• Switch point from [bar]: 0.15
• Switch point to [bar]: 0.35
• Colour Coding: blue
• Number of connectors: 1
• External Thread [mm]: M10x1
• Tootja: JP GROUP
• Lisainfo: PAKENDIS 10 tk

• Mootorikood: AHU
• Kerenumber (VIN) alates: 1H-X-010 001
• Switch point from [bar]: 0.15
• Switch point to [bar]: 0.35
• External Thread [mm]: M10x1
• Number of connectors: 1
• Colour Coding: blue
• Tootja: JP GROUP
• Lisainfo: PAKENDIS 10 tk

• Operating voltage [V]: 12
• Switch Point [°C]: 150
• Diameter [mm]: 20
• Colour: blue, black
• Number of pins: 4
• Tootja: JP GROUP
• Lisainfo: Temperature sensor for cooling system, 4 pins

• Thread Size: M10x1
• Length [mm]: 46
• Spanner Size: 24
• Colour: blue
• Number of pins: 1
• Tootja: DELLO AUTOMEGA

• Length [mm]: 46
• Spanner Size: 24
• Colour Coding: blue
• Number of pins: 1
• Thread Size: M10x1
• Pressure from [bar]: 0.15
• Pressure to [bar]: 0.35
• Diameter [mm]: 3
• Nimetus: OLISURVELšLITUS
• Tootja: MAX

• Mootorikood: 1Z
• Värv: sinine
• Pressure [bar]: 0.3
• Thread Size: M10x1
• Spanner Size: 24
• Nimetus: OLISURVELšLITUS
• Tootja: EPS
• Lisainfo: 1-800-108

• Üldine informatsioon: temperature sensor
• Tootja: VIKA

• Mudeliaasta kuni: 1994
• Kerenumber (VIN) alates: 1H-N-000 001
• Number of pins: 2
• Switch Point [°C]: 119
• Tootja: JP GROUP
• Lisainfo: Thermo switch for air condition 119 C

• Colour Coding: black
• Spanner Size: 13
• Thread Size: M10x1
• Number of pins: 1
• Plug Type: Blade Terminal
• Supplementary Article/Supplementary Info: with seal
• for OE number: 7203359
• Tootja: DELLO AUTOMEGA

• Thread Size: M10x1
• Pressure from [bar]: 0.75
• Pressure to [bar]: 1.05
• Tootja: MEAT&DORIA

• Switch point from [bar]: 0.15
• Length [mm]: 46
• Switch point to [bar]: 0.35
• Inner Diameter [mm]: 2.54
• External Thread Size: M10 x 1
• Thread Length [mm]: 13
• Spanner Size: 24
• Number of connectors: 1
• Colour Coding: blue
• Surface: Zinc-coated
• Weight [kg]: 0.031
• Supplementary Article/Info 2: with seal ring
• Nimetus: OLISURVELšLITUS
• Tootja: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Hulk: 1
• Kerenumber (VIN) alates: 1H-X-010 001
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Värvimarkeering: sinine
• Kaal (kg): 0,031
• vajaminev tükihulk: 1
• Väliskeere [mm]: M10 x 1
• Võtmekaugus: 22
• Ühenduste arv: 1
• Lülituspunkt alates [bar]: 0,15
• Lülituspunkt kuni [bar]: 0,35
• Üldine informatsioon: oil pressure switch
• Tootja: VIKA

• Switch point from [bar]: 0.15
• Length [mm]: 46
• Switch point to [bar]: 0.35
• Inner Diameter [mm]: 2.54
• External Thread Size: M10 x 1
• Thread Length [mm]: 13
• Spanner Size: 24
• Number of connectors: 1
• Colour Coding: blue
• Surface: Zinc-coated
• Weight [kg]: 0.031
• Supplementary Article/Info 2: with seal ring
• Nimetus: SW 30 23 0002
• Tootja: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Mootorikood: 1Z, AHU
• Number of pins: 4
• Diameter [mm]: 20
• Colour: yellow/black
• Tootja: DELLO AUTOMEGA

• Number of pins: 4
• Fitted Diameter [mm]: 20
• Supplementary Article/Info 2: with seal ring
• for OE number: 1331294
• Tootja: KAMOKA

• for OE number: 357919501A
• Tootja: KAMOKA

• Pressure [bar]: 3.5
• Housing Colour: blue
• Thread Size: M10×1-6g
• Diameter [mm]: 24
• Spanner Size: 24
• Number of pins: 1
• Tootja: DELPHI
• Nimetus: DE SW90009
• Lisainfo: SW90009

• Switch Pressure [bar]: 0.3
• Thread Size: M10x1.0
• Sensor Type: Closed-type Sensor
• Tootja: VERNET

• Mootorikood: 1Z, AHU
• Operating voltage [V]: 12
• Sensor Type: NTC Sensor
• Thread Size: M10x1.0
• Spanner Size: 13
• Colour: white
• Number of pins: 1
• Nimetus: Andur,Olitemperatuur
• Tootja: MEY

• Housing Colour: white
• for OE number: 191 919 369 A S1
• Tootja: KAMOKA

• Temperature range to [°C]: 125
• Length [mm]: 25
• External Thread Size: M10 x 1
• Thread Length [mm]: 10.9
• Spanner Size: 14
• Number of connectors: 1
• Colour Coding: black
• Weight [kg]: 0.012
• Supplementary Article/Info 2: with seal ring
• Tootja: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Switch Pressure [bar]: 0.9
• Thread Size: M10x1.0
• Sensor Type: Open-style sensor
• Tootja: VERNET

• Thread Size: M10x1,0
• Colour: black
• Number of connectors: 1
• Weight [kg]: 0.019
• Tootja: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Pressure [bar]: 0.25
• Thread Size: M10 x 1
• Technical Information Number: circuit N.C.
• Tootja: ERA

• Length [mm]: 51.2
• Thread Size: M10x1,0
• Supplementary Article/Supplementary Info: with seal
• Pressure from [bar]: 0.15
• Pressure to [bar]: 0.35
• Weight [kg]: 0.039
• Tootja: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Supplementary Article/Supplementary Info: with seal
• Thread Size: M10x1,0
• Control Range [bar]: 0,15 - 0,35
• Colour: blue
• Weight [kg]: 0.038
• Tootja: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Hulk: 1
• Värv: kollane
• Värvimarkeering: sinine
• Kaal (kg): 0,041
• vajaminev tükihulk: 1
• Välisläbimõõt [mm]: 20
• Ühenduste arv: 4
• Üldine informatsioon: temperature sensor; yellow
• Tootja: VIKA

• valikuliselt:
• Pressure [bar]: 10.5
• Housing Colour: grey
• Thread Size: M10×1-6g
• Diameter [mm]: 24
• Spanner Size: 24
• Number of pins: 1
• Nimetus: OLISURVELšLITUS
• Tootja: DLP
• Lisainfo: SW90007

• Mootorikood: 1Z
• Värv: hall
• Pressure [bar]: 0.9
• Thread Size: M10x1
• Spanner Size: 24
• Corresponds to the original part in colour: brown
• Nimetus: OLISURVELšLITUS
• Tootja: EPS

• Hulk: 1
• Värv: sinine
• Värvimarkeering: sinine
• Kaal (kg): 0,041
• vajaminev tükihulk: 1
• Välisläbimõõt [mm]: 20
• Ühenduste arv: 4
• Üldine informatsioon: temperature sensor; blue
• Tootja: VIKA

• Length [mm]: 25
• Temperature range to [°C]: 125
• External Thread Size: M10 x 1
• Thread Length [mm]: 10.9
• Spanner Size: 14
• Number of connectors: 1
• Colour Coding: black
• Weight [kg]: 0.012
• Supplementary Article/Info 2: with seal ring
• Nimetus: SW 99 90 1939
• Tootja: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Colour: white
• Number of pins: 2
• Nimetus: ANDUR,JAHUTUSVEDELIKU TEMP.
• Tootja: MAX

• Piirangutega toode/piirangu info: koos tihendiga
• Tootja: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Ehitusaasta kuni: 12.1997
• Pistikkontaktide arv: 1
• Surve (bar): 0,3
• Tootja: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Colour: black
• Colour Coding: blue
• Number of pins: 4
• Nimetus: ANDUR,JAHUTUSVEDELIKU TEMP.
• Tootja: MAX

• Hulk: 1
• Värvimarkeering: roheline
• Kaal (kg): 0,02
• vajaminev tükihulk: 1
• Ühenduste arv: 2
• Üldine informatsioon: temperature sensor
• Tootja: VIKA

• Diameter [mm]: 26
• Length [mm]: 35
• Weight [kg]: 0.02
• Supplementary Article/Info 2: with seal ring
• for OE number: 251 919 501 D
• Housing Colour: black
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 2
• Tootja: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Mootorikood: AHU
• Kerenumber (VIN) alates: 1H-X-010 001
• Switch point from [bar]: 0.15
• Switch point to [bar]: 0.35
• External Thread Size: M10 x 1
• Spanner Size: 22
• Number of connectors: 1
• Colour Coding: blue
• Weight [kg]: 0.031
• Supplementary Article/Info 2: with seal ring
• Nimetus: OLISURVELšLITUS
• Tootja: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pressure from [bar]: 0.75
• Pressure to [bar]: 1
• Combi Switch Function: Normally Open Contact
• Colour: grey
• Spanner Size: 24
• Thread Size: M10 x 1,0
• Number of pins: 1
• Nimetus: OLISURVELšLITUS
• Tootja: MEY

• Pressure from [bar]: 0.15
• Pressure to [bar]: 0.35
• Combi Switch Function: Normally Closed Contact
• Colour: blue
• Spanner Size: 24
• Thread Size: M10 x 1,0
• Number of pins: 1
• Nimetus: OLISURVELšLITUS
• Tootja: MEY

• Housing Colour: black
• Number of pins: 4
• Tootja: DELPHI

• Mootorikood: AHU
• Number of pins: 3
• Supplementary Article/Info 2: with bracket
• Guarantee: 3 years guarantee
• Weight [kg]: 0.1
• Always compare old and new part (in particular OE No.):
• Tootja: ESEN SKV

• Voltage [V]: 12
• Combi Switch Function: Normally Closed Contact
• Current Strength [A]: 0.25
• Thread Size: M10x1
• Spanner Size: 24
• Pressure from [bar]: 0.15
• Pressure to [bar]: 0.35
• Number of pins: 1
• Plug Type: Blade Terminal
• Corresponds to the original part in colour: blue
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Nimetus: Olisurvellitus
• Tootja: HEL

• new version:
• Outer Diameter [mm]: 20
• Number of connectors: 4
• Colour: black
• Colour Coding: blue
• Supplementary Article/Info 2: without seal ring
• Weight [kg]: 0.023
• Nimetus: ANDUR,JAHUTUSVEDELIKU TEMP.
• Tootja: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Tightening torque from [Nm]: 20
• Voltage [V]: 12
• Combi Switch Function: Normally Open Contact
• Current Strength [A]: 0.25
• Tolerance [%]: 15
• Thread Size: M10x1
• Spanner Size: 24
• Pressure from [bar]: 0.75
• Pressure to [bar]: 1.05
• Number of pins: 1
• Plug Type: Blade Terminal
• Corresponds to the original part in colour: grey
• Assy./disassy. by qualified personnel required!:
• Nimetus: HE 6ZL003259481
• Tootja: HELLA

• Number of pins: 2
• Temperature range to [°C]: 120
• Tootja: ERA

• Mootorikood: 1Z
• Thread Size: M10x1
• Spanner Size: 13
• Corresponds to the original part in colour: white
• Nimetus: ANDUR,OLITEMPERATUUR
• Tootja: EPS

• vajaminev tükihulk: 1
• Temperatuurivahemik kuni [°C]: 125
• Väliskeere [mm]: M10 x 1
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Tootja: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Sensor Type: NTC Sensor
• Mounting Type: Clamped
• Connector Shape: rectangular
• Number of pins: 4
• Socket colour: black
• for OE number: 357919501A
• Supplementary Article/Info 2: with seal ring
• Nimetus: Andur,Jahutusvedeliku temp.
• Tootja: NRF

• new version:
• Outer Diameter [mm]: 20
• Number of connectors: 4
• Colour: black
• Colour Coding: blue
• Supplementary Article/Info 2: without seal ring
• Weight [kg]: 0.023
• Nimetus: SW 30 93 0616
• Tootja: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Sensor Type: Inductive Sensor
• Number of pins: 3
• Cable Length [mm]: 521
• Tootja: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Sensor Type: NTC Sensor
• Thread Size: M10x1,0
• Spanner Size: 13
• Supplementary Article/Info 2: with seal ring
• Colour: black
• Number of pins: 1
• Nimetus: ANDUR,JAHUTUSVEDELIKU TEMP.
• Tootja: MEY
• Lisainfo: 1009190015

• Connector Shape: rectangular
• Material: Brass
• Number of pins: 2
• Plug Type: Male
• Sensor Type: NTC Sensor
• Spanner Size: 20 mm
• Thread Size: not have
• Tootja: NISSENS

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Sensor Type: NTC Sensor
• Colour: black
• Number of pins: 2
• Nimetus: ANDUR,JAHUTUSVEDELIKU TEMP.
• Tootja: MEY

• Colour: brown
• Control Range [bar]: 0.55/0.85BAR
• General Information: oil pressure switch
• Tootja: BORSEHUNG

• for OE number: 357 919 501
• Weight [kg]: 0.025
• Supplementary Article/Supplementary Info: with seal
• Colour Coding: green
• Number of pins: 4
• Tootja: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Hulk: 1
• Colour: blue
• Control Range [bar]: 0.15/0.35BAR
• General Information: oil pressure switch
• Tootja: BORSEHUNG

• Lülitusrõhk [bar]: 0,25
• Keermemõõt: M10x1
• Värv: sinine
• Tootja: METZGER

• Connector Shape: rectangular
• Material: Brass
• Number of pins: 1
• Plug Type: Male
• Sensor Type: NTC Sensor
• Spanner Size: 14 mm
• Thread Size: M10x1,0
• Nimetus: NI 207058
• Tootja: NISSENS

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Sensor Type: NTC Sensor
• Mounting Type: Clamped
• Connector Shape: rectangular
• Number of pins: 4
• Socket colour: black
• for OE number: 357919501
• Supplementary Article/Info 2: with seal ring
• Nimetus: Andur,Jahutusvedeliku temp.
• Tootja: NRF

• Thread Size: M20
• Number of pins: 4
• Fitted Diameter [mm]: 20
• Tootja: ERA

• Thread Size: M10x1.0
• Tootja: VERNET

• Mootorikood: 1Z
• Sensor Type: NTC Sensor
• Number of pins: 2
• Voltage [V]: 12
• Nimetus: Andur,sisendohu temperatuur
• Tootja: MAX

• Number of pins: 2
• Housing Colour: black
• Connector Shape: rectangular
• Guarantee: 3 years guarantee
• Weight [kg]: 0.02
• Always compare old and new part (in particular OE No.):
• Tootja: SKV GERMANY
• Nimetus: CE 17SKV680

• for OE number: 28 906 081, 95VW 12A697 DA
• Colour: black
• Number of pins: 2
• Connector Shape: rectangular
• Fabrication Number: ECT-AU-002
• Tootja: NTY

• Ehitusaasta kuni: 12.1997
• Värv: sinine
• Tootja: BOSCH

• Thread Size: M20
• Number of pins: 4
• Supplementary Article/Info 2: without cable
• Connector Shape: rectangular
• Fitted Diameter [mm]: 20
• Tootja: ERA

• Mootorikood: 1Z
• Thread Size: M10 x 1
• Spanner Size: 13
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 1
• Weight [kg]: 0.02
• Tootja: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Sensor Type: NTC Sensor
• Supplementary Article/Info 2: with seal ring
• Colour: blue, black
• Number of pins: 4
• Nimetus: ANDUR,JAHUTUSVEDELIKU TEMP.
• Tootja: MEY

• Üldine informatsioon: temperature sensor
• Tootja: VIKA

• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Always compare old and new part (in particular OE No.):
• Nimetus: CE 17SKV551
• Tootja: ESEN SKV

• Hulk: 1
• Switch Point [°C]: 140
• Outer Diameter [mm]: 20
• Weight [kg]: 0.023
• Number of connectors: 4
• Colour: black
• Colour Coding: yellow
• General Information: coolant temperature sensor
• Tootja: BORSEHUNG

• new version:
• Outer Diameter [mm]: 20
• Number of connectors: 4
• Colour: black
• Colour Coding: blue
• Weight [kg]: 0.026
• Supplementary Article/Supplementary Info: with retaining spring, with seal
• Nimetus: ANDUR,JAHUTUSVEDELIKU TEMP.
• Tootja: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 2
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Housing Colour: blue
• Number of pins: 2
• Thread Size: M12X1.5-6g
• Spanner Size: 19
• Tootja: DELPHI