• Kogus pakendis: 10
• Fitting Position: Rear Axle both sides
• Fitted Diameter [mm]: 52
• Height [mm]: 9
• Material: Sheet Steel
• Nimetus: Kaitsekaas,rattakese
• Tootja: HAN
• Lisainfo: 111 316 HP

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Rear Axle Left, Rear Axle Right
• Rim Hole Number: 5
• Fabrication Number: KLT-VW-012-Z
• Tootja: NTY

• Rim Hole Number: 5
• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: KLP-VW-018-Z
• Tootja: NTY
• Nimetus: NTY KLP-VW-018-Z

• Fitting Position: Rear Axle Left, Rear Axle Right
• Fabrication Number: KLT-VW-012
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 137
• Rim Hole Number: 5
• Tootja: NTY

• Supplementary Article/Info 2: with wheel hub, with integrated ABS sensor
• Fitting Position: Front Axle, Front Axle Left, Front Axle Right
• Fabrication Number: KLP-VW-018
• Tootja: NTY
• Nimetus: NTY KLP-VW-018

• PR-numbri jaoks: 1ZC, 1ZF
• Fitting Position: Front Axle Left, Front Axle Right
• Supplementary Article/Info 2: with integrated wheel bearing
• Rim Hole Number: 5
• Lisainfo: Wheel hub for disc brake, front, 85 mm

• Hulk: 2
• Siseläbimõõt [mm]: 51
• Välisläbimõõt [mm]: 55
• Jämedus/Tugevus (mm): 9
• Tootja: 3RG

• Hulk: 2
• Installatsiooni pool: Tagasild
• Üldine informatsioon: End cap for rear axle hub
• Tootja: VIKA

• Fitting Position: Rear Axle
• Nimetus: KAITSEKAAS,RATTAKESE
• Tootja: MEY

• Fitting Position: Front Axle
• for article number: KLP-VW-013
• Fabrication Number: KLP-VW-013-Z
• Tootja: NTY

• Fitting Position: Rear Axle Left, Rear Axle Right
• Rim Hole Number: 5
• Outer Diameter [mm]: 137
• Inner Diameter [mm]: 30
• Bolt Hole Circle Ø [mm]: 112
• Assy./disassy. by qualified personnel required!:
• Tootja: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Number of Holes: 5
• Fitting Position: Rear Axle Left, Rear Axle Right
• Tootja: JP GROUP
• Lisainfo: Wheel hub with bearing, rear

• Fitting Position: Front Axle
• Rim Hole Number: 5
• Outer Diameter [mm]: 137
• Inner Diameter [mm]: 29
• Bolt Hole Circle Ø [mm]: 112
• Assy./disassy. by qualified personnel required!:
• Tootja: ABAKUS LORO
• Nimetus: AB 141-01-012
• Lisainfo: ABA141-01-012

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Number of Holes: 5
• Fitting Position: Rear Axle Left, Rear Axle Right
• Supplementary Article/Info 2: with wheel bearing
• Tootja: JP GROUP
• Lisainfo: Wheel Hub

• Fitting Position: Front Axle
• Rim Hole Number: 5
• Outer Diameter [mm]: 136
• Inner Diameter [mm]: 29
• Bolt Hole Circle Ø [mm]: 112
• Assy./disassy. by qualified personnel required!:
• Nimetus: AB 141-01-013
• Tootja: ABAKUS
• Lisainfo: ABA141-01-013

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Supplementary Article/Info 2: with integrated wheel bearing
• Rim Hole Number: 5
• Tootja: JP-GROUP
• Lisainfo: Wheel hub with bearing, rear

• Kerenumber (VIN) alates: 1K-4P025001
• Plokieraldus:
• PR-numbri jaoks: 1KE, 1KV, 1KY, 1KZ, 0FA, 0FC, 0FG, 0FV, 1KD
• Fitting Position: Rear Axle Left, Rear Axle Right
• Quantity per axle: 2
• Rim Hole Number: 5
• Outer Diameter [mm]: 136
• Bolt Hole Circle Ø [mm]: 112
• Centering Diameter [mm]: 30
• Tootja: TOPRAN

Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with grease cap, with screw General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Installatsiooni pool: esisild vasakul, esisild paremal
• mitte PR-numbrile: 1ZF
• Supplementary Article/Info 2: with wheel bearing
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Tootja: JP GROUP
• Lisainfo: Wheel Hub

• Hulk: 2
• Installatsiooni pool: Tagasild
• Aukude arv: 5
• Kaal (kg): 2,2
• Piirangutega toode/piirangu info 2: Rattalaager on integreeritud rattarummu
• vajaminev tükihulk: 2
• Ava Ø (mm): 112
• Laius (mm): 68,5
• Siseläbimõõt [mm]: 30
• Välisläbimõõt [mm]: 136
• Laagriteostus: kuullaager
• Üldine informatsioon: Wheel bearing assembly; rear
• Tootja: VIKA

• Rim Hole Number: 5
• Fabrication Number: KLP-VW-013
• Fitting Position: Front Axle Left, Front Axle Right
• Tootja: NTY
• Nimetus: NTY KLP-VW-013

Supplementary Article/Info 2: without bolts/screws, with integrated magnetic sensor ring

• Fitting Position: Rear Axle
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 137
• Bolt Hole Circle Ø [mm]: 112
• Number of Teeth, ABS ring: 86
• Rim Hole Number: 5
• Bearing Type: Ball Bearing
• Nimetus: RATTARUMM
• Tootja: MEY

Supplementary Article/Info 2: with integrated wheel bearing, with integrated magnetic sensor ring General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.

• Hulk: 2
• Installatsiooni pool: Tagasild
• Aukude arv: 5
• Kaal (kg): 2,366
• Piirangutega toode/piirangu info 2: Rattalaager on integreeritud rattarummu
• vajaminev tükihulk: 2
• Ava Ø (mm): 112
• Laius (mm): 70
• Siseläbimõõt [mm]: 32
• Välisläbimõõt [mm]: 136
• Laagriteostus: kuullaager
• Üldine informatsioon: Wheel bearing assembly; rear
• Tootja: VIKA

• Installatsiooni pool: Tagasild mõlemapoolselt
• Kõrgus (mm): 68,6
• Kaal (kg): 1,87
• Trumli läbimõõt [mm]: 65
• Siseläbimõõt [mm]: 30
• Välisläbimõõt [mm]: 136
• Aukude arv: 5
• Ratta keskauguläbimõõt (mm): 56,8
• Piirangutega toode/piirangu info 2: koos laagriga
• Tootja: METALCAUCHO

• Width [mm]: 70
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 136
• Bolt Hole Circle Ø [mm]: 112
• Number of Holes: 5
• Bearing Type: Angular Ball Bearing
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 2.366
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Observe service information:
• Tootja: FEBI BILSTEIN
• Lisainfo: 23320 FEBI

Supplementary Article/Info 2: with integrated magnetic sensor ring, Wheel Bearing integrated into wheel hub, with ABS sensor ring General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Inner Diameter [mm]: 30
• Outer Diameter [mm]: 136
• Bolt Hole Circle Ø [mm]: 112
• Rim Hole Number: 5
• Bearing Type: Ball Bearing
• Nimetus: RATTARUMM
• Tootja: MEY

Supplementary Article/Info 2: with integrated wheel bearing, with integrated magnetic sensor ring General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.

• Installatsiooni pool: esisild vasakul, esisild paremal
• Kerenumber (VIN) alates: 1K-5B162041, 1K-5P108282, 1K-5U027668, 1K-5W572545
• PR-numbri jaoks: 1ZC, 1ZF
• Plokieraldus:
• Rim Hole Number: 5
• Quantity per axle: 2
• Number of flange connections: 3
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Bolt Hole Circle Ø [mm]: 112
• Tootja: TOPRAN

Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with bolts/screws, with integrated magnetic sensor ring General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Width [mm]: 70
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 136
• Bolt Hole Circle Ø [mm]: 112
• Number of Holes: 5
• Bearing Type: Angular Ball Bearing
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 2.366
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Observe service information:
• Nimetus: SW 32 92 3320
• Tootja: SWAG

Supplementary Article/Info 2: with integrated magnetic sensor ring, Wheel Bearing integrated into wheel hub, with ABS sensor ring General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: Esisild
• mitte PR-numbrile: 1ZF
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Inner Diameter [mm]: 27.5
• Outer Diameter [mm]: 136
• Bolt Hole Circle Ø [mm]: 112
• Rim Hole Number: 5
• Fastening Type: Four-point attachment
• Braking/Driving Dynamics: for vehicles with ABS
• Number of Teeth: 36
• Bearing Type: Ball Bearing
• Nimetus: RATTARUMM
• Tootja: MEY

Supplementary Article/Info 2: with integrated wheel bearing, with integrated magnetic sensor ring General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.

• PR-numbri jaoks: 1ZF
• Number of mounting bores: 3
• Width [mm]: 85
• Inner Diameter [mm]: 27
• Outer Diameter [mm]: 136
• Bolt Hole Circle Ø [mm]: 112
• Number of Holes: 5
• Bearing Type: Angular Ball Bearing
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.365
• for OE number: 1K0 407 621 E SK
• Tootja: FEBI BILSTEIN JR.

Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Mudeliaasta kuni: 2007
• kombineeritud PR-numbrile: 1KD+0FA, 1KD+0FC, 1KD+0FV
• Fitting Position: Rear Axle
• Weight [kg]: 2.219
• Number of Teeth, ABS ring: 86
• Outer Diameter [mm]: 30
• Supplementary Article/Info 2: with ABS sensor ring
• Packaging length [cm]: 13.7
• Packaging width [cm]: 13.7
• Packaging height [cm]: 9
• Tootja: FEBEST

• Installatsiooni pool: esisild vasakul, esisild paremal
• mitte PR-numbrile: 1ZC, 1ZF
• Rim Hole Number: 5
• Quantity per axle: 2
• Number of flange connections: 4
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Bolt Hole Circle Ø [mm]: 112
• Tootja: TOPRAN

Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with bolts/screws, with integrated magnetic sensor ring General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• PR-numbri jaoks: 1ZF
• Number of mounting bores: 3
• Width [mm]: 85
• Inner Diameter [mm]: 27
• Outer Diameter [mm]: 136
• Bolt Hole Circle Ø [mm]: 112
• Number of Holes: 5
• Bearing Type: Angular Ball Bearing
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.765
• for OE number: 5K0 498 621 A
• Nimetus: RATTALAAGRIKOMPLEKT
• Tootja: FEB

Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• PR-numbri jaoks: 1ZC, 1ZF
• Fitting Position: Front Axle
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Inner Diameter [mm]: 27
• Outer Diameter [mm]: 136
• Bolt Hole Circle Ø [mm]: 112
• Number of Teeth, ABS ring: 96
• Rim Hole Number: 5
• Fastening Type: 3-point attachment
• Number of Teeth: 36
• Bearing Type: Ball Bearing
• Nimetus: RATTARUMM
• Tootja: MEY

Supplementary Article/Info 2: with integrated magnetic sensor ring, with integrated wheel bearing General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.

• PR-numbri jaoks: 1ZF
• Number of mounting bores: 3
• Width [mm]: 85
• Inner Diameter [mm]: 27
• Outer Diameter [mm]: 136
• Bolt Hole Circle Ø [mm]: 112
• Number of Holes: 5
• Bearing Type: Angular Ball Bearing
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.765
• for OE number: 5K0 498 621 A
• Nimetus: SW 30 92 7342
• Tootja: SWAG

Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: esisild mõlemapoolselt
• Bolt Hole Circle Ø [mm]: 112
• Number of Holes: 4
• Weight [kg]: 3.12
• Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub
• Width [mm]: 84.5
• Inner Diameter [mm]: 27.5
• Outer Diameter [mm]: 136
• Bearing Type: Rolling Bearing
• General Information: Wheel bearing assembly; front; 4 holes
• Tootja: BORSEHUNG

• PR-numbri jaoks: 1ZF
• Mudeliaasta kuni: 2007
• Fitting Position: Front Axle
• Weight [kg]: 3.22
• Outer Diameter [mm]: 136
• Packaging length [cm]: 13.7
• Packaging width [cm]: 13.7
• Packaging height [cm]: 10
• Tootja: FEBEST

• PR-numbri jaoks: 1ZC, 1ZF
• Installatsiooni pool: esisild vasakul, esisild paremal
• Piduri-/sõidudünaamika: Sõidukitele koos ABS-ga
• Inner Diameter 1 [mm]: 29
• Outer Diameter 1 [mm]: 137
• Height 1 [mm]: 84
• Rim Hole Number: 5
• Number of Teeth, ABS ring: 86
• Thread Size: M12 x 1.5
• Bolt Hole Circle Ø [mm]: 112
• Outer Diameter 2 [mm]: 80
• Number of flange connections: 3
• paired article number: 200985
• Weight [kg]: 3.68
• Tootja: ABS

Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring