• Weight [kg]: 0.01
• Warranty: 3 years warranty
• Tootja: SKV GERMANY
• Nimetus: CE 28SKV902

• Fitting Position: Front
• Sensor Type: Ultrasonic Sensor
• Colour: black
• Tootja: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Supplementary Article/Info 2: with adhesive film, Holder may need adaptation
• Tootja: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Mounting Type: Glue on
• Vehicle Equipment: for vehicles with parking distance control
• Version: V99-72-0001
• Weight [kg]: 0.005
• Tootja: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: both sides, Rear, Front, outer, inner, Centre
• Sensor Type: Ultrasonic Sensor
• Connector Shape: oval
• Shape: angled
• Fabrication Number: EPDC-ME-004
• Tootja: NTY
• Nimetus: NTY EPDC-ME-004

• Fitting Position: both sides, inner, Front, outer, Rear, Centre
• Fabrication Number: EPDC-ME-003

• Fitting Position: both sides, Rear, inner, Front, Centre
• Supplementary Article/Info 2: for retrofitted equipment
• Fabrication Number: EPDC-ME-008
• Tootja: NTY

• Fitting Position: Front, outer, inner, Centre
• Colour: black
• Sensor Type: Ultrasonic Sensor
• Socket colour: black
• Fabrication Number: EPDC-ME-001
• Tootja: NTY

• Fitting Position: Front, Rear
• Number of pins: 3
• Sensor Type: Ultrasonic Sensor
• Colour: black
• Connector Shape: oval

• Ehitusaasta alates: 05.2008
• Ehitusaasta kuni: 04.2009
• Fitting Position: Front and Rear
• Voltage [V]: 12
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Number of pins: 3
• Weight [kg]: 0.03
• Operating Mode: Electric
• Warranty: 3 years warranty
• Tootja: SKV GERMANY
• Nimetus: CE 28SKV018

• Ehitusaasta kuni: 04.2009
• Plokieraldus:
• Fitting Position: Front, Rear
• Sensor Type: Ultrasonic Sensor
• Surface: Blank
• Nimetus: SENSOR, PARKIMISABI
• Tootja: MAX

• Fitting Position: Front
• Colour: black
• Supplementary Article/Supplementary Info: with seal
• Nimetus: MM SDP050
• Tootja: MAGNETI MARELLI

• Fitting Position: Front
• Voltage [V]: 12
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Number of pins: 3
• Weight [kg]: 0.02
• Operating Mode: Electric
• Warranty: 3 years warranty
• Nimetus: CE 28SKV019
• Tootja: ESEN SKV

• Mounting Type: Glued
• Height 1 [mm]: 16.5
• Height 2 [mm]: 26.5
• Tootja: MEAT&DORIA

• Installatsiooni pool: vasakul, paremal, väljas
• SA koodi jaoks: 220
• Fitting Position: Front
• Sensor Type: Ultrasonic Sensor
• Colour: black
• Shape: angled
• Supplementary Article/Supplementary Info: with seal
• Surface: primed
• Number of connectors: 3
• Chemical Properties: Paintable, Over-paintable
• Nimetus: Parking sensor
• Kvaliteediklass: PJ

Lisainfo: (kvaliteediklass PJ)

• Installatsiooni pool: sees, vasakul, paremal, väljas
• Ehitusaasta kuni: 06.2009
• Fitting Position: Rear, Front
• Sensor Type: Ultrasonic Sensor
• Length [mm]: 46
• Length from [mm]: 46
• Width [mm]: 27
• Height [mm]: 44.8
• Colour: black
• Shape: angled
• Number of connectors: 3
• Chemical Properties: Paintable
• Nimetus: Parking sensor
• Kvaliteediklass: PJ

Lisainfo: (kvaliteediklass PJ)

• Fitting Position: Rear, Front
• Sensor Type: Ultrasonic Sensor
• Length [mm]: 50
• Length from [mm]: 50.4
• Width [mm]: 29.6
• Height [mm]: 27.8
• Colour: black
• Shape: angled
• Supplementary Article/Supplementary Info: with seal
• Surface: primed
• Number of connectors: 3
• Chemical Properties: Paintable
• Nimetus: Parking sensor
• Kvaliteediklass: PJ

Lisainfo: (kvaliteediklass PJ)

• Fitting Position: Front
• Number of pins: 3
• Colour: black

• for OE number: 212 542 0118
• Fitting Position: Front, Rear
• Nimetus: SENSOR, PARKIMISABI
• Tootja: MAX

• Sensor Type: Ultrasonic Sensor
• Fitting Position: Front, Rear
• Colour: black
• Number of pins: 3
• Connector Shape: oval
• Tootja: FAST

• Fitting Position: Rear, Front
• Length [mm]: 50
• Colour: black
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 3
• Chemical Properties: Paintable
• Housing Colour: black
• Tootja: ERA

• Fitting Position: Rear
• Number of pins: 3

• Installatsiooni pool: sees, vasakul, paremal, ees
• Hulk: 4
• SA koodi jaoks: 220
• Supplementary Article/Supplementary Info: with gaskets/seals
• Diameter [mm]: 15.38
• Chemical Properties: Paintable
• Nimetus: Sensor, parkimisabi
• Tootja: TRI

• Installatsiooni pool: taga
• Kerenumber (VIN) kuni: J384822
• tootmise kuupäev kuni: 27.05.2008
• SA koodi jaoks: 220
• vajaminev tükihulk: 4
• Sensor Type: Ultrasonic Sensor
• Chemical Properties: Paintable
• Number of pins: 3
• Connector Shape: angled
• Tootja: METZGER

• Installatsiooni pool: ees, sees, taga
• Plokieraldus:
• Kerenumber (VIN) alates: J297126
• Number of connectors: 3
• Chemical Properties: Paintable
• Quality: IAM
• Tootja: METZGER

• Fitting Position: Rear, Front
• Length [mm]: 50.4
• Width [mm]: 29.6
• Height [mm]: 27.8
• Colour: black
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Supplementary Article/Supplementary Info: with seal
• Surface: primed
• Number of connectors: 3
• Chemical Properties: Paintable
• Housing Colour: black
• See accessories list for additionally required parts:
• Article number of recommended accessories: V99-72-0001
• Weight [kg]: 0.029
• Tootja: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Ehitusaasta kuni: 04.2009
• Installatsiooni pool: ees, kahepoolne, taga
• Plokieraldus:
• Sensor Type: Ultrasonic Sensor
• Surface: Blank
• Nimetus: SENSOR, PARKIMISABI
• Tootja: BOS

• vajaminev tükihulk: 2
• Installatsiooni pool: kahepoolne, väljas, ees
• SA koodi jaoks: 220
• Number of pins: 3
• Chemical Properties: Paintable
• Mounting Type: Plugged
• Socket colour: black
• Shape: angled
• Supplementary Article/Supplementary Info: with fastening ring
• Assy./disassy. by qualified personnel required!:
• Nimetus: HE 6PX358141371
• Tootja: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• for OE number: 212 542 0118
• Fitting Position: Front and Rear
• Nimetus: SENSOR, PARKIMISABI
• Tootja: TRU

• vajaminev tükihulk: 4
• Installatsiooni pool: kahepoolne, sees, ees
• SA koodi jaoks: 220
• Number of pins: 3
• Chemical Properties: Paintable
• Mounting Type: Plugged
• Socket colour: black
• Shape: angled
• Supplementary Article/Supplementary Info: with fastening ring
• Assy./disassy. by qualified personnel required!:
• Nimetus: HE 6PX358141091
• Tootja: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• vajaminev tükihulk: 2
• Installatsiooni pool: kahepoolne, väljas, ees
• SA koodi jaoks: 220, 235
• Plokieraldus:
• Sõidukivarustus: sõidukitele poolautomaatse parkimisabi süsteemiga
• Chemical Properties: Over-paintable
• Colour: black
• Number of pins: 3
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Nimetus: Sensor, parkimisabi
• Tootja: MEY

• Installatsiooni pool: ees, sees, taga
• Kerenumber (VIN) alates: J297126
• Fitting Position: Bumper
• Number of pins: 3
• Surface: primed
• Sensor Type: Ultrasonic Sensor
• Tootja: AIC

Installation Information: Attention, test the sensor for function before painting. General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Ehitusaasta kuni: 06.2009
• Installatsiooni pool: ees ja taga, väljas, sees, vasakul, paremal
• Sensor Type: Ultrasonic Sensor
• Fitting Position: Front, Rear
• Chemical Properties: Paintable
• Length [mm]: 42
• Width [mm]: 23.15
• Height [mm]: 46
• Number of pins: 3
• Diameter [mm]: 16.6
• Weight [kg]: 0.038
• Nimetus: Sensor, parkimisabi
• Tootja: VAL

• Supplementary Article/Info 2: with sensor
• Number of sensors: 4
• Fitting Position: Front, Rear
• Colour: black, Mat
• Sensor Type: Ultrasonic Sensor
• Vehicle Equipment: for vehicles with trailer hitch
• Gauge: without Display
• Mounting Type: mounting
• Rated Voltage [V]: 12
• Range from [m]: 0.1
• Range to [m]: 1.7
• for vehicle width to [m]: 2.2
• Height adjustment from [cm]: 40
• Height adjustment to [cm]: 65
• Parking distance control sensor reflection angle: Sensor reflection angle: 0 to 5 degrees
• Parameter Programming, PPS (parking distance control): with parameter programming PPS
• Mounting Time from (in hours): 1.5
• DIN/ISO: 17386
• Chemical Properties: Paintable
• Weight [kg]: 1.2
• Nimetus: PARKIMISABI
• Tootja: VAL
• Lisainfo: VAL632200

Parking distance control activation: with acoustic warn function, with radio muting, Activation optional through switch, Activation through reverse gear Trailer Hitch: with automatic parking distance control deactivation General Information: Activation of the front sensors through the main brake

• Supplementary Article/Info 2: with sensor
• Number of sensors: 4
• Fitting Position: Front, Rear
• Colour: black, Mat
• Sensor Type: Ultrasonic Sensor
• Vehicle Equipment: for vehicles with trailer hitch
• Gauge: without Display
• Mounting Type: Plugged
• Rated Voltage [V]: 12
• Range from [m]: 0.1
• Range to [m]: 1.7
• for vehicle width to [m]: 2.2
• Height adjustment from [cm]: 40
• Height adjustment to [cm]: 65
• Parking distance control sensor reflection angle: Sensor reflection angle: 0 to 5 degrees
• Parameter Programming, PPS (parking distance control): with parameter programming PPS
• Mounting Time from (in hours): 1.5
• DIN/ISO: 17386
• Chemical Properties: Paintable
• Weight [kg]: 1.2
• Tootja: VALEO

Parking distance control activation: with acoustic warn function, with radio muting, Activation optional through switch, Activation through reverse gear Trailer Hitch: with automatic parking distance control deactivation

• Supplementary Article/Info 2: with sensor
• Number of sensors: 4
• Fitting Position: Front, Rear
• Colour: black, Mat
• Sensor Type: Ultrasonic Sensor
• Vehicle Equipment: for vehicles with trailer hitch
• Gauge: with LCD colour display
• Mounting Type: mounting
• Rated Voltage [V]: 12
• Range from [m]: 0.1
• Range to [m]: 1.7
• for vehicle width to [m]: 2.2
• Height adjustment from [cm]: 40
• Height adjustment to [cm]: 65
• Parking distance control sensor reflection angle: Sensor reflection angle: 0 to 5 degrees
• Parameter Programming, PPS (parking distance control): with parameter programming PPS
• Mounting Time from (in hours): 1.5
• DIN/ISO: 17386
• Chemical Properties: Paintable
• Weight [kg]: 1.22
• Tootja: VALEO

Parking distance control activation: with acoustic warn function, with radio muting, Activation optional through switch, Activation through reverse gear Trailer Hitch: with automatic parking distance control deactivation General Information: Activation of the front sensors through the main brake

• Supplementary Article/Info 2: with sensor
• Number of sensors: 8
• Fitting Position: Front and Rear
• Colour: black, Mat
• Sensor Type: Ultrasonic Sensor
• Vehicle Equipment: for vehicles with trailer hitch
• Gauge: with LCD colour display
• Mounting Type: mounting
• Rated Voltage [V]: 12
• Range from [m]: 0.1
• Range to [m]: 1.7
• for vehicle width to [m]: 2.2
• Height adjustment from [cm]: 40
• Height adjustment to [cm]: 65
• Parking distance control sensor reflection angle: Sensor reflection angle: 0 to 5 degrees
• Parameter Programming, PPS (parking distance control): with parameter programming PPS
• Trailer Hitch: without parking distance control deactivation
• Mounting Time from (in hours): 3
• DIN/ISO: 17386
• Chemical Properties: Paintable
• Weight [kg]: 2.08
• Nimetus: PARKIMISABI
• Tootja: VAL
• Lisainfo: VAL632202

Parking distance control activation: with acoustic warn function, with radio muting, Activation optional through switch, Activation through reverse gear General Information: Activation of the front sensors through the main brake