Lisainfo: Control arm bushing, rear

• Kaal (kg): 0,079
• Installatsiooni pool: Tagasild mõlemapoolselt, üleval
• Laagritüüp: Kummi-metalllaager
• Roolimisliik: õõtshoova jaoks
• Läbimõõt 1 (mm): 41,5
• Läbimõõt 2 (mm): 12,2
• Pikkus (mm): 38
• Tootja: RTS

• Installatsiooni pool: Tagasild vasakul, Tagasild paremal, all
• Seerianumber: ZTT-ME-011A

• Fitting Position: Rear Axle Left, Rear Axle Right, Lower
• Tootja: GSP

• Installatsiooni pool: väljas, Tagasild all, all
• for OE number: 2043520565
• Tootja: GSP ZAWIESZENIE

• Fitting Position: outer, Front, Rear Axle Middle
• Nimetus: Puks
• Tootja: MAX

• Fitting Position: outer, in front of axle, Rear Axle Upper
• Weight [kg]: 0.105
• Packaging length [cm]: 4.4
• Packaging width [cm]: 4.4
• Packaging height [cm]: 4.1
• Tootja: FEBEST

• Inner Diameter [mm]: 12.2
• Outer Diameter [mm]: 38.5
• Length [mm]: 38
• paired article number: 270814
• Weight [kg]: 0.07
• Installation Information: Important: Observe Fitting Instructions
• Tootja: A.B.S.

Installatsiooni pool: silla ees, Tagasild vasakul, Tagasild paremal, üleval

• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Tootja: GSP
• Lisainfo: 510452 GSP

• Installatsiooni pool: Tagasild üleval, ees, taga, kese, väljas
• Seerianumber: ZTT-ME-000H
• Tootja: NTY

• Fitting Position: outer, Front, Rear Axle Middle
• Weight [kg]: 0.2
• Packaging length [cm]: 4
• Packaging width [cm]: 4
• Packaging height [cm]: 3.7
• Tootja: FEBEST
• Lisainfo: FSTBZAB-026

• Installatsiooni pool: väljas, all, Tagasild vasakul, Tagasild paremal
• Välisläbimõõt [mm]: 40
• Laagritüüp: Kummi-metalllaager
• Seerianumber: ZTT-CH-005A
• Tootja: NTY

• Fitting Position: Rear Axle Lower
• Weight [kg]: 0.13
• Mounting Type: Rubber-Metal Mount
• Packaging length [cm]: 5
• Packaging width [cm]: 4
• Packaging height [cm]: 4
• Tootja: FEBEST

• Thickness [mm]: 38
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 44, 29
• Material: Rubber/Metal
• Control/Trailing Arm Type: for control arm
• Weight [kg]: 0.082
• Tootja: FEBI BILSTEIN

Fitting Position: Rear Axle Left, inner, Rear Axle Right, Upper, Front General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Width [mm]: 38
• Thickness [mm]: 39
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 39
• Weight [kg]: 0.07
• Nimetus: Puks - K„„ndmik DB T. W211
• Tootja: FEB

Fitting Position: Rear Axle Left, Lower, Front, Rear Axle Right, outer General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle Lower, Lower, Upper, Front
• Nimetus: Puks
• Tootja: MAX

• Fitting Position: Rear Axle Upper, Centre, inner
• Weight [kg]: 0.229
• Packaging length [cm]: 4.4
• Packaging width [cm]: 4.4
• Packaging height [cm]: 3.8
• Tootja: FEBEST

• Laagritüüp: Kummi-metalllaager
• Installatsiooni pool: Pealis
• Kvaliteediklass: PJ
• Nimetus: Control arm bush left=right

Lisainfo: "Tootja: TEKNOROT
(kvaliteediklass: PJ)"

• Kaal (kg): 0,08
• Installatsiooni pool: Tagasild mõlemapoolselt, üleval, taga
• Laagritüüp: Kummi-metalllaager
• Roolimisliik: õõtshoova jaoks
• Läbimõõt 1 (mm): 41,5
• Läbimõõt 2 (mm): 12,2
• Pikkus (mm): 40,4
• Tootja: RTS

• Fitting Position: Rear Axle Lower, Lower, Upper, Front
• Weight [kg]: 0.081
• Packaging length [cm]: 3.9
• Packaging width [cm]: 3.9
• Packaging height [cm]: 3.8
• Tootja: FEBEST

• Seerianumber: ZTP-ME-014A
• Materjal: Kumm/metall
• Tootja: NTY

Installatsiooni pool: Tagasild vasakul, Tagasild paremal, üleval, taga, sees

• Laagritüüp: Kummi-metalllaager
• Installatsiooni pool: Pealis
• Nimetus: Control arm bush left=right
• Kvaliteediklass: PJ

Lisainfo: "Tootja: TEKNOROT
MB W 204 07-
(kvaliteediklass: PJ)"

• Installatsiooni pool: Tagasild mõlemapoolselt, üleval
• Siseläbimõõt [mm]: 12
• Välisläbimõõt [mm]: 39
• Kõrgus (mm): 38
• Nimetus: ALT 85149AL
• Tootja: ALTE AUTOMOTIVE

• Installatsiooni pool: Tagasild, all, Käändmik, rattakinnitus, väljas
• Inner Diameter 1 [mm]: 12
• Outer Diameter 1 [mm]: 39
• Thickness 1 [mm]: 38
• Nimetus: DE TD1731W
• Tootja: DELPHI

• Installatsiooni pool: Tagasild
• Quantity Unit: Piece
• Mounting Type: Rubber-Metal Mount
• Net weight [kg]: 0.24
• Nimetus: Paigutus - K„„ndmik DB T.
• Tootja: NK

• Laagritüüp: Kummi-metalllaager
• Installatsiooni pool: Pealis
• Kvaliteediklass: PJ
• Nimetus: Control arm bush left=right

• Kaal (kg): 0,076
• Installatsiooni pool: Tagasild mõlemapoolselt, üleval, taga, väljas
• Laagritüüp: Kummi-metalllaager
• Roolimisliik: õõtshoova jaoks
• Siseläbimõõt [mm]: 12,2
• Välisläbimõõt [mm]: 39,5
• Pikkus (mm): 40,3
• Tootja: RTS

• Kaal (kg): 0,074
• Installatsiooni pool: Tagasild mõlemapoolselt, üleval, taga, sees
• Laagritüüp: Kummi-metalllaager
• Roolimisliik: õõtshoova jaoks
• Siseläbimõõt [mm]: 12,2
• Välisläbimõõt [mm]: 39,5
• Pikkus (mm): 38
• Tootja: RTS

• Ehitusaasta kuni: 12.2017
• Installatsiooni pool: kahepoolne
• Quality: OE Performance
• Fitting Position: Rear
• Colour: silver
• Weight [g]: 213
• Tootja: GATES

• Laagritüüp: Kummi-metalllaager
• Installatsiooni pool: Pealis
• Kvaliteediklass: PJ
• Nimetus: Control arm bush left=right

• Fitting Position: Rear Axle Left, Rear Axle Right, Rear Axle
• Height [mm]: 23
• Outer Diameter 1 [mm]: 40
• Inner Diameter 1 [mm]: 14
• Tootja: BGA

• Laagritüüp: Kummi-metalllaager
• Installatsiooni pool: Pealis
• Nimetus: Control arm bush left=right
• Kvaliteediklass: PJ

Lisainfo: "Tootja: TEKNOROT
MB W 220 99-
(kvaliteediklass: PJ)"

• Installatsiooni pool: Tagasild, kahepoolne, all, väljas
• Control/Trailing Arm Type: for control arm
• Tootja: LEMFORDER

• Installatsiooni pool: väljas, Tagasild mõlemapoolselt, all
• vajaminev tükihulk: 2
• paired article number: VKDS 438001
• Length [mm]: 48.3
• Height [mm]: 23
• Inner Diameter [mm]: 14.1
• Outer Diameter [mm]: 40
• Rod/Strut: Suspension Rod
• Tootja: SKF
• Nimetus: SK VKDS438001

• Fitting Position: inner, Rear Axle Middle
• Weight [kg]: 0.144
• Packaging length [cm]: 7.3
• Packaging width [cm]: 4
• Packaging height [cm]: 4
• Tootja: FEBEST

• Fitting Position: Rear Axle
• Weight [g]: 221
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 40
• Length [mm]: 24
• Overall Length [mm]: 48
• Nimetus: IM 31816
• Tootja: ORIGINAL IMPERIUM

• Fitting Position: Rear Axle
• Mounting Type: Rubber-Metal Mount
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 40
• for OE number: 2213520127
• Tootja: SASIC

• Fitting Position: Rear, Centre, outer, Rear Axle Upper, Front
• Weight [kg]: 0.088
• Packaging length [cm]: 4.2
• Packaging width [cm]: 4
• Packaging height [cm]: 4
• Tootja: FEBEST

• Installatsiooni pool: Tagasild all, kahepoolne, ees, väljas
• Mounting Type: Rubber-Metal Mount
• Length [mm]: 38
• Outer Diameter [mm]: 38.5
• Inner Diameter [mm]: 12.1
• Tootja: TRW

SVHC: No information available, please contact the manufacturer!

• Installatsiooni pool: Tagasild, väljas, taga, all
• Inner Diameter 1 [mm]: 12
• Outer Diameter 1 [mm]: 40
• Thickness 1 [mm]: 37
• Tootja: DELPHI

• Installatsiooni pool: Esisild, all, ees, väljas
• Siseläbimõõt [mm]: 14
• Välisläbimõõt [mm]: 40
• Kõrgus (mm): 48
• Nimetus: ALT 81086AL
• Tootja: ALTE AUTOMOTIVE

• Thickness [mm]: 40
• Inner Diameter [mm]: 12.2
• Outer Diameter [mm]: 39.7
• Material: Rubber/Metal
• Fitting Position: Rear Axle Left, Upper, Rear, Rear Axle Right
• Weight [kg]: 0.082
• Nimetus: Puks
• Tootja: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Width [mm]: 50
• Height [mm]: 50
• Height 1 [mm]: 78.2
• Outer Diameter 1 [mm]: 51.5
• Inner Diameter 1 [mm]: 12
• Tootja: GSP ZAWIESZENIE

• Fitting Position: Rear Axle Upper, outer, inner
• Nimetus: Puks
• Tootja: MAX

• Kaal (kg): 0,26
• Installatsiooni pool: Tagasild mõlemapoolselt, all
• Laagritüüp: Kummi-metalllaager
• Roolimisliik: õõtshoova jaoks
• Siseläbimõõt [mm]: 15
• Välisläbimõõt [mm]: 74
• Pikkus (mm): 50,5
• Tootja: RTS

• Height [mm]: 48
• Outer Diameter [mm]: 40
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Rear Axle, Lower
• Mounting Type: Hydro Mount
• Axle alignment required after fitting:
• Weight [kg]: 0.217
• Tootja: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Installatsiooni pool: Tagasild vasakul, Tagasild paremal, väljas, all
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 40.4
• Length [mm]: 36.4
• paired article number: 271464
• Weight [kg]: 0.08
• Installation Information: Important: Observe Fitting Instructions
• Tootja: A.B.S.

• Laagritüüp: Kummi-metalllaager
• Installatsiooni pool: Pealis
• Nimetus: Control arm bush left=right
• Kvaliteediklass: PJ

Lisainfo: "Tootja: TEKNOROT
MB W 204 07-
(kvaliteediklass: PJ)"

• Thickness [mm]: 78
• Inner Diameter [mm]: 12
• Outer Diameter 1 [mm]: 33
• Outer Diameter 2 [mm]: 51
• Weight [kg]: 0.27
• Nimetus: PUKS
• Tootja: FEB

Fitting Position: Rear Axle Left, Rear Axle Right, Lower, Rear, inner General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle Lower
• Weight [kg]: 0.233
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 40
• Mounting Type: Bushing
• Packaging length [cm]: 5.2
• Packaging width [cm]: 4.2
• Packaging height [cm]: 4.2
• Tootja: FEBEST
• Lisainfo: FSTMBAB-027Z

• Thickness [mm]: 38
• Inner Diameter [mm]: 12.5
• Outer Diameter [mm]: 39.5
• Material: Rubber/Metal
• Weight [kg]: 0.082
• Nimetus: Puks
• Tootja: FEB

Fitting Position: Rear Axle Left, Upper, Rear, inner, Rear Axle Right General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Kaal (kg): 0,27
• Installatsiooni pool: Tagasild mõlemapoolselt, all, taga, sees
• Laagritüüp: Kummi-metalllaager
• Roolimisliik: õõtshoova jaoks
• Siseläbimõõt [mm]: 51,3
• Välisläbimõõt [mm]: 12,2
• Pikkus (mm): 78
• Tootja: RTS

• Fitting Position: Rear Axle Upper, outer, inner
• Weight [kg]: 0.086
• Packaging length [cm]: 4
• Packaging width [cm]: 4
• Packaging height [cm]: 3.8
• Tootja: FEBEST

• Installatsiooni pool: Tagasild mõlemapoolselt, all, sees
• Siseläbimõõt [mm]: 12
• Välisläbimõõt [mm]: 51
• Kõrgus (mm): 78
• Nimetus: ALT 91765AL
• Tootja: ALTE AUTOMOTIVE

• Installatsiooni pool: Tagasild vasakul, Tagasild paremal, all
• Laagritüüp: Kummi-metalllaager
• vajaminev tükihulk: 1
• Siseläbimõõt [mm]: 14
• Välisläbimõõt [mm]: 40
• Garantii: Garantii 3 aastat või kuni 75 000 km
• Tootja: METZGER

• Installatsiooni pool: Tagasild
• Inner Diameter 1 [mm]: 12
• Outer Diameter 1 [mm]: 40
• Thickness 1 [mm]: 73
• Tootja: DELPHI
• Nimetus: DE TD1122W

• Laagritüüp: Kummi-metalllaager
• Installatsiooni pool: Pealis
• Kvaliteediklass: PJ
• Nimetus: Control arm bush left=right

Lisainfo: "Tootja: TEKNOROT
(kvaliteediklass: PJ)"

• Fitting Position: Lower, Front Axle Left, Front Axle Right
• Height [mm]: 80
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 53
• Supplementary Article/Supplementary Info: without holder
• Required quantity: 2
• replacement in pairs recommended:
• Tootja: MEY

Nimetus: Puks - K„„ndmik DB P. W212 E200/300/350/200CDI/220CDI/250CDI 09-

• Kaal (kg): 0,076
• Installatsiooni pool: Tagasild mõlemapoolselt, väljas, ees
• Laagritüüp: Kummi-metalllaager
• Roolimisliik: õõtshoova jaoks
• Siseläbimõõt [mm]: 12,2
• Välisläbimõõt [mm]: 40,3
• Pikkus (mm): 36,6
• Tootja: RTS

• Installatsiooni pool: Tagasild vasakul, Tagasild paremal, väljas, üleval
• Inner Diameter [mm]: 12.1
• Outer Diameter [mm]: 40.2
• Length [mm]: 73
• paired article number: 271463
• Weight [kg]: 0.18
• Installation Information: Important: Observe Fitting Instructions
• Tootja: A.B.S.

• Fitting Position: inner, Rear Axle Lower
• Weight [kg]: 0.396
• Packaging length [cm]: 7.8
• Packaging width [cm]: 5.1
• Packaging height [cm]: 5.1
• Tootja: FEBEST

• Fitting Position: Rear Axle, both sides, Centre, Lower, inner
• Nimetus: Paigutus - K„„ndmik DB T. W204 07-
• Tootja: LMI
• Lisainfo: 33268 01 LEM

• Installatsiooni pool: Esisild, sees, all, ees
• Inner Diameter 1 [mm]: 14
• Outer Diameter 1 [mm]: 76
• Thickness 1 [mm]: 80
• Tootja: DELPHI
• Nimetus: DE TD1867W

• Installatsiooni pool: Esisild, all
• Laagritüüp: Kummi-metalllaager
• Roolimisliik: õõtshoova jaoks
• Kõrgus (mm): 80
• Kaal (kg): 0,54
• Nimetus: DY 37-26869
• Tootja: DYS

• Width [mm]: 80, 61
• Thickness [mm]: 80
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 75
• Fitting Position: Front Axle Left, Front Axle Right
• Mounting Type: Hydro Mount
• Weight [kg]: 0.82
• Observe service information:
• Nimetus:
• Tootja: FEB
• Lisainfo: 44987 FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thickness [mm]: 73
• Inner Diameter [mm]: 12.2
• Outer Diameter [mm]: 40.3
• Material: Rubber/Metal
• Fitting Position: Rear Axle Left, Centre, inner, Rear Axle Right
• Weight [kg]: 0.06
• Nimetus: Puks
• Tootja: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Right, Front Axle Left, Rear
• Height [mm]: 80
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 75
• Supplementary Article/Supplementary Info: without holder
• reinforced version:
• Required quantity: 2
• Replace in pairs only:
• with environmental seal: Carbon Neutral
• Nimetus: Puks - K„„ndmik DB P. W212/S212 09- GàRA LE/PR
• Tootja: MEY
• Lisainfo: 0146100017/HD

General Information: No risk of leakage: MEYLE-HD full-rubber bushing with optimized rubber shape for a significantly longer lifetime.

• Width [mm]: 80, 61
• Thickness [mm]: 80
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 75
• Fitting Position: Front Axle Left, Front Axle Right
• Mounting Type: Hydro Mount
• Weight [kg]: 1.147
• Supplementary Article/Info 2: with fastening material
• Tootja: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.