• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Outer Diameter [mm]: 245
• Brake Disc Thickness [mm]: 10
• Number of Holes: 5
• Surface: Coated
• Tootja: JP GROUP
• Lisainfo: Brake Disc

• Fitting Position: Front Axle
• Brake Disc Type: Vented
• Outer Diameter [mm]: 288
• Brake Disc Thickness [mm]: 25
• Number of Holes: 5
• Surface: Coated
• Lisainfo: Brake Disc

• Installatsiooni pool: Tagasild
• Ehitusaasta alates: 08.1992
• Piduriketta liik: täis
• Kõrgus (mm): 63,9
• Pidurikettajämedus [mm]: 10
• Välisläbimõõt [mm]: 245
• Aukude arv: 5
• Tsentri läbimõõt (mm): 68
• Tootja: JPN

• Ehitusaasta alates: 04.1992
• Installatsiooni pool: Tagasild
• Brake Disc Thickness [mm]: 10
• Rim Hole Number: 5
• Brake Disc Type: solid
• Outer Diameter [mm]: 245
• Bolt Hole Circle Ø [mm]: 112
• Tootja: DELLO AUTOMEGA
• Kogus pakendis: 2
• Lisainfo: 120017610 DELLO

• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Outer Diameter [mm]: 245
• Hub Diameter [mm]: 145.5
• Centering Diameter [mm]: 68
• Brake Disc Thickness [mm]: 10
• Height [mm]: 64
• Rim Hole Number: 5
• Bolt Hole Circle Ø [mm]: 112
• Replace in pairs only:
• Tootja: TOPRAN HANS PRIES
• Kogus pakendis: 2

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Ehitusaasta alates: 04.1992
• Ehitusaasta kuni: 06.1994
• Installatsiooni pool: Tagasild
• Piduri-/sõidudünaamika: Sõidukitele koos ABS-ga
• Kogus pakendis: 2
• Number of Holes: 5
• Centering Diameter [mm]: 68
• Height [mm]: 64
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 10
• Minimum thickness [mm]: 8
• Outer Diameter [mm]: 245
• Tootja: LPR
• Nimetus: LPR A1401P

• Installatsiooni pool: Tagasild
• Ehitusaasta alates: 04.1992
• Miinimumjämedus (mm): 8
• Piduriketta liik: täis
• Ava läbimõõt [mm]: 15,4
• Pidurikettajämedus [mm]: 10
• Ava Ø (mm): 112
• Aukude arv: 5
• Siseläbimõõt [mm]: 135,5
• Kõrgus (mm): 64,2
• Tsentri läbimõõt (mm): 68
• Välisläbimõõt [mm]: 245
• Tootja: DENCKERMANN ZAWIESZENIE

• Brake Disc Thickness [mm]: 10
• Rim Hole Number: 5
• Thickness [mm]: 64
• Outer Diameter [mm]: 244
• Bolt Hole Circle Ø [mm]: 112
• Surface: Coated
• Brake Disc Type: solid
• Fitting Position: Rear Axle
• Minimum thickness [mm]: 8
• Centering Diameter [mm]: 68
• Weight [kg]: 3.62
• Observe service information:
• Tootja: BLUEPRINT
• Kogus pakendis: 2

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: Tagasild
• Piduri-/sõidudünaamika: Sõidukitele koos ABS-ga
• Outer Diameter [mm]: 245
• Brake Disc Thickness [mm]: 10
• Height [mm]: 64
• Rim Hole Number: 5
• Brake Disc Type: solid
• Bolt Hole Circle Ø [mm]: 112
• Hub Diameter [mm]: 145
• Weight [kg]: 3.63
• Installation Information: Important: Observe Fitting Instructions
• Tootja: A.B.S.

• Installatsiooni pool: Tagasild
• Kogus pakendis: 2
• Kontrolltähistus: ECE-R90
• Kõrgus (mm): 64
• Piduriketta liik: täis
• Pidurikettajämedus [mm]: 10
• Välisläbimõõt [mm]: 245
• Aukude arv: 5
• Ava Ø (mm): 68
• Pealispind: värvitud
• Tootja: CIFAM

• Ehitusaasta alates: 04.1992
• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Surface: Coated
• Number of Holes: 5
• Bolt Hole Circle Ø [mm]: 112
• Height [mm]: 64
• Outer Diameter [mm]: 245
• Centering Diameter [mm]: 68
• Brake Disc Thickness [mm]: 10
• Tootja: KAMOKA UK£ADY HAMULCOWE
• Lisainfo: 103642 KAMOKA

• Brake Disc Thickness [mm]: 10
• Rim Hole Number: 5
• Thickness [mm]: 63.9
• Outer Diameter [mm]: 244.4
• Bolt Hole Circle Ø [mm]: 112
• Surface: Coated
• Brake Disc Type: solid
• Fitting Position: Rear Axle
• Minimum thickness [mm]: 8
• Centering Diameter [mm]: 68
• Weight [kg]: 3.62
• Observe service information:
• Tootja: FEBI BILSTEIN
• Kogus pakendis: 2

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: Tagasild
• Kogus pakendis: 2
• Brake Disc Type: solid
• Number of Holes: 5
• Test Mark: E1 90R-02C0100/1592
• Surface: Oiled
• Outer Diameter [mm]: 245
• Brake Disc Thickness [mm]: 9.9
• Minimum thickness [mm]: 8
• Centering Diameter [mm]: 68
• Height [mm]: 64
• Tootja: DELPHI LOCKHEED HAMULCE
• Nimetus: DE BG2746

• Installatsiooni pool: Tagasild
• Kogus pakendis: 2
• Test Mark: ECE-R90
• Height [mm]: 64
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 10
• Outer Diameter [mm]: 245
• Number of Holes: 5
• Bolt Hole Circle Ø [mm]: 68
• Surface: Painted
• Tootja: METELLI UKL.HAMULCOWY

• Brake Disc Thickness [mm]: 10
• Rim Hole Number: 5
• Thickness [mm]: 63.9
• Outer Diameter [mm]: 244.4
• Bolt Hole Circle Ø [mm]: 112
• Surface: Coated
• Brake Disc Type: solid
• Fitting Position: Rear Axle
• Minimum thickness [mm]: 8
• Centering Diameter [mm]: 68
• Weight [kg]: 3.62
• Nimetus: SW 32 90 9075
• Tootja: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Kogus pakendis: 2
• Installatsiooni pool: Tagasild
• Piduriketta liik: täis
• Pidurikettajämedus [mm]: 10
• Välisläbimõõt [mm]: 245
• Kõrgus (mm): 64
• Aukude arv: 5
• Tsentri läbimõõt (mm): 68
• Ava Ø (mm): 112
• Pealispind: värvitud
• Kaal (kg): 7,8
• Miinimumjämedus (mm): 8
• Tootja: TOMEX BRAKES

• Installatsiooni pool: Tagasild
• Brake Disc Type: solid
• Outer Diameter [mm]: 245
• Brake Disc Thickness [mm]: 10
• Height [mm]: 63.7
• Minimum thickness [mm]: 8
• Surface: Coated
• Inner Diameter [mm]: 136
• Bolt Hole Circle Ø [mm]: 112
• Centering Diameter [mm]: 68
• Hole Arrangement/Number: 05/05
• Wheel Bolt Bore Diameter [mm]: 15.2
• Weight [kg]: 3.6
• Assy./disassy. by qualified personnel required!:
• Nimetus: HE 8DD355102801
• Tootja: HELLA PAGID

Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs

• Installatsiooni pool: Tagasild
• Kogus pakendis: 2
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 10
• Number of Holes: 5
• Height [mm]: 64
• Centering Diameter [mm]: 68
• Outer Diameter [mm]: 245
• Surface: Coated
• Minimum thickness [mm]: 8
• Tightening Torque [Nm]: 120
• Tootja: BREMBO
• Nimetus: BR 08.5743.11
• Kvaliteediklass: Q

• Ehitusaasta alates: 04.1992
• Installatsiooni pool: Tagasild
• Kogus pakendis: 2
• Outer Diameter [mm]: 245
• Brake Disc Thickness [mm]: 10
• Minimum thickness [mm]: 8
• Brake Disc Type: solid
• Number of Holes: 5
• Surface: Coated
• Bolt Hole Circle Ø [mm]: 112
• Height [mm]: 64.2
• Centering Diameter [mm]: 68
• Inner Diameter [mm]: 135.5
• Bore Diameter [mm]: 15.4
• MAPP code available:
• Test Mark: E1 90R-02C0165/1152
• Tootja: ATE
• Kvaliteediklass: Q
• Nimetus: Brake discs

• Ehitusaasta alates: 04.1992
• Installatsiooni pool: Esisild
• Brake Disc Type: Vented
• Brake Disc Thickness [mm]: 25
• Outer Diameter [mm]: 288
• Bolt Hole Circle Ø [mm]: 112
• Tootja: DELLO AUTOMEGA
• Kogus pakendis: 2

• Installatsiooni pool: Tagasild
• Kogus pakendis: 2
• Brake Disc Type: solid
• Outer Diameter [mm]: 245
• Brake Disc Thickness [mm]: 10
• Height [mm]: 63.7
• Minimum thickness [mm]: 8
• Surface: Coated
• Inner Diameter [mm]: 136
• Bolt Hole Circle Ø [mm]: 112
• Centering Diameter [mm]: 68
• Hole Arrangement/Number: 05/05
• Wheel Bolt Bore Diameter [mm]: 15.2
• Packaging length [cm]: 27.8
• Packaging width [cm]: 27.8
• Packaging height [cm]: 15.5
• Weight [kg]: 3.6
• Tootja: TEXTAR TARCZE HAMULCOWE

Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs

• Installatsiooni pool: Tagasild
• Ehitusaasta alates: 08.1992
• Kogus pakendis: 2
• Brake Disc Type: solid
• Outer Diameter [mm]: 245
• Brake Disc Thickness [mm]: 10
• Minimum thickness [mm]: 8
• Centering Diameter [mm]: 68
• Height [mm]: 64
• Thread Size: 15
• Number of Holes: 5
• Bolt Hole Circle Ø [mm]: 112
• Colour: black
• Surface: Painted
• Test Mark: E190R-02C0190/0539
• Tootja: TRW
• Kvaliteediklass: Q
• Nimetus: Brake discs

SVHC: No information available, please contact the manufacturer!

• Installatsiooni pool: Tagasild
• Kogus pakendis: 2
• Brake Disc Type: solid
• Surface: Coated
• Outer Diameter [mm]: 245
• Brake Disc Thickness [mm]: 10
• Height [mm]: 64
• Rim Hole Number: 5
• Bolt Hole Circle Ø [mm]: 112
• Centering Diameter [mm]: 68
• Test Mark: ECE R90 APPROVED
• Minimum thickness [mm]: 8
• Weight [kg]: 3.6
• Hole Arrangement/Number: 5/5
• Tootja: ZIMMERMANN

• Ehitusaasta alates: 08.1992
• Ehitusaasta kuni: 06.1994
• Installatsiooni pool: Esisild
• Kogus pakendis: 2
• Height [mm]: 46
• Number of Holes: 5
• Outer Diameter [mm]: 288
• Brake Disc Thickness [mm]: 25
• Centering Diameter [mm]: 68
• Brake Disc Type: internally vented
• Minimum thickness [mm]: 23
• Nimetus: LPR A1371V
• Tootja: LPR

• Installatsiooni pool: Esisild
• Piduriketta liik: sisemine õhutus
• Kõrgus (mm): 46,2
• Pidurikettajämedus [mm]: 25
• Välisläbimõõt [mm]: 288
• Aukude arv: 5
• Tsentri läbimõõt (mm): 68
• Tootja: JPN

• Installatsiooni pool: Esisild
• Piduri-/sõidudünaamika: Sõidukitele koos ABS-ga
• Outer Diameter [mm]: 288
• Brake Disc Thickness [mm]: 25
• Height [mm]: 46.2
• Rim Hole Number: 5
• Brake Disc Type: Vented
• Bolt Hole Circle Ø [mm]: 112
• Hub Diameter [mm]: 148
• Weight [kg]: 7.71
• Installation Information: Important: Observe Fitting Instructions
• Tootja: A.B.S.

• Brake Disc Thickness [mm]: 25
• Rim Hole Number: 5
• Number of mounting bores: 1
• Thickness [mm]: 46
• Outer Diameter [mm]: 288
• Bolt Hole Circle Ø [mm]: 112
• Surface: Coated
• Brake Disc Type: internally vented
• Fitting Position: Front Axle
• Minimum thickness [mm]: 23
• Centering Diameter [mm]: 68
• Weight [kg]: 7.7
• Observe service information:
• Tootja: FEBI BILSTEIN
• Kogus pakendis: 2

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Ehitusaasta alates: 04.1992
• Installatsiooni pool: Tagasild
• Kogus pakendis: 2
• Outer Diameter [mm]: 245
• Brake Disc Thickness [mm]: 10
• Minimum thickness [mm]: 8
• Brake Disc Type: solid
• Number of Holes: 5
• Surface: Coated
• Bolt Hole Circle Ø [mm]: 112
• Height [mm]: 64.2
• Centering Diameter [mm]: 68
• Inner Diameter [mm]: 135.5
• Bore Diameter [mm]: 15.4
• Test Mark: E1 90R-02C0859/1217
• MAPP code available:
• Tootja: ATE

General Information: Sure Thing, ATE! The PowerDisc shows what it can do. Looks better - wears less The brake disc with a profile pays off: The cleaning effect of the continuous groove ensures more even wear of the brake disc and a marked reduction in the scoring that can occur on both brake disc and brake pads. Score-free wear even in heavy-duty use extends the life of the brake discs - and also offers better looks, particularly for wheel rims of today's modern and open style. The multipurpose groove permits visual detection of wear at a glance, without awkward, time-consuming and expensive removal or special measuring tools. If the entire groove has been worn away, the brake disc has reached its thickness limit and must be replaced. The high temperatures generated during braking result in gases between the brake disc and brake pad. These gases c onsiderably impair the braking effect (fading). The PowerDisc channels off the gases via the multifunctional groove and in so doing ensures dependable braking. This brake disc has been thought out down to the last detail : Conventional brake discs have to be cleaned before assembly in an often very expensive and time consuming process using environmentally harmful agents. Poor cleaning often causes permanent impairment of the friction between the brake pads and the brake disc. The new corrosion protection on the ATE PowerDisc, however, no longer has to be removed before assembly and so remains on the brake disc. Protected and sealed in this way, the ATE PowerDisc is less prone to rust, shortens the installation time, and helps protect the enviro nment. Many benefits - thanks to corrosion protection The ATE PowerDisc is certified for general use in Germany (ABE) - i.e. no entry in the vehicle documents is needed. That saves you time and money. Braking like the professionals The complete range Greater safety and longer life make the ATE PowerDisc a disc that could well be a big success, which you can have installed by your garage right away. And if you have any other questions to do with brakes and the ATE product range, your friendly brake expert there will only be too glad to help you. Our ATE PowerDisc has already been proven in many long-distance racing events and touring car championships. And with its outstanding braking characteristics on both dry and wet surfaces, it's the ideal choice for the New Beetle and Lupo Cups, and in the Formula König and Formula 3. Everything's in favour of the ATE PowerDisc: Water and dirt can considerably reduce the effectiveness of the brake pads. Our answer is: the innovative ATE PowerDisc, the only brake disc with a continuous multipurpose groove, which channels off water, dirt and the gases generated between the brake disc and the brake pads by high temperatures during braking, rather like the tread of a tyre does. This considerably increases your safety, reduces scoring, and extends the life of the brake disc. And besides braking so well, it looks better for a longer pe riod. The ATE PowerDisc with multipurpose groove has clear advantages: - general certification (ABE) - better response in wet conditions - shorter running-in period for the newly fitted pad and dis c - better appearance - wear detection - improved corrosion protection Technical Information: For vehicles without ABS, a PowerDisc can be used on the rea r axle only if there is one on the front axle. The General Operating Permit (ABE) for the PowerDisc applies to operation on German roads in accordance with the German Road Traffic Registration Ordinance (StVZO). Other countries may require additional type approvals for use on roads.

• Installatsiooni pool: Esisild
• Kogus pakendis: 2
• Brake Disc Type: Vented
• Number of Holes: 5
• Test Mark: E1 90R-02C0289/1675
• Surface: Oiled
• Outer Diameter [mm]: 288
• Brake Disc Thickness [mm]: 24.9
• Minimum thickness [mm]: 23
• Centering Diameter [mm]: 68
• Height [mm]: 46.5
• Tootja: DELPHI LOCKHEED HAMULCE
• Nimetus: DE BG2745

• Kogus pakendis: 2
• Fitting Position: Front Axle
• Brake Disc Type: Vented
• Outer Diameter [mm]: 288
• Hub Diameter [mm]: 147.5
• Centering Diameter [mm]: 68
• Brake Disc Thickness [mm]: 25
• Height [mm]: 46.5
• Rim Hole Number: 5
• Bolt Hole Circle Ø [mm]: 112
• Replace in pairs only:
• Tootja: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Brake Disc Thickness [mm]: 15
• Rim Hole Number: 5
• Thickness [mm]: 46.2
• Outer Diameter [mm]: 288
• Bolt Hole Circle Ø [mm]: 112
• Surface: Coated
• Brake Disc Type: solid
• Fitting Position: Front Axle
• Minimum thickness [mm]: 13
• Centering Diameter [mm]: 68
• Weight [kg]: 6.233
• Nimetus: SW 30 90 8347
• Tootja: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Brake Disc Thickness [mm]: 25
• Rim Hole Number: 5
• Number of mounting bores: 1
• Thickness [mm]: 46
• Outer Diameter [mm]: 288
• Bolt Hole Circle Ø [mm]: 112
• Surface: Coated
• Brake Disc Type: internally vented
• Fitting Position: Front Axle
• Minimum thickness [mm]: 23
• Centering Diameter [mm]: 68
• Weight [kg]: 7.7
• Observe service information:
• Tootja: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Brake Disc Thickness [mm]: 25
• Rim Hole Number: 5
• Number of mounting bores: 1
• Thickness [mm]: 46
• Outer Diameter [mm]: 288
• Bolt Hole Circle Ø [mm]: 112
• Surface: Coated
• Brake Disc Type: internally vented
• Fitting Position: Front Axle
• Minimum thickness [mm]: 23
• Centering Diameter [mm]: 68
• Weight [kg]: 7.7
• Nimetus: SW 32 90 8352
• Tootja: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: Esisild
• Ehitusaasta alates: 08.1992
• Kogus pakendis: 2
• Brake Disc Type: Vented
• Outer Diameter [mm]: 288
• Brake Disc Thickness [mm]: 25
• Minimum thickness [mm]: 23
• Centering Diameter [mm]: 68
• Height [mm]: 46
• Number of Holes: 5
• Thread Size: 15
• Bolt Hole Circle Ø [mm]: 112
• Machining: High-carbon
• Colour: black
• Surface: Painted
• Test Mark: E190R-02C0185/0544
• Tootja: TRW

SVHC: No information available, please contact the manufacturer!

• Installatsiooni pool: Tagasild
• Kogus pakendis: 2
• Kontrolltähistus: R90 Homologated
• Kõrgus (mm): 63,9
• Kaal (kg): 7,7
• Piduriketta liik: täis
• Pidurikettajämedus [mm]: 10
• Miinimumjämedus (mm): 8
• Välisläbimõõt [mm]: 245
• Aukude arv: 5
• Tsentri läbimõõt (mm): 68
• Väändejõud [Nm]: 120
• Ava Ø (mm): 112
• Pealispind: kaetud
• Pidurisüsteem: TRW
• Konteineri tüüp: Sahtel
• Hulgaühik: Komplekt
• Piirangutega toode/piirangu info 2: ilma kruvideta
• Versioon: JC
• pakendi pikkus [cm]: 27,5
• pakendi laius [cm]: 27,5
• pakendi kõrgus [cm]: 15
• Tootja: JURID

• Ehitusaasta alates: 04.1992
• Fitting Position: Front Axle
• Brake Disc Type: Vented
• Surface: Coated
• Number of Holes: 5
• Bolt Hole Circle Ø [mm]: 112
• Height [mm]: 47
• Outer Diameter [mm]: 288
• Centering Diameter [mm]: 68
• Brake Disc Thickness [mm]: 25
• for OE number: 4A0 615 301 C
• Tootja: KAMOKA

• Installatsiooni pool: Esisild
• Kogus pakendis: 2
• Test Mark: ECE-R90
• Height [mm]: 46.2
• Brake Disc Type: Vented
• Brake Disc Thickness [mm]: 24.9
• Outer Diameter [mm]: 287.7
• Number of Holes: 5
• Bolt Hole Circle Ø [mm]: 68
• Surface: Painted
• Tootja: METELLI UKL.HAMULCOWY

• Installatsiooni pool: Esisild
• Outer Diameter [mm]: 288
• Brake Disc Thickness [mm]: 25
• Minimum thickness [mm]: 23
• Height [mm]: 46.4
• Bolt Hole Circle Ø [mm]: 112
• Brake Disc Type: Vented, internally vented
• Centering Diameter [mm]: 68
• Number of Holes: 9
• Surface: Coated
• Machining: High-carbon
• Supplementary Article/Info 2: with bolts/screws
• fulfils ECE norm: ECE-R90
• Bore Diameter up to [mm]: 15.4
• Tootja: BOSCH
• Kogus pakendis: 2

• Installatsiooni pool: Tagasild
• Ehitusaasta alates: 08.1992
• Piduriketta liik: täis
• Kõrgus (mm): 64
• Pidurikettajämedus [mm]: 10
• Keermemõõt: 15
• Miinimumjämedus (mm): 8
• Välisläbimõõt [mm]: 245
• Aukude arv: 5
• Tsentri läbimõõt (mm): 68
• Ava Ø (mm): 112
• Tootja: PROFIPOWER

• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 10
• Outer Diameter [mm]: 245
• General Information: brake disc; rear
• Tootja: BORSEHUNG

• Installatsiooni pool: Esisild
• Kogus pakendis: 2
• Height [mm]: 46
• Brake Disc Type: internally vented
• Brake Disc Thickness [mm]: 25
• Minimum thickness [mm]: 23
• Number of bores: 5
• Outer Diameter [mm]: 288
• Number of Holes: 5
• Centering Diameter [mm]: 68
• Bolt Hole Circle Ø [mm]: 112
• Surface: Coated
• Nimetus: SK VKBD80189V2
• Tootja: SKF

• Installatsiooni pool: Esisild
• Brake Disc Type: Externally Vented
• Outer Diameter [mm]: 288
• Brake Disc Thickness [mm]: 25
• Height [mm]: 46.2
• Minimum thickness [mm]: 23
• Machining: High-carbon
• Surface: Coated
• Inner Diameter [mm]: 135.5
• Bolt Hole Circle Ø [mm]: 112
• Centering Diameter [mm]: 68
• Hole Arrangement/Number: 05/10
• Wheel Bolt Bore Diameter [mm]: 15.3
• Weight [kg]: 7.5
• Assy./disassy. by qualified personnel required!:
• Nimetus: HE 8DD355127081
• Tootja: HELLA PAGID

Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs

• Installatsiooni pool: Esisild
• Kogus pakendis: 2
• Brake Disc Type: Externally Vented
• Machining: High-carbon
• Surface: Coated
• Outer Diameter [mm]: 288
• Brake Disc Thickness [mm]: 25
• Height [mm]: 47
• Rim Hole Number: 5
• Bolt Hole Circle Ø [mm]: 112
• Centering Diameter [mm]: 68
• Test Mark: ECE R90 APPROVED
• Minimum thickness [mm]: 23
• Weight [kg]: 7.5
• Hole Arrangement/Number: 10/5
• Tootja: ZIMMERMANN

• Ehitusaasta alates: 04.1992
• Installatsiooni pool: Esisild
• Kogus pakendis: 2
• Outer Diameter [mm]: 288
• Brake Disc Thickness [mm]: 25
• Minimum thickness [mm]: 23
• Brake Disc Type: Vented
• Machining: High-carbon
• Surface: Coated
• Number of Holes: 5
• Supplementary Article/Info 2: with bolts/screws
• MAPP code available:
• No. of holes 2: 9
• Bolt Hole Circle Ø [mm]: 112
• Height [mm]: 46.5
• Centering Diameter [mm]: 68
• Inner Diameter [mm]: 135
• Bore Diameter [mm]: 15.4
• Test Mark: E1 90R-02C0118/0064
• Tootja: ATE
• Kvaliteediklass: Q
• Nimetus: Brake discs

• Installatsiooni pool: Esisild
• Kogus pakendis: 2
• Brake Disc Type: Externally Vented
• Outer Diameter [mm]: 288
• Brake Disc Thickness [mm]: 25
• Height [mm]: 46.2
• Minimum thickness [mm]: 23
• Machining: High-carbon
• Surface: Coated
• Inner Diameter [mm]: 135.5
• Bolt Hole Circle Ø [mm]: 112
• Centering Diameter [mm]: 68
• Hole Arrangement/Number: 05/10
• Wheel Bolt Bore Diameter [mm]: 15.3
• Packaging length [cm]: 30.8
• Packaging width [cm]: 30.8
• Packaging height [cm]: 12.7
• Weight [kg]: 7.5
• Tootja: TEXTAR TARCZE HAMULCOWE

Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs

• Installatsiooni pool: Esisild
• Kogus pakendis: 2
• Kontrolltähistus: R90 Homologated
• Kõrgus (mm): 46
• Kaal (kg): 15,66
• Piduriketta liik: õhutusega
• Pidurikettajämedus [mm]: 25
• Miinimumjämedus (mm): 23
• Välisläbimõõt [mm]: 288
• Aukude arv: 5
• Tsentri läbimõõt (mm): 68
• Väändejõud [Nm]: 120
• Ava Ø (mm): 112
• Pealispind: kaetud
• Pidurisüsteem: ATE
• Konteineri tüüp: Sahtel
• Hulgaühik: Komplekt
• Piirangutega toode/piirangu info 2: koos kruvidega
• Versioon: JC
• pakendi pikkus [cm]: 30
• pakendi laius [cm]: 30
• pakendi kõrgus [cm]: 12
• Tootja: JURID

• Ehitusaasta alates: 04.1992
• Installatsiooni pool: Esisild
• Kogus pakendis: 2
• Outer Diameter [mm]: 288
• Brake Disc Thickness [mm]: 25
• Minimum thickness [mm]: 23
• Brake Disc Type: Vented
• Machining: High-carbon
• Surface: Coated
• Number of Holes: 5
• No. of holes 2: 9
• Bolt Hole Circle Ø [mm]: 112
• Height [mm]: 46.5
• Centering Diameter [mm]: 68
• Inner Diameter [mm]: 135
• Bore Diameter [mm]: 15.4
• MAPP code available:
• Tootja: ATE
• Kvaliteediklass: Q
• Nimetus: Brake discs

General Information: Sure Thing, ATE! The PowerDisc shows what it can do. Looks better - wears less The brake disc with a profile pays off: The cleaning effect of the continuous groove ensures more even wear of the brake disc and a marked reduction in the scoring that can occur on both brake disc and brake pads. Score-free wear even in heavy-duty use extends the life of the brake discs - and also offers better looks, particularly for wheel rims of today's modern and open style. The multipurpose groove permits visual detection of wear at a glance, without awkward, time-consuming and expensive removal or special measuring tools. If the entire groove has been worn away, the brake disc has reached its thickness limit and must be replaced. The high temperatures generated during braking result in gases between the brake disc and brake pad. These gases c onsiderably impair the braking effect (fading). The PowerDisc channels off the gases via the multifunctional groove and in so doing ensures dependable braking. This brake disc has been thought out down to the last detail : Conventional brake discs have to be cleaned before assembly in an often very expensive and time consuming process using environmentally harmful agents. Poor cleaning often causes permanent impairment of the friction between the brake pads and the brake disc. The new corrosion protection on the ATE PowerDisc, however, no longer has to be removed before assembly and so remains on the brake disc. Protected and sealed in this way, the ATE PowerDisc is less prone to rust, shortens the installation time, and helps protect the enviro nment. Many benefits - thanks to corrosion protection The ATE PowerDisc is certified for general use in Germany (ABE) - i.e. no entry in the vehicle documents is needed. That saves you time and money. Braking like the professionals The complete range Greater safety and longer life make the ATE PowerDisc a disc that could well be a big success, which you can have installed by your garage right away. And if you have any other questions to do with brakes and the ATE product range, your friendly brake expert there will only be too glad to help you. Our ATE PowerDisc has already been proven in many long-distance racing events and touring car championships. And with its outstanding braking characteristics on both dry and wet surfaces, it's the ideal choice for the New Beetle and Lupo Cups, and in the Formula König and Formula 3. Everything's in favour of the ATE PowerDisc: Water and dirt can considerably reduce the effectiveness of the brake pads. Our answer is: the innovative ATE PowerDisc, the only brake disc with a continuous multipurpose groove, which channels off water, dirt and the gases generated between the brake disc and the brake pads by high temperatures during braking, rather like the tread of a tyre does. This considerably increases your safety, reduces scoring, and extends the life of the brake disc. And besides braking so well, it looks better for a longer pe riod. The ATE PowerDisc with multipurpose groove has clear advantages: - general certification (ABE) - better response in wet conditions - shorter running-in period for the newly fitted pad and dis c - better appearance - wear detection - improved corrosion protection Technical Information: For vehicles without ABS, a PowerDisc can be used on the rea r axle only if there is one on the front axle. The General Operating Permit (ABE) for the PowerDisc applies to operation on German roads in accordance with the German Road Traffic Registration Ordinance (StVZO). Other countries may require additional type approvals for use on roads.

• Installatsiooni pool: Esisild
• Piduri-/sõidudün.tooteseos: ABS jaoks
• Piduriketta liik: õhutusega
• Kõrgus (mm): 46
• Pidurikettajämedus [mm]: 25
• Keermemõõt: 15
• Miinimumjämedus (mm): 23
• Välisläbimõõt [mm]: 288
• Aukude arv: 5
• Tsentri läbimõõt (mm): 68
• Ava Ø (mm): 112
• Tootja: PROFIPOWER

• Installatsiooni pool: Tagasild
• Kogus pakendis: 2
• Brake Disc Type: solid, Perforated
• Surface: Coated
• Outer Diameter [mm]: 245
• Brake Disc Thickness [mm]: 10
• Height [mm]: 64
• Rim Hole Number: 5
• Bolt Hole Circle Ø [mm]: 112
• Centering Diameter [mm]: 68
• Test Mark: KBA 60934
• Minimum thickness [mm]: 8
• Weight [kg]: 3.6
• Hole Arrangement/Number: 5/5
• Tootja: ZIMMERMANN

• Installatsiooni pool: Esisild
• Kogus pakendis: 2
• Brake Disc Type: Externally Vented, Perforated
• Machining: High-carbon
• Surface: Coated
• Outer Diameter [mm]: 288
• Brake Disc Thickness [mm]: 25
• Height [mm]: 47
• Rim Hole Number: 5
• Bolt Hole Circle Ø [mm]: 112
• Centering Diameter [mm]: 68
• Test Mark: ECE R90 APPROVED
• Minimum thickness [mm]: 23
• Weight [kg]: 7.6
• Hole Arrangement/Number: 10/5
• Tootja: ZIMMERMANN