• Installatsiooni pool: vasakul
• OE-numbri jaoks: 1001702
• Lambda andur: Sond
• Väljalaskesüsteem: eelkatalüsaatori jaoks
• for OE number: 1001702
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 376
• Number of pins: 4
• Weight [g]: 93
• Lambda Sensor: Heated, Finger probe, Lambda Sensor
• Gross Weight [g]: 123
• Tootja: DENSO

Lisainfo: "Tootja: DENSO
MONDEO I SEDAN (GBP)
(kvaliteediklass: Q)"

• Lambda andur: Diagnoosisond, Keere eelmääritud
• Seerianumber: ESL-SK-000
• Tootja: NTY
• Nimetus: NTY ESL-SK-000

• Mootorikood: LCBA
• Ehitusaasta alates: 08.2000, 09.2000
• Ehitusaasta kuni: 12.2000
• Lambda andur: Diagnoosisond, Sond
• Plokieraldus:
• Installatsiooni pool: katalüsaatori ees, pärast katalüsaatorit
• Lambda Sensor: Heated
• Number of circuits: 4
• Overall Length [mm]: 422
• Nimetus: Lambda andur
• Tootja: MAX

• Lambda andur: Bistabiilne andur, Keere eelmääritud
• Seerianumber: ESL-UV-001
• Tootja: NTY
• Nimetus: NTY ESL-UV-001

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Tootja: KAMOKA

• Mootorikood: LCBA
• Ehitusaasta kuni: 08.2000
• Lambda andur: Sond
• Installatsiooni pool: katalüsaatori ees
• Lambda Sensor: Lambda Sensor
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Nimetus: LAMBDA ANDUR
• Tootja: MAX

• Technical Information Number: Universal
• Overall Length [mm]: 325
• Number of pins: 4
• Lambda Sensor: Regulating Probe
• Tootja: ASHIKA
• Lisainfo: 43-U04

• Technical Information Number: Universal
• Overall Length [mm]: 325
• Number of pins: 4
• Lambda Sensor: Regulating Probe
• Tootja: JAPKO

• Lambda andur: Bistabiilne andur
• Garantii: 3 aastat garantii
• Kaal (kg): 0,12
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Tootja: SKV GERMANY
• Nimetus: CE 09SKV121

• Lambda andur: Bistabiilne andur
• Pinge [V]: 12
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 4
• Kaal (kg): 0,14
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Tootja: SKV GERMANY

• Installatsiooni pool: vasakul
• Lambda andur: Sond
• Väljalaskesüsteem: eelkatalüsaatori jaoks
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 103
• Lambda Sensor: Heated, Finger probe, Lambda Sensor
• Gross Weight [g]: 152
• Tootja: DENSO
• Nimetus: DN DOX-0119
• Kvaliteediklass: Q

Lisainfo: "Tootja: DENSO
ESCORT VII SEDAN (GA
(kvaliteediklass: Q)"

• Resistor [Ohm]: 4.5
• Length [mm]: 680
• Number of circuits: 4
• Conductor Number: 4
• Cable Length [mm]: 680
• Lambda Sensor: Heated
• Nimetus: LAMBDA ANDUR
• Tootja: MAG

• Lambda andur: Sond
• Installatsiooni pool: katalüsaatori ees
• Cable Length [mm]: 390
• Lambda Sensor: Planar probe, Heated
• Nimetus: LAMBDA ANDUR
• Tootja: DLP

Lisainfo: "Tootja: DELPHI
GALAXY (WGR), 03.95-
(kvaliteediklass: PJ)"

• Lambda andur: Sond
• Pinge [V]: 12
• Garantii: 3 aastat garantii
• Kaal (kg): 0,11
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Nimetus: CE 09SKV101
• Tootja: ESEN SKV

• Lambda andur: Bistabiilne andur
• Pinge [V]: 12
• Pikkus (mm): 393
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 4
• Kaal (kg): 0,1
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Nimetus: CE 09SKV048
• Tootja: ESEN SKV

• Length [mm]: 400
• Resistor [Ohm]: 4.5
• Conductor Number: 4
• Number of circuits: 4
• Cable Length [mm]: 400
• Lambda Sensor: Heated
• Nimetus: LAMBDA ANDUR
• Tootja: MAG

• Mootorikood: LCBA
• Ehitusaasta kuni: 12.2000
• Lambda andur: Diagnoosisond, Sond
• Installatsiooni pool: pärast katalüsaatorit, katalüsaatori ees
• Plokieraldus:
• Ehitusaasta alates: 09.2000
• Number of circuits: 4
• Overall Length [mm]: 422
• Available as universal article as well, see article no.: 0258005729
• Recommended change interval [km]: 160,000
• Nimetus: LAMBDA ANDUR
• Tootja: BOS

• Ehitusaasta kuni: 08.2000
• Lambda andur: Sond
• Installatsiooni pool: Väljalaskekollektor
• Lambda Sensor: Heated
• Number of pins: 4
• Cable Length [mm]: 260
• for article number: 81048
• Tootja: MEAT&DORIA

• Ehitusaasta alates: 08.2000
• Lambda andur: Diagnoosisond
• Lambda Sensor: Heated
• Number of pins: 4
• Cable Length [mm]: 670
• for article number: 81029E
• Quality: OE EQUIVALENT
• Tootja: MEAT&DORIA

• Mootorikood: LCBA
• Ehitusaasta kuni: 08.2000
• Lambda andur: Sond
• Installatsiooni pool: katalüsaatori ees
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Nimetus: LAMBDA ANDUR
• Tootja: BOS

• Lambda andur: Sond
• Installatsiooni pool: katalüsaatori ees
• Cable Length [mm]: 339
• Lambda Sensor: Planar probe, Heated
• Tootja: DELPHI
• Nimetus: DE ES20318-12B1

• Lambda andur: Diagnoosisond
• Pinge [V]: 12
• Pikkus (mm): 400
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 4
• Kaal (kg): 0,12
• Takistus [oom]: 6
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Tootja: SKV GERMANY

• Ehitusaasta alates: 09.2000
• Ehitusaasta kuni: 12.2000
• Lambda andur: Sond
• Installatsiooni pool: Väljalaskekollektor
• Lambda Sensor: Heated
• Number of pins: 4
• Cable Length [mm]: 290
• for article number: 81718E
• Quality: OE EQUIVALENT
• Tootja: MEAT&DORIA

• Ehitusaasta kuni: 09.2000
• Lambda andur: Sond
• Line insulation design: with silicone-coated woven-fibre insulation
• Lambda Sensor: Finger probe, Heated, Thread pre-greased
• Number of pins: 4
• for OE number: V99760001
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Length [mm]: 350
• Exhaust System: after catalytic converter
• Tootja: VEMO GERMANY

Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Mootorikood: LCBA
• Ehitusaasta kuni: 12.2000
• Lambda andur: Diagnoosisond, Sond
• Installatsiooni pool: pärast katalüsaatorit, katalüsaatori ees
• Plokieraldus:
• Ehitusaasta alates: 09.2000
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Nimetus: LAMBDA ANDUR
• Tootja: BOS

• Ehitusaasta alates: 10.1998
• Ehitusaasta kuni: 12.2000
• Hulk: 2
• Installatsiooni pool: katalüsaatori ees
• Line insulation design: with silicone-coated woven-fibre insulation
• Lambda Sensor: Planar probe, Heated, Thread pre-greased
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Tootja: VEMO GERMANY

Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Ehitusaasta alates: 09.1998
• Ehitusaasta kuni: 06.2000
• Mootorikood: LCBA
• Fitting Position: before catalytic converter
• Lambda Sensor: Planar probe, Thread pre-greased, Heated
• Number of pins: 4
• Cable Length [mm]: 350
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Tootja: VALEO

• Lambda andur: Sond
• Lambda Sensor: Heated
• Length [mm]: 360
• Number of pins: 4
• Technical Information Number: Universal 77004
• Tootja: FAE

• Mootorikood: LCBA
• Ehitusaasta kuni: 08.2000
• Lambda andur: Sond
• Installatsiooni pool: katalüsaatori ees
• Number of circuits: 4
• Overall Length [mm]: 256
• Available as universal article as well, see article no.: 0258986507
• Recommended change interval [km]: 160,000
• Nimetus: LAMBDA ANDUR
• Tootja: BOS

• Ehitusaasta alates: 09.2000
• Ehitusaasta kuni: 12.2000
• Lambda andur: Sond
• Installatsiooni pool: Väljalaskekollektor
• Lambda Sensor: Heated
• Number of pins: 4
• Cable Length [mm]: 290
• for article number: 81718
• Tootja: MEAT&DORIA

• Ehitusaasta alates: 09.1998
• Ehitusaasta kuni: 06.2000
• Lambda andur: Diagnoosisond, Sond
• Installatsiooni pool: pärast katalüsaatorit, vasakul, katalüsaatori ees
• Plokieraldus:
• Length [mm]: 400
• Number of circuits: 4
• Tootja: VDO

• Lambda Sensor: Regulating Probe
• Length [mm]: 400
• Technical Information Number: Universal 77015
• Fitting Position: before catalytic converter
• Tootja: FAE

• Installatsiooni pool: katalüsaatori ees
• Lambda Sensor: Heated
• Cable Length [mm]: 350
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Tootja: HELLA
• Nimetus: HE 6PA358103381

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Ehitusaasta kuni: 06.2000
• Lambda andur: Sond
• Installatsiooni pool: Väljalaskekollektor
• Line insulation design: with silicone-coated woven-fibre insulation
• Connector Shape: D Shape
• Conductor Number: 4
• Exhaust System: after catalytic converter
• Cable Length [mm]: 450
• Lambda Sensor: Thread pre-greased
• Tootja: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.