Tootekategooriad
Filter Pidurid Šassii Roolimine Jahutus/kliima Elektrisüsteem Jõuülekanne Väljalaskesüsteem Kere Süüte-/eelsüütesüsteem Mootor Klaasid/klaasipuhastus Valgustus Kütusesüsteemi seadmed Kabiinivarustus HooldusToode
Kirjeldus
Laoseis
Hind
(km-ga)


- Installatsiooni pool: Esisild
- Kerenumber (VIN) alates: 203608
- Kogus pakendis: 2
-
Test Mark: ECE-
R90 - Height [mm]: 63.5
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 12.5
- Outer Diameter [mm]: 278
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 80
- Tootja: METELLI UKL.HAMULCOWY
-
Lisainfo: 23-
0046



- Outer Diameter [mm]: 279
- Brake Disc Thickness [mm]: 10
- Brake Disc Type: solid
- Fitting Position: Rear Axle
- Height [mm]: 71.8
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 67
-
Supplementary Article/Info 2: without wheel hub,
without wheel studs - Minimum thickness [mm]: 8.3
- Nimetus: PIDURIKETAS
- Tootja: MAX



- Outer Diameter [mm]: 278
- Brake Disc Thickness [mm]: 12.6
- Brake Disc Type: solid
- Fitting Position: Front Axle
- Height [mm]: 63.5
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 80
-
Supplementary Article/Info 2: without wheel hub,
without wheel studs - Minimum thickness [mm]: 10.6
- Nimetus: PIDURIKETAS
- Tootja: MAX








- Fitting Position: Rear Axle
- Brake Disc Type: solid
- Outer Diameter [mm]: 279
- Brake Disc Thickness [mm]: 10
- Number of Holes: 5
- Surface: Coated
- Lisainfo: Brake Disc



- Kogus pakendis: 2
- Fitting Position: Rear Axle
- Rim Hole Number: 5
- Height [mm]: 71.7
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8.3
- Outer Diameter [mm]: 279
- Centering Diameter [mm]: 67
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Hub Height [mm]: 62
- Tootja: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.




- Brake Disc Thickness [mm]: 10
- Rim Hole Number: 5
- Number of mounting bores: 2
- Thickness [mm]: 69.5
- Outer Diameter [mm]: 279
- Bolt Hole Circle Ø [mm]: 112
- Surface: Coated
- Brake Disc Type: solid
- Fitting Position: Rear Axle
- Minimum thickness [mm]: 8.3
- Centering Diameter [mm]: 67
- Weight [kg]: 4.27
- Observe service information:
- Tootja: FEBI BILSTEIN
- Kogus pakendis: 2
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.




- Kerenumber (VIN) kuni: ***********089801
- Brake Disc Thickness [mm]: 12.7
- Rim Hole Number: 5
- Number of mounting bores: 5
- Thickness [mm]: 63.3
- Outer Diameter [mm]: 273
- Bolt Hole Circle Ø [mm]: 112
- Surface: Coated
- Brake Disc Type: solid
- Fitting Position: Front Axle
- Minimum thickness [mm]: 10.6
- Centering Diameter [mm]: 69.6
- Weight [kg]: 5.27
- Observe service information:
- Tootja: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.


- Installatsiooni pool: Esisild
- Ehitusaasta kuni: 07.1972
- Kogus pakendis: 2
- Brake Disc Type: solid
- Number of Holes: 5
-
Test Mark: E1 90R-
02C0241/ 0160 - Surface: Oiled
- Outer Diameter [mm]: 279
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8.3
- Centering Diameter [mm]: 67
- Height [mm]: 69.5
- Tootja: DELPHI LOCKHEED HAMULCE
- Nimetus: DE BG2240
- Lisainfo: DELBG2240



- Ehitusaasta alates: 08.1972
- Fitting Position: Front Axle
- Outer Diameter [mm]: 273
- Height [mm]: 63.3
- Brake Disc Thickness [mm]: 12.6
- Centering Diameter [mm]: 80
- Bolt Hole Circle Ø [mm]: 112
- Wheel Bolt Bore Diameter [mm]: 15
- Number of Holes: 5
- Brake Disc Type: solid
- Required quantity: 2
- Minimum thickness [mm]: 10.6
- Nimetus: Piduriketas
- Tootja: MAX


- Installatsiooni pool: Tagasild
- Kogus pakendis: 2
- Outer Diameter [mm]: 279
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8.3
- Height [mm]: 72
- Rim Hole Number: 5
- Brake Disc Type: solid
- Centering Diameter [mm]: 67
- Bolt Hole Circle Ø [mm]: 112
- Surface: Coated
- Hub Diameter [mm]: 168
- Weight [kg]: 4.28
-
Installation Information: Important:
Observe Fitting Instructions - Tootja: ABS




- Brake Disc Thickness [mm]: 10
- Rim Hole Number: 5
- Number of mounting bores: 2
- Thickness [mm]: 69.5
- Outer Diameter [mm]: 279
- Bolt Hole Circle Ø [mm]: 112
- Surface: Coated
- Brake Disc Type: solid
- Fitting Position: Rear Axle
- Minimum thickness [mm]: 8.3
- Centering Diameter [mm]: 67
- Weight [kg]: 4.27
- Nimetus: SW 10 90 8506
- Tootja: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.


- Brake Disc Thickness [mm]: 12.7
- Rim Hole Number: 5
- Number of mounting bores: 5
- Thickness [mm]: 63.7
- Outer Diameter [mm]: 278
- Bolt Hole Circle Ø [mm]: 112
- Surface: Coated
- Brake Disc Type: solid
- Fitting Position: Front Axle
- Minimum thickness [mm]: 10.6
- Centering Diameter [mm]: 80
- Weight [kg]: 5.12
- Observe service information:
- Tootja: FEBI HAMULCE
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.



- Kerenumber (VIN) kuni: ***********089801
- Brake Disc Thickness [mm]: 12.7
- Rim Hole Number: 5
- Number of mounting bores: 5
- Thickness [mm]: 63
- Outer Diameter [mm]: 273
- Bolt Hole Circle Ø [mm]: 112
- Surface: Coated
- Brake Disc Type: solid
- Fitting Position: Front Axle
- Minimum thickness [mm]: 10.6
- Centering Diameter [mm]: 69.6
- Weight [kg]: 5.27
- Observe service information:
- Tootja: BLUE PRINT HAMULCE
- Kogus pakendis: 2
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.


- Ehitusaasta kuni: 10.1976
- Fitting Position: Rear Axle
- Outer Diameter [mm]: 279
- Height [mm]: 72
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8.3
- Centering Diameter [mm]: 67
- Bolt Hole Circle Ø [mm]: 112
- Wheel Bolt Bore Diameter [mm]: 15
- Number of Holes: 5
- Brake Disc Type: solid
- Required quantity: 2
- Nimetus: PIDURIKETAS
- Tootja: MEY


- Brake Disc Thickness [mm]: 12.7
- Rim Hole Number: 5
- Number of mounting bores: 5
- Thickness [mm]: 64
- Outer Diameter [mm]: 278
- Bolt Hole Circle Ø [mm]: 112
- Surface: Coated
- Brake Disc Type: solid
- Fitting Position: Front Axle
- Minimum thickness [mm]: 10.6
- Centering Diameter [mm]: 80
- Weight [kg]: 5.12
- Observe service information:
- Tootja: BLUEPRINT
- Kogus pakendis: 2
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.


- Kerenumber (VIN) alates: ***********089802
- Kerenumber (VIN) kuni: ***********203606
- Brake Disc Thickness [mm]: 12.7
- Rim Hole Number: 5
- Thickness [mm]: 63.4
- Outer Diameter [mm]: 273
- Bolt Hole Circle Ø [mm]: 112
- Surface: Coated
- Brake Disc Type: solid
- Fitting Position: Front Axle
- Minimum thickness [mm]: 10.6
- Centering Diameter [mm]: 80
- Weight [kg]: 5.24
- Observe service information:
- Tootja: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.



- Installatsiooni pool: Tagasild
- Kogus pakendis: 2
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10
- Number of Holes: 5
-
Supplementary Article/Info 2: with bolts/
screws - Height [mm]: 70
- Centering Diameter [mm]: 67
- Outer Diameter [mm]: 279
- Minimum thickness [mm]: 8.3
- Tightening Torque [Nm]: 120
- Tootja: BREMBO
- Nimetus: BR 08.1395.40



- Installatsiooni pool: Esisild
- Ehitusaasta alates: 01.1975
- Kogus pakendis: 2
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 12.6
- Number of Holes: 5
- Height [mm]: 63
- Centering Diameter [mm]: 80
- Outer Diameter [mm]: 278
- Minimum thickness [mm]: 10.6
- Tightening Torque [Nm]: 120
- Nimetus: BR 08.3189.20
- Tootja: BREMBO






























- Installatsiooni pool: Tagasild
- Outer Diameter [mm]: 279
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8.3
- Height [mm]: 72
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Type: solid
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Surface: Oiled
-
Supplementary Article/Info 2: with bolts/
screws -
fulfils ECE norm: ECE-
R90 - Bore Diameter up to [mm]: 15.5
- Tootja: BOSCH UK£ADY HAMULCOWE
- Kogus pakendis: 2


- Installatsiooni pool: Tagasild
- Kogus pakendis: 2
- Brake Disc Type: solid
- Outer Diameter [mm]: 279
- Brake Disc Thickness [mm]: 10
- Height [mm]: 71.8
- Minimum thickness [mm]: 8.3
- Inner Diameter [mm]: 160
- Bolt Hole Circle Ø [mm]: 112
- Centering Diameter [mm]: 67
-
Hole Arrangement/Number: 05/
07 - Wheel Bolt Bore Diameter [mm]: 15.3
- Packaging length [cm]: 29.3
- Packaging width [cm]: 29.3
- Packaging height [cm]: 16.5
- Weight [kg]: 4.3
- Nimetus: PIDURIKETAS
- Tootja: TEX
Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs


- Installatsiooni pool: Esisild
- Kerenumber (VIN) kuni: 089801
- Outer Diameter [mm]: 273
- Brake Disc Thickness [mm]: 12.6
- Minimum thickness [mm]: 11
- Height [mm]: 63.5
- Bolt Hole Circle Ø [mm]: 112
- Brake Disc Type: solid
- Centering Diameter [mm]: 69.6
- Number of Holes: 5
- Surface: Oiled
-
fulfils ECE norm: ECE-
R90 - Bore Diameter up to [mm]: 15
- Tootja: BOSCH
- Kogus pakendis: 2






- Kerenumber (VIN) alates: 089802
- Kerenumber (VIN) kuni: 203606
- Fitting Position: Front Axle
- Brake Disc Type: solid
- Outer Diameter [mm]: 273
- Brake Disc Thickness [mm]: 12.6
- Number of Holes: 5
- Surface: Coated
- Tootja: JP GROUP
- Lisainfo: Brake Disc



























- Ehitusaasta kuni: 10.1976
- Kerenumber (VIN) alates: 203607
- Installatsiooni pool: Esisild
- Kogus pakendis: 2
- Outer Diameter [mm]: 278
- Brake Disc Thickness [mm]: 12.6
- Minimum thickness [mm]: 10.6
- Brake Disc Type: solid
- Number of Holes: 5
- Surface: Coated
- MAPP code available:
- Bolt Hole Circle Ø [mm]: 112
- Height [mm]: 63.3
- Centering Diameter [mm]: 80
- Inner Diameter [mm]: 127.5
- Bore Diameter [mm]: 15.2
-
Test Mark: E1 90R-
02C0165/ 0505 - Nimetus: PIDURIKETAS
- Tootja: ATE



- Installatsiooni pool: Tagasild
- Kogus pakendis: 2
- Brake Disc Type: solid
- Outer Diameter [mm]: 279
- Brake Disc Thickness [mm]: 10
- Minimum thickness [mm]: 8.3
- Centering Diameter [mm]: 67
- Height [mm]: 71.7
- Number of Holes: 5
- Thread Size: 15
- Bolt Hole Circle Ø [mm]: 112
- Drum diameter [mm]: 160
- Colour: black
- Surface: painted
-
Test Mark: E190R-
02C0204/ 0525 - Tootja: TRW
SVHC: No information available, please contact the manufacturer!



























- Kerenumber (VIN) kuni: 089801
- Installatsiooni pool: Esisild
- Kogus pakendis: 2
- Outer Diameter [mm]: 273
- Brake Disc Thickness [mm]: 12.6
- Minimum thickness [mm]: 11
- Brake Disc Type: solid
- Surface: Coated
- Number of Holes: 5
- MAPP code available:
- Bolt Hole Circle Ø [mm]: 112
- Height [mm]: 63.3
- Centering Diameter [mm]: 69.5
- Inner Diameter [mm]: 127.5
- Bore Diameter [mm]: 15
-
Test Mark: E1 90R-
02C0165/ 0615 - Nimetus: PIDURIKETAS
- Tootja: ATE


- Installatsiooni pool: Tagasild
- Kogus pakendis: 2
-
Kontrolltähistus: E1 90R-
02C0241/ 0160 - Piduriketta liik: täis
- Aukude arv: 5
-
Piirangutega toode/piirangu info 2: ilma ABS-
anduriteta, ilma rattalaagrita - Töötlus: töötlemata
- Välisläbimõõt [mm]: 279
- Pidurikettajämedus [mm]: 10
- Miinimumjämedus (mm): 8
- Tsentri läbimõõt (mm): 67
- Kõrgus (mm): 70
- Kvaliteediklass: PJ
- Nimetus: Brake discs
Lisainfo: "Tootja: SRL
(kvaliteediklass: PJ)"



- Kerenumber (VIN) alates: 089802
- Kerenumber (VIN) kuni: 203606
- Installatsiooni pool: Esisild
- Kogus pakendis: 2
- Outer Diameter [mm]: 273.5
- Brake Disc Thickness [mm]: 12.6
- Minimum thickness [mm]: 11
- Brake Disc Type: solid
- Surface: Coated
- Number of Holes: 5
- MAPP code available:
- Bolt Hole Circle Ø [mm]: 112
- Height [mm]: 63.3
- Centering Diameter [mm]: 80
- Inner Diameter [mm]: 127.5
- Bore Diameter [mm]: 15
-
Test Mark: E1 90R-
02C0165/ 0614 - Nimetus: Piduriketas
- Tootja: ATE