• Spetsifikatsioon DOT järgi: DOT 4
• keem.omadus: sünteetiline
• Maht(liiter): 1
• Kuivkeemispunkt (°C): 245
• Konteineri tüüp: Pudel
• Lisainfo: 36-0048

Lisainfo: PFB401 TRW

• Spetsifikatsioon DOT järgi: DOT 4
• keem.omadus: sünteetiline
• Maht(liiter): 3
• Kuivkeemispunkt (°C): 245
• Konteineri tüüp: Kanister
• Lisainfo: 36-0049
  3 Liitrit

• Kogus pakendis: 24
• Kuivkeemispunkt (°C): 260
• Keemispunkt (°C): 160
• Spetsifikatsioon DOT järgi: DOT 4
• Maht(liiter): 0,25
• Kaal (kg): 0,301
• Hooldusinfot jälgida:
• Tootja: FEBI BILSTEIN
• Lisainfo: FE26746

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Kogus pakendis: 24
• Spetsifikatsioon DOT järgi: DOT 4
• Keemispunkt (°C): 180
• Kuivkeemispunkt (°C): 260
• DIN/ISO: ISO 4925
• Maht(liiter): 0,25
• Spetsifikatsioon: MB 331.0
• Kaal (kg): 0,301
• Hooldusinfot jälgida:
• Tootja: FEBI BILSTEIN
• Lisainfo: FE26748

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Kogus pakendis: 24
• Spetsifikatsioon DOT järgi: DOT 4, DOT 4 LV
• Kuivkeemispunkt (°C): 265
• Keemispunkt (°C): 170
• Maht(liiter): 0,25
• Kaal (kg): 0,266
• Hooldusinfot jälgida:
• Tootja: FEBI
• Lisainfo: 171876 FEBI

DIN/ISO: ISO 4925 Class 3, ISO 4925 Class 4, ISO 4925 Class 6 Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Keemispunkt (°C): 180
• Spetsifikatsioon DOT järgi: DOT 5.1
• Kuivkeemispunkt (°C): 260
• Maht(liiter): 0,25
• Spetsifikatsioon: FMVSS 116 DOT 5.1, ISO 4925 Classes 4, SAE J 1703
• Kaal (kg): 0,296
• Hooldusinfot jälgida:
• Tootja: FEBI

DIN/ISO: ISO 4925 Class 3, ISO 4925 Class 4, ISO 4925 Class 5.1 Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Kogus pakendis: 24
• Kuivkeemispunkt (°C): 260
• Keemispunkt (°C): 160
• Spetsifikatsioon DOT järgi: DOT 4
• Maht(liiter): 0,5
• Kaal (kg): 1,139
• Hooldusinfot jälgida:
• Tootja: FEBI

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Spetsifikatsioon DOT järgi: DOT 4
• keem.omadus: sünteetiline
• Maht(liiter): 0,5
• Kuivkeemispunkt (°C): 245
• Konteineri tüüp: Pudel
• Tootja: VALEO
• Nimetus: VA 402402

• Keemispunkt (°C): 184
• Spetsifikatsioon DOT järgi: DOT 5.1
• Kuivkeemispunkt (°C): 274
• Maht(liiter): 0,25
• Kaal (kg): 0,296
• Hooldusinfot jälgida:
• Tootja: FEBI BILSTEIN

DIN/ISO: ISO 4925 Class 3, ISO 4925 Class 4, ISO 4925 Class 5.1, ISO 4925 Class 6 Spetsifikatsioon: FMVSS 116 DOT 5.1, ISO 4925 Classes 4, SAE J 1703, ISO 4925 Classes 6 Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Kogus pakendis: 24
• Kuivkeemispunkt (°C): 260
• Spetsifikatsioon DOT järgi: DOT 4
• Keemispunkt (°C): 180
• DIN/ISO: ISO 4925
• Maht(liiter): 0,5
• Spetsifikatsioon: MB 331.0
• Kaal (kg): 1,139
• Hooldusinfot jälgida:
• Tootja: FEBI

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Kogus pakendis: 24
• Spetsifikatsioon DOT järgi: DOT 4, DOT 4 LV
• Keemispunkt (°C): 170
• Kuivkeemispunkt (°C): 265
• Maht(liiter): 0,5
• Kaal (kg): 1,064
• Hooldusinfot jälgida:
• Tootja: FEBI

DIN/ISO: ISO 4925 Class 3, ISO 4925 Class 4, ISO 4925 Class 6 Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Spetsifikatsioon DOT järgi: DOT 4+
• Kuivkeemispunkt (°C): 265
• Keemispunkt (°C): 180
• Spetsifikatsioon: FMVSS 116 DOT 4, SAE J 1703 / J 1704
• keem.omadus: sünteetiline
• Soovituslik vahetusintervall (aastad): 2
• Konteineri tüüp: Pudel
• Maht(liiter): 0,25
• jälgida süsteemi mahutavust:
• Jälgige sõidukitootja juhiseid:
• Kaal (kg): 0,28
• Kõrgus (mm): 50
• Laius (mm): 45
• Pikkus (mm): 70
• Soovituslik vahetusintervall (km): 40 000
• DIN/ISO: ISO 4925
• Tootja: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Kogus pakendis: 24
• Keemispunkt (°C): 180
• Spetsifikatsioon DOT järgi: DOT 5.1
• Kuivkeemispunkt (°C): 260
• Maht(liiter): 0,5
• Spetsifikatsioon: FMVSS 116 DOT 5.1, ISO 4925 Classes 4, SAE J 1703
• Kaal (kg): 0,296
• Hooldusinfot jälgida:
• Tootja: FEBI-UKLAD HAMULCOWY

DIN/ISO: ISO 4925 Class 3, ISO 4925 Class 4, ISO 4925 Class 5.1 Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Spetsifikatsioon DOT järgi: DOT 4
• Keemispunkt (°C): 160
• Kuivkeemispunkt (°C): 260
• Maht(liiter): 1
• Kaal (kg): 1,139
• Hooldusinfot jälgida:
• Tootja: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Spetsifikatsioon DOT järgi: DOT 4
• keem.omadus: sünteetiline
• Maht(liiter): 1
• Kuivkeemispunkt (°C): 245
• Konteineri tüüp: Pudel
• Kaal (kg): 1,15
• Tootja: VALEO

• Kogus pakendis: 24
• Keemispunkt (°C): 184
• Kuivkeemispunkt (°C): 274
• Spetsifikatsioon DOT järgi: DOT 5.1
• Maht(liiter): 0,5
• Kaal (kg): 0,296
• Hooldusinfot jälgida:
• Tootja: FEBI

DIN/ISO: ISO 4925 Class 3, ISO 4925 Class 4, ISO 4925 Class 5.1, ISO 4925 Class 6 Spetsifikatsioon: FMVSS 116 DOT 5.1, ISO 4925 Classes 4, SAE J 1703, ISO 4925 Classes 6 Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Keemispunkt (°C): 170
• Kuivkeemispunkt (°C): 265
• Spetsifikatsioon DOT järgi: DOT 4, DOT 3, DOT 4 LV
• Konteineri tüüp: Pudel
• Soovituslik vahetusintervall (aastad): 2
• Soovituslik vahetusintervall (km): 40 000
• Maht(liiter): 0,5
• Viskoossusklass SAE: J 1703 / J 1704
• Hooldusinfot jälgida:
• Tootja: VAICO

Hüdraulikavedeliku tootja soovitus: W TL 766-Z, VW 50 114, BMW QV 34 001, GM Europa GMW 3356, PSA STL S71 2114, Ford WSS-M6C65-A2 DIN/ISO: ISO 4925 Class 3, ISO 4925 Class 4, ISO 4925 Class 6 Üldine informatsioon: Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.

• Kuivkeemispunkt (°C): 260
• Keemispunkt (°C): 180
• Spetsifikatsioon DOT järgi: DOT 4
• DIN/ISO: ISO 4925
• Maht(liiter): 1
• Spetsifikatsioon: MB 331.0
• Kaal (kg): 1,139
• Hooldusinfot jälgida:
• Tootja: FEBI BILSTEIN
• Lisainfo: FE23930

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Keemispunkt (°C): 155
• Spetsifikatsioon DOT järgi: DOT 4
• Kuivkeemispunkt (°C): 260
• keem.omadus: sünteetiline
• Maht(liiter): 0,5
• Soovituslik vahetusintervall (aastad): 2
• jälgida süsteemi mahutavust:
• Jälgige sõidukitootja juhiseid:
• Kõrgus (mm): 174
• Konteineri tüüp: Pudel
• DIN/ISO: ISO 4925 Class 4, ISO 4925
• Laius (mm): 58
• Kaal (kg): 0,6, 0,858
• Spetsifikatsioon: FMVSS 116 DOT 4, SAE J 1703 F
• Pikkus (mm): 95
• Soovituslik vahetusintervall (km): 40 000
• Tootja: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Spetsifikatsioon DOT järgi: DOT 5.1
• keem.omadus: sünteetiline
• Maht(liiter): 1
• Kuivkeemispunkt (°C): 265
• Konteineri tüüp: Pudel
• Kaal (kg): 1,14
• Tootja: VALEO
• Lisainfo: VAL402408

• Spetsifikatsioon DOT järgi: DOT 4+
• keem.omadus: sünteetiline
• Maht(liiter): 1
• Kuivkeemispunkt (°C): 265
• Konteineri tüüp: Pudel
• Kaal (kg): 1,13
• Tootja: VALEO
• Nimetus: VA 402406

• Keemispunkt (°C): 170
• Spetsifikatsioon DOT järgi: DOT 4, DOT 4 LV
• Kuivkeemispunkt (°C): 265
• Maht(liiter): 1
• Kaal (kg): 1,064
• Hooldusinfot jälgida:
• Tootja: FEBI

DIN/ISO: ISO 4925 Class 3, ISO 4925 Class 4, ISO 4925 Class 6 Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Kogus pakendis: 12
• Keemispunkt (°C): 180
• Spetsifikatsioon DOT järgi: DOT 5.1
• Kuivkeemispunkt (°C): 260
• Maht(liiter): 1
• Spetsifikatsioon: FMVSS 116 DOT 5.1, ISO 4925 Classes 4, SAE J 1703
• Kaal (kg): 0,296
• Hooldusinfot jälgida:
• Tootja: FEBI

DIN/ISO: ISO 4925 Class 3, ISO 4925 Class 4, ISO 4925 Class 5.1 Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Kogus pakendis: 12
• Keemispunkt (°C): 184
• Spetsifikatsioon DOT järgi: DOT 5.1
• Kuivkeemispunkt (°C): 274
• Maht(liiter): 1
• Kaal (kg): 0,296
• Hooldusinfot jälgida:
• Tootja: FEBI

DIN/ISO: ISO 4925 Class 3, ISO 4925 Class 4, ISO 4925 Class 5.1, ISO 4925 Class 6 Spetsifikatsioon: FMVSS 116 DOT 5.1, ISO 4925 Classes 4, SAE J 1703, ISO 4925 Classes 6 Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Spetsifikatsioon DOT järgi: DOT 4+
• Kuivkeemispunkt (°C): 265
• Keemispunkt (°C): 180
• keem.omadus: sünteetiline
• Konteineri tüüp: Pudel
• Soovituslik vahetusintervall (aastad): 2
• Maht(liiter): 1
• Soovituslik vahetusintervall (km): 40 000
• Jälgige sõidukitootja juhiseid:
• jälgida süsteemi mahutavust:
• Pikkus (mm): 60
• Kaal (kg): 1,15, 1,4
• Kõrgus (mm): 225
• Laius (mm): 115
• DIN/ISO: ISO 4925
• Tootja: VAICO

Spetsifikatsioon: FMVSS 116 DOT 4, ISO 4925 Class 4, SAE J 1703 / J 1704, FMVSS 116 DOT 3 Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Kogus pakendis: 4
• Kuivkeemispunkt (°C): 260
• Keemispunkt (°C): 160
• Spetsifikatsioon DOT järgi: DOT 4
• Maht(liiter): 5
• Kaal (kg): 5,607
• Hooldusinfot jälgida:
• Tootja: FEBI BILSTEIN
• Lisainfo: 21754 FEBI

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Spetsifikatsioon DOT järgi: DOT 4
• keem.omadus: sünteetiline
• Maht(liiter): 5
• Kuivkeemispunkt (°C): 245
• Konteineri tüüp: Kanister
• Tootja: VALEO
• Nimetus: VA 402404

• Kogus pakendis: 4
• Keemispunkt (°C): 180
• Spetsifikatsioon DOT järgi: DOT 4
• Kuivkeemispunkt (°C): 260
• DIN/ISO: ISO 4925
• Maht(liiter): 5
• Spetsifikatsioon: MB 331.0
• Kaal (kg): 5,607
• Hooldusinfot jälgida:
• Tootja: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Kogus pakendis: 4
• Spetsifikatsioon DOT järgi: DOT 4, DOT 4 LV
• Keemispunkt (°C): 170
• Kuivkeemispunkt (°C): 265
• Maht(liiter): 5
• Kaal (kg): 5,32
• Hooldusinfot jälgida:
• Tootja: FEBI-UKLAD HAMULCOWY

DIN/ISO: ISO 4925 Class 3, ISO 4925 Class 4, ISO 4925 Class 6 Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Spetsifikatsioon DOT järgi: DOT 4+
• Kuivkeemispunkt (°C): 265
• Keemispunkt (°C): 180
• keem.omadus: sünteetiline
• Maht(liiter): 5
• Soovituslik vahetusintervall (aastad): 2
• Konteineri tüüp: Kanister
• Soovituslik vahetusintervall (km): 40 000
• Jälgige sõidukitootja juhiseid:
• jälgida süsteemi mahutavust:
• Laius (mm): 115
• Pikkus (mm): 300
• Kõrgus (mm): 230
• Kaal (kg): 4,72
• DIN/ISO: ISO 4925
• Tootja: VAICO

Spetsifikatsioon: ISO 4925 Class 4, SAE J 1703 / J 1704, FMVSS 116 DOT 3, FMVSS 116 DOT 4 Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Kogus pakendis: 4
• Keemispunkt (°C): 180
• Spetsifikatsioon DOT järgi: DOT 5.1
• Kuivkeemispunkt (°C): 260
• Maht(liiter): 5
• Spetsifikatsioon: FMVSS 116 DOT 5.1, ISO 4925 Classes 4, SAE J 1703
• Kaal (kg): 0,296
• Hooldusinfot jälgida:
• Tootja: FEBI

DIN/ISO: ISO 4925 Class 3, ISO 4925 Class 4, ISO 4925 Class 5.1 Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Spetsifikatsioon DOT järgi: DOT 4

Spetsifikatsioon: BMW/Mini 83 13 0 139, FMVSS 116 DOT 4, ISO 4925 class 6, Saab 93165410, SAE J1704, VW 501.14