• Pikkus (mm): 18
• Välisläbimõõt [mm]: 30
• Väliskeerme mõõde: M24 x 1,5
• Keermepikkus (mm): 12
• Kvaliteet/klass: 5.8
• Võtmekaugus: 12
• Kruvipea-/Mutriprofiil: sisekuuskant
• Materjal: Metall
• Pealispind: tsingitud
• Kruvipikkus kruvipea all [mm]: 14
• Kaal (kg): 0,049
• jälgida mõõtu:
• Lisainfo: 10 90 5410 SWA

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pikkus (mm): 17
• Välisläbimõõt [mm]: 32
• Väliskeerme mõõde: M26 x 1,5
• Keermepikkus (mm): 12
• Kvaliteet/klass: 6.8
• Võtmekaugus: 15
• Kruvipea-/Mutriprofiil: sisekuuskant
• Materjal: Metall
• Pealispind: tsingitud
• Kruvipikkus kruvipea all [mm]: 14
• Kaal (kg): 0,064
• Piirangutega toode/piirangu info 2: ilma rõngastihendita
• Tootja: SWAG
• Lisainfo: 10 90 3013 SWA

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Jämedus/Tugevus (mm): 1,5
• Siseläbimõõt [mm]: 12
• Välisläbimõõt [mm]: 17
• DIN/ISO: 7603
• Materjal: Vask
• Kuju: A-kuju
• Kaal (kg): 0,001
• Nimetus: RONGASTIHEND, OLI ŽRAVOOLUKRUVI
• Tootja: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Materjal: Vask
• Siseläbimõõt [mm]: 12,5
• Jämedus/Tugevus (mm): 1,5
• Välisläbimõõt [mm]: 17
• Kaal (kg): 0,001
• Installatsiooni pool: Õlivann
• Tootja: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Siseläbimõõt [mm]: 12
• Välisläbimõõt [mm]: 17
• Jämedus/Tugevus (mm): 1,5
• Materjal: Vask
• Kuju: A-kuju
• DIN/ISO: 7603
• alternatiivne remondikomplekt: 017.736, 505.550, 505.540
• Tootja: ELRING

• Mootorikood: OM 617.912
• Materjal: Vask
• Jämedus/Tugevus (mm): 1,5
• Siseläbimõõt [mm]: 12
• Välisläbimõõt [mm]: 17
• Kuju: A-kuju
• Tootja: REINZ

• Materjal: Vask
• Siseläbimõõt [mm]: 14
• Jämedus/Tugevus (mm): 1,5
• Välisläbimõõt [mm]: 20
• Kaal (kg): 0,007
• Installatsiooni pool: Õlivann
• Tootja: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Jämedus/Tugevus (mm): 1,5
• Siseläbimõõt [mm]: 14
• Välisläbimõõt [mm]: 20
• DIN/ISO: 7603 A/CU
• Materjal: Vask
• Kaal (kg): 0,002
• Hooldusinfot jälgida:
• Tootja: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Jämedus/Tugevus (mm): 1,5
• Siseläbimõõt [mm]: 14
• Välisläbimõõt [mm]: 20
• DIN/ISO: 7603 A/CU
• Materjal: Vask
• Kaal (kg): 0,002
• Nimetus: RONGASTIHEND, OLI ŽRAVOOLUKRUVI
• Tootja: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Välisläbimõõt [mm]: 20
• Siseläbimõõt [mm]: 14
• Tootja: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Mootorikood: OM 617.912
• Jämedus/Tugevus (mm): 1,5
• Siseläbimõõt [mm]: 12
• Välisläbimõõt [mm]: 16
• Nimetus: RONGASTIHEND, OLI ŽRAVOOLUKRUVI
• Tootja: AJU

• Jämedus/Tugevus (mm): 1,5
• Siseläbimõõt [mm]: 26
• Välisläbimõõt [mm]: 32
• DIN/ISO: 7603
• Materjal: Vask
• Kaal (kg): 0,003
• Nimetus: RONGASTIHEND, OLI ŽRAVOOLUKRUVI
• Tootja: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Jämedus/Tugevus (mm): 1,5
• Siseläbimõõt [mm]: 26
• Välisläbimõõt [mm]: 32
• DIN/ISO: 7603
• Materjal: Vask
• Kaal (kg): 0,003
• Tootja: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pikkus (mm): 12
• Kaal (kg): 0,02
• Keermemõõt: M12 x 1,5
• Kaal (g): 20
• Tootja: METALCAUCHO

• Pikkus (mm): 21
• Väliskeerme mõõde: M12 x 1,5
• Keermepikkus (mm): 12
• Võtmekaugus: 13
• Kruvipea-/Mutriprofiil: Väliskuuskant
• Pealispind: õlitatud
• Kaal (kg): 0,02
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Nimetus: SULGURKRUVI, OLIVANN
• Tootja: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Välisläbimõõt [mm]: 20
• Jämedus/Tugevus (mm): 2
• Materjal: Vask
• Siseläbimõõt [mm]: 14
• Kaal (kg): 0,001
• Installatsiooni pool: Õlivann
• Tootja: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• OE-numbri jaoks: 002 997 3430 cpl.1
• Keermemõõt: M12 x 1,5
• Tootja: TRUCKTEC

• Pikkus (mm): 21
• Välisläbimõõt [mm]: 17
• Väliskeerme mõõde: M12 x 1,5
• Keermepikkus (mm): 8
• Võtmekaugus: 13
• Kruvipea-/Mutriprofiil: Väliskuuskant
• DIN/ISO: 910
• Materjal: Metall
• Pealispind: õlitatud
• Kruvipikkus kruvipea all [mm]: 12
• Kaal (kg): 0,02
• Piirangutega toode/piirangu info 2: ilma rõngastihendita
• Tootja: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pikkus (mm): 21
• Välisläbimõõt [mm]: 17
• Väliskeerme mõõde: M12 x 1,5
• Keermepikkus (mm): 8
• Võtmekaugus: 13
• Kruvipea-/Mutriprofiil: Väliskuuskant
• DIN/ISO: 910
• Materjal: Metall
• Pealispind: õlitatud
• Kruvipikkus kruvipea all [mm]: 12
• Kaal (kg): 0,02
• Piirangutega toode/piirangu info 2: ilma rõngastihendita
• Tootja: SWAG
• Lisainfo: 99 90 5961 SWA

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Keermemõõt: M12x1,5
• Pikkus (mm): 12
• lisaks vajatav toode (tootekood): 310.980.100, 397.980.100
• Nimetus: SULGURKRUVI, OLIVANN
• Tootja: FIS

• Pikkus (mm): 18
• Välisläbimõõt [mm]: 30
• Väliskeerme mõõde: M24 x 1,5
• Keermepikkus (mm): 12
• Kvaliteet/klass: 5.8
• Võtmekaugus: 12
• Kruvipea-/Mutriprofiil: sisekuuskant
• Materjal: Metall
• Pealispind: tsingitud
• Kruvipikkus kruvipea all [mm]: 14
• Kaal (kg): 0,049
• jälgida mõõtu:
• Tootja: FEBI

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Keermemõõt: M12x1,5x12
• Kruvipea-/Mutriprofiil: Väliskuuskant
• Võtmekaugus: 13 mm
• alternatiivne remondikomplekt: 878.020
• Piirangutega toode/piirangu info 2: ilma rõngastihendita
• Nimetus: Sulgurkruvi, olivann
• Tootja: ELR

• Siseläbimõõt [mm]: 12
• Välisläbimõõt [mm]: 17
• Jämedus/Tugevus (mm): 1,5
• Kuju: A-kuju
• Materjal: Vask
• valikuliselt:
• Nimetus: Rongastihend
• Tootja: FIS

• Keermemõõt: M12x1,5x12
• Kruvipea-/Mutriprofiil: Väliskuuskant
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Nimetus: Sulgurkruvi, olivann
• Tootja: ELR

• Pikkus (mm): 14
• Kruvipea-/Mutriprofiil: sisekuuskant
• Piirangutega toode/piirangu info 2: ilma rõngastihendita
• Tootja: FAST

• Keermemõõt: M12x1,5
• Pikkus (mm): 12
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• valikuliselt:

• Pikkus (mm): 21
• Keermemõõt: M 12 x 1,50 x 12
• Võtmekaugus: 13
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Konteineri tüüp: Blisterpack
• Nimetus: COU 220118S
• Tootja: CORTECO

• Keermemõõt: M24x1,5
• Pikkus (mm): 13
• Kruvipea-/Mutriprofiil: sisekuuskant
• Võtmekaugus: 14 mm
• lisaks vajatav toode (tootekood): 340.980.100
• Tootja: FA1 FISCHER

• Keermemõõt: M24x1,5
• Pikkus (mm): 13
• Võtmekaugus: 14 mm
• Kruvipea-/Mutriprofiil: sisekuuskant
• Piirangutega toode/piirangu info 2: koos rõngastihendiga

• Keermemõõt: M26x 1,5
• Kruvipikkus kruvipea all [mm]: 14
• Kruvipea-/Mutriprofiil: sisekuuskant
• Võtmekaugus: 14
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Tootja: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Pikkus (mm): 17
• Keermemõõt: M 26 x 1,50 x 14
• Võtmekaugus: 14
• Konteineri tüüp: Blisterpack
• Tootja: CORTECO
• Nimetus: COU 220153S

• Pikkus (mm): 17
• Välisläbimõõt [mm]: 32
• Väliskeerme mõõde: M26 x 1,5
• Keermepikkus (mm): 12
• Kvaliteet/klass: 6.8
• Võtmekaugus: 15
• Kruvipea-/Mutriprofiil: sisekuuskant
• Materjal: Metall
• Pealispind: tsingitud
• Kruvipikkus kruvipea all [mm]: 14
• Kaal (kg): 0,064
• Piirangutega toode/piirangu info 2: ilma rõngastihendita
• Nimetus: SULGURKRUVI, OLIVANN
• Tootja: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pikkus (mm): 17
• Välisläbimõõt [mm]: 32
• Väliskeerme mõõde: M26 x 1,5
• Keermepikkus (mm): 12
• Kvaliteet/klass: 6.8
• Võtmekaugus: 15
• Kruvipea-/Mutriprofiil: sisekuuskant
• Materjal: Metall
• Pealispind: tsingitud
• Kruvipikkus kruvipea all [mm]: 14
• Piirangutega toode/piirangu info 2: ilma rõngastihendita
• Tootja: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Siseläbimõõt [mm]: 12
• Välisläbimõõt [mm]: 17
• Jämedus/Tugevus (mm): 1,5
• Kuju: A-kuju
• Materjal: Vask