• Installatsiooni pool: Tagasild vasakul
• pidurikettajämedusele (mm): 10
• Kolvi läbimõõt [mm]: 41
• pidurikettaläbimõõdule (mm): 302
• Piirangutega toode/piirangu info 2: ilma kinnitusraamideta
• Seerianumber: HZT-MS-019
• paaris tootenumbrid: HZT-MS-020
• Tootja: NTY
• Nimetus: NTY HZT-MS-019

• Installatsiooni pool: Tagasild paremal
• pidurikettajämedusele (mm): 10
• Pidurisadulateostus: Pidurisadul (1 kolb)
• Kolvi läbimõõt [mm]: 41
• pidurikettaläbimõõdule (mm): 302
• Piirangutega toode/piirangu info 2: ilma kinnitusraamideta
• Seerianumber: HZT-MS-020
• paaris tootenumbrid: HZT-MS-019
• Tootja: NTY
• Nimetus: NTY HZT-MS-020

• Fitting Position: Rear Axle
• Diameter [mm]: 36
• Brake System: Akebono
• Version: Basic Parts
• Nimetus: FR 236073
• Tootja: FRENKIT

• Installatsiooni pool: Tagasild
• Ehitusaasta kuni: 06.2012
• Pidurisüsteem: Akebono
• pidurikettajämedusele (mm): 10
• Pidurisadulateostus: Pidurisadul (1 kolb)
• Diameter [mm]: 35
• Quantity per axle: 2
• Tootja: QUICK BRAKE
• Nimetus: QB 114-0128

• Fitting Position: Front Axle
• Diameter [mm]: 58
• Brake System: Akebono
• Version: Basic Parts
• Nimetus: FR 258015
• Tootja: FRENKIT

• Fitting Position: Rear Axle
• Diameter [mm]: 42
• Brake System: Akebono
• Version: Basic Parts
• Nimetus: FR 242080
• Tootja: FRENKIT

• Fitting Position: Rear Axle
• Diameter [mm]: 35
• Brake System: Akebono
• Tootja: FRENKIT
• Nimetus: FR 235026

• Fitting Position: Rear Axle
• Diameter [mm]: 35
• Brake System: AKE
• Tootja: AUTOFREN SEINSA
• Nimetus: SE D4-1812
• Lisainfo: D41812

• Käigukasti liik: Käigukast
• Tootmise kuupäev alates: 201006
• tootmise kuupäev kuni: 201206
• Fitting Position: Rear Axle
• Weight [kg]: 0.024
• Brake System: SUMITOMO
• Packaging length [cm]: 5
• Packaging width [cm]: 5
• Packaging height [cm]: 2
• Tootja: FEBEST

• Fitting Position: Front Axle
• Diameter [mm]: 57
• Brake System: Akebono
• Nimetus: FR 257072
• Tootja: FRENKIT

• Installatsiooni pool: Tagasild
• Ehitusaasta kuni: 06.2012
• Pidurisüsteem: Akebono
• pidurikettajämedusele (mm): 10
• Pidurisadulateostus: Pidurisadul (1 kolb)
• Diameter [mm]: 35
• Quantity per axle: 2
• Supplementary Article/Supplementary Info: with piston
• Tootja: QUICK BREAK

• Fitting Position: Rear Axle
• Diameter [mm]: 41
• Brake System: AKEBONO
• for OE number: 4605B649
• Tootja: AUTOFREN SEINSA
• Nimetus: SE D4-2697

• Installatsiooni pool: Esisild
• Pidurisüsteem: Akebono
• pidurikettajämedusele (mm): 26
• Pidurisadulateostus: Pidurisadul (1 kolb)
• Diameter [mm]: 57
• Quantity per axle: 2
• Tootja: QUICK BRAKE
• Nimetus: QB 114-0241

• Installatsiooni pool: Tagasild
• Ehitusaasta alates: 07.2012
• Pidurisüsteem: Akebono
• pidurikettajämedusele (mm): 10
• Pidurisadulateostus: Pidurisadul (1 kolb)
• Diameter [mm]: 41
• Quantity per axle: 2
• Tootja: QUICK BRAKE
• Nimetus: QB 114-0266

• Fitting Position: Rear Axle
• Diameter [mm]: 41
• Brake System: Akebono
• Tootja: FRENKIT
• Nimetus: FR 241007

• Fitting Position: Front Axle
• Diameter [mm]: 57
• Brake System: AKE
• for OE number: 05191238AA
• Tootja: AUTOFREN SEINSA
• Nimetus: SE D4-1814

• Tootmise kuupäev alates: 201303
• Fitting Position: Rear Axle
• Weight [kg]: 0.038
• Brake System: AKEBONO
• Packaging length [cm]: 10
• Packaging width [cm]: 10
• Packaging height [cm]: 2
• Tootja: FEBEST

• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Manufacturer Restriction: AKEBONO
• Bolt Length [mm]: 83, 80.8
• Tootja: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Diameter [mm]: 35
• Brake System: Akebono
• Version: Kit+Piston
• Full Set:
• Tootja: FRENKIT
• Nimetus: FR 235925

• Fitting Position: Rear Axle
• Diameter [mm]: 41
• Brake System: AKE
• Full Set:
• for OE number: 1609901380
• Tootja: AUTOFREN SEINSA
• Nimetus: SE D4-2698C

• Installatsiooni pool: Tagasild
• Kogus pakendis: 2
• Manufacturer Restriction: AKEBONO
• Bolt Length [mm]: 72
• Tootja: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Diameter [mm]: 35
• Brake System: AKE
• Full Set:
• for OE number: 05191267AA
• Tootja: AUTOFREN SEINSA
• Nimetus: SE D4-1813C

• Installatsiooni pool: Tagasild
• Ehitusaasta alates: 07.2012
• Pidurisüsteem: Akebono
• pidurikettajämedusele (mm): 10
• Pidurisadulateostus: Pidurisadul (1 kolb)
• Diameter [mm]: 41
• Quantity per axle: 2
• Supplementary Article/Supplementary Info: with piston
• Tootja: QUICK BRAKE
• Nimetus: QB 114-5277

• Fitting Position: Rear Axle
• Diameter [mm]: 41
• Brake System: Akebono
• Version: Kit+Piston
• Full Set:
• Tootja: FRENKIT
• Nimetus: FR 241915

• Fitting Position: Front Axle
• Diameter [mm]: 57
• Brake System: Akebono
• Version: Kit+Piston
• Full Set:
• Tootja: FRENKIT
• Nimetus: FR 257973

• Installatsiooni pool: Esisild
• Pidurisüsteem: Akebono
• pidurikettajämedusele (mm): 26
• Pidurisadulateostus: Pidurisadul (1 kolb)
• Diameter [mm]: 57
• Quantity per axle: 2
• Supplementary Article/Supplementary Info: with piston
• Tootja: QUICK BRAKE
• Nimetus: QB 114-5102

• Fitting Position: Front Axle
• Diameter [mm]: 57
• Full Set:
• Brake System: AKEBONO
• Version: KIT+PISTON
• for OE number: 1607499380
• Tootja: AUTOFREN SEINSA
• Nimetus: SE D4-2227C

• Versioon: Superkit
• Fitting Position: Rear Axle
• Diameter [mm]: 35
• Brake System: Akebono
• Version: Kit+Piston+GuidePins
• Full Set:
• Tootja: FRENKIT
• Nimetus: FR 735075
• Lisainfo: 735075 FRENKIT

• Fitting Position: Rear Axle
• Diameter [mm]: 41
• Brake System: Akebono
• Version: Kit+Piston
• Full Set:
• Nimetus: FR 241918
• Tootja: FRENKIT

• Fitting Position: Front Axle
• Diameter [mm]: 57
• Brake System: AKEBONO
• Full Set:
• Version: PISTON KIT+GUIDEPINS
• for OE number: 4605A257
• Tootja: AUTOFREN SEINSA
• Nimetus: SE D4-4035S

• Fitting Position: Rear Axle
• Brake System: AKE
• Diameter [mm]: 41
• Full Set:
• Version: WITH MECHANISM
• Nimetus: SE D4-2698K
• Tootja: AUTOFREN SEINSA

• Versioon: Superkit
• Fitting Position: Front Axle
• Diameter [mm]: 57
• Brake System: Akebono
• Version: Kit+Piston+GuidePins
• Full Set:
• Tootja: FRENKIT
• Nimetus: FR 757014

• Ehitusaasta kuni: 06.2012
• Installatsiooni pool: Tagasild vasakul, Tagasild
• pidurikettajämedusele (mm): 10
• Kolvi läbimõõt [mm]: 35
• pidurikettaläbimõõdule (mm): 302
• Piirangutega toode/piirangu info 2: ilma kinnitusraamideta
• Käigukasti liik: Käigukast
• Seerianumber: HZT-MS-009
• paaris tootenumbrid: HZT-MS-010
• Tootja: NTY

• Ehitusaasta kuni: 06.2012
• Installatsiooni pool: Tagasild paremal, Tagasild
• pidurikettajämedusele (mm): 10
• pidurikettaläbimõõdule (mm): 302
• Kolvi läbimõõt [mm]: 32
• Piirangutega toode/piirangu info 2: ilma kinnitusraamideta
• Käigukasti liik: Käigukast
• Seerianumber: HZT-MS-010
• paaris tootenumbrid: HZT-MS-009
• Tootja: NTY

• Ehitusaasta kuni: 06.2012
• Installatsiooni pool: Tagasild paremal
• Pidurisadulateostus: Pidurisadul (1 kolb)
• Pidurisüsteem: AKEBONO
• Garantii: 3 aastat garantii
• Kinnitusaukude vahe (mm): 130
• Vana detaili tagastus mittevajalik:
• paaris tootenumbrid: 45SKV603
• Kaal (kg): 1,96
• Pidurikettajämedus [mm]: 10
• Pidurisadula kolvi läbimõõt [mm]: 35
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Tootja: SKV GERMANY
• Nimetus: CE 45SKV604

• Ehitusaasta kuni: 06.2012
• Installatsiooni pool: Tagasild vasakul
• Pidurisadulateostus: Pidurisadul (1 kolb)
• Pidurisüsteem: AKEBONO
• Garantii: 3 aastat garantii
• Kinnitusaukude vahe (mm): 130
• Vana detaili tagastus mittevajalik:
• paaris tootenumbrid: 45SKV604
• Kaal (kg): 1,96
• Pidurikettajämedus [mm]: 10
• Pidurisadula kolvi läbimõõt [mm]: 35
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Tootja: SKV GERMANY
• Nimetus: CE 45SKV603

• pidurikettajämedusele (mm): 26
• pidurikettaläbimõõdule (mm): 294
• Aukudevaheline kaugus [mm]: 174
• Kinnitusaukude vahe 2 (mm): 127
• Kaal (g): 1,59
• Piirangutega toode/piirangu info 2: koos pidurisadula kruvidega
• Tootja: AUTO-GH
• Nimetus: GH 449333

Installatsiooni pool: esisild mõlemapoolselt, paremal, vasakul, esisild paremal, esisild vasakul

• Fitting Position: Rear Axle Left
• Brake System: AKEBONO
• Material: Cast Iron
• Brake Caliper Type: Brake Caliper (1 piston)
• Supplementary Article/Supplementary Info: without electric motor
• Piston Diameter [mm]: 35
• for brake disc thickness [mm]: 10
• Distance of mounting bores [mm]: 130
• paired article number: JBC0616
• Tootja: KAMOKA UK£ADY HAMULCOWE

• Fitting Position: Rear Axle Right
• Brake System: AKEBONO
• Material: Cast Iron
• Brake Caliper Type: Brake Caliper (1 piston)
• Supplementary Article/Supplementary Info: without electric motor
• Piston Diameter [mm]: 35
• for brake disc thickness [mm]: 10
• Distance of mounting bores [mm]: 130
• paired article number: JBC0615
• Tootja: KAMOKA UK£ADY HAMULCOWE

• Ehitusaasta kuni: 06.2012
• Fitting Position: Rear Axle Right
• Brake Caliper Type: Brake Caliper (1 piston)
• Brake System: AKEBONO
• for brake disc thickness [mm]: 10
• for brake disc diameter [mm]: 302
• Piston Diameter [mm]: 35
• paired article number: 131-04-383
• New Part:
• Used part return not required:
• Tootja: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Ehitusaasta kuni: 06.2012
• Fitting Position: Rear Axle Left
• Brake Caliper Type: Brake Caliper (1 piston)
• Brake System: AKEBONO
• for brake disc thickness [mm]: 10
• for brake disc diameter [mm]: 302
• Piston Diameter [mm]: 35
• paired article number: 131-04-384
• New Part:
• Used part return not required:
• Tootja: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Piston Diameter [mm]: 57
• Brake Caliper Type: Brake Caliper (1 piston)
• for brake disc thickness [mm]: 26
• Brake System: AKEBONO
• Fitting Position: Front Axle Right
• paired article number: 131-04-657
• Tootja: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Piston Diameter [mm]: 57
• Brake Caliper Type: Brake Caliper (1 piston)
• for brake disc thickness [mm]: 26
• Brake System: AKEBONO
• Fitting Position: Front Axle Left
• paired article number: 131-04-658
• Tootja: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Versioon: Superkit
• Fitting Position: Rear Axle
• Diameter [mm]: 41
• Brake System: Akebono
• Version: Kit+Piston+GuidePins
• Full Set:
• Nimetus: FR 741194
• Tootja: FRENKIT

• Fitting Position: Rear Axle Right
• Brake Caliper Type: Brake Caliper (1 piston), Floating Caliper
• Brake Caliper Piston Diameter [mm]: 35
• Brake Disc Type: solid
• for brake disc diameter [mm]: 302
• for brake disc thickness [mm]: 10
• Manufacturer Restriction: AKEBONO

• Fitting Position: Rear Axle Left
• Brake Caliper Type: Floating Caliper, Brake Caliper (1 piston)
• Brake Caliper Piston Diameter [mm]: 35
• Brake Disc Type: solid
• for brake disc diameter [mm]: 302
• for brake disc thickness [mm]: 10
• Manufacturer Restriction: AKEBONO
• Tootja: JP GROUP

• Käigukasti liik: Käigukast
• Tootmise kuupäev alates: 201006
• tootmise kuupäev kuni: 201206
• Fitting Position: Rear Axle
• Weight [kg]: 0.605
• Packaging length [cm]: 16
• Packaging width [cm]: 8
• Packaging height [cm]: 6
• Tootja: FEBEST
• Lisainfo: 0477C-CWR FEBEST

• Installatsiooni pool: esisild paremal
• Pidurisadulateostus: Pidurisadul (1 kolb)
• Pidurisüsteem: AKEBONO
• Garantii: 3 aastat garantii
• Kinnitusaukude vahe (mm): 174
• Vana detaili tagastus mittevajalik:
• paaris tootenumbrid: 45SKV821
• Kaal (kg): 3,5
• Pidurikettajämedus [mm]: 26
• Pidurisadula kolvi läbimõõt [mm]: 57
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Tootja: SKV GERMANY

• Fitting Position: Front Axle Left
• Brake System: AKEBONO
• Material: Grey Cast Iron
• Brake Caliper Type: Brake Caliper (1 piston)
• Supplementary Article/Supplementary Info: without electric motor
• Piston Diameter [mm]: 57
• for brake disc thickness [mm]: 26
• Distance of mounting bores [mm]: 174
• paired article number: JBC1084
• Tootja: KAMOKA

• Fitting Position: Front Axle Right
• Brake System: AKEBONO
• Material: Grey Cast Iron
• Brake Caliper Type: Brake Caliper (1 piston)
• Supplementary Article/Supplementary Info: without electric motor
• Piston Diameter [mm]: 57
• for brake disc thickness [mm]: 26
• Distance of mounting bores [mm]: 174
• paired article number: JBC1083
• Tootja: KAMOKA

• Installatsiooni pool: Esisild, esisild vasakul
• Piirangutega toode/piirangu info 2: koos kinnitusraamiga
• Seerianumber: HZP-MS-006
• paaris tootenumbrid: HZP-MS-007
• Tootja: NTY

• Installatsiooni pool: Esisild, esisild paremal
• Piirangutega toode/piirangu info 2: koos kinnitusraamiga
• Seerianumber: HZP-MS-007
• paaris tootenumbrid: HZP-MS-006
• Tootja: NTY

• Tootmise kuupäev alates: 201303
• Fitting Position: Rear Axle
• Weight [kg]: 1.27
• Packaging length [cm]: 17.5
• Packaging width [cm]: 8.5
• Packaging height [cm]: 7.5
• Tootja: FEBEST
• Lisainfo: 0477C-GFR FEBEST

• Installatsiooni pool: esisild vasakul
• Pidurisadulateostus: Pidurisadul (1 kolb)
• Pidurisüsteem: AKEBONO
• Garantii: 3 aastat garantii
• Kinnitusaukude vahe (mm): 174
• Vana detaili tagastus mittevajalik:
• paaris tootenumbrid: 45SKV822
• Kaal (kg): 3,5
• Pidurikettajämedus [mm]: 26
• Pidurisadula kolvi läbimõõt [mm]: 57
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Nimetus: CE 45SKV821
• Tootja: ESEN SKV

• Fitting Position: Rear Axle
• Diameter [mm]: 41
• Brake System: AKEBONO
• Full Set:
• Version: PISTON KIT+GUIDEPINS, WITH MECHANISM
• Tootja: AUTOFREN SEINSA
• Nimetus: SE D4-4126S

• Ehitusaasta kuni: 06.2012
• paired article number: 181170
• Brake Caliper Piston Diameter [mm]: 35
• Brake Caliper Type: Brake Caliper (1 piston)
• New Part:
• Material: Cast Iron
• Fitting Position: Rear Axle Right
• Weight [kg]: 1.712
• Tootja: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Ehitusaasta kuni: 06.2012
• paired article number: 181171
• Brake Caliper Piston Diameter [mm]: 35
• Brake Caliper Type: Brake Caliper (1 piston)
• New Part:
• Material: Cast Iron
• Fitting Position: Rear Axle Left
• Weight [kg]: 1.712
• Tootja: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Left
• Brake Caliper Type: Floating Caliper, Brake Caliper (1 piston)
• Brake Caliper Piston Diameter [mm]: 57
• Brake Disc Type: Vented
• for brake disc diameter [mm]: 276, 294
• for brake disc thickness [mm]: 26
• Manufacturer Restriction: AKEBONO
• Tootja: JP GROUP

• Fitting Position: Front Axle Right
• Brake Caliper Type: Floating Caliper, Brake Caliper (1 piston)
• Brake Caliper Piston Diameter [mm]: 57
• Brake Disc Type: Vented
• for brake disc diameter [mm]: 276, 294
• for brake disc thickness [mm]: 26
• Manufacturer Restriction: AKEBONO
• Tootja: JP GROUP

• Ehitusaasta alates: 07.2012
• Piston Diameter [mm]: 41
• Brake Caliper Type: Brake Caliper (1 piston)
• for brake disc thickness [mm]: 10
• Brake System: AKEBONO
• Fitting Position: Rear Axle Left
• paired article number: 131-04-782
• Tootja: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Ehitusaasta alates: 07.2012
• Piston Diameter [mm]: 41
• Brake Caliper Type: Brake Caliper (1 piston)
• for brake disc thickness [mm]: 10
• Brake System: AKEBONO
• Fitting Position: Rear Axle Right
• paired article number: 131-04-781
• Tootja: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Ehitusaasta kuni: 06.2012
• paired article number: ADBP450145
• Brake Caliper Piston Diameter [mm]: 35
• Brake Caliper Type: Brake Caliper (1 piston)
• New Part:
• Material: Cast Iron
• Fitting Position: Rear Axle Right
• Weight [kg]: 1.712
• Tootja: BLUE PRINT HAMULCE

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Ehitusaasta kuni: 06.2012
• paired article number: ADBP450146
• Brake Caliper Piston Diameter [mm]: 35
• Brake Caliper Type: Brake Caliper (1 piston)
• New Part:
• Material: Cast Iron
• Fitting Position: Rear Axle Left
• Weight [kg]: 1.712
• Tootja: BLUE PRINT HAMULCE

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Ehitusaasta alates: 07.2012
• Installatsiooni pool: Tagasild vasakul
• Pidurisadulateostus: Pidurisadul (1 kolb)
• Pidurisüsteem: AKEBONO
• Garantii: 3 aastat garantii
• Kinnitusaukude vahe (mm): 132
• Vana detaili tagastus mittevajalik:
• paaris tootenumbrid: 50SKV104
• Kaal (kg): 2,77
• Pidurikettajämedus [mm]: 10
• Pidurisadula kolvi läbimõõt [mm]: 41
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Tootja: SKV GERMANY
• Nimetus: CE 50SKV103

• Ehitusaasta alates: 07.2012
• Installatsiooni pool: Tagasild paremal
• Pidurisadulateostus: Pidurisadul (1 kolb)
• Pidurisüsteem: AKEBONO
• Garantii: 3 aastat garantii
• Kinnitusaukude vahe (mm): 132
• Vana detaili tagastus mittevajalik:
• paaris tootenumbrid: 50SKV103
• Kaal (kg): 2,8
• Pidurikettajämedus [mm]: 10
• Pidurisadula kolvi läbimõõt [mm]: 41
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Tootja: SKV GERMANY
• Nimetus: CE 50SKV104

• Fitting Position: Rear Axle Right
• Brake System: AKEBONO
• Material: Cast Iron
• Brake Caliper Type: Brake Caliper (1 piston)
• Supplementary Article/Supplementary Info: without electric motor
• Piston Diameter [mm]: 41
• for brake disc thickness [mm]: 10
• Distance of mounting bores [mm]: 132
• paired article number: JBC0623
• Tootja: KAMOKA
• Lisainfo: JBC0624 KAMOKA

• tootmise kuupäev kuni: 30.06.2012
• Installatsiooni pool: Tagasild paremal
• paaris tootenumbrid: 6261517
• Versioon: IAM
• Uus osa:
• Vana detaili tagastus mittevajalik:
• Tootja: METZGER

• Fitting Position: Rear Axle Left
• Brake System: AKEBONO
• Material: Cast Iron
• Brake Caliper Type: Brake Caliper (1 piston)
• Supplementary Article/Supplementary Info: without electric motor
• Piston Diameter [mm]: 41
• for brake disc thickness [mm]: 10
• Distance of mounting bores [mm]: 132
• paired article number: JBC0624
• Tootja: KAMOKA
• Lisainfo: JBC0623

• Ehitusaasta alates: 07.2012
• Fitting Position: Rear Axle Right
• Brake Caliper Piston Diameter [mm]: 41
• Brake Disc Type: solid
• for brake disc diameter [mm]: 302
• for brake disc thickness [mm]: 10
• Manufacturer Restriction: AKEBONO

Brake Caliper Type: Brake Caliper with integrated parking brake, Brake Caliper (1 piston)

• Ehitusaasta alates: 07.2012
• Fitting Position: Rear Axle Left
• Brake Caliper Piston Diameter [mm]: 41
• Brake Disc Type: solid
• for brake disc diameter [mm]: 302
• for brake disc thickness [mm]: 10
• Manufacturer Restriction: AKEBONO

Brake Caliper Type: Brake Caliper with integrated parking brake, Brake Caliper (1 piston)

• Ehitusaasta alates: 07.2012
• paired article number: 186200
• Brake Caliper Piston Diameter [mm]: 41
• Brake Caliper Type: Brake Caliper (1 piston)
• Material: Cast Iron
• Fitting Position: Rear Axle Left
• Weight [kg]: 2.615
• Observe service information:
• Tootja: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Ehitusaasta alates: 07.2012
• paired article number: 186203
• Brake Caliper Piston Diameter [mm]: 41
• Brake Caliper Type: Brake Caliper (1 piston)
• Material: Cast Iron
• Fitting Position: Rear Axle Right
• Weight [kg]: 2.615
• Observe service information:
• Tootja: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• paired article number: 184700
• Brake Caliper Piston Diameter [mm]: 57
• Brake Caliper Type: Brake Caliper (1 piston)
• New Part:
• Material: Cast Iron
• Fitting Position: Front Axle Right
• Weight [kg]: 3.1
• Tootja: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• paired article number: 184701
• Brake Caliper Piston Diameter [mm]: 57
• Brake Caliper Type: Brake Caliper (1 piston)
• New Part:
• Material: Cast Iron
• Fitting Position: Front Axle Left
• Weight [kg]: 3.1
• Tootja: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: silla ees, esisild vasakul
• paaris tootenumbrid: 344331
• Pidurisüsteem: AKEBONO
• Pidurikettajämedus [mm]: 26
• Pidurisadulateostus: Pidurisadul (1 kolb)
• Läbimõõt [mm]: 57
• Tootja: BUDWEG CALIPER

• Ehitusaasta alates: 06.2010
• Installatsiooni pool: esisild vasakul
• Brake Caliper Type: Fist-type Caliper
• Exchange Part:
• Piston Diameter [mm]: 57
• Supplementary Article/Supplementary Info: without holder
• paired article number: 24.3571-1816.5
• Tootja: ATE

• Installatsiooni pool: esisild paremal
• Manufacturer Restriction: AKEBONO
• Brake Caliper Type: Fist-type Caliper
• Material: Cast Iron
• Piston Diameter [mm]: 57
• paired article number: BHX599E
• Exchange Part:
• Observe technical data:
• Tootja: TRW

SVHC: No information available, please contact the manufacturer!

• Installatsiooni pool: esisild vasakul
• Manufacturer Restriction: AKEBONO
• Brake Caliper Type: Fist-type Caliper
• Material: Cast Iron
• Piston Diameter [mm]: 57
• paired article number: BHX600E
• Exchange Part:
• Observe technical data:
• Tootja: TRW

SVHC: No information available, please contact the manufacturer!

• Installatsiooni pool: Tagasild paremal
• Ehitusaasta kuni: 06.2012
• Manufacturer Restriction: AKEBONO
• Brake Caliper Type: Fist-type Caliper
• Material: Cast Iron
• Piston Diameter [mm]: 35
• for brake disc diameter [mm]: 302
• Exchange Part:
• paired article number: BHN1146E
• Observe technical data:
• Tootja: TRW

SVHC: No information available, please contact the manufacturer!