• Materjal: Plastik
• Tootja: JP GROUP A/S
• Lisainfo: PAKENDIS 10 tk

• Jämedus/Tugevus (mm): 3,5
• Siseläbimõõt [mm]: 19,5
• Materjal: NBR (Nitril-Butadien-Kautschuk)
• Tootja: JP GROUP
• Lisainfo: PAKENDIS 10 tk

• Kogus pakendis: 100
• Tootja: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Materjal: Plastik
• OE-numbri jaoks: 032121142
• Tootja: DELLO AUTOMEGA

• Hulk: 1
• Kaal (kg): 0,015
• Materjal: Plastik
• vajaminev tükihulk: 1
• Üldine informatsioon: retaining spring
• Tootja: VIKA

• Jämedus/Tugevus (mm): 3,5
• Siseläbimõõt [mm]: 19,5
• Materjal: NBR (Nitril-Butadien-Kautschuk)
• Kaal (kg): 0,003
• Nimetus: TIHEND,JAHUTUSVEDEDELIKUFLANTS
• Tootja: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Materjal: Plastik
• Kaal (kg): 0,015
• Nimetus: KINNITUSVEDRU, JAHUTUSVEDELIKUFLANTS-SULGURKORK
• Tootja: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Materjal: Plastik
• Nimetus: STOPPER
• Tootja: MAX

• Laius (mm): 32
• Jämedus/Tugevus (mm): 1,98
• Materjal: Metall
• Kaal (kg): 0,001
• Nimetus: KINNITUSVEDRU, JAHUTUSVEDELIKUFLANTS-SULGURKORK
• Tootja: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: Silindripea
• Kogus pakendis: 25
• Siseläbimõõt [mm]: 50
• Välisläbimõõt [mm]: 56,3
• Jämedus/Tugevus (mm): 3,15
• Materjal: EPDM (Etüleen-Propüleen-Dieen-Kautsuk)
• Kuju: O-rõngas
• Tootja: ELRING

• Tootja: JP GROUP
• Lisainfo: PAKENDIS 10 tk

• tootjanumbri jaoks: 7920045
• Tootja: KAMOKA

• tootjanumbri jaoks: 7920056
• Tootja: KAMOKA

• Korpuse materjal: Plastik
• Värv: must
• OE-numbri jaoks: 1K0122291J
• Tootja: DELLO AUTOMEGA

• Üldine informatsioon: pipe union
• Tootja: VIKA

• Seerianumber: CTM-VW-087
• Tootja: NTY

• tootjanumbri jaoks: 7920073
• Tootja: KAMOKA

• tootjanumbri jaoks: 7920110
• Tootja: KAMOKA

• Käigukasti liik: Käigukast
• Installatsiooni pool: üleval, Mootoriradiaator
• Piirangutega toode/piirangu info: koos tihendiga
• Materjal: GFK (klaaskiuga tugevdatud plastmass)
• OE-numbri jaoks: 3C0 122 291
• Nimetus: Jahutusvedeliku flants
• Tootja: MAX

• Hulk: 1
• Üldine informatsioon: pipe union
• Tootja: VIKA

• Käigukasti liik: Käigukast, Automaatkäigukast
• Plokieraldus:
• PR-numbri jaoks: 8Z4, 8Z5, 8Z7
• Korpuse materjal: Plastik
• Värv: must
• OE-numbri jaoks: 3C0122291D
• Tootja: DELLO AUTOMEGA

• OE-numbri jaoks: 1K0122291H
• Tootja: BGA

• Kaal (kg): 0,03
• Piirangutega toode/piirangu info: koos kiirühendusega
• OE-numbri jaoks: 1K0 122 291 J
• Tootja: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Käigukasti liik: Käigukast, Automaatkäigukast
• Plokieraldus:
• PR-numbri jaoks: 8Z4, 8Z5, 8Z7
• Installatsiooni pool: Mootoriradiaator, üleval
• Tootja: JP GROUP
• Lisainfo: Coolant Flange

• Materjal: Plastik
• Seerianumber: CTM-VW-043
• Tootja: NTY

• Installatsiooni pool: vasakul, ees
• Piirangutega toode/piirangu info: ilma tihendita
• Piirangutega toode/piirangu info 2: ilma andurita
• Tootja: DELLO AUTOMEGA

• Hulk: 1
• Üldine informatsioon: pipe union
• Tootja: VIKA

• Läbimõõt 1 (mm): 20
• Läbimõõt 2 (mm): 36
• OE-numbri jaoks: 3B0122291B
• Tootja: MEAT & DORIA

• Piirangutega toode/piirangu info: koos tihendiga
• Piirangutega toode/piirangu info 2: koos klambriga
• OE-numbri jaoks: 1K0 122 291H
• soovitatav remondilaiendus, vaata lisavarustuse nimekirja:
• Sisend-/väljundite arv: 2
• Materjal: GFK (klaaskiuga tugevdatud plastmass)
• Tootja: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Kaal (g): 29
• Materjal: Plastik
• OE-numbri jaoks: 1K0122291H
• pakendi pikkus [cm]: 7,5
• pakendi laius [cm]: 7,5
• pakendi kõrgus [cm]: 8,3
• Tootja: MOTORAD

• Installatsiooni pool: Silindripea, vasakul
• Tootja: JP GROUP
• Lisainfo: PAKENDIS 10 tk

• Installatsiooni pool: Silindripea
• Jämedus/Tugevus (mm): 5
• Laius (mm): 56
• Pikkus (mm): 56
• Nimetus: Tihend,jahutusvededelikuflants
• Tootja: AJU

• Piirangutega toode/piirangu info: koos tihendiga
• Piirangutega toode/piirangu info 2: koos klambriga
• OE-numbri jaoks: 1K0 122 291J
• soovitatav remondilaiendus, vaata lisavarustuse nimekirja:
• Sisend-/väljundite arv: 2
• Materjal: GFK (klaaskiuga tugevdatud plastmass)
• Tootja: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• PR-numbri jaoks: 1SA
• Materjal: GFK (klaaskiuga tugevdatud plastmass)
• Piirangutega toode/piirangu info: koos tihendiga
• OE-numbri jaoks: 1K0 122 291L
• Nimetus: Jahutusvedeliku flants
• Tootja: MAX

• Kaal (kg): 0,03
• OE-numbri jaoks: 1K0 122 291 H
• Piirangutega toode/piirangu info: koos kiirühendusega
• Tootja: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• OE-numbri jaoks: 3B0122291B
• Piirangutega toode/piirangu info: koos tihendiga
• Kaal (g): 29
• Piirangutega toode/piirangu info 2: ilma termostaadita
• Nimetus: IM 90582
• Tootja: ORIGINAL IMPERIUM

• Käigukasti liik: Käigukast
• Installatsiooni pool: Mootoriradiaator, üleval
• Piirangutega toode/piirangu info 2: koos klambriga
• Piirangutega toode/piirangu info: koos tihendiga
• OE-numbri jaoks: 3C0 122 291
• soovitatav remondilaiendus, vaata lisavarustuse nimekirja:
• Sisend-/väljundite arv: 3
• Materjal: GFK (klaaskiuga tugevdatud plastmass)
• Nimetus: JAHUTUSVEDELIKU FLANTS
• Tootja: HAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Kaal (g): 80
• Materjal: Plastik
• OE-numbri jaoks: 03G121121D
• Värv: must
• Kinnitusaukude hulk: 2
• pakendi pikkus [cm]: 9,1
• pakendi laius [cm]: 9,1
• pakendi kõrgus [cm]: 13,5
• Tootja: MOTORAD

• Installatsiooni pool: Esisild
• Materjal: Plastik
• Kaal (g): 30
• Tootja: METALCAUCHO

• Üldine informatsioon: pipe union
• Tootja: VIKA

• PR-numbri jaoks: 1SA
• Piirangutega toode/piirangu info 2: koos klambriga
• Piirangutega toode/piirangu info: koos tihendiga
• OE-numbri jaoks: 1K0 122 291L
• soovitatav remondilaiendus, vaata lisavarustuse nimekirja:
• Sisend-/väljundite arv: 2
• Materjal: GFK (klaaskiuga tugevdatud plastmass)
• Nimetus: Jahutusvedeliku flants
• Tootja: HAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• OE-numbri jaoks: 03L121121A
• Installatsiooni pool: vasakul
• Piirangutega toode/piirangu info: ilma tihendita
• Kaal (g): 87
• Piirangutega toode/piirangu info 2: ilma termostaadita
• Nimetus: IM 90422
• Tootja: ORIGINAL IMPERIUM

• Hulk: 1
• Materjal: Plastik
• Kaal (kg): 0,06
• Piirangutega toode/piirangu info: koos tihendiga
• Installatsiooni pool: ees
• Tootja: 3RG

• Materjal: Plastik
• Küte/Jahutus: koos termolüliti-ühendus
• Installatsiooni pool: ees
• Nimetus: Jahutusvedeliku flants
• Tootja: HAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Materjal: Plastik
• Kaal (kg): 0,05
• OE-numbri jaoks: 3C0 122 291
• Piirangutega toode/piirangu info: koos kiirühendusega
• Tootja: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: vasakul
• Piirangutega toode/piirangu info: koos tihendiga
• Kaal (g): 90
• Piirangutega toode/piirangu info 2: ilma termostaadita
• Tootja: METALCAUCHO

• Mootorikood: BUY
• Nimetus: EP 1.660.007
• Tootja: EPS

• Mootorikood: BUY
• Tootja: FACET

• Mootorikood: BUY
• Nimetus: EP 1.660.021
• Tootja: EPS

• Hulk: 1
• Materjal: Plastik
• Installatsiooni pool: ees, üleval
• Läbimõõt 1 (mm): 20
• Läbimõõt 2 (mm): 32
• Läbimõõt 3 (mm): 32
• Tootja: 3RG

• OE-numbri jaoks: 3B0 122 291 B
• Kaal (kg): 0,036
• Tootja: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Hulk: 1
• Materjal: Plastik
• Installatsiooni pool: kastipoolselt, stirnseitig, Silindripea
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Üldine informatsioon: pipe union
• Tootja: VIKA

• OE-numbri jaoks: 03G121132B
• Tootja: BGA

• Korpusetüüp: Sünteetikakorpus
• Installatsiooni pool: Silindripea, vasakul, ees, Termostaat
• Piirangutega toode/piirangu info 2: ilma andurita
• Piirangutega toode/piirangu info: ilma tihendita
• Tootja: METZGER

• Tootmise kuupäev alates: 06/08
• OE-numbri jaoks: 03L121121A
• Nimetus: Jahutusvedeliku flants
• Tootja: SAS

• Käigukasti liik: Käigukast
• Kaal (kg): 0,055
• Materjal: Plastik
• Tootja: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Piirangutega toode/piirangu info 2: ilma andurita
• Kaal (g): 150
• Materjal: Plastik
• OE-numbri jaoks: 03G121132
• pakendi pikkus [cm]: 15,9
• pakendi laius [cm]: 15
• pakendi kõrgus [cm]: 11
• Tootja: MOTORAD

• Materjal: Plastik
• Installatsiooni pool: kastipoolselt, Silindripea
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Nimetus: JAHUTUSVEDELIKU FLANTS
• Tootja: HAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Installatsiooni pool: Silindripea, kastipoolselt, stirnseitig
• Piirangutega toode/piirangu info: koos tihendiga
• Tootja: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Materjal: Plastik
• Kaal (kg): 0,03
• OE-numbri jaoks: 1K0 122 291 H
• Piirangutega toode/piirangu info: koos tihendiga
• Piirangutega toode/piirangu info 2: koos klambriga
• Tootja: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Kaal (kg): 0,137
• Piirangutega toode/piirangu info 2: ilma termostaadita
• Tootja: METALCAUCHO

• Installatsiooni pool: Silindripea, vasakul
• Kaal (kg): 0,128
• Tootja: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Kaal (kg): 0,151
• OE-numbri jaoks: 03G 121 132 B
• Piirangutega toode/piirangu info: koos tihendiga
• Tootja: FEBI

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Mootorikood: BUY
• Läbimõõt 1 (mm): 20
• Läbimõõt 2 (mm): 32
• Läbimõõt 3 (mm): 32
• OE-numbri jaoks: 03G121132B
• Tootja: MEAT&DORIA

• Kaal (kg): 0,151
• OE-numbri jaoks: 03G 121 132 B
• Piirangutega toode/piirangu info: koos tihendiga
• Nimetus: SW 33 10 4923
• Tootja: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: Silindripea, kastipoolselt
• Korpusetüüp: Sünteetikakorpus
• Piirangutega toode/piirangu info 2: ilma andurita
• Piirangutega toode/piirangu info: koos tihendiga
• Tootja: METZGER

• Piirangutega toode/piirangu info: koos tihendiga
• Kaal (kg): 0,155
• Tootja: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.