• Fitting Position: outer, Front Axle Right
• Axle alignment required after fitting:
• paired article number: V95-0140
• Weight [kg]: 0.222
• Tootja: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle, inner, outer, Left, Right, Lower, Rear
• Fabrication Number: ZTT-MS-000C
• Tootja: NTY

• Installatsiooni pool: all, esisild vasakul, esisild paremal
• Kõrgus (mm): 60
• Siseläbimõõt [mm]: 12
• Välisläbimõõt [mm]: 37
• Roolimisliik: Õõtshoob
• Laagritüüp: Kummi-metalllaager
• Nimetus: Control arm bush left=right
• Kvaliteediklass: PJ

Lisainfo: "Tootja: SRL
VOLVO S/V40
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle, inner, Lower
• Mounting Type: Rubber-Metal Mount
• Thickness [mm]: 35
• Outer Diameter [mm]: 35
• Inner Diameter [mm]: 12
• Nimetus: Puks - K„„ndmik VOLVO T. V40 DOLNEGO WEW.
• Tootja: MAX

• Fabrication Number: ZTT-MS-007K
• Tootja: NTY
• Nimetus: NTY ZTT-MS-007K

Fitting Position: outer, Lower, Rear, Rear Axle Left, Rear Axle Right

• Installatsiooni pool: Esisild, silla ees, sees
• Net weight [kg]: 0.16
• Nimetus: Puks - K„„ndmik VOLVO P. S40/V40
• Tootja: NK

• Fitting Position: Rear Axle Left, Rear Axle Right, Centre, Lower
• Fabrication Number: ZTT-MS-007D
• Tootja: NTY

• Installatsiooni pool: Tagasild mõlemapoolselt
• Tootja: OYODO

• Fitting Position: Rear Axle, outer, inner
• Control/Trailing Arm Type: for semi-trailing arm
• Fabrication Number: ZTT-CH-006A
• Tootja: NTY

• Laagritüüp: Kummi-metalllaager
• Installatsiooni pool: Pealis
• Nimetus: Control arm bush left=right
• Kvaliteediklass: PJ

Lisainfo: "Tootja: TEKNOROT
VOLVO S/V40
(kvaliteediklass: PJ)"

• Installatsiooni pool: Tagasild all
• Siseläbimõõt 2 (mm): 12
• Control/Trailing Arm Type: for control arm
• Fitting Position: Rear Axle, Rear, Lower, both sides
• Outer Diameter 1 [mm]: 35.6
• Weight [kg]: 0.169
• Inner Diameter [mm]: 12
• Required quantity: 2
• Outer Diameter 2 [mm]: 36.6
• Nimetus: Puks - K„„ndmik VOLVO T. V40 WEW.
• Tootja: TED

• Fitting Position: Rear Axle, Left, Right, Front
• Weight [g]: 380
• Nimetus: IM 1570
• Tootja: ORIGINAL IMPERIUM

• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 37.5
• Length [mm]: 59.7
• paired article number: 270640
• Weight [kg]: 0.14
• Installation Information: Important: Observe Fitting Instructions
• Tootja: A.B.S.

Installatsiooni pool: silla ees, esisild vasakul, esisild paremal, sees, all

• Fitting Position: Front, Lower, Front Axle Right, Front Axle Left
• Height [mm]: 60
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 36
• Nimetus: Puks - K„„ndmik VOLVO P. S40/V40
• Tootja: MAX

• Fitting Position: Rear, Lower, Front Axle Left
• Inner Diameter [mm]: 21
• paired article number: 72-2284
• Nimetus: Puks - K„„ndmik VOLVO P. S40 97-00 LE
• Tootja: MAX

• Fitting Position: Rear Axle, Centre
• Tootja: GSP

• Fitting Position: Rear, Lower, Front Axle Right
• Inner Diameter [mm]: 21
• paired article number: 72-2283
• Nimetus: Puks - K„„ndmik VOLVO P. S40 97-00 PR
• Tootja: MAX

• Fabrication Number: ZTT-MS-000D
• Tootja: NTY

Fitting Position: Rear Axle, outer, in front of axle, Left, Right, Lower

• Installatsiooni pool: Tagasild
• Tootja: JAPKO

• Laagritüüp: Kummi-metalllaager
• Installatsiooni pool: Pealis
• Nimetus: Control arm bush left=right
• Kvaliteediklass: PJ

Lisainfo: "Tootja: TEKNOROT
M.COLT/LANCER 92-95
(kvaliteediklass: PJ)"

• Fitting Position: Front, Lower, Front Axle Left, Front Axle Right
• Height [mm]: 60
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 36
• Supplementary Article/Supplementary Info: without holder
• Required quantity: 2
• replacement in pairs recommended:
• Nimetus: Puks - K„„ndmik VOLVO P. S40/V40
• Tootja: MEY

• Thickness [mm]: 35
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 35
• Fitting Position: Rear Axle Left, inner, Lower, Rear Axle Right
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.15
• Nimetus: Paigutus - K„„ndmik VOLVO T. V40 WEW.
• Tootja: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: taga, esisild vasakul
• Siseläbimõõt [mm]: 21
• Roolimisliik: Õõtshoob
• Laagritüüp: Kummi-metalllaager
• Kvaliteediklass: PJ
• Nimetus: Control arm bush left

• Installatsiooni pool: taga, esisild paremal
• Siseläbimõõt [mm]: 21
• Roolimisliik: Õõtshoob
• Laagritüüp: Kummi-metalllaager
• Kvaliteediklass: PJ
• Nimetus: Control arm bush right

• Fitting Position: outer, Rear, Rear Axle, Lower
• Mounting Type: Rubber-Metal Mount
• Thickness [mm]: 50
• Outer Diameter [mm]: 40
• Inner Diameter [mm]: 12
• Nimetus: Puks - K„„ndmik MITSUBISHI T. OUTLANDER/LANCER 03-
• Tootja: MAX

• Fitting Position: Rear Axle, Front
• Mounting Type: Rubber-Metal Mount
• Thickness [mm]: 75
• Outer Diameter [mm]: 70
• Inner Diameter [mm]: 12
• Nimetus: Laagripuks, ootshoob
• Tootja: MAX

• Laagritüüp: Kummi-metalllaager
• Installatsiooni pool: Pealis
• Nimetus: Control arm bush left
• Kvaliteediklass: PJ

Lisainfo: "Tootja: TEKNOROT
VOLVO S/V40
(kvaliteediklass: PJ)"

• Fitting Position: outer, Centre, Rear Axle
• Weight [kg]: 0.185
• Mounting Type: Rubber-Metal Mount
• Packaging length [cm]: 5
• Packaging width [cm]: 4
• Packaging height [cm]: 4
• Tootja: FEBEST

• Installatsiooni pool: Tagasild mõlemapoolselt, ees
• vajaminev tükihulk: 2
• paired article number: VKDS 436004
• Height [mm]: 75
• Inner Diameter [mm]: 12.2
• Outer Diameter [mm]: 77.2
• Nimetus: SK VKDS436004
• Tootja: SKF

• Thickness [mm]: 75
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 70
• Fitting Position: Rear Axle Left, Front, Rear Axle Right
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.5
• Tootja: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Nimetus: Puks - K„„ndmik VOLVO T. S40/V40 /CARISMA/COLT/SPACE STAR PO 02/2002

• Thickness [mm]: 75
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 70
• Fitting Position: Rear Axle Left, Front, Rear Axle Right
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.5
• Tootja: BLP

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Nimetus: Puks - K„„ndmik VOLVO T. S40/V40 /CARISMA/COLT/SPACE STAR DO 02/2002

• Laagritüüp: Kummi-metalllaager
• Installatsiooni pool: Pealis
• Nimetus: Control arm bush right
• Kvaliteediklass: PJ

Lisainfo: "Tootja: TEKNOROT
VOLVO S/V40
(kvaliteediklass: PJ)"

• Thickness [mm]: 75
• Inner Diameter [mm]: 12.3
• Outer Diameter [mm]: 70
• Fitting Position: Rear Axle Left, Front, Rear Axle Right
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.458
• Nimetus: SW 80 94 1112
• Tootja: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Right, Front Axle
• Weight [g]: 403
• Nimetus: IM 7039
• Tootja: ORIGINAL IMPERIUM

• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Jämedus/Tugevus (mm): 75
• Siseläbimõõt [mm]: 12
• Välisläbimõõt [mm]: 70
• Roolimisliik: Längslenker
• Laagritüüp: Kummi-metalllaager
• Nimetus: Control arm bush left=right
• Kvaliteediklass: PJ

Lisainfo: "Tootja: SRL
M. COLT/LANCER, 92-
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle Left, Rear, Lower
• Inner Diameter [mm]: 21
• Supplementary Article/Supplementary Info: with holder
• Required quantity: 1
• replacement in pairs recommended:
• paired article number: 514 308 0003
• Nimetus: Puks - K„„ndmik VOLVO P. S40 97-00 LE
• Tootja: MEY

• Fitting Position: Front Axle Right, Rear, Lower
• Inner Diameter [mm]: 21
• Supplementary Article/Supplementary Info: with holder
• Required quantity: 1
• replacement in pairs recommended:
• paired article number: 514 308 0002
• Nimetus: Puks - K„„ndmik VOLVO P. S40 97-00 PR
• Tootja: MEY

• Thickness [mm]: 50
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 40
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.22
• Nimetus: Puks - K„„ndmik MITSUBISHI T. OUTLANDER/LANCER 03-
• Tootja: BLP

Fitting Position: outer, Rear, Rear Axle Left, Lower, Rear Axle Right General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle, outer, Centre
• Weight [kg]: 0.265
• Packaging length [cm]: 5
• Packaging width [cm]: 4
• Packaging height [cm]: 4
• Tootja: FEBEST

• Outer Diameter [mm]: 36
• Material: Rubber/Metal
• Outer Length [mm]: 106
• Fitting Position: Rear Axle Left, Rear Axle Right
• Hole Spacing [mm]: 83.5
• Weight [kg]: 0.237
• Nimetus: Puks - K„„ndmik MITUBISHI T. COLT
• Tootja: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thickness [mm]: 50
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 40
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.22
• Nimetus: Puks - K„„ndmik MITSUBISHI T. OUTLANDER/LANCER 03-
• Tootja: FEB

Fitting Position: outer, Rear, Rear Axle Left, Lower, Rear Axle Right General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: Tagasild, ees
• Roolimisliik: für Längslenker
• Mounting Type: Rubber-Metal Mount
• Inner Diameter [mm]: 12.1
• Outer Diameter [mm]: 70.1
• Width [mm]: 75
• SVHC: No SVHC present!
• Tootja: FAG

• Installatsiooni pool: silla taga, esisild vasakul, sees, all
• Inner Diameter [mm]: 20.5
• Outer Diameter [mm]: 62
• Length [mm]: 49
• paired article number: 270642
• Weight [kg]: 0.4
• Installation Information: Important: Observe Fitting Instructions
• Tootja: A.B.S.

• Installatsiooni pool: silla taga, esisild paremal, sees, all
• Inner Diameter [mm]: 20.5
• Outer Diameter [mm]: 62
• Length [mm]: 49
• paired article number: 270641
• Weight [kg]: 0.4
• Installation Information: Important: Observe Fitting Instructions
• Tootja: A.B.S.