• Pistikkontaktide arv: 2
• Värv: sinine
• Tootja: JP GROUP
• Lisainfo: Temperature sensor for cooling system, 2 pins

• Pistikkontaktide arv: 1
• Keermemõõt: M10x1 mm
• Võtmekaugus: 13 mm
• OE-numbri jaoks: 049919563B
• Tootja: KAMOKA
• Lisainfo: 4080049 KAMOKA

• Värv: must
• Piirangutega toode/piirangu info: koos tihendiga
• Tootja: JP GROUP
• Lisainfo: Sender for oil temperature

• Korpusevärv: valge
• Võtmekaugus: 19
• OE-numbri jaoks: 26906161
• Tootja: KAMOKA

• Korpusevärv: sinine
• OE-numbri jaoks: 025906041A
• Tootja: KAMOKA

• Ehitusaasta kuni: 07.1988
• Tootja: AIC
• Lisainfo: 51913 AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Värv: sinine
• Pistikkontaktide arv: 2
• Nimetus: ANDUR,JAHUTUSVEDELIKU TEMP.
• Tootja: MAX

• Värv: valge
• Pistikkontaktide arv: 2
• Keermemõõt: M10 x 1
• Nimetus: ANDUR,JAHUTUSVEDELIKU TEMP.
• Tootja: MAX

• Pikkus (mm): 25
• Temperatuurivahemik kuni [°C]: 125
• Väliskeerme mõõde: M10 x 1
• Keermepikkus (mm): 10,9
• Võtmekaugus: 14
• Ühenduste arv: 1
• Värvimarkeering: must
• Kaal (kg): 0,012
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Tootja: FEBI

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pistikkontaktide arv: 2
• Värv: valge
• Väliskeere [mm]: M10x1
• Tootja: JP GROUP
• Lisainfo: Temperature sensor for cooling system, 2 pins

• Kasutuspinge [V]: 12
• Anduritüüp: passiivne andur
• Lüliti funktsioon: Reed-lüliti
• Piirangutega toode/piirangu info 2: ilma kaablita
• Pistikkontaktide arv: 2
• Tootja: JP GROUP
• Lisainfo: Distance sensor

• Käigukasti liik: Käigukast 4 käiku, Käigukast 5 käiku
• Pistikkontaktide arv: 2
• Kaal (kg): 0,05
• Garantii: 3 aastat garantii
• Nimetus: CE 17SKV555
• Tootja: ESEN SKV

• Ehitusaasta alates: 10.1986
• Keermemõõt: M10x1.0
• Tootja: VERNET

• Ühenduskeere: M10 x 1
• Tootja: ERA

Tootja: ERA

• Mootorikood: SD
• Pistikkontaktide arv: 1
• Värv: must
• Keermemõõt: M10x1
• Võtmekaugus: 13
• Nimetus: ANDUR,JAHUTUSVEDELIKU TEMP.
• Tootja: EPS

• Anduritüüp: NTC-andur
• Keermemõõt: M10 x 1
• Võtmekaugus: 13
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Värv: must
• Pistikkontaktide arv: 1
• Nimetus: ANDUR,JAHUTUSVEDELIKU TEMP.
• Tootja: MEY

• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Pistikkontaktide arv: 2
• Tootja: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Mootorikood: SD
• Pistikkontaktide arv: 1
• Värv: sinine
• Keermemõõt: M10x1
• Võtmekaugus: 13
• Vastab originaalosa värvile: sinine
• Nimetus: ANDUR,OLITEMPERATUUR
• Tootja: EPS

• Temperatuurivahemik kuni [°C]: 125
• Väliskeere [mm]: M10 x 1
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Tootja: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Pistikkontaktide arv: 2
• Värv: must
• Materjal: Plastik
• Tootja: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Ehitusaasta kuni: 07.1988
• Pistikkontaktide arv: 2
• Pistikukatte kuju: ristkülik
• Pistiku värv: valge
• Väliskeere [mm]: M 10x1
• Võtmekaugus: 19 mm
• OE-numbri jaoks: 026 906 161
• Tootja: MEAT&DORIA

• Värv: must
• Pistikkontaktide arv: 1
• Kaal (kg): 0,3
• pakendi pikkus [cm]: 12
• pakendi laius [cm]: 8
• pakendi kõrgus [cm]: 6

• Keermemõõt: M10x1.0
• Tootja: VERNET

• Pistikkontaktide arv: 3
• Pistiku värv: sinine
• Seerianumber: ESS-AU-001
• Tootja: NTY

• Ühenduste arv: 2
• Värv: sinine
• Kaal (kg): 0,015
• Piirangutega toode/piirangu info: koos tihendiga, hoidevedruga
• Tootja: SWAG
• Nimetus: SW 30 93 4762

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Kerenumber (VIN) alates: 89-H-300 001
• Sõidukivarustus: Kliimaautomaatikaga sõidukile
• Anduritüüp: NTC-andur
• Värv: sinine
• Pistikkontaktide arv: 2
• Nimetus: ANDUR,JAHUTUSVEDELIKU TEMP.
• Tootja: MEY

Tootja: FAE

• Hulk: 1
• Installatsiooni pool: Esisild
• Üldine informatsioon: distance sensor
• Tootja: VIKA

• Pikkus (mm): 37
• Kaal (kg): 0,02
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• OE-numbri jaoks: 025 906 041 A
• Piirangutega toode/piirangu info: koos tihendiga
• Värvimarkeering: sinine
• Pistikkontaktide arv: 2
• Tootja: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Keermemõõt: M20
• Pistikkontaktide arv: 2
• Pistikukatte kuju: ristkülik
• Tootja: ERA

• Väliskeerme mõõde: M10 x 1
• Ühenduste arv: 1
• Kaal (kg): 0,01
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Tootja: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Korpusevärv: valge
• Pistikkontaktide arv: 2
• Keermemõõt: M10X1-6g
• Võtmekaugus: 19
• Tootja: DELPHI
• Nimetus: DE TS10251

• Ehitusaasta kuni: 07.1988
• Kaablipikkus (mm): 520
• Pistikkontaktide arv: 3
• Värv: sinine, must
• Tootja: DELLO AUTOMEGA

• Väliskeerme mõõde: M10 x 1
• Ühenduste arv: 1
• Kaal (kg): 0,01
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Nimetus: SW 30 93 3825
• Tootja: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Kerenumber (VIN) alates: 89-H-300 001
• Anduritüüp: NTC-andur
• Keermemõõt: M10 x 1
• Võtmekaugus: 19
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Värv: valge
• Pistikkontaktide arv: 2
• Nimetus: ANDUR,JAHUTUSVEDELIKU TEMP.
• Tootja: MEY

• Ehitusaasta alates: 07.1987
• Mootorikood: SD
• Pistikkontaktide arv: 3
• Pistikukatte kuju: ristkülik
• Kaablipikkus (mm): 800
• Tootja: MEAT&DORIA

• Väliskeerme mõõde: M10 x 1
• Ühenduste arv: 2
• Värv: valge
• Kaal (kg): 0,025
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Tootja: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pistikkontaktide arv: 3
• Pistikukatte kuju: ristkülik
• Kaablipikkus (mm): 550
• OE-numbri jaoks: 054 905 377 G, 480EE-1002060
• Tootja: MEAT&DORIA

• Läbimõõt [mm]: 90
• Pikkus (mm): 835
• Kõrgus (mm): 37
• Üldine informatsioon: knock sensor
• Tootja: VIKA

• Kaablipikkus (mm): 520
• Pistikkontaktide arv: 3
• Kaal (kg): 0,08
• Tootja: ERA

• Pistiku kesta tüüp: Pistikuhülsi korpus
• Tootja piirang: Alfa Romeo, Fiat, VAG
• Pistikkontaktide arv: 2
• Kaablipikkus (mm): 250
• Kaabli ristlõige [mm²]: 1
• Piirangutega toode/piirangu info: Pistikuhülsi korpusega, koos tihenditega
• Piirangutega toode/piirangu info 2: koos ühendusega
• temperatuurivahemik alates [°C]: −25
• Temperatuurivahemik kuni [°C]: +140
• juhtmeisolatsiooni materjal: Silikoon
• SVHC: SVHS aineid ei esine
• Tootja: HBE

Nimetus: Kaabli remondikomplekt, jahutusvedeliku temperatuuri andur

• Kaablipikkus (mm): 535
• Pistikkontaktide arv: 3
• Korpusevärv: sinine
• Lisainfo: Knock sensor

• Pistikkontaktide arv: 3
• Värv: must
• Tootja: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Pistiku kesta tüüp: Pistikuhülsi korpus
• Tootja piirang: BMW, Volvo, VAG
• Pistikkontaktide arv: 3
• Kaablipikkus (mm): 250
• Kaabli ristlõige [mm²]: 1
• Piirangutega toode/piirangu info: Pistikuhülsi korpusega, koos tihenditega
• Piirangutega toode/piirangu info 2: koos ühendusega
• temperatuurivahemik alates [°C]: −25
• Temperatuurivahemik kuni [°C]: +140
• juhtmeisolatsiooni materjal: Silikoon
• SVHC: SVHS aineid ei esine
• Tootja: HBE

Nimetus: Kaabliparanduskomplekt, seadeelement- tulede ulatuse regul

• Kerenumber (VIN) alates: 89-H-300 001
• Käigukasti liik: Käigukast 4 käiku, Käigukast 5 käiku
• Pistikkontaktide arv: 2
• Kaal (kg): 0,02
• Tootja: VEMO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

Tootja: MAGNETI MARELLI

• Ülekandeliinide arv: 3
• Lambda andur: Sond
• Tootja: KAMOKA

• Ülekandeliinide arv: 3
• pikkus üle kõige (mm): 989
• Lambda andur: soojendatud
• Lisainfo: Lambda sensor

• Pistikkontaktide arv: 2
• Installatsiooni pool: väljas
• Tootja: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Ehitusaasta kuni: 07.1988
• Tootja: BOSCH

• Sõidukivarustus: Kliimaautomaatikaga sõidukile
• Installatsiooni pool: väljas
• Piirangutega toode/piirangu info 2: koos kaabliga
• Pistikkontaktide arv: 2
• Tootja: METZGER

• Ehitusaasta kuni: 07.1988
• Nimetus: DETONATSIOONIANDUR
• Tootja: BOS

• Lambda andur: Bistabiilne andur
• Pinge [V]: 12
• Ülekandeliinide arv: 3
• Kaal (kg): 0,08
• Rakendustüüp: elektriline
• Garantii: 3 aastat garantii
• Nimetus: CE 09SKV903
• Tootja: ESEN SKV

• Ehitusaasta kuni: 07.1988
• Lambda andur: Sond, soojendatud
• Installatsiooni pool: katalüsaatori ees
• Ülekandeliinide arv: 3
• pikkus üle kõige (mm): 1 270
• Nimetus: LAMBDA ANDUR
• Tootja: MAX

• Tootja: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Pikkus (mm): 1 215
• Ülekandeliinide arv: 3
• Ühendushulk: 3
• Takistus [oom]: 4,5
• Kaablipikkus (mm): 1 215
• Lambda andur: soojendatud
• Tootja: MAGNETI MARELLI

• Kaabliisolatsiooni tüüp: silikoonitud kiudoptilise võrgu isolatsiooniga
• Pistikukatte kuju: ristkülik
• Pistiku värv: must
• OE-numbri jaoks: 025 906 265 B
• Kaal (kg): 0,186
• Keermemõõt: M18 x 1,5
• Pikkus (mm): 1 130
• Pistikkontaktide arv: 3
• Lambda andur: Sond, Keere eelmääritud
• Ülekandeliinide arv: 3
• Väljalaskesüsteem: katalüsaatori ees
• Tootja: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda andur: Bistabiilne andur
• Kaablipikkus (mm): 1 250
• Ülekandeliinide arv: 3
• Tootja: ERA

• Ülekandeliinide arv: 3
• pikkus üle kõige (mm): 1 236
• Lambda andur: soojendatud
• Lisainfo: Lambda sensor

• Ehitusaasta kuni: 07.1988
• Lambda andur: Sond
• Pinge [V]: 12
• Pikkus (mm): 1 670
• Ülekandeliinide arv: 3
• Kaal (kg): 0,23
• Takistus [oom]: 4,5
• Rakendustüüp: elektriline
• Garantii: 3 aastat garantii
• Tootja: SKV GERMANY
• Nimetus: CE 09SKV546

• Lambda andur: Sond
• Ehitusaasta kuni: 07.1988
• Pinge [V]: 12
• Pikkus (mm): 1 215
• Ülekandeliinide arv: 3
• Kaal (kg): 0,13
• Rakendustüüp: elektriline
• Garantii: 3 aastat garantii
• Nimetus: CE 09SKV066
• Tootja: ESEN SKV

• Ehitusaasta kuni: 07.1988
• Käigukasti liik: Käigukast
• Lambda andur: Sond, soojendatud, Sõrmesensor, Bistabiilne andur
• Väljalaskesüsteem: eelkatalüsaatori jaoks
• OE-numbri jaoks: UNIVERSAL fit
• Kvaliteet: OE
• Keermemõõt: M18x1.5
• Kaablipikkus (mm): 750
• Pistikkontaktide arv: 3
• Kaal (g): 95
• Tootja: DENSO
• Nimetus: Lambda sensor
• Kvaliteediklass: Q

Lisainfo: "Tootja: DENSO
ESCORT IV KOMBI (AWF
(kvaliteediklass: Q)"

• Ehitusaasta kuni: 07.1988
• Lambda andur: Sond
• Installatsiooni pool: katalüsaatori ees
• Ülekandeliinide arv: 3
• Soovituslik vahetusintervall (km): 160 000
• Ühendus/klemm: vajadusel kohandada pistikühendus
• Nimetus: LAMBDA ANDUR
• Tootja: BOS

• Ehitusaasta kuni: 07.1988
• Lambda andur: Sond
• Installatsiooni pool: katalüsaatori ees
• Ülekandeliinide arv: 3
• pikkus üle kõige (mm): 1 236
• ka universaaltootena saadav vaata toode-nr.: 0258986502
• Soovituslik vahetusintervall (km): 100 000
• Nimetus: LAMBDA ANDUR
• Tootja: BOS

• Kaal (kg): 0,059
• Tootja: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.