Lisainfo: Aukudearv 1: 1 Puurauguvahe 1 (mm): 108 Läbimõõt [mm]: 302
(AM)

• Installatsiooni pool: Tagasild
• Piduriketta liik: täis
• Välisläbimõõt [mm]: 302
• Pidurikettajämedus [mm]: 11
• Aukude arv: 5
• Pealispind: kaetud
• Tootja: JP GROUP
• Lisainfo: Brake Disc

• Installatsiooni pool: Esisild
• Piduriketta liik: sisemine õhutus
• Välisläbimõõt [mm]: 300
• Pidurikettajämedus [mm]: 28
• Aukude arv: 5
• Pealispind: kaetud
• Tootja: JP GROUP
• Lisainfo: Brake disc, front, ventilated, 300x28 mm

• Installatsiooni pool: Esisild
• Kogus pakendis: 2
• Kontrolltähistus: ECE-R90
• Kõrgus (mm): 44
• Piduriketta liik: täis
• Pidurikettajämedus [mm]: 12
• Välisläbimõõt [mm]: 247
• Aukude arv: 6
• Ava Ø (mm): 60
• Tootja: METELLI UKL.HAMULCOWY

• Installatsiooni pool: Tagasild
• Piduriketta liik: täis
• Pidurikettajämedus [mm]: 11
• Välisläbimõõt [mm]: 302
• Ava Ø (mm): 108
• Tootja: DELLO AUTOMEGA
• Kogus pakendis: 2

• Piduriketta liik: täis
• Pidurikettajämedus [mm]: 11
• Välisläbimõõt [mm]: 302
• Aukude arv: 5
• Tsentri läbimõõt (mm): 63,5
• Kõrgus (mm): 50,8
• Ava Ø (mm): 108
• Installatsiooni pool: Tagasild
• Miinimumjämedus (mm): 9
• Nimetus: PIDURIKETAS
• Tootja: MAX

• Installatsiooni pool: Tagasild
• Minimum thickness [mm]: 9
• Brake Disc Type: solid
• Bore Diameter [mm]: 15.8
• Brake Disc Thickness [mm]: 10.9
• Bolt Hole Circle Ø [mm]: 108
• Number of Holes: 5
• Inner Diameter [mm]: 177.6
• Height [mm]: 50.8
• Centering Diameter [mm]: 63.5
• Outer Diameter [mm]: 302
• Tootja: DENCKERMANN ZAWIESZENIE
• Kogus pakendis: 2

• Installatsiooni pool: Tagasild
• Kogus pakendis: 2
• Outer Diameter [mm]: 302
• Brake Disc Thickness [mm]: 10.9
• Brake Disc Type: solid
• Number of Holes: 5
• Bolt Hole Circle Ø [mm]: 108
• Height [mm]: 50.8
• Centering Diameter [mm]: 63.5
• Test Mark: ECE R90
• Article number of recommended accessories: 131-07-621, 131-07-622
• Replace in pairs only:
• Required quantity: 2
• Tootja: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Pidurikettajämedus [mm]: 11
• Veljeaukude hulk: 5
• Jämedus/Tugevus (mm): 51
• Välisläbimõõt [mm]: 302
• Ava Ø (mm): 108
• Pealispind: kaetud
• Piduriketta liik: täis
• Installatsiooni pool: Tagasild
• Miinimumjämedus (mm): 9
• Tsentri läbimõõt (mm): 63,6
• Kaal (kg): 5,57
• Hooldusinfot jälgida:
• Tootja: BLUE PRINT
• Kogus pakendis: 2

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pidurikettajämedus [mm]: 11
• Veljeaukude hulk: 5
• Jämedus/Tugevus (mm): 50,8
• Välisläbimõõt [mm]: 302
• Ava Ø (mm): 108
• Pealispind: kaetud
• Piduriketta liik: täis
• Installatsiooni pool: Tagasild
• Miinimumjämedus (mm): 9
• Tsentri läbimõõt (mm): 63,6
• Kaal (kg): 5,57
• Hooldusinfot jälgida:
• Tootja: FEBI BILSTEIN
• Kogus pakendis: 2

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Piduriketta liik: õhutusega
• Välisläbimõõt [mm]: 300
• Pidurikettajämedus [mm]: 28
• Kõrgus (mm): 52
• Aukude arv: 5
• Tsentri läbimõõt (mm): 63,5
• Ava Ø (mm): 108
• Installatsiooni pool: Esisild
• Miinimumjämedus (mm): 26
• Pealispind: õlitatud
• Nimetus: PIDURIKETAS
• Tootja: MAX
• Lisainfo: 19-1332

• Pidurikettajämedus [mm]: 11
• Veljeaukude hulk: 5
• Jämedus/Tugevus (mm): 50,8
• Välisläbimõõt [mm]: 302
• Ava Ø (mm): 108
• Pealispind: kaetud
• Piduriketta liik: täis
• Installatsiooni pool: Tagasild
• Miinimumjämedus (mm): 9
• Tsentri läbimõõt (mm): 63,6
• Kaal (kg): 5,57
• Nimetus: SW 50 93 0721
• Tootja: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Kogus pakendis: 2
• Installatsiooni pool: Tagasild
• Piduriketta liik: täis
• Pealispind: kaetud
• Välisläbimõõt [mm]: 302
• Pidurikettajämedus [mm]: 11
• Tsentri läbimõõt (mm): 63,6
• Kõrgus (mm): 50,8
• Miinimumjämedus (mm): 9
• Veljeaukude hulk: 5
• Kinnitusaukude hulk: 1
• Kaal (kg): 10,45
• Tootja: VALEO TARCZE

• Installatsiooni pool: Tagasild
• Kogus pakendis: 2
• Piduriketta liik: täis
• Aukude arv: 5
• Kontrolltähistus: E4 90R-02C0703/2622
• Pealispind: kaetud
• Välisläbimõõt [mm]: 302
• Pidurikettajämedus [mm]: 11
• Miinimumjämedus (mm): 9
• Tsentri läbimõõt (mm): 63,6
• Kõrgus (mm): 50,8
• Tootja: DELPHI LOCKHEED HAMULCE
• Nimetus: DE BG4063C

• Kogus pakendis: 2
• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 11
• Outer Diameter [mm]: 302
• Height [mm]: 50.8
• Number of Holes: 5
• Centering Diameter [mm]: 63.5
• Bolt Hole Circle Ø [mm]: 108
• Surface: Painted
• Weight [kg]: 11.05
• Minimum thickness [mm]: 9
• Tootja: TOMEX BRAKES

• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 10.9
• Outer Diameter [mm]: 302
• Weight [kg]: 5.22
• Height [mm]: 50.8
• Number of Holes: 5
• Bolt Hole Circle Ø [mm]: 108
• Centering Diameter [mm]: 63.6
• Surface: Coated
• Minimum thickness [mm]: 9
• Bore Diameter up to [mm]: 15.9
• Nimetus: ALT 127953FCAL
• Tootja: ALTE AUTOMOTIVE

• Installatsiooni pool: Tagasild
• Outer Diameter [mm]: 302
• Brake Disc Thickness [mm]: 11
• Height [mm]: 50.8
• Rim Hole Number: 5
• Brake Disc Type: solid
• Bolt Hole Circle Ø [mm]: 108
• Surface: Coated
• Hub Diameter [mm]: 165
• Weight [kg]: 5.12
• Installation Information: Important: Observe Fitting Instructions
• Tootja: A.B.S.

• Installatsiooni pool: Esisild
• Kõrgus (mm): 28
• Piduriketta liik: õhutusega
• Pidurikettajämedus [mm]: 28
• Välisläbimõõt [mm]: 300
• Ava Ø (mm): 64
• Tootja: DELLO AUTOMEGA
• Kogus pakendis: 2
• Lisainfo: 120007610 DELLO

• Kogus pakendis: 2
• Installatsiooni pool: Tagasild
• Piduriketta liik: täis
• Pidurikettajämedus [mm]: 11
• Välisläbimõõt [mm]: 302
• Kõrgus (mm): 51
• Tsentri läbimõõt (mm): 63,5
• Pealispind: kaetud
• Piirangutega toode/piirangu info 2: koos kruvidega
• Miinimumjämedus (mm): 9
• Puurpilt/auguarv: 5/6
• Tootja: OPTIMAL ZAWIESZENIE

• Installatsiooni pool: Tagasild
• Outer Diameter [mm]: 302
• Brake Disc Thickness [mm]: 11
• Brake Disc Type: solid
• Minimum thickness [mm]: 9
• Height [mm]: 50.8
• Bolt Hole Circle Ø [mm]: 108
• Centering Diameter [mm]: 63.6
• Wheel Bolt Bore Diameter [mm]: 16
• Supplementary Article/Info 2: without wheel hub, without wheel studs
• Surface: Painted
• Number of Holes: 5
• Nimetus: PIDURIKETAS
• Tootja: QUARO

• Installatsiooni pool: Tagasild
• Kogus pakendis: 2
• Piduriketta liik: täis
• Pidurikettajämedus [mm]: 11
• Aukude arv: 5
• Kõrgus (mm): 51
• Tsentri läbimõõt (mm): 64
• Välisläbimõõt [mm]: 302
• Pealispind: kaetud
• Miinimumjämedus (mm): 9
• Väändejõud [Nm]: 140
• Tootja: BREMBO
• Nimetus: BR 08.A540.11

• Installatsiooni pool: Esisild
• Kogus pakendis: 2
• Outer Diameter [mm]: 300
• Brake Disc Thickness [mm]: 28
• Brake Disc Type: Vented
• Number of Holes: 5
• Bolt Hole Circle Ø [mm]: 108
• Height [mm]: 52
• Centering Diameter [mm]: 63.5
• Test Mark: ECE R90
• Replace in pairs only:
• Required quantity: 2
• Tootja: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Installatsiooni pool: Tagasild
• Kogus pakendis: 2
• Kõrgus (mm): 50,8
• Piduriketta liik: täis
• Pidurikettajämedus [mm]: 11
• Miinimumjämedus (mm): 9
• Aukude arv: 1, 5
• Välisläbimõõt [mm]: 302
• Tsentri läbimõõt (mm): 63,5
• Ava Ø (mm): 108
• Pealispind: kaetud
• Tootja: SKF
• Nimetus: SK VKBD90132S2

• Installatsiooni pool: Esisild
• Minimum thickness [mm]: 26
• Brake Disc Type: Vented
• Bore Diameter [mm]: 15.8
• Brake Disc Thickness [mm]: 28
• Bolt Hole Circle Ø [mm]: 108
• Number of Holes: 5
• Inner Diameter [mm]: 140
• Height [mm]: 52
• Centering Diameter [mm]: 63.5
• Outer Diameter [mm]: 300
• Tootja: DENCKERMANN ZAWIESZENIE
• Kogus pakendis: 2

• Pidurikettajämedus [mm]: 28
• Veljeaukude hulk: 5
• Kinnitusaukude hulk: 1
• Jämedus/Tugevus (mm): 52
• Välisläbimõõt [mm]: 300
• Ava Ø (mm): 108
• Pealispind: kaetud
• Piduriketta liik: sisemine õhutus
• Installatsiooni pool: Esisild
• Miinimumjämedus (mm): 26
• Tsentri läbimõõt (mm): 63,5
• Kaal (kg): 9,01
• Hooldusinfot jälgida:
• Tootja: FEBI BILSTEIN
• Kogus pakendis: 2

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: Esisild
• Kogus pakendis: 2
• Piduriketta liik: õhutusega
• Aukude arv: 5
• Kontrolltähistus: E4 90R-02C0703/2624
• Pealispind: kaetud
• Välisläbimõõt [mm]: 300
• Pidurikettajämedus [mm]: 28
• Miinimumjämedus (mm): 26
• Tsentri läbimõõt (mm): 63,5
• Kõrgus (mm): 52
• Tootja: DELPHI LOCKHEED HAMULCE
• Nimetus: DE BG4094C
• Kvaliteediklass: PJ

• Pidurikettajämedus [mm]: 28
• Veljeaukude hulk: 5
• Kinnitusaukude hulk: 1
• Jämedus/Tugevus (mm): 52
• Välisläbimõõt [mm]: 300
• Ava Ø (mm): 108
• Pealispind: kaetud
• Piduriketta liik: sisemine õhutus
• Installatsiooni pool: Esisild
• Miinimumjämedus (mm): 26
• Tsentri läbimõõt (mm): 63,5
• Kaal (kg): 9,01
• Hooldusinfot jälgida:
• Tootja: BLUEPRINT
• Kogus pakendis: 2

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Bolt Hole Circle Ø [mm]: 63.5
• Height [mm]: 52
• Outer Diameter [mm]: 300
• Brake Disc Thickness [mm]: 28
• Minimum thickness [mm]: 26
• Number of bores: 5
• Brake Disc Type: Vented
• Test Mark: ECE R90 APPROVED
• Surface: Painted
• Tightening Torque [Nm]: 170
• Tootja: ASHIKA

• Kogus pakendis: 2
• Installatsiooni pool: Esisild
• Piduriketta liik: õhutusega
• Pidurikettajämedus [mm]: 28
• Välisläbimõõt [mm]: 300
• Kõrgus (mm): 52
• Töötlus: hochgekohlt
• Tsentri läbimõõt (mm): 63,4
• Pealispind: kaetud
• Piirangutega toode/piirangu info 2: koos kruvidega
• Miinimumjämedus (mm): 26
• Puurpilt/auguarv: 5/6
• Tootja: OPTIMAL ZAWIESZENIE

• Installatsiooni pool: Tagasild
• Kogus pakendis: 2
• Piduriketta liik: täis
• Välisläbimõõt [mm]: 302
• Pidurikettajämedus [mm]: 11
• Kõrgus (mm): 50,8
• Miinimumjämedus (mm): 9
• Pealispind: kaetud
• Siseläbimõõt [mm]: 177,6
• Ava Ø (mm): 108
• Tsentri läbimõõt (mm): 63,6
• Puurpilt/auguarv: 05/06
• Rattapoldi ava läbimõõt [mm]: 15,8
• pakendi pikkus [cm]: 32,8
• pakendi laius [cm]: 32,8
• pakendi kõrgus [cm]: 12,5
• Kaal (kg): 5,2
• Nimetus: PIDURIKETAS
• Tootja: TEX

Piirangutega toode/piirangu info 2: ilma rattakeskmeta, ilma rattalaagrita, ilma rattakinnituspoltideta

• Tootmise kuupäev alates: 10.10.2008
• Fitting Position: Front Axle
• Brake Disc Type: Vented
• Brake Disc Thickness [mm]: 28
• Outer Diameter [mm]: 300
• Height [mm]: 52
• Number of Holes: 5
• Centering Diameter [mm]: 63.5
• Bolt Hole Circle Ø [mm]: 108
• Surface: Painted
• Weight [kg]: 18
• Minimum thickness [mm]: 26
• Tootja: TOMEX BRAKES

• Installatsiooni pool: Esisild
• Tootmise kuupäev alates: 2008-10-10
• Outer Diameter [mm]: 300
• Brake Disc Thickness [mm]: 28
• Brake Disc Type: internally vented
• Minimum thickness [mm]: 26
• Height [mm]: 52.1
• Bolt Hole Circle Ø [mm]: 108
• Centering Diameter [mm]: 63.6
• Wheel Bolt Bore Diameter [mm]: 16
• Supplementary Article/Info 2: without wheel hub, without wheel studs
• Surface: Painted
• Number of Holes: 5
• Nimetus: PIDURIKETAS
• Tootja: QUARO

• Installatsiooni pool: Tagasild
• Kogus pakendis: 2
• Height [mm]: 51
• Weight [kg]: 10.4
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 11
• Minimum thickness [mm]: 9
• Outer Diameter [mm]: 302
• Number of Holes: 5
• Centering Diameter [mm]: 63.4
• Tightening Torque [Nm]: 140
• Bolt Hole Circle Ø [mm]: 108
• Surface: Coated
• Packing Type: Box
• Quantity Unit: Set
• Supplementary Article/Info 2: without bolts/screws
• Version: JC
• Packaging length [cm]: 33
• Packaging width [cm]: 33
• Packaging height [cm]: 13
• Tootja: JURID

• Pidurikettajämedus [mm]: 28
• Veljeaukude hulk: 5
• Kinnitusaukude hulk: 1
• Jämedus/Tugevus (mm): 52
• Välisläbimõõt [mm]: 300
• Ava Ø (mm): 108
• Pealispind: kaetud
• Piduriketta liik: sisemine õhutus
• Installatsiooni pool: Esisild
• Miinimumjämedus (mm): 26
• Tsentri läbimõõt (mm): 63,5
• Kaal (kg): 9,01
• Nimetus: SW 50 92 8361
• Tootja: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Ehitusaasta kuni: 12.2014
• Installatsiooni pool: Esisild
• Välisläbimõõt [mm]: 300
• Pidurikettajämedus [mm]: 28
• Miinimumjämedus (mm): 26
• Kõrgus (mm): 52,2
• Ava Ø (mm): 108
• Piduriketta liik: õhutusega
• Tsentri läbimõõt (mm): 63,6
• Aukude arv: 5
• Pealispind: kaetud
• täidab ECE-normi: ECE-R90
• Ava läbimõõt kuni [mm]: 15,8
• Nimetus: Piduriketas
• Tootja: BOS

• Installatsiooni pool: Esisild
• Pidurisuurus: 16"
• Outer Diameter [mm]: 300
• Brake Disc Thickness [mm]: 28
• Height [mm]: 52
• Rim Hole Number: 5
• Brake Disc Type: Vented
• Bolt Hole Circle Ø [mm]: 108
• Surface: Coated
• Hub Diameter [mm]: 150
• Weight [kg]: 8.7
• Installation Information: Important: Observe Fitting Instructions
• Tootja: A.B.S.

• Installatsiooni pool: Esisild
• Piduriketta liik: õhutusega
• Välisläbimõõt [mm]: 300
• Pidurikettajämedus [mm]: 28
• Miinimumjämedus (mm): 26
• Kõrgus (mm): 52
• Aukude arv: 5
• Tsentri läbimõõt (mm): 63,5
• Ava Ø (mm): 108
• Keermemõõt: 15,75
• Töötlus: hochgekohlt
• Värv: must
• Pealispind: värvitud
• Kontrolltähistus: E190R-02C0176/0492
• Nimetus: PIDURIKETAS
• Tootja: TRW
• Kogus pakendis: 2
• Kvaliteediklass: Q

• Installatsiooni pool: Esisild
• tootmise kuupäev kuni: 2008-10-10
• Outer Diameter [mm]: 316
• Brake Disc Thickness [mm]: 28
• Brake Disc Type: Externally Vented
• Minimum thickness [mm]: 26
• Height [mm]: 52
• Bolt Hole Circle Ø [mm]: 108
• Centering Diameter [mm]: 63.5
• Supplementary Article/Info 2: without wheel hub, without wheel studs
• Surface: Painted
• Number of Holes: 5
• Nimetus: Piduriketas
• Tootja: QUARO
• Lisainfo: QD6049

• Installatsiooni pool: Esisild
• Kogus pakendis: 2
• Piduriketta liik: sisemine õhutus
• Pidurikettajämedus [mm]: 28
• Aukude arv: 5
• Kõrgus (mm): 52
• Tsentri läbimõõt (mm): 64
• Välisläbimõõt [mm]: 300
• Pealispind: kaetud
• Miinimumjämedus (mm): 26
• Väändejõud [Nm]: 170
• Tootja: BREMBO
• Nimetus: BR 09.A427.11
• Kvaliteediklass: Q

• Installatsiooni pool: Tagasild
• Piduriketta liik: täis
• Välisläbimõõt [mm]: 302
• Pidurikettajämedus [mm]: 11
• Kõrgus (mm): 50,8
• Miinimumjämedus (mm): 9
• Pealispind: kaetud
• Siseläbimõõt [mm]: 177,6
• Ava Ø (mm): 108
• Tsentri läbimõõt (mm): 63,6
• Puurpilt/auguarv: 05/06
• Rattapoldi ava läbimõõt [mm]: 15,8
• Kaal (kg): 5,2
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Nimetus: HE 8DD355118841
• Tootja: HELLA PAGID

Piirangutega toode/piirangu info 2: ilma rattakeskmeta, ilma rattalaagrita, ilma rattakinnituspoltideta

• Rim Hole Number: 5
• Fitting Position: Front Axle
• Height [mm]: 52
• Brake Disc Type: Vented
• Brake Disc Thickness [mm]: 28
• Minimum thickness [mm]: 26
• Outer Diameter [mm]: 300
• Number of Holes: 1
• Centering Diameter [mm]: 63.5
• Tootja: DRIVE

• Installatsiooni pool: Tagasild
• Kogus pakendis: 2
• Outer Diameter [mm]: 302
• Brake Disc Thickness [mm]: 10.9
• Minimum thickness [mm]: 9
• Brake Disc Type: solid
• Surface: Coated
• Number of Holes: 5
• Bolt Hole Circle Ø [mm]: 108
• Height [mm]: 50.8
• Centering Diameter [mm]: 63.5
• Inner Diameter [mm]: 177.6
• Bore Diameter [mm]: 15.8
• Supplementary Article/Info 2: with bolts/screws
• MAPP code available:
• Test Mark: E1 90R-02C0165/0953
• Nimetus: PIDURIKETAS
• Tootja: ATE
• Kvaliteediklass: Q

• Fitting Position: Front Axle
• Brake Disc Type: Vented
• Brake Disc Thickness [mm]: 28
• Outer Diameter [mm]: 300
• Weight [kg]: 8.328
• Height [mm]: 52
• Number of Holes: 5
• Bolt Hole Circle Ø [mm]: 108
• Centering Diameter [mm]: 64
• Surface: Coated
• Minimum thickness [mm]: 25
• Bore Diameter up to [mm]: 16
• Nimetus: ALT 127956FCAL
• Tootja: ALTE AUTOMOTIVE

• Installatsiooni pool: Tagasild
• Kogus pakendis: 2
• Piduriketta liik: täis, perforeeritud
• Pidurikettajämedus [mm]: 11
• Aukude arv: 5
• Kõrgus (mm): 51
• Tsentri läbimõõt (mm): 64
• Välisläbimõõt [mm]: 302
• Pealispind: kaetud
• Miinimumjämedus (mm): 9,5
• Väändejõud [Nm]: 140
• Tehniline informatsioon: ECE R 90 Homologation.
• Tootja: BREMBO
• Nimetus: BR 08.A540.1X
• Kvaliteediklass: Q

Üldine informatsioon: The specific drilling of Brembo Xtra brake discs provides a brilliant and efficient performance in any braking condition, to emphasise the driving style of true enthusiasts.

• Installatsiooni pool: Esisild
• Tootmise kuupäev alates: 2008-10-10
• Outer Diameter [mm]: 300
• Brake Disc Thickness [mm]: 28
• Brake Disc Type: internally vented
• Minimum thickness [mm]: 26
• Height [mm]: 52.1
• Bolt Hole Circle Ø [mm]: 108
• Centering Diameter [mm]: 63.6
• Wheel Bolt Bore Diameter [mm]: 16
• Supplementary Article/Info 2: without wheel hub, without wheel studs
• Surface: Painted
• Machining: High-carbon
• Number of Holes: 5
• Nimetus: Piduriketas
• Tootja: QUARO

• Installatsiooni pool: Esisild
• Piduriketta liik: välisõhutus
• Välisläbimõõt [mm]: 316
• Pidurikettajämedus [mm]: 28
• Kõrgus (mm): 52
• Miinimumjämedus (mm): 26
• Töötlus: hochgekohlt
• Pealispind: kaetud
• Siseläbimõõt [mm]: 144
• Ava Ø (mm): 108
• Tsentri läbimõõt (mm): 63,5
• Puurpilt/auguarv: 05/06
• Rattapoldi ava läbimõõt [mm]: 15,7
• pakendi pikkus [cm]: 32,8
• pakendi laius [cm]: 32,8
• pakendi kõrgus [cm]: 7,5
• Kaal (kg): 10,2
• Nimetus: Piduriketas
• Tootja: TEX
• Kogus pakendis: 2

Piirangutega toode/piirangu info 2: ilma rattakeskmeta, ilma rattalaagrita, ilma rattakinnituspoltideta

• Installatsiooni pool: Tagasild
• Kogus pakendis: 2
• Outer Diameter [mm]: 302
• Brake Disc Thickness [mm]: 10.9
• Minimum thickness [mm]: 9
• Brake Disc Type: solid
• Surface: Coated
• Number of Holes: 5
• Bolt Hole Circle Ø [mm]: 108
• Height [mm]: 50.8
• Centering Diameter [mm]: 63.5
• Inner Diameter [mm]: 177.6
• Bore Diameter [mm]: 15.8
• Test Mark: E1 90R-02C0859/1292
• MAPP code available:
• Nimetus: PIDURIKETAS
• Tootja: ATE

General Information: Sure Thing, ATE! The PowerDisc shows what it can do. Looks better - wears less The brake disc with a profile pays off: The cleaning effect of the continuous groove ensures more even wear of the brake disc and a marked reduction in the scoring that can occur on both brake disc and brake pads. Score-free wear even in heavy-duty use extends the life of the brake discs - and also offers better looks, particularly for wheel rims of today's modern and open style. The multipurpose groove permits visual detection of wear at a glance, without awkward, time-consuming and expensive removal or special measuring tools. If the entire groove has been worn away, the brake disc has reached its thickness limit and must be replaced. The high temperatures generated during braking result in gases between the brake disc and brake pad. These gases c onsiderably impair the braking effect (fading). The PowerDisc channels off the gases via the multifunctional groove and in so doing ensures dependable braking. This brake disc has been thought out down to the last detail : Conventional brake discs have to be cleaned before assembly in an often very expensive and time consuming process using environmentally harmful agents. Poor cleaning often causes permanent impairment of the friction between the brake pads and the brake disc. The new corrosion protection on the ATE PowerDisc, however, no longer has to be removed before assembly and so remains on the brake disc. Protected and sealed in this way, the ATE PowerDisc is less prone to rust, shortens the installation time, and helps protect the enviro nment. Many benefits - thanks to corrosion protection The ATE PowerDisc is certified for general use in Germany (ABE) - i.e. no entry in the vehicle documents is needed. That saves you time and money. Braking like the professionals The complete range Greater safety and longer life make the ATE PowerDisc a disc that could well be a big success, which you can have installed by your garage right away. And if you have any other questions to do with brakes and the ATE product range, your friendly brake expert there will only be too glad to help you. Our ATE PowerDisc has already been proven in many long-distance racing events and touring car championships. And with its outstanding braking characteristics on both dry and wet surfaces, it's the ideal choice for the New Beetle and Lupo Cups, and in the Formula König and Formula 3. Everything's in favour of the ATE PowerDisc: Water and dirt can considerably reduce the effectiveness of the brake pads. Our answer is: the innovative ATE PowerDisc, the only brake disc with a continuous multipurpose groove, which channels off water, dirt and the gases generated between the brake disc and the brake pads by high temperatures during braking, rather like the tread of a tyre does. This considerably increases your safety, reduces scoring, and extends the life of the brake disc. And besides braking so well, it looks better for a longer pe riod. The ATE PowerDisc with multipurpose groove has clear advantages: - general certification (ABE) - better response in wet conditions - shorter running-in period for the newly fitted pad and dis c - better appearance - wear detection - improved corrosion protection Technical Information: For vehicles without ABS, a PowerDisc can be used on the rea r axle only if there is one on the front axle. The General Operating Permit (ABE) for the PowerDisc applies to operation on German roads in accordance with the German Road Traffic Registration Ordinance (StVZO). Other countries may require additional type approvals for use on roads.

• Installatsiooni pool: Esisild
• Outer Diameter [mm]: 300
• Brake Disc Thickness [mm]: 28
• Minimum thickness [mm]: 26
• Brake Disc Type: Vented
• Machining: High-carbon
• Surface: Coated
• Number of Holes: 5
• Bore Diameter [mm]: 15.8
• Bolt Hole Circle Ø [mm]: 108
• Height [mm]: 52
• Centering Diameter [mm]: 63.5
• Inner Diameter [mm]: 140
• Supplementary Article/Info 2: with bolts/screws
• MAPP code available:
• Test Mark: E1 90R-02C0115/0038
• Nimetus: PIDURIKETAS
• Tootja: ATE
• Kogus pakendis: 2
• Kvaliteediklass: Q

• Installatsiooni pool: Esisild
• Test Mark: R90 Homologated
• Height [mm]: 52
• Weight [kg]: 17.95
• Bore Diameter [mm]: 15.8
• Brake Disc Type: Vented
• Brake Disc Thickness [mm]: 28
• Minimum thickness [mm]: 26
• Hole Arrangement/Number: 5+1
• Outer Diameter [mm]: 300
• Number of Holes: 5
• Centering Diameter [mm]: 63.5
• Tightening Torque [Nm]: 170
• Bolt Hole Circle Ø [mm]: 108
• Surface: Coated
• Packing Type: Box
• Quantity Unit: Piece
• Supplementary Article/Info 2: without bolts/screws
• Bore Diameter 2 [mm]: 15.8
• Version: JC
• Packaging length [cm]: 31
• Packaging width [cm]: 30.5
• Packaging height [cm]: 8
• Tootja: JURID

• Installatsiooni pool: Esisild
• Kogus pakendis: 2
• Piduriketta liik: augustatud/sise
• Pidurikettajämedus [mm]: 28
• Aukude arv: 5
• Kõrgus (mm): 52
• Tsentri läbimõõt (mm): 64
• Välisläbimõõt [mm]: 300
• Pealispind: kaetud
• Miinimumjämedus (mm): 26,5
• Väändejõud [Nm]: 170
• Tehniline informatsioon: ECE R 90 Homologation.
• Tootja: BREMBO
• Nimetus: BR 09.A427.1X
• Kvaliteediklass: Q

Üldine informatsioon: The specific drilling of Brembo Xtra brake discs provides a brilliant and efficient performance in any braking condition, to emphasise the driving style of true enthusiasts.

• Installatsiooni pool: Esisild
• Outer Diameter [mm]: 300
• Brake Disc Thickness [mm]: 28
• Minimum thickness [mm]: 26
• Brake Disc Type: Vented
• Machining: High-carbon
• Surface: Coated
• Number of Holes: 5
• Bore Diameter [mm]: 15.8
• Bolt Hole Circle Ø [mm]: 108
• Height [mm]: 52
• Centering Diameter [mm]: 63.5
• Inner Diameter [mm]: 140
• Supplementary Article/Info 2: with bolts/screws
• MAPP code available:
• Nimetus: Piduriketas
• Tootja: ATE
• Kogus pakendis: 2

General Information: Sure Thing, ATE! The PowerDisc shows what it can do. Looks better - wears less The brake disc with a profile pays off: The cleaning effect of the continuous groove ensures more even wear of the brake disc and a marked reduction in the scoring that can occur on both brake disc and brake pads. Score-free wear even in heavy-duty use extends the life of the brake discs - and also offers better looks, particularly for wheel rims of today's modern and open style. The multipurpose groove permits visual detection of wear at a glance, without awkward, time-consuming and expensive removal or special measuring tools. If the entire groove has been worn away, the brake disc has reached its thickness limit and must be replaced. The high temperatures generated during braking result in gases between the brake disc and brake pad. These gases c onsiderably impair the braking effect (fading). The PowerDisc channels off the gases via the multifunctional groove and in so doing ensures dependable braking. This brake disc has been thought out down to the last detail : Conventional brake discs have to be cleaned before assembly in an often very expensive and time consuming process using environmentally harmful agents. Poor cleaning often causes permanent impairment of the friction between the brake pads and the brake disc. The new corrosion protection on the ATE PowerDisc, however, no longer has to be removed before assembly and so remains on the brake disc. Protected and sealed in this way, the ATE PowerDisc is less prone to rust, shortens the installation time, and helps protect the enviro nment. Many benefits - thanks to corrosion protection The ATE PowerDisc is certified for general use in Germany (ABE) - i.e. no entry in the vehicle documents is needed. That saves you time and money. Braking like the professionals The complete range Greater safety and longer life make the ATE PowerDisc a disc that could well be a big success, which you can have installed by your garage right away. And if you have any other questions to do with brakes and the ATE product range, your friendly brake expert there will only be too glad to help you. Our ATE PowerDisc has already been proven in many long-distance racing events and touring car championships. And with its outstanding braking characteristics on both dry and wet surfaces, it's the ideal choice for the New Beetle and Lupo Cups, and in the Formula König and Formula 3. Everything's in favour of the ATE PowerDisc: Water and dirt can considerably reduce the effectiveness of the brake pads. Our answer is: the innovative ATE PowerDisc, the only brake disc with a continuous multipurpose groove, which channels off water, dirt and the gases generated between the brake disc and the brake pads by high temperatures during braking, rather like the tread of a tyre does. This considerably increases your safety, reduces scoring, and extends the life of the brake disc. And besides braking so well, it looks better for a longer pe riod. The ATE PowerDisc with multipurpose groove has clear advantages: - general certification (ABE) - better response in wet conditions - shorter running-in period for the newly fitted pad and dis c - better appearance - wear detection - improved corrosion protection Technical Information: For vehicles without ABS, a PowerDisc can be used on the rea r axle only if there is one on the front axle. The General Operating Permit (ABE) for the PowerDisc applies to operation on German roads in accordance with the German Road Traffic Registration Ordinance (StVZO). Other countries may require additional type approvals for use on roads.