Tootekategooriad
Filtrid Pidurid vedrustus/alusvanker Roolisüsteem Jahutus/kliima Elektrisüsteem Veokonks/lisad Jõuülekanne Väljalaskesüsteem Kere Süüte-/eelsüütesüsteem Mootor Klaasid/klaasipuhastus Valgustus Kütus Kabiinivarustus HooldusToode
Kirjeldus
Laoseis
Hind
(km-ga)
- Kogus pakendis: 25
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 20
- Thickness [mm]: 2
- Material: Steel
- Shape: C Shape
- Lisainfo: 591.840 ELR
- Kogus pakendis: 25
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 20
- Thickness [mm]: 2
- Material: Copper
- Shape: C Shape
- DIN/ISO: 7603
-
Alternative Repair Kit: 017.736,
036.400, 505.550, 505.540 - Tootja: ELRING
- Lisainfo: 813.036 ELR
- Kogus pakendis: 25
- Thickness [mm]: 2
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 21
- Weight [kg]: 0.001
- Fitting Position: Oil Sump
- Tootja: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Thread Size: M14x1,
5 - Length [mm]: 12
- Bolt Head-/Nut Design: Hexagon Socket
- Additionally required articles (article numbers): 100.058.100
- Tootja: FA1 FISCHER
- Thickness [mm]: 2
- Inner Diameter [mm]: 14.4
- Outer Diameter [mm]: 19.8
- DIN/ISO: 7603
- Material: Steel
- Weight [kg]: 0.005
- Tootja: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 15
- Outer Diameter [mm]: 19
-
External Thread Size: M14 x 1,
5 - Thread Length [mm]: 10
- Spanner Size: 6
- Bolt Head-/Nut Design: Hexagon Socket
- Material: Steel
- Screw length below head [mm]: 12
- Weight [kg]: 0.018
- Supplementary Article/Info 2: with seal ring
- Tootja: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Kogus pakendis: 10
- Thread Size: M 14
- Thread Pitch [mm]: 1.5
- Thread Length [mm]: 12
- Overall Length [mm]: 16
- Material: Steel
- Strength class: 8.8
- Bolt/Nut Version: Flat Head
- Bolt Head-/Nut Design: Hexagon Socket
- Tootja: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Thread Size: M14x1,
5x12 - Bolt Head-/Nut Design: Hexagon Socket
- Supplementary Article/Info 2: with seal ring
- Tootja: ELRING
-
Thread Size: M14x1,
5 - Length [mm]: 12
- Bolt Head-/Nut Design: Hexagon Socket
- Supplementary Article/Info 2: with seal ring
- Nimetus: FI 257807
- Tootja: FA1
- Length [mm]: 15
- Outer Diameter [mm]: 19
-
External Thread Size: M14 x 1,
5 - Thread Length [mm]: 10
- Spanner Size: 6
- Bolt Head-/Nut Design: Hexagon Socket
- Material: Steel
- Screw length below head [mm]: 12
- Weight [kg]: 0.015
- Supplementary Article/Info 2: without seal ring
- Tootja: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Kogus pakendis: 10
- Thread Size: M 18
- Thread Length [mm]: 12
- Thread Pitch [mm]: 1.5
- Material: Steel
-
Surface: Zinc-
coated - Bolt/Nut Version: Flat Head
- Sealing Ring Diameter [mm]: 22
- Bolt Head-/Nut Design: Hexagon Socket
- Tootja: TOPRAN
DIN standards (Screws): DIN 908 (screw plugs with collar and internal drive) General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Thread Size: M14x1,
5x12 - Bolt Head-/Nut Design: Hexagon Socket
- Alternative Repair Kit: 982.340
- Supplementary Article/Info 2: without seal ring
- Tootja: ELRING
-
Keermemõõt: M14x1,
5x12 - Kruvipea-/Mutriprofiil: sisekuuskant
- Piirangutega toode/piirangu info 2: koos rõngastihendiga
- Tootja: DR.MOTOR AUTOMOTIVE
- Length [mm]: 15
- Outer Diameter [mm]: 19
-
External Thread Size: M14 x 1,
5 - Thread Length [mm]: 10
- Spanner Size: 6
- Bolt Head-/Nut Design: Hexagon Socket
- Material: Steel
- Screw length below head [mm]: 12
- Supplementary Article/Info 2: without seal ring
- Nimetus: SW 30 93 8788
- Tootja: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 15
-
Thread Size: M 14 x 1,
50 x 12 - Spanner Size: 6
- Packing Type: Blister Pack
- Nimetus: COU 220150S
- Tootja: CORTECO
- Materjal: Metall
-
Keermemõõt: M14x1,
5 - Pikkus (mm): 15
- Kruvipikkus kruvipea all [mm]: 12
- Kruvipea-/Mutriprofiil: sisekuuskant
- Võtmekaugus: 6
- Materjal tihend: Alumiinium
- Siseläbimõõt [mm]: 14
- Välisläbimõõt [mm]: 20
- Jämedus/Tugevus (mm): 2
- Konteineri tüüp: Kott
- Piirangutega toode/piirangu info 2: koos rõngastihendiga
- Tootja: METZGER
- Kogus pakendis: 25
- Length [mm]: 15.3
- Outer Diameter [mm]: 19
-
External Thread Size: M14 x 1,
5 - Thread Length [mm]: 9
- Quality/ Grade: 4.8
- Spanner Size: T45
- Bolt Head-/Nut Design: Female Torx
- Material: Steel
-
Surface: Zink-
nickel coated - Screw length below head [mm]: 12
- Weight [kg]: 0.022
- Supplementary Article/Info 2: with seal ring
- Tootja: FEBI BILSTEIN
- Lisainfo: FE103349
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 15.3
- Outer Diameter [mm]: 19
-
External Thread Size: M14 x 1,
5 - Thread Length [mm]: 9
- Quality/ Grade: 4.8
- Spanner Size: T45
- Bolt Head-/Nut Design: Female Torx
- Material: Steel
-
Surface: Zink-
nickel coated - Screw length below head [mm]: 12
- Weight [kg]: 0.022
- Supplementary Article/Info 2: with seal ring
- Tootja: FEBI BILSTEIN
- Lisainfo: FE103344
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 15.3
- Outer Diameter [mm]: 19
-
External Thread Size: M14 x 1,
5 - Thread Length [mm]: 9
- Quality/ Grade: 4.8
- Spanner Size: T45
- Bolt Head-/Nut Design: Female Torx
- Material: Steel
-
Surface: Zink-
nickel coated - Screw length below head [mm]: 12
- Weight [kg]: 0.022
- Supplementary Article/Info 2: with seal ring
- Nimetus: SW 30 10 3344
- Tootja: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Kogus pakendis: 10
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 20
- Thickness [mm]: 2
- Shape: C Shape
- Material: Copper
- Alternatively:
- Tootja: FA1
- Weight [kg]: 0.034
-
Thread Size: M22x1,
5 - Packaging length [cm]: 2.7
- Packaging width [cm]: 2.7
- Packaging height [cm]: 1.8
- Tootja: FEBEST
- Kogus pakendis: 100
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 20
- Thickness [mm]: 2
- Shape: C Shape
- Material: Copper
- Tootja: FISCHER
- Kogus pakendis: 100
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 20
- Thickness [mm]: 2
- Shape: C Shape
- Material: Steel
- Kogus pakendis: 10
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 20
- Thickness [mm]: 2
- Shape: C Shape
- Alternatively:
- Material: Steel
Laki Auto universaaltooted
TecDoc sõidukite kataloog
TecDoc veokite kataloog