• Pistikkontaktide arv: 2
• Ülekandeliinide arv: 2
• juhtmeisolatsiooni materjal: Silikoon
• Seerianumber: BWP-AU-001
• sobib pistikule: Surveliides
• Piirangutega toode/piirangu info 2: koos pistikuga

• Suitable for plug: Male
• Supplementary Article/Info 2: without plug
• Tootja: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Number of pins: 2
• Number of circuits: 2
• Supplementary Article/Info 2: with plug
• Nimetus: Paranduskomplekt, kaablikomplekt
• Tootja: ABA

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Number of pins: 4
• Plug housing design: Plug sleeve housing
• Tootja: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Number of pins: 2
• Suitable for plug: Shrink Connector
• Number of circuits: 2
• Supplementary Article/Info 2: with plug
• Nimetus: Paranduskomplekt, kaablikomplekt
• Tootja: ABA

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Number of pins: 1
• Tootja: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Supplementary Article/Info 2: with plug
• Supplementary Article/Supplementary Info: with gaskets/seals
• Number of pins: 1
• Suitable for plug: Female
• Nimetus: Paranduskomplekt, kaablikomplekt
• Tootja: ABA

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Number of pins: 4
• Number of circuits: 4
• Supplementary Article/Info 2: with plug
• Suitable for plug: Female
• Tootja: DEPO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Ehitusaasta kuni: 05.2011
• Kerenumber (VIN) kuni: 5N-B-600000
• Fitting Position: at headlight, Left Front, Right Front
• Lamp Type: H7
• Cable Length [mm]: 220
• Supplementary Article/Supplementary Info: with shrink connector
• Number of circuits: 2
• Weight [kg]: 0.012
• Alternatively:
• Length [mm]: 220
• Tootja: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Piirangutega toode/piirangu info: koos lisadega
• Pistikkontaktide arv: 2
• Ülekandeliinide arv: 2
• Kaal (kg): 0,02
• Garantii: 3 aastat garantii
• Nimetus: CE 53SKV114
• Tootja: ESEN SKV

• Installatsiooni pool: Pidurisadulal, Tagasild mõlemapoolselt
• Pistikkontaktide arv: 2
• Pistikute teostus: Female
• Kaal (kg): 0,02
• Garantii: 3 aastat garantii
• Nimetus: CE 53SKV100
• Tootja: ESEN SKV

• Fitting Position: Engine Compartment
• Cable Length [mm]: 250
• Mounting Type: Plug-in connection
• Supplementary Article/Supplementary Info: with shrink connector
• Supplementary Article/Info 2: with plug
• Number of circuits: 4
• Weight [kg]: 0.044
• Tootja: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Cable Length [mm]: 250
• Number of circuits: 1
• Cable Cross Section [mm²]: 0.75
• Plug Type: Shrink Connector
• Material: CuSn (copper-tin)
• Cable insulation material: Silicone
• Nimetus: Paranduskomplekt, kaablikomplekt
• Tootja: MD

• Number of pins: 6
• Number of circuits: 6
• Supplementary Article/Info 2: with plug
• Nimetus: Paranduskomplekt, kaablikomplekt
• Tootja: ABA

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Number of pins: 4
• Number of circuits: 4
• Supplementary Article/Info 2: with plug
• Tootja: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Tehnilisi andmeid jälgida:
• Tootja piirang: VAG
• Kaablipikkus (mm): 200
• Pistikuteostus-ID: Code I
• Pistikkontaktide arv: 8
• Kaabli ristlõige [mm²]: 0,75
• Kokkupuutepind: kullatud
• Asetuslaius (mm): 1,6
• Piirangutega toode/piirangu info: Pistikuhülsi korpusega, koos tihenditega
• Piirangutega toode/piirangu info 2: koos ühendusega
• juhtmeisolatsiooni materjal: Silikoon
• temperatuurivahemik alates [°C]: −25
• Temperatuurivahemik kuni [°C]: +140
• Pistiku kesta tüüp: Pistikuhülsi korpus
• SVHC: SVHS aineid ei esine
• Nimetus: Kaabli remondikomplekt, tagatuli
• Tootja: HBE

• Installatsiooni pool: ees, sees, taga
• Plokieraldus:
• Plug Type: Blade Terminal
• Supplementary Article/Supplementary Info: with shrink squeeze connector, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Housing Colour: black
• Number of pins: 3
• Weight [kg]: 0.013
• Tootja: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of circuits: 28
• Fitting Position: Front and Rear, both sides
• Cable Length [mm]: 420
• Weight [kg]: 0.152
• Observe service information:
• Tootja: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front, Vehicle Door
• Cable Length [mm]: 400
• Mounting Type: Partially assembled
• Supplementary Article/Supplementary Info: without shrink squeeze connector
• Supplementary Article/Info 2: with vehicle-specific adaptor
• Number of circuits: 28
• Weight [kg]: 0.171
• Tootja: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Cable Length [mm]: 400, 420
• Conductor Number: 28
• Cable cross-section from [mm²]: 0.5
• Material: CuSn (copper-tin)
• Cable insulation material: Silicone
• Supplementary Article/Info 2: without bellow
• Number of circuits: 28
• Cable cross-section to [mm²]: 2.5
• Nimetus: Paranduskomplekt, kaablikomplekt
• Tootja: MD

Fitting Position: Left Rear, Right Rear, Left Front, Right Front, Vehicle Door

• valikuliselt:
• Cable Length [mm]: 400, 420
• Conductor Number: 28
• Cable cross-section from [mm²]: 0.5
• Cable cross-section to [mm²]: 2.5
• Material: CuSn (copper-tin)
• Cable insulation material: Silicone
• Supplementary Article/Info 2: without bellow
• Number of circuits: 28
• Plug Type: Butt Joint
• Tootja: MEAT&DORIA

Sõidukivarustus: ilma koaksiaalkaablita juhtmekomplektis sõidukite jaoks Fitting Position: Left Rear, Right Rear, Left Front, Right Front, Vehicle Door

• Number of circuits: 28
• Supplementary Article/Supplementary Info: with squeeze connector
• Fitting Position: both sides, Front and Rear
• Cable Length [mm]: 420
• Weight [kg]: 0.178
• Observe service information:
• Tootja: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• juhtmeisolatsiooni materjal: Silikoon
• Piirangutega toode/piirangu info: ilma lisavarustuseta
• Materjal: CuSn (vask-tina)
• Kaablipikkus (mm): 400
• Ülekandeliinide arv: 28
• Kaabli ristlõige kuni [mm²]: 2,5
• alternatiivne remondikomplekt: 2321033, 2321034
• Tootja: METZGER

Installatsiooni pool: Sõiduki uks, ees vasakul, ees paremal, taga vasakul, taga paremal

• Number of circuits: 28
• Supplementary Article/Supplementary Info: with shrink connector
• Fitting Position: Front and Rear, both sides
• Cable Length [mm]: 420
• Weight [kg]: 0.176
• Observe service information:
• Tootja: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• valikuliselt:
• Fitting Position: Vehicle Door, Front
• Cable Length [mm]: 400
• Mounting Type: Partially assembled
• Supplementary Article/Supplementary Info: with shrink squeeze connector
• Supplementary Article/Info 2: with vehicle-specific adaptor
• Plug Type: Shrink Connector
• Number of circuits: 28
• Weight [kg]: 0.192
• Tootja: VEMO GERMANY

Sõidukivarustus: ilma koaksiaalkaablita juhtmekomplektis sõidukite jaoks General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• valikuliselt:
• Manufacturer Restriction: Seat, Skoda, VW
• Fitting Position: Front and Rear, both sides
• Conductor Number: 28
• Cable Length [mm]: 400
• Cable insulation material: Silicone
• Cross Section [mm²] from: 0.5
• Cross Section [mm²] to: 2.5
• SVHC: No SVHC present!
• Nimetus: Kaabli remondikomplekt, uks
• Tootja: HBE

Sõidukivarustus: ilma koaksiaalkaablita juhtmekomplektis sõidukite jaoks Supplementary Article/Supplementary Info: with isolation tape, with cable tie, with socket housing, with shrink squeeze connector

• valikuliselt:
• Cable Length [mm]: 400, 420
• Conductor Number: 28
• Cable cross-section from [mm²]: 0.5
• Cable cross-section to [mm²]: 2.5
• Material: CuSn (copper-tin)
• Cable insulation material: Silicone
• Supplementary Article/Info 2: without bellow
• Number of circuits: 28
• Plug Type: Shrink Connector
• Tootja: MEAT&DORIA

Sõidukivarustus: ilma koaksiaalkaablita juhtmekomplektis sõidukite jaoks Fitting Position: Left Rear, Right Rear, Left Front, Right Front, Vehicle Door

• valikuliselt:
• juhtmeisolatsiooni materjal: Silikoon
• Piirangutega toode/piirangu info 2: ilma kaitsekummita
• Kaablipikkus (mm): 400
• Ülekandeliinide arv: 28
• Kaabli ristlõige kuni [mm²]: 2,5
• Materjal: CuSn (vask-tina)
• alternatiivne remondikomplekt: 2321032, 2321033
• Tootja: METZGER

Sõidukivarustus: ilma koaksiaalkaablita juhtmekomplektis sõidukite jaoks Installatsiooni pool: Sõiduki uks, ees vasakul, ees paremal, taga vasakul, taga paremal Piirangutega toode/piirangu info: pressliidesega, mitte veetihe, ilma termokahaneva voolikuta