Lisainfo: Rubber mount for wishbone, rear

Lisainfo: Rubber mount for wishbone, front

• Fitting Position: Front Axle Left, Front Axle Right, Lower, Front
• Material: Rubber/Metal
• Thickness [mm]: 60
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 36, 43
• Tootja: MERTZ

• Fitting Position: Front, Lower, Front Axle Right, Front Axle Left
• Height [mm]: 60
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 36
• Nimetus: Puks - K„„ndmik OPEL P. ASTRA G
• Tootja: MAX

• Installatsiooni pool: Esisild, all, ees
• Tootja: DELPHI
• Nimetus: DE TD332W

• Installatsiooni pool: Esisild, kese
• Laagritüüp: Kummi-metalllaager
• Roolimisliik: õõtshoova jaoks
• Kaal (kg): 0,16
• Nimetus: DY 37-08014-6
• Tootja: DYS

• Fitting Position: Front Axle, both sides, Front, Lower
• Tootja: TRW
• Lisainfo: JBU137 TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front, Lower, Front Axle Right, Front Axle Left
• Height [mm]: 60
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 36
• Nimetus: Puks - K„„ndmik OPEL P. ASTRA G
• Tootja: MAX

• Installatsiooni pool: Esisild, all, ees
• Siseläbimõõt [mm]: 12
• Välisläbimõõt [mm]: 36
• Kõrgus (mm): 60
• Nimetus: ALT 82223AL
• Tootja: ALTE AUTOMOTIVE

• Installatsiooni pool: esisild alla, all
• Tootja: GSP

• Installatsiooni pool: Esisild, ees
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 35.5
• Width [mm]: 60
• SVHC: No SVHC present!
• Nimetus: Puks
• Tootja: FAG

• Fitting Position: both sides, Lower Front Axle, Front
• Required quantity: 2
• Nimetus: Puks - K„„ndmik OPEL P. ASTRA G
• Tootja: TED

• Fitting Position: Front, Lower, Front Axle Left, Front Axle Right
• Height [mm]: 60
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 36
• Supplementary Article/Supplementary Info: without holder
• Required quantity: 2
• replacement in pairs recommended:
• Nimetus: Puks - K„„ndmik OPEL P. ASTRA G/ZA
• Tootja: MEY

• Fitting Position: Front Axle, Front, both sides
• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber Mount
• Tootja: FAST

• Fitting Position: Front Axle, both sides, Front, Lower
• Nimetus:
• Tootja: LMI

SVHC: No information available, please contact the manufacturer!

• Installatsiooni pool: Tagasild, kahepoolne, all, taga, väljas
• Roolimisliik: õõtshoova jaoks
• vajaminev tükihulk: 2
• Nimetus: Paigutus - K„„ndmik OPEL T. VECTRA C
• Tootja: TED

• Fitting Position: Rear Axle Upper, inner
• Required quantity: 2
• Tootja: TED

Nimetus: Puks - K„„ndmik OPEL T. VECTRA C GàRNEGO WEWN¨TRZNA

• Installatsiooni pool: Esisild
• Roolimisliik: õõtshoova jaoks
• Laagritüüp: Kummi-metalllaager
• Kaal (kg): 0,32
• Nimetus: DY 29-24061
• Tootja: DYS

• Fitting Position: Rear Axle, Front, Upper
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 35.4
• for OE number: Part of 423035
• paired article number: 2256109
• Tootja: SASIC

• Installatsiooni pool: Tagasild mõlemapoolselt, all, sees
• Siseläbimõõt [mm]: 14
• Välisläbimõõt [mm]: 40
• Kõrgus (mm): 47
• Nimetus: ALT 93974AL
• Tootja: ALTE AUTOMOTIVE

• Quality: OE Performance
• Fitting Position: Rear
• Colour: silver
• Weight [g]: 123
• Tootja: GATES PASKI PRZEWODY

• Installatsiooni pool: Tagasild mõlemapoolselt, all, sees
• Siseläbimõõt [mm]: 12
• Välisläbimõõt [mm]: 40
• Kõrgus (mm): 47
• Nimetus: ALT 93973AL
• Tootja: ALTE AUTOMOTIVE

• Installatsiooni pool: Tagasild, all, taga
• Siseläbimõõt [mm]: 12
• Välisläbimõõt [mm]: 45
• Kõrgus (mm): 52
• Nimetus: ALT 86439AL
• Tootja: ALTE AUTOMOTIVE

• Fitting Position: Rear Axle Upper
• Fabrication Number: ZTT-PL-008A
• Tootja: NTY

• Fitting Position: Rear Axle, both sides, Front
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for trailing arm
• Required quantity: 2
• Nimetus: Puks - K„„ndmik OPEL T. VECTRA C
• Tootja: TED

• Fitting Position: Rear Axle
• Weight [kg]: 0.132
• Mounting Type: Rubber Mount
• Packaging length [cm]: 5.2
• Packaging width [cm]: 4.5
• Packaging height [cm]: 4.5
• Tootja: FEBEST

• Fitting Position: Rear Axle, Rear, Upper
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 47.3
• for OE number: Part of 423035
• paired article number: 2256141
• Nimetus: Puks
• Tootja: SAS

• Fitting Position: Rear Axle, both sides, Lower, Rear, inner
• Required quantity: 2
• Nimetus: Puks - K„„ndmik OPEL T. VECTRA C WEW
• Tootja: TED
• Lisainfo: 00502040 TED

• Installatsiooni pool: Tagasild mõlemapoolselt, all
• vajaminev tükihulk: 2
• paired article number: VKDS 435002
• Length [mm]: 65
• Inner Diameter [mm]: 12.8
• Outer Diameter [mm]: 70.3
• Tootja: SKF
• Nimetus: SK VKDS435002

• Fitting Position: Rear Axle
• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Weight [g]: 274
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 70
• Length [mm]: 44
• Overall Length [mm]: 65
• Nimetus: IM 1580
• Tootja: ORIGINAL IMPERIUM

• Fitting Position: Rear Axle Left, Rear Axle Right, Upper
• Control/Trailing Arm Type: for control arm
• Lisainfo: Control Arm-/Trailing Arm Bush

• Installatsiooni pool: Tagasild, üleval, ees
• Siseläbimõõt [mm]: 12
• Välisläbimõõt [mm]: 70
• Kõrgus (mm): 65
• Nimetus: ALT 86361AL
• Tootja: ALTE AUTOMOTIVE

• Fitting Position: Rear Axle, Left, Upper, Right
• Bore Ø [mm]: 14.6
• Weight [g]: 303
• Nimetus: IM 1590
• Tootja: ORIGINAL IMPERIUM

• Fitting Position: Rear Axle, both sides, Front, outer
• Required quantity: 2
• Control/Trailing Arm Type: for control arm
• Tootja: TEDGUM
• Nimetus: TG 00505315

• Control/Trailing Arm Type: for control arm
• Fitting Position: Rear Axle Upper, outer
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 47
• Required quantity: 2
• Tootja: TED

Nimetus: Puks - K„„ndmik OPEL T. VECTRA C 04- FIAT CROMA 05- WAHLIWA

• Roolimisliik: õõtshoova jaoks
• Fitting Position: Rear Axle, Front, inner
• Required quantity: 2
• Nimetus: Puks - K„„ndmik OPEL T. VECTRA C
• Tootja: TED

• Fitting Position: Rear Axle Upper, outer
• Control/Trailing Arm Type: for control arm
• Outer Diameter [mm]: 47
• Inner Diameter [mm]: 14
• Required quantity: 2
• Tootja: TED

Nimetus: Puks - K„„ndmik OPEL T. VECTRA C/SAAB 9-3 02- !!!WAHACZ POPRZECZNY!!!

• Installatsiooni pool: Tagasild, väljas, üleval
• Inner Diameter 1 [mm]: 14
• Outer Diameter 1 [mm]: 47
• Thickness 1 [mm]: 54
• Tootja: DELPHI
• Nimetus: DE TD554W

• Fitting Position: Rear Axle, both sides, outer
• Nimetus: Puks
• Tootja: LMI

SVHC: No information available, please contact the manufacturer!

• Installatsiooni pool: Tagasild, üleval, väljas
• Siseläbimõõt [mm]: 14
• Välisläbimõõt [mm]: 47
• Kõrgus (mm): 54
• Nimetus: ALT 95812AL
• Tootja: ALTE AUTOMOTIVE

• Fitting Position: Upper
• Length [mm]: 24.93, 52
• Weight [kg]: 0.49
• Inner Diameter [mm]: 12.15, 14.05
• Outer Diameter [mm]: 35.3, 47.25
• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Weight [g]: 490
• Tootja: METALCAUCHO

• Fitting Position: Rear Axle, Lower
• Control/Trailing Arm Type: for control arm
• Axle alignment required after fitting:
• Weight [kg]: 0.835
• Tootja: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle both sides, Rear
• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Tootja: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle, Rear, both sides, Lower
• Mounting Type: Hydro Mount
• Outer Diameter [mm]: 78
• Inner Diameter [mm]: 19
• Nimetus: Puks - K„„ndmik OPEL P. VECTRA C LE/PR TY
• Tootja: MAX

• Fitting Position: Front Axle Left, Front Axle Right, Lower
• Control/Trailing Arm Type: for control arm
• Lisainfo: Rubber mount rear for wishbone, front

• Inner Diameter [mm]: 19
• Fitting Position: Lower Front Axle, Rear, both sides
• Required quantity: 2
• Tootja: TEDGUM

• Supplementary Article/Supplementary Info: with holder
• Fabrication Number: ZTP-PL-006B
• Tootja: NTY

Fitting Position: Front Axle, inner, behind the axle, Left, Right, Lower

• Fitting Position: Lower Front Axle, both sides
• Required quantity: 2
• Tootja: TEDGUM
• Nimetus: TG 00506016

• Fitting Position: Left, Right, Lower, Front Axle
• Weight [g]: 824
• Version: Non Idraulico
• Nimetus: IM 1849
• Tootja: ORIGINAL IMPERIUM

• Fitting Position: Front Axle
• Weight [kg]: 1.005
• Inner Diameter [mm]: 19
• Outer Diameter [mm]: 77.5
• Mounting Type: Rubber-Metal Mount
• Tootja: METALCAUCHO

• Fitting Position: Front Axle, Rear, both sides
• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Tootja: FAST

• Ehitusaasta alates: 08.2005
• Fitting Position: Lower Front Axle
• Weight [kg]: 1.04
• Warranty: 3 years warranty
• Tootja: SKV GERMANY
• Nimetus: CE 04SKV008

• Installatsiooni pool: Esisild, taga, all
• Inner Diameter 1 [mm]: 19
• Outer Diameter 1 [mm]: 78
• Thickness 1 [mm]: 64
• Nimetus: DE TD507W
• Tootja: DELPHI

• Installatsiooni pool: Esisild, sees, all, taga
• Net weight [kg]: 1.01
• Nimetus: Puks - K„„ndmik OPEL P. VECTRA C LE/PR TY
• Tootja: NK

• Fitting Position: Rear Axle Upper, inner
• Weight [kg]: 0.218
• Mounting Type: Rubber-Metal Mount
• Packaging length [cm]: 6.2
• Packaging width [cm]: 3.5
• Packaging height [cm]: 3.5
• Tootja: FEBEST

• Installatsiooni pool: Esisild, all, taga
• Siseläbimõõt [mm]: 20
• Välisläbimõõt [mm]: 70
• Kõrgus (mm): 64
• Nimetus: ALT 83209AL
• Tootja: ALTE AUTOMOTIVE

• Installatsiooni pool: Esisild, väljas
• Laagritüüp: Kummi-metalllaager
• Roolimisliik: õõtshoova jaoks
• Kaal (kg): 0,94
• Nimetus: DY 37-08040-5
• Tootja: DYS

• Installatsiooni pool: taga, all, esisild mõlemapoolselt
• vajaminev tükihulk: 2
• paired article number: VKDS 335008
• Height [mm]: 63.5
• Inner Diameter [mm]: 19.5
• Outer Diameter [mm]: 70.2
• Nimetus: SK VKDS335008
• Tootja: SKF

• for OE number: 093171448
• Fitting Position: Lower Front Axle
• Tootja: GSP

• Fitting Position: Rear, Lower, Front Axle Left, Front Axle Right
• Inner Diameter [mm]: 19
• Supplementary Article/Supplementary Info: with accessories
• Supplementary Article/Info 2: with rubber mount
• Required quantity: 2
• Nimetus: Puks - K„„ndmik OPEL P. VECTRA C LE/PR TY
• Tootja: MEY

• Thickness [mm]: 63.5
• Inner Diameter [mm]: 19.5
• Outer Diameter [mm]: 78
• Control/Trailing Arm Type: for control arm
• Fitting Position: Front Axle Left, Lower, Front Axle Right
• Weight [kg]: 1.005
• Observe service information:
• Nimetus: Puks - K„„ndmik OPEL P. VECTRA C LE/PR TY
• Tootja: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thickness [mm]: 63.5
• Inner Diameter [mm]: 19.5
• Outer Diameter [mm]: 78
• Control/Trailing Arm Type: for control arm
• Fitting Position: Front Axle Left, Lower, Front Axle Right
• Weight [kg]: 1.005
• Observe service information:
• Nimetus: SW 40 92 3003
• Tootja: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Mounting Type: Hydro Mount
• Supplementary Article/Supplementary Info: without accessories
• Fitting Position: Front Axle Left, Front Axle Right, Rear
• Nimetus: Puks - K„„ndmik OPEL P. VECTRA C LE/PR TY
• Tootja: LMI

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle, Rear, both sides, Lower
• Mounting Type: Hydro Mount
• Outer Diameter [mm]: 77.5
• Inner Diameter [mm]: 19
• Quantity per axle: 2
• Tootja: TRW

SVHC: No information available, please contact the manufacturer!