiis: klemmitud
• Pistikukatte kuju: ristkülik
• Pistikkontaktide arv: 2
• Pistiku värv: must
• OE-numbri jaoks: 251919501A
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Tootja: NRF

• Värv: hall
• Võtmekaugus: 29
• OE-numbri jaoks: A0015403045
• Tootja: KAMOKA

• Avamistemperatuur (°C): 120
• Pistikkontaktide arv: 2
• Värv: valge
• Võtmekaugus: 20 mm
• Kaal (kg): 0,02
• Tootja: VEMO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Ehitusaasta alates: 01.1991
• temperatuurivahemik alates [°C]: 108
• Temperatuurivahemik kuni [°C]: 119
• Pistikukatte kuju: ristkülik
• Pistikkontaktide arv: 4
• Installatsiooniläbimõõt (mm): 20
• Lülituspunkt [°C]: 108, 112
• Värvimarkeering: pruun
• Tootja: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• vajaminev tükihulk: 1
• Eriotstarbe-sõid.: rendiauto jaoks, taksode jaoks
• ainult ühenduses koos: Zusatzwasserpumpe
• Pistikkontaktide arv: 2
• Lülituspunkt [°C]: 55, 65
• Värv: punane
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Tootja: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Anduritüüp: NTC-andur
• Montaaživiis: klemmitud
• Pistikukatte kuju: ristkülik
• Pistikkontaktide arv: 4
• Pistiku värv: must
• OE-numbri jaoks: 357919501A
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Tootja: NRF

• vajaminev tükihulk: 1
• Temperatuurivahemik kuni [°C]: 125
• Väliskeere [mm]: M10 x 1
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Tootja: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Värv: must
• Pistikkontaktide arv: 1
• Kaal (kg): 0,3
• pakendi pikkus [cm]: 12
• pakendi laius [cm]: 8
• pakendi kõrgus [cm]: 6

• Pistikukatte kuju: ristkülik
• Materjal: Messing
• Pistikkontaktide arv: 2
• Pistikute teostus: Male
• Anduritüüp: NTC-andur
• Võtmekaugus: 20 mm
• Tootja: NISSENS

Tehniline informatsioon: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Pistikukatte kuju: nurgeline
• Keermemõõt: M 22 x 1,5
• Pistikkontaktide arv: 3
• Ülekannete arv: 2
• Sisselülitamispunkt [°C]: 95, 102
• Väljalülimispunkt (°C): 85, 92
• Võtmekaugus: 29
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Korpusevärv: must
• Tootja: TOPRAN HANS PRIES

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Ehitusaasta kuni: 07.1993
• Töötemperatuur alates [°C]: 94
• Töötemperatuur kuni [°C]: 84
• Keermemõõt: M22x1.5
• Anduritüüp: lahtine anduri ehitusviis
• Tootja: VERNET

• Korpusevärv: punane
• Pistikkontaktide arv: 2
• Võtmekaugus: 0
• Tootja: DELPHI
• Nimetus: DE TS10286

• Pistikkontaktide arv: 3
• Sisselülitamispunkt [°C]: 95, 102
• Väljalülimispunkt (°C): 84, 91
• Tootja: JP GROUP
• Lisainfo: Thermo switch for fan 95-84 C/102-91 C, 3 pins

• Ehitusaasta alates: 09.1988
• Keermemõõt: 20 mm
• Tootja: VERNET

• Kerenumber (VIN) alates: 31-M-033272
• Keermemõõt: M 22 x 1,5
• Väljalülimispunkt (°C): 84
• Sisselülitamispunkt [°C]: 95
• Pistikkontaktide arv: 2
• Pistikukatte kuju: nurgeline
• Võtmekaugus: 29
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Tootja: TOPRAN HANS PRIES

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Mootorikood: SB
• Töötemperatuur alates [°C]: 112
• Töötemperatuur kuni [°C]: 120
• Keermemõõt: 20 mm
• Tootja: VERNET

• Pistikukatte kuju: nurgeline
• Keermemõõt: M 22 x 1,5
• Pistikkontaktide arv: 3
• Võtmekaugus: 29
• Sisselülitamispunkt [°C]: 85, 93
• Väljalülimispunkt (°C): 80, 88
• Ülekannete arv: 2
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Korpusevärv: must
• Tootja: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Ehitusaasta alates: 08.1992
• Korpusevärv: must
• Värvimarkeering: kollane
• Vastab originaalosa värvile: sinine, kollane
• Pistikkontaktide arv: 4
• Piirangutega toode/piirangu info: koos tihendiga
• soovitava lisavarustuse artiklinumber: 0905458
• Versioon: IAM
• Võimsus [W]: 0,06
• Tootja: METZGER

• Keermemõõt: M 22 x 1,5
• Pistikkontaktide arv: 3
• Pistikukatte kuju: nurgeline
• Sisselülitamispunkt [°C]: 95, 102
• Väljalülimispunkt (°C): 84, 91
• Võtmekaugus: 29
• Ülekannete arv: 2
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Korpusevärv: must
• Tootja: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Mootorikood: RA
• Tootja: FACET

• Pistikkontaktide arv: 4
• Installatsiooniläbimõõt (mm): 20
• Tootja: FAE

• Ehitusaasta alates: 07.1993
• Töötemperatuur alates [°C]: 95, 102
• Töötemperatuur kuni [°C]: 84, 91
• Keermemõõt: M22x1.5
• Anduritüüp: lahtine anduri ehitusviis
• Tootja: VERNET

• OE-numbri jaoks: 191 959 481 C
• Lülitamispunkt alates [°C]: 102
• Lülituspunkt kuni [°C]: 85
• Tootja: TRUCKTEC

• mudeli koodi jaoks: For Cooling Fan
• Pistikkontaktide arv: 2
• Pistikukatte kuju: ristkülik
• Tootja: DELPHI
• Nimetus: DE TS10321

• Mootorikood: RA
• Tootja: EPS

• Mootorikood: SB
• uus mudel:
• Välisläbimõõt [mm]: 20
• Ühenduste arv: 4
• Värv: must
• Värvimarkeering: sinine
• Kaal (kg): 0,026
• Piirangutega toode/piirangu info: hoidevedruga, koos tihendiga
• Tootja: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Mootorikood: SB
• mudeli koodi jaoks: 2 Pin
• Keermemõõt: M22*1.5
• Võtmekaugus: S29
• Pistikkontaktide arv: 2
• Pistikukatte kuju: ristkülik
• Tootja: DELPHI
• Nimetus: DE TS10298

• Mootorikood: SB
• Pistikkontaktide arv: 4
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Värv: must
• Tootja: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Pistikkontaktide arv: 2
• Kaal (kg): 0,3
• pakendi pikkus [cm]: 12
• pakendi laius [cm]: 8
• pakendi kõrgus [cm]: 6

• Mootorikood: SB
• Läbimõõt [mm]: 25
• Pikkus (mm): 42
• Kaal (kg): 0,03
• Piirangutega toode/piirangu info: koos tihendiga
• OE-numbri jaoks: 6U0 919 501 B
• Värvimarkeering: sinine
• Pistikkontaktide arv: 4
• Tootja: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Keermemõõt: M22 x 1,5
• Värv: valge
• Lüliti: Topelttermolüliti jaoks
• Piirangutega toode/piirangu info: koos tihendiga
• Pistikkontaktide arv: 3
• Lülitamispunkt alates [°C]: 102
• Lülituspunkt kuni [°C]: 85
• Kaal (kg): 0,077
• Tootja: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lülituspunkt [°C]: 140
• Välisläbimõõt [mm]: 20
• Kaal (kg): 0,023
• Ühenduste arv: 4
• Värv: must
• Värvimarkeering: kollane
• Üldine informatsioon: coolant temperature sensor
• Tootja: BORSEHUNG

• Ehitusaasta kuni: 07.1993
• Töötemperatuur alates [°C]: 95, 102
• Töötemperatuur kuni [°C]: 84, 91
• Keermemõõt: M22x1.5
• Anduritüüp: lahtine anduri ehitusviis
• Tootja: VERNET

• Keermemõõt: M22x1.5
• Pistikkontaktide arv: 4
• Lülitamispunkt alates [°C]: 120
• Lülituspunkt kuni [°C]: 112
• Tootja: ERA

• Keermemõõt: 20 mm
• Tootja: VERNET

• vajaminev tükihulk: 1
• Lülituspunkt [°C]: 84
• Tootja: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Pistikkontaktide arv: 3
• Pistikukatte kuju: ovaalne
• Pistiku värv: must
• Väljalülimispunkt (°C): 95, 92
• Lülituspunkt [°C]: 85, 102
• Keermemõõt: M22x1,5 mm
• Võtmekaugus: 29 mm
• OE-numbri jaoks: 6U0959481A
• Tootja: MEAT & DORIA

• Väliskeerme mõõde: M22 x 1,5
• Võtmekaugus: 29
• Ühenduste arv: 3
• Värvimarkeering: hall
• temperatuurivahemik alates [°C]: 95, 102
• Temperatuurivahemik kuni [°C]: 84, 92
• Kaal (kg): 0,061
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Tootja: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Keermemõõt: M22x1,5
• Lüliti: Topelttermolüliti jaoks
• Piirangutega toode/piirangu info: koos tihendiga
• Pistikkontaktide arv: 3
• Kliimatsoonid: kuuma kliimavööndi jaoks
• Lülitamispunkt alates [°C]: 102
• Lülituspunkt kuni [°C]: 85
• Kaal (kg): 0,076
• Tootja: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Pistikkontaktide arv: 3
• Tootja: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Keermemõõt: M22 x 1,5
• Võtmekaugus: 29
• Pistikkontaktide arv: 2
• Lülitamispunkt alates [°C]: 95
• Lülituspunkt kuni [°C]: 84
• Tootja: ERA

• Läbimõõt [mm]: 29
• Kõrgus (mm): 42,7
• Keermemõõt: M22x1,5
• Piirangutega toode/piirangu info: koos tihendiga
• Pistikkontaktide arv: 2
• Lülitamispunkt alates [°C]: 95
• Lülituspunkt kuni [°C]: 84
• Kaal (kg): 0,067
• Tootja: VEMO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• OE-numbri jaoks: 321959481G
• Keermemõõt: M22x1.5
• Pistikkontaktide arv: 2
• Väändejõud [Nm]: 70
• Piirangutega toode/piirangu info: koos tihendiga
• Sisselülitamispunkt [°C]: 95
• Väljalülimispunkt (°C): 90
• pakendi laius [cm]: 3,5
• pakendi pikkus [cm]: 3,7
• Netokaal [g]: 61
• pakendi kõrgus [cm]: 7,2
• Tootja: MAHLE TERMOSTATY

• Mootorikood: SB
• Vastab originaalosa värvile: kollane, sinine, must
• Tootja: FACET

• Mootorikood: RA
• Pistikkontaktide arv: 2
• temperatuurivahemik alates [°C]: 95
• Temperatuurivahemik kuni [°C]: 90
• Keermemõõt: M22x1,5
• Võtmekaugus: 29
• Tootja: EPS