Tootekategooriad
Filter Pidurid Šassii Roolimine Jahutus/kliima Elektrisüsteem Lisad Jõuülekanne Väljalaskesüsteem Kere Süüte-/eelsüütesüsteem Mootor Klaasid/klaasipuhastus Valgustus Kütusesüsteemi seadmed Kabiinivarustus HooldusToode
Kirjeldus
Laoseis
Hind
(km-ga)
- Installatsiooni pool: Esisild
- Piduriketta liik: õhutusega
- Välisläbimõõt [mm]: 321
- Pidurikettajämedus [mm]: 30
- Aukude arv: 5
- Pealispind: kaetud
- Lisainfo: Brake Disc
- RPO koodi jaoks: J62
- Veljesuurus (toll): 18
- Installatsiooni pool: Esisild
- Piduriketta liik: sisemine õhutus
- Välisläbimõõt [mm]: 337
- Pidurikettajämedus [mm]: 30
- Aukude arv: 5
- Pealispind: kaetud
- Installatsiooni pool: Tagasild
- Piduriketta liik: täis
- Välisläbimõõt [mm]: 292
- Pidurikettajämedus [mm]: 12
- Aukude arv: 5
- Pealispind: kaetud
- Lisainfo: Brake Disc
- Piduriketta liik: täis
- Välisläbimõõt [mm]: 292
- Pidurikettajämedus [mm]: 12
-
Tsentri läbimõõt (mm): 67,
4 - Kõrgus (mm): 48
- Aukude arv: 5
- Ava Ø (mm): 120
- Installatsiooni pool: Tagasild
-
Miinimumjämedus (mm): 10,
5 - Nimetus: PIDURIKETAS
- Tootja: MAX
- Fitting Position: Rear Axle
- Bolt Hole Circle Ø [mm]: 67.4
- Height [mm]: 48
- Outer Diameter [mm]: 292
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 10.5
- Number of bores: 5
- Brake Disc Type: solid
- Test Mark: ECE R90 APPROVED
- Surface: Painted
- Tightening Torque [Nm]: 150
- Tootja: ASHIKA
- Installatsiooni pool: Tagasild
- Outer Diameter [mm]: 292
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 10.5
- Brake Disc Type: solid
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 120
- Height [mm]: 48
- Centering Diameter [mm]: 67.4
- Inner Diameter [mm]: 171.5
- Bore Ø [mm]: 16.3
- Tootja: DENCKERMANN ZAWIESZENIE
- Installatsiooni pool: Tagasild
- Outer Diameter [mm]: 315
- Brake Disc Thickness [mm]: 22.9
- Minimum thickness [mm]: 21.5
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 120
- Height [mm]: 48
- Centering Diameter [mm]: 67.4
- Test Mark: ECE R90
- Replace in pairs only:
- Required quantity: 2
-
Tootja: ABAKUS DEPO/
LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.
- Installatsiooni pool: Tagasild
- POC jaoks: J60
- Piduriketta liik: täis
- Välisläbimõõt [mm]: 292
- Pidurikettajämedus [mm]: 12
-
Tsentri läbimõõt (mm): 67,
4 - Kõrgus (mm): 48
- Aukude arv: 5
- Ava Ø (mm): 120
- Pealispind: värvitud
-
Miinimumjämedus (mm): 10,
5 - Nimetus: PIDURIKETAS
- Tootja: MAX
- Brake Disc Thickness [mm]: 12
- Rim Hole Number: 5
- Number of mounting bores: 1
- Thickness [mm]: 48
- Outer Diameter [mm]: 292
- Bolt Hole Circle Ø [mm]: 120
- Surface: Coated
- Brake Disc Type: solid
- Fitting Position: Rear Axle
- Minimum thickness [mm]: 10.5
- Centering Diameter [mm]: 67.5
- Weight [kg]: 5.74
- Tootja: BLUE PRINT
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Pidurikettajämedus [mm]: 12
- Veljeaukude hulk: 5
- Kinnitusaukude hulk: 1
- Jämedus/Tugevus (mm): 48
- Välisläbimõõt [mm]: 292
- Ava Ø (mm): 120
- Pealispind: kaetud
- Piduriketta liik: täis
- Installatsiooni pool: Tagasild
-
Miinimumjämedus (mm): 10,
5 -
Tsentri läbimõõt (mm): 67,
5 -
Kaal (kg): 5,
74 - Tootja: FEBI BILSTEIN
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Installatsiooni pool: Tagasild
- POC jaoks: J60
- Piduriketta liik: täis
- Aukude arv: 5
-
Kontrolltähistus: E1 90R-
02C0967/ 2532 -
Piirangutega toode/piirangu info 2: ilma rattalaagrita,
ilma ABS- anduriteta - Pealispind: õlitatud
- Töötlus: töötlemata
- Välisläbimõõt [mm]: 292
- Pidurikettajämedus [mm]: 12
-
Miinimumjämedus (mm): 10,
5 -
Tsentri läbimõõt (mm): 67,
4 - Kõrgus (mm): 48
- Tootja: DELPHI LOCKHEED HAMULCE
- Nimetus: DE BG4188
- Installatsiooni pool: Tagasild
- Veljesuurus (toll): 16
- Outer Diameter [mm]: 292
- Brake Disc Thickness [mm]: 12
- Brake Disc Type: solid
- Minimum thickness [mm]: 10.5
- Height [mm]: 48
- Bolt Hole Circle Ø [mm]: 120
- Centering Diameter [mm]: 67.4
-
Supplementary Article/Info 2: without wheel hub,
without wheel studs - Surface: Painted
- Number of Holes: 5
- Nimetus: PIDURIKETAS
- Tootja: QUARO
- Installatsiooni pool: Tagasild
- POC jaoks: J60
- Brake Disc Type: solid
- Surface: Coated
- Colour: grey
- Supplementary Article/Info 2: without bearing
- Outer Diameter [mm]: 292
- Brake Disc Thickness [mm]: 12
- Height [mm]: 48
- Centering Diameter [mm]: 67.4
- Bolt Ø [mm]: 120
- Minimum thickness [mm]: 10.5
- Number of Holes: 5
- Tootja: BRECK TARCZE HAMULCOWE
- Piduriketta liik: õhutusega
- Välisläbimõõt [mm]: 315
- Pidurikettajämedus [mm]: 23
- Aukude arv: 5
- Kõrgus (mm): 48
- Tsentri läbimõõt (mm): 67
- Ava Ø (mm): 120
- Installatsiooni pool: Tagasild
-
Miinimumjämedus (mm): 21,
5 - Nimetus: PIDURIKETAS
- Tootja: MAX
- Pidurikettajämedus [mm]: 12
- Veljeaukude hulk: 5
- Kinnitusaukude hulk: 1
- Jämedus/Tugevus (mm): 48
- Välisläbimõõt [mm]: 292
- Ava Ø (mm): 120
- Pealispind: kaetud
- Piduriketta liik: täis
- Installatsiooni pool: Tagasild
-
Miinimumjämedus (mm): 10,
5 -
Tsentri läbimõõt (mm): 67,
5 -
Kaal (kg): 5,
74 - Nimetus: SW 40 93 9187
- Tootja: SWAG
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Installatsiooni pool: Tagasild
-
POC jaoks: J61,
J62 -
Veljesuurus (toll): 17,
0, 18, 0 - Kõrgus (mm): 48
-
Tsentri läbimõõt (mm): 67,
3 - Piduriketta liik: sisemine õhutus
- Pidurikettajämedus [mm]: 23
-
Miinimumjämedus (mm): 21,
5 - Välisläbimõõt [mm]: 315
- Aukude arv: 5
- Tootja: LPR
- Installatsiooni pool: Tagasild
-
POC jaoks: J61,
J62 - Piduriketta liik: õhutusega
- Välisläbimõõt [mm]: 280
- Pidurikettajämedus [mm]: 23
- Aukude arv: 5
- Kõrgus (mm): 48
- Tsentri läbimõõt (mm): 67
- Ava Ø (mm): 120
- Pealispind: värvitud
-
Miinimumjämedus (mm): 21,
5 - Nimetus: PIDURIKETAS
- Tootja: MAX
- Installatsiooni pool: Esisild
- Piduriketta liik: õhutusega
- Välisläbimõõt [mm]: 296
- Pidurikettajämedus [mm]: 30
- Aukude arv: 5
-
Kõrgus (mm): 51,
5 -
Tsentri läbimõõt (mm): 67,
4 - Ava Ø (mm): 120
- Miinimumjämedus (mm): 27
- Nimetus: PIDURIKETAS
- Tootja: MAX
- Installatsiooni pool: Tagasild
- Outer Diameter [mm]: 315
- Brake Disc Thickness [mm]: 22.9
- Minimum thickness [mm]: 21.5
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 120
- Height [mm]: 48
- Centering Diameter [mm]: 67.4
- Inner Diameter [mm]: 172
- Bore Ø [mm]: 16.3
- Tootja: DENCKERMANN ZAWIESZENIE
- Installatsiooni pool: Esisild
- Piduriketta liik: õhutusega
- Välisläbimõõt [mm]: 321
- Pidurikettajämedus [mm]: 30
- Aukude arv: 5
- Kõrgus (mm): 51
-
Tsentri läbimõõt (mm): 67,
4 - Ava Ø (mm): 120
- Miinimumjämedus (mm): 27
- Nimetus: PIDURIKETAS
- Tootja: MAX
- Installatsiooni pool: Tagasild
- POC jaoks: J60
- Piduriketta liik: täis
- Välisläbimõõt [mm]: 292
- Pidurikettajämedus [mm]: 12
-
Miinimumjämedus (mm): 10,
5 -
Tsentri läbimõõt (mm): 67,
4 - Kõrgus (mm): 48
- Aukude arv: 5
-
Keermemõõt: 16,
3 - Ava Ø (mm): 120
- Värv: must
- Pealispind: värvitud
-
Kontrolltähistus: E1 90R 02C0190/
0559 -
SVHC: Infot ei ole,
palun pöörduge tootja poole! - Nimetus: PIDURIKETAS
- Tootja: TRW
- Pidurikettajämedus [mm]: 23
- Veljeaukude hulk: 5
- Kinnitusaukude hulk: 1
- Jämedus/Tugevus (mm): 48
- Välisläbimõõt [mm]: 315
- Ava Ø (mm): 120
- Pealispind: kaetud
- Piduriketta liik: sisemine õhutus
- Installatsiooni pool: Tagasild
-
Miinimumjämedus (mm): 21,
5 -
Tsentri läbimõõt (mm): 67,
4 -
Kaal (kg): 8,
33 - Tootja: FEBI BILSTEIN
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Bolt Hole Circle Ø [mm]: 67
- Height [mm]: 48
- Outer Diameter [mm]: 315
- Brake Disc Thickness [mm]: 23
- Minimum thickness [mm]: 21
- Number of bores: 5
- Brake Disc Type: Vented
- Surface: Painted
- Tootja: JAPKO
- Installatsiooni pool: Tagasild
- Pidurisuurus: 16"
- Piduriketta liik: täis
- Välisläbimõõt [mm]: 292
- Pidurikettajämedus [mm]: 12
- Kõrgus (mm): 48
-
Miinimumjämedus (mm): 10,
5 - Pealispind: kaetud
-
Siseläbimõõt [mm]: 171,
7 - Ava Ø (mm): 120
-
Tsentri läbimõõt (mm): 67,
4 -
Puurpilt/auguarv: 05/
06 -
Ø auguga kinnitus polt ratta [mm]: 16,
3 -
Kaal (kg): 5,
5 - Nimetus: HE 8DD355116831
- Tootja: HELLA PAGID
Piirangutega toode/piirangu info 2: ilma rattakeskmeta, ilma rattalaagrita, ilma rattakinnituspoltideta
- Installatsiooni pool: Tagasild
-
POC jaoks: J61/
J62 - Piduriketta liik: õhutusega
- Aukude arv: 5
-
Kontrolltähistus: E1 90R-
02C0957/ 2540 -
Piirangutega toode/piirangu info 2: ilma rattalaagrita,
ilma ABS- anduriteta - Pealispind: õlitatud
- Töötlus: töötlemata
- Välisläbimõõt [mm]: 315
- Pidurikettajämedus [mm]: 23
-
Miinimumjämedus (mm): 21,
5 -
Tsentri läbimõõt (mm): 67,
4 - Kõrgus (mm): 48
- Tootja: DELPHI LOCKHEED HAMULCE
- Nimetus: DE BG4190
- Installatsiooni pool: Esisild
- Outer Diameter [mm]: 296
- Brake Disc Thickness [mm]: 30
- Minimum thickness [mm]: 27
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 120
- Height [mm]: 51
- Centering Diameter [mm]: 67.4
- Inner Diameter [mm]: 163.7
- Bore Ø [mm]: 16.3
- Tootja: DENCKERMANN ZAWIESZENIE
- Pidurikettajämedus [mm]: 23
- Veljeaukude hulk: 5
- Kinnitusaukude hulk: 1
- Jämedus/Tugevus (mm): 48
- Välisläbimõõt [mm]: 315
- Ava Ø (mm): 120
- Pealispind: kaetud
- Piduriketta liik: sisemine õhutus
- Installatsiooni pool: Tagasild
-
Miinimumjämedus (mm): 21,
5 -
Tsentri läbimõõt (mm): 67,
4 -
Kaal (kg): 8,
33 - Nimetus: SW 40 93 9373
- Tootja: SWAG
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 12
- Outer Diameter [mm]: 292
- Height [mm]: 48
- Bolt Hole Circle Ø [mm]: 120
- Centering Diameter [mm]: 67.4
- Surface: Painted
- Rim Hole Number: 5
- Nimetus: Piduriketas
- Tootja: QUARO
- Pidurisuurus: 16"
- POC jaoks: J60
- Installatsiooni pool: Tagasild
- Välisläbimõõt [mm]: 292
- Kõrgus (mm): 48
- Pidurikettajämedus [mm]: 12
-
Miinimumjämedus (mm): 10,
5 -
Tsentri läbimõõt (mm): 67,
3 - Ava Ø (mm): 120
-
Ø auguga kinnitus polt ratta [mm]: 16,
3 - Aukude arv: 5
- Piduriketta liik: täis
-
Pealispind: Tsink-
lamell- kattega - vajaminev tükihulk: 2
- Nimetus: PIDURIKETAS
- Tootja: MEY
Üldine informatsioon: MEYLE-PD brake disc with high-grade finish and brillant appearance: Modern cutting-edge coating technology for long lasting anti-corrosion protection. No degreasing needed, ready-to-fit. Easy rim disassembly due to coated mounting surfaces.
- Installatsiooni pool: Tagasild
- Sõidukitüüp: RPO J60
- Veljesuurus (toll): 16
- Piduriketta liik: täis
- Pidurikettajämedus [mm]: 12
- Aukude arv: 5
- Kõrgus (mm): 48
- Tsentri läbimõõt (mm): 67
- Välisläbimõõt [mm]: 292
- Pealispind: kaetud
-
Miinimumjämedus (mm): 10,
5 - Väändejõud [Nm]: 150
- Tootja: BREMBO
- Nimetus: BR 08.A970.11
- Kvaliteediklass: Q
- Brake Disc Thickness [mm]: 30
- Rim Hole Number: 5
- Number of mounting bores: 1
- Thickness [mm]: 51
- Outer Diameter [mm]: 296
- Bolt Hole Circle Ø [mm]: 120
- Surface: Coated
- Brake Disc Type: internally vented
- Fitting Position: Front Axle
- Minimum thickness [mm]: 27
- Centering Diameter [mm]: 67.4
- Weight [kg]: 8.68
- Tootja: BLUE PRINT
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Installatsiooni pool: Esisild
- POC jaoks: J60
- Piduriketta liik: õhutusega
- Aukude arv: 5
-
Kontrolltähistus: E1 90R-
02C0277/ 1470 -
Piirangutega toode/piirangu info 2: ilma rattalaagrita,
ilma ABS- anduriteta - Pealispind: kaetud
- Töötlus: töötlemata
- Välisläbimõõt [mm]: 296
- Pidurikettajämedus [mm]: 30
- Miinimumjämedus (mm): 27
-
Tsentri läbimõõt (mm): 67,
4 - Kõrgus (mm): 51
- Tootja: DELPHI LOCKHEED HAMULCE
- Nimetus: DE BG4187C
- Pidurikettajämedus [mm]: 30
- Veljeaukude hulk: 5
- Kinnitusaukude hulk: 1
-
Jämedus/Tugevus (mm): 50,
9 - Välisläbimõõt [mm]: 321
- Ava Ø (mm): 120
- Pealispind: kaetud
- Piduriketta liik: sisemine õhutus
- Installatsiooni pool: Esisild
- Miinimumjämedus (mm): 27
- Tsentri läbimõõt (mm): 67
-
Kaal (kg): 9,
92 - Tootja: FEBI BILSTEIN
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Brake Disc Thickness [mm]: 30
- Rim Hole Number: 5
- Number of mounting bores: 1
- Thickness [mm]: 51
- Outer Diameter [mm]: 321
- Bolt Hole Circle Ø [mm]: 120
- Surface: Coated
- Brake Disc Type: internally vented
- Fitting Position: Front Axle
- Minimum thickness [mm]: 27
- Centering Diameter [mm]: 67
- Weight [kg]: 9.92
- Tootja: BLUE PRINT
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
POC jaoks: J61,
J62 - Tunnussuurus: DP1010.11.1491
- Rim Hole Number: 5
- Fitting Position: Rear Axle
- Height [mm]: 48
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 23
- Minimum thickness [mm]: 21.5
- Outer Diameter [mm]: 315
- Number of Holes: 1
- Centering Diameter [mm]: 67.4
- Tootja: DRIVE
- Installatsiooni pool: Esisild
- POC jaoks: J60
-
Veljesuurus (toll): 16,
0 - Miinimumjämedus (mm): 27
- Välisläbimõõt [mm]: 296
-
Tsentri läbimõõt (mm): 67,
3 - Aukude arv: 5
- Pidurikettajämedus [mm]: 30
- Kõrgus (mm): 51
- Piduriketta liik: sisemine õhutus
- Tootja: LPR
- Installatsiooni pool: Tagasild
-
POC jaoks: J61,
J62 - Piduriketta liik: õhutusega
- Välisläbimõõt [mm]: 315
- Pidurikettajämedus [mm]: 23
-
Miinimumjämedus (mm): 21,
5 - Aukude arv: 5
- Kõrgus (mm): 48
- Tsentri läbimõõt (mm): 67
- Ava Ø (mm): 120
-
Keermemõõt: 16,
3 - Värv: must
- Pealispind: värvitud
-
Kontrolltähistus: E190R-
02 C0176/ 0611 -
SVHC: Infot ei ole,
palun pöörduge tootja poole! - Nimetus: PIDURIKETAS
- Tootja: TRW
- Kvaliteediklass: Q
- Pidurikettajämedus [mm]: 30
- Veljeaukude hulk: 5
- Kinnitusaukude hulk: 1
- Jämedus/Tugevus (mm): 51
- Välisläbimõõt [mm]: 296
- Ava Ø (mm): 120
- Pealispind: kaetud
- Piduriketta liik: sisemine õhutus
- Installatsiooni pool: Esisild
- Miinimumjämedus (mm): 27
-
Tsentri läbimõõt (mm): 67,
4 -
Kaal (kg): 8,
68 - Tootja: FEBI BILSTEIN
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Installatsiooni pool: Tagasild
- Veljesuurus (toll): 18
- Outer Diameter [mm]: 315
- Brake Disc Thickness [mm]: 23
- Brake Disc Type: internally vented
- Minimum thickness [mm]: 21.5
- Height [mm]: 48
- Bolt Hole Circle Ø [mm]: 120
- Centering Diameter [mm]: 67.4
-
Supplementary Article/Info 2: without wheel hub,
without wheel studs - Surface: Painted
- Number of Holes: 5
- Nimetus: PIDURIKETAS
- Tootja: QUARO
- Installatsiooni pool: Tagasild
- Piduriketta liik: õhutusega
- Pealispind: kaetud
- Aukude arv: 5
- Ava Ø (mm): 120
- Kõrgus (mm): 51
- Välisläbimõõt [mm]: 321
- Tsentri läbimõõt (mm): 67
- Pidurikettajämedus [mm]: 30
- Tootja: KAMOKA UK£ADY HAMULCOWE
- Installatsiooni pool: Esisild
- POC jaoks: J61
- Piduriketta liik: õhutusega
- Aukude arv: 5
-
Kontrolltähistus: E1 90R-
02C0074/ 1596 -
Piirangutega toode/piirangu info 2: ilma rattalaagrita,
ilma ABS- anduriteta - Pealispind: kaetud
- Töötlus: töötlemata
- Välisläbimõõt [mm]: 321
- Pidurikettajämedus [mm]: 30
- Miinimumjämedus (mm): 27
-
Tsentri läbimõõt (mm): 67,
4 -
Kõrgus (mm): 50,
9 - Tootja: DELPHI LOCKHEED HAMULCE
- Nimetus: DE BG4189C
- Pidurikettajämedus [mm]: 30
- Veljeaukude hulk: 5
- Kinnitusaukude hulk: 1
- Jämedus/Tugevus (mm): 51
- Välisläbimõõt [mm]: 296
- Ava Ø (mm): 120
- Pealispind: kaetud
- Piduriketta liik: sisemine õhutus
- Installatsiooni pool: Esisild
- Miinimumjämedus (mm): 27
-
Tsentri läbimõõt (mm): 67,
4 -
Kaal (kg): 8,
68 - Nimetus: SW 40 93 9195
- Tootja: SWAG
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- POC jaoks: J60
- Tunnussuurus: DP1010.11.0617
- Rim Hole Number: 5
- Fitting Position: Front Axle
- Height [mm]: 51
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 30
- Minimum thickness [mm]: 27
- Outer Diameter [mm]: 296
- Number of Holes: 1
- Centering Diameter [mm]: 67.4
- Tootja: DRIVE
- Pidurikettajämedus [mm]: 30
- Veljeaukude hulk: 5
- Kinnitusaukude hulk: 1
-
Jämedus/Tugevus (mm): 50,
9 - Välisläbimõõt [mm]: 321
- Ava Ø (mm): 120
- Pealispind: kaetud
- Piduriketta liik: sisemine õhutus
- Installatsiooni pool: Esisild
- Miinimumjämedus (mm): 27
- Tsentri läbimõõt (mm): 67
-
Kaal (kg): 9,
92 - Nimetus: SW 40 93 9196
- Tootja: SWAG
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Veljesuurus (toll): 16
- Outer Diameter [mm]: 296
- Brake Disc Thickness [mm]: 30
- Brake Disc Type: internally vented
- Fitting Position: Front Axle
- Minimum thickness [mm]: 27
- Height [mm]: 51
- Bolt Hole Circle Ø [mm]: 120
- Centering Diameter [mm]: 67.4
-
Supplementary Article/Info 2: without wheel hub,
without wheel studs - Surface: Painted
- Number of Holes: 5
- Nimetus: PIDURIKETAS
- Tootja: QUARO
-
Pidurisuurus: 17",
17+, 18+ -
POC jaoks: J61,
J62, J64 - Installatsiooni pool: Tagasild
- Välisläbimõõt [mm]: 315
- Kõrgus (mm): 48
- Pidurikettajämedus [mm]: 23
-
Miinimumjämedus (mm): 21,
5 -
Tsentri läbimõõt (mm): 67,
3 - Ava Ø (mm): 120
-
Ø auguga kinnitus polt ratta [mm]: 16,
3 - Aukude arv: 5
- Piduriketta liik: õhutusega
-
Pealispind: Tsink-
lamell- kattega - vajaminev tükihulk: 2
- Nimetus: PIDURIKETAS
- Tootja: MEY
Üldine informatsioon: MEYLE-PD brake disc with high-grade finish and brillant appearance: Modern cutting-edge coating technology for long lasting anti-corrosion protection. No degreasing needed, ready-to-fit. Easy rim disassembly due to coated mounting surfaces.
- Installatsiooni pool: Tagasild
-
POC jaoks: J61,
J62 -
Piduriketta liik: õhutusega,
piludega/ augustatud - Välisläbimõõt [mm]: 315
- Pidurikettajämedus [mm]: 23
- Aukude arv: 5
- Kõrgus (mm): 48
- Tsentri läbimõõt (mm): 67
- Ava Ø (mm): 120
- Pealispind: värvitud
-
Miinimumjämedus (mm): 21,
5 - Nimetus: PIDURIKETAS
- Tootja: MAX
- Installatsiooni pool: Tagasild
- Outer Diameter [mm]: 292
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 10.5
- Brake Disc Type: solid
- Surface: Coated
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 120
- Height [mm]: 48
- Centering Diameter [mm]: 67.4
- Inner Diameter [mm]: 171.5
- Bore Ø [mm]: 16.3
-
Supplementary Article/Info 2: with bolts/
screws - MAPP code available:
-
Test Mark: E1 90R-
02C0165/ 0907 - Nimetus: PIDURIKETAS
- Tootja: ATE
- Installatsiooni pool: Tagasild
- paaris tootenumbrid: 573313J
- Height [mm]: 48.2
- Weight [kg]: 11.15
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 10.5
- Outer Diameter [mm]: 292
- Number of Holes: 5
- Centering Diameter [mm]: 67.3
- Tightening Torque [Nm]: 150
- Surface: Coated
- Packing Type: Box
- Quantity Unit: Set
-
Supplementary Article/Info 2: with bolts/
screws - Version: JC
- Packaging length [cm]: 30
- Packaging width [cm]: 30
- Packaging height [cm]: 8.5
- Tootja: JURID
- Installatsiooni pool: Tagasild
-
Pidurisuurus: 17",
17+, 18+ - Piduriketta liik: sisemine õhutus
- Välisläbimõõt [mm]: 315
- Pidurikettajämedus [mm]: 23
- Kõrgus (mm): 48
-
Miinimumjämedus (mm): 21,
5 - Töötlus: hochgekohlt
- Pealispind: kaetud
-
Siseläbimõõt [mm]: 171,
8 - Ava Ø (mm): 120
-
Tsentri läbimõõt (mm): 67,
4 -
Puurpilt/auguarv: 05/
06 -
Ø auguga kinnitus polt ratta [mm]: 16,
3 - Kaal (kg): 8
- Nimetus: HE 8DD355129101
- Tootja: HELLA PAGID
Piirangutega toode/piirangu info 2: ilma rattakeskmeta, ilma rattalaagrita, ilma rattakinnituspoltideta
- POC jaoks: J62
- Installatsiooni pool: Esisild
- Veljeaukude hulk: 5
- Kõrgus (mm): 51
- Piduriketta liik: õhutusega
- Pidurikettajämedus [mm]: 30
- Miinimumjämedus (mm): 27
- Välisläbimõõt [mm]: 337
-
Tsentri läbimõõt (mm): 67,
4 - Ava Ø (mm): 120
- Piduriketta rummu kõrgus [mm]: 21
- Tootja: VAICO
Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Installatsiooni pool: Esisild
- POC jaoks: J61
-
Veljesuurus (toll): 17,
0 -
Tsentri läbimõõt (mm): 67,
3 - Aukude arv: 5
- Pidurikettajämedus [mm]: 30
- Piduriketta liik: sisemine õhutus
- Kõrgus (mm): 51
- Miinimumjämedus (mm): 27
- Välisläbimõõt [mm]: 321
- Tootja: LPR
- Installatsiooni pool: Esisild
- POC jaoks: J60
- Piduriketta liik: õhutusega
- Välisläbimõõt [mm]: 296
- Pidurikettajämedus [mm]: 30
- Miinimumjämedus (mm): 27
- Aukude arv: 5
-
Kõrgus (mm): 51,
5 -
Tsentri läbimõõt (mm): 67,
4 - Ava Ø (mm): 120
-
Keermemõõt: 16,
3 - Värv: must
- Pealispind: värvitud
- Töötlus: hochgekohlt
-
SVHC: Infot ei ole,
palun pöörduge tootja poole! - Nimetus: PIDURIKETAS
- Tootja: TRW
- Kvaliteediklass: Q
- Installatsiooni pool: Tagasild
- Veljesuurus (toll): 18
- Outer Diameter [mm]: 315
- Brake Disc Thickness [mm]: 23
- Brake Disc Type: internally vented
- Minimum thickness [mm]: 21.5
- Height [mm]: 48
- Bolt Hole Circle Ø [mm]: 120
- Centering Diameter [mm]: 67.4
-
Supplementary Article/Info 2: without wheel hub,
without wheel studs - Surface: Painted
-
Machining: High-
carbon - Number of Holes: 5
- Nimetus: Piduriketas
- Tootja: QUARO
- Installatsiooni pool: Esisild
- Pidurisuurus: 16"
- Piduriketta liik: sisemine õhutus
- Välisläbimõõt [mm]: 296
- Pidurikettajämedus [mm]: 30
- Kõrgus (mm): 51
- Miinimumjämedus (mm): 27
- Pealispind: kaetud
- Siseläbimõõt [mm]: 160
- Ava Ø (mm): 120
-
Tsentri läbimõõt (mm): 67,
4 -
Puurpilt/auguarv: 05/
06 -
Ø auguga kinnitus polt ratta [mm]: 16,
3 -
pakendi pikkus [cm]: 30,
8 -
pakendi laius [cm]: 30,
8 -
pakendi kõrgus [cm]: 12,
7 -
Kaal (kg): 8,
7 - Tootja: MINTEX
Piirangutega toode/piirangu info 2: ilma rattakeskmeta, ilma rattalaagrita, ilma rattakinnituspoltideta
- Installatsiooni pool: Esisild
- POC jaoks: J61
- Brake Disc Type: Vented
- Surface: Coated
- Colour: grey
- Supplementary Article/Info 2: without bearing
- Outer Diameter [mm]: 321
- Brake Disc Thickness [mm]: 30
- Height [mm]: 50.9
- Centering Diameter [mm]: 67.4
- Bolt Ø [mm]: 120
- Minimum thickness [mm]: 27
- Number of Holes: 5
- Tootja: BRECK TARCZE HAMULCOWE
- Installatsiooni pool: Esisild
- Veljesuurus (toll): 17
- Outer Diameter [mm]: 321
- Brake Disc Thickness [mm]: 30
- Brake Disc Type: internally vented
- Minimum thickness [mm]: 27
- Height [mm]: 51
- Bolt Hole Circle Ø [mm]: 120
- Centering Diameter [mm]: 67.4
-
Supplementary Article/Info 2: without wheel hub,
without wheel studs - Surface: Painted
- Number of Holes: 5
- Nimetus: PIDURIKETAS
- Tootja: QUARO
- Brake Disc Thickness [mm]: 30
- Rim Hole Number: 5
- Number of mounting bores: 1
- Thickness [mm]: 51
- Outer Diameter [mm]: 337
- Bolt Hole Circle Ø [mm]: 120
- Surface: Coated
- Brake Disc Type: internally vented
- Fitting Position: Front Axle
- Minimum thickness [mm]: 27
- Centering Diameter [mm]: 67.5
- Weight [kg]: 11.27
- Tootja: BLUEPRINT
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Veljesuurus (toll): 16
- Outer Diameter [mm]: 296
- Brake Disc Thickness [mm]: 30
- Brake Disc Type: internally vented
- Fitting Position: Front Axle
- Minimum thickness [mm]: 27
- Height [mm]: 51
- Bolt Hole Circle Ø [mm]: 120
- Centering Diameter [mm]: 67.4
-
Supplementary Article/Info 2: without wheel hub,
without wheel studs - Surface: Painted
-
Machining: High-
carbon - Number of Holes: 5
- Nimetus: Piduriketas
- Tootja: QUARO
- POC jaoks: J61
- Tunnussuurus: DP1010.11.0618
- Fitting Position: Front Axle
- Height [mm]: 50.9
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 30
- Minimum thickness [mm]: 27
- Number of bores: 5
- Outer Diameter [mm]: 321
- Centering Diameter [mm]: 67.4
- Tootja: DRIVE
- Pidurikettajämedus [mm]: 30
- Veljeaukude hulk: 5
- Kinnitusaukude hulk: 1
- Jämedus/Tugevus (mm): 51
- Välisläbimõõt [mm]: 337
- Ava Ø (mm): 120
- Pealispind: kaetud
- Piduriketta liik: sisemine õhutus
- Installatsiooni pool: Esisild
- Miinimumjämedus (mm): 27
-
Tsentri läbimõõt (mm): 67,
5 -
Kaal (kg): 11,
27 - Tootja: FEBI HAMULCE
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Installatsiooni pool: Tagasild
- Pidurisuurus: 16"
- Piduriketta liik: täis
- Välisläbimõõt [mm]: 292
- Pidurikettajämedus [mm]: 12
- Kõrgus (mm): 48
-
Miinimumjämedus (mm): 10,
5 - Pealispind: kaetud
-
Siseläbimõõt [mm]: 171,
7 - Ava Ø (mm): 120
-
Tsentri läbimõõt (mm): 67,
4 -
Puurpilt/auguarv: 05/
06 -
Ø auguga kinnitus polt ratta [mm]: 16,
3 -
pakendi pikkus [cm]: 30,
8 -
pakendi laius [cm]: 30,
8 -
pakendi kõrgus [cm]: 12,
7 -
Kaal (kg): 5,
5 - Nimetus: PIDURIKETAS
- Tootja: TEX
- Kvaliteediklass: Q
Piirangutega toode/piirangu info 2: ilma rattakeskmeta, ilma rattalaagrita, ilma rattakinnituspoltideta
- Installatsiooni pool: Esisild
- POC jaoks: J61
-
Piduriketta liik: õhutusega,
piludega/ augustatud - Välisläbimõõt [mm]: 321
- Pidurikettajämedus [mm]: 30
- Aukude arv: 5
- Kõrgus (mm): 51
-
Tsentri läbimõõt (mm): 67,
4 - Ava Ø (mm): 120
- Pealispind: värvitud
- Miinimumjämedus (mm): 27
- Nimetus: PIDURIKETAS
- Tootja: MAX
- Installatsiooni pool: Tagasild
-
Sõidukitüüp: J62,
RPO J61 -
Veljesuurus (toll): 17,
18 - Piduriketta liik: sisemine õhutus
- Pidurikettajämedus [mm]: 23
- Aukude arv: 5
- Piirangutega toode/piirangu info 2: koos kruvidega
- Kõrgus (mm): 48
- Tsentri läbimõõt (mm): 67
- Välisläbimõõt [mm]: 315
- Pealispind: kaetud
-
Miinimumjämedus (mm): 21,
5 - Väändejõud [Nm]: 150
- Nimetus: BR 09.A972.11
- Tootja: BREMBO
-
RPO koodi jaoks: J61/
J62, J64 -
Pidurisuurus: 17+,
18+ - Plokieraldus:
- Fitting Position: Rear Axle
- Brake Disc Type: internally vented
-
Surface: Painted,
Cross- hatch - Outer Diameter [mm]: 315
- Brake Disc Thickness [mm]: 23
- Minimum thickness [mm]: 21.5
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 120
- Height [mm]: 48
- Centering Diameter [mm]: 67.4
- Inner Diameter [mm]: 164
- Tootja: METZGER
- Installatsiooni pool: Esisild
- Sõidukitüüp: RPO J60
- Veljesuurus (toll): 16
- Piduriketta liik: sisemine õhutus
- Pidurikettajämedus [mm]: 30
- Aukude arv: 5
- Kõrgus (mm): 51
- Tsentri läbimõõt (mm): 67
- Välisläbimõõt [mm]: 296
- Pealispind: kaetud
- Miinimumjämedus (mm): 27
- Väändejõud [Nm]: 150
- Tootja: BREMBO
- Nimetus: BR 09.A969.11
- Installatsiooni pool: Esisild
- POC jaoks: J61
- Piduriketta liik: õhutusega
- Välisläbimõõt [mm]: 321
- Pidurikettajämedus [mm]: 30
- Miinimumjämedus (mm): 27
- Aukude arv: 5
- Kõrgus (mm): 51
-
Tsentri läbimõõt (mm): 67,
4 - Ava Ø (mm): 120
-
Keermemõõt: 16,
3 - Värv: must
- Pealispind: värvitud
- Töötlus: hochgekohlt
-
Kontrolltähistus: E1 90R 02 C0176/
0558 -
SVHC: Infot ei ole,
palun pöörduge tootja poole! - Nimetus: PIDURIKETAS
- Tootja: TRW
- Kvaliteediklass: Q
- Installatsiooni pool: Esisild
- Veljesuurus (toll): 17
- Outer Diameter [mm]: 321
- Brake Disc Thickness [mm]: 30
- Brake Disc Type: internally vented
- Minimum thickness [mm]: 27
- Height [mm]: 51
- Bolt Hole Circle Ø [mm]: 120
- Centering Diameter [mm]: 67.4
-
Supplementary Article/Info 2: without wheel hub,
without wheel studs - Surface: Painted
-
Machining: High-
carbon - Number of Holes: 5
- Nimetus: Piduriketas
- Tootja: QUARO
- Installatsiooni pool: Esisild
- Pidurisuurus: 17"
- Piduriketta liik: sisemine õhutus
- Välisläbimõõt [mm]: 321
- Pidurikettajämedus [mm]: 30
- Kõrgus (mm): 51
- Miinimumjämedus (mm): 27
- Pealispind: kaetud
-
Siseläbimõõt [mm]: 159,
8 - Ava Ø (mm): 120
-
Tsentri läbimõõt (mm): 67,
4 -
Puurpilt/auguarv: 05/
06 -
Ø auguga kinnitus polt ratta [mm]: 16,
3 -
pakendi pikkus [cm]: 34,
3 -
pakendi laius [cm]: 34,
3 -
pakendi kõrgus [cm]: 7,
5 -
Kaal (kg): 9,
8 - Tootja: MINTEX
Piirangutega toode/piirangu info 2: ilma rattakeskmeta, ilma rattalaagrita, ilma rattakinnituspoltideta
- Pidurisuurus: 16"
- POC jaoks: J60
- Installatsiooni pool: Esisild
- Välisläbimõõt [mm]: 296
- Kõrgus (mm): 51
- Pidurikettajämedus [mm]: 30
- Miinimumjämedus (mm): 27
-
Tsentri läbimõõt (mm): 67,
3 - Ava Ø (mm): 120
-
Ø auguga kinnitus polt ratta [mm]: 16,
3 - Aukude arv: 5
- Piduriketta liik: õhutusega
-
Pealispind: Tsink-
lamell- kattega - Töötlus: hochgekohlt
- vajaminev tükihulk: 2
- Nimetus: PIDURIKETAS
- Tootja: MEY
Üldine informatsioon: High-carbon MEYLE-PD brake disc. Increased carbon content of brake disc material to 3.6-3.9% due to a special high carbonization process. The result: Better warping resistance because of increased thermal conductivity.
- Installatsiooni pool: Esisild
- Välisläbimõõt [mm]: 337
- Pidurikettajämedus [mm]: 30
- Miinimumjämedus (mm): 27
- Kõrgus (mm): 51
- Ava Ø (mm): 120
- Piduriketta liik: õhutusega
-
Tsentri läbimõõt (mm): 67,
4 - Aukude arv: 5
- Pealispind: kaetud
- Töötlus: hochgekohlt
- Piirangutega toode/piirangu info 2: koos kruvidega
-
täidab ECE-normi: ECE-
R90 -
Ava läbimõõt kuni [mm]: 16,
3 - Nimetus: PIDURIKETAS
- Tootja: BOS
- Pidurisuurus: 17"
- POC jaoks: J61
- Installatsiooni pool: Esisild
- Välisläbimõõt [mm]: 321
- Kõrgus (mm): 51
- Pidurikettajämedus [mm]: 30
- Miinimumjämedus (mm): 27
-
Tsentri läbimõõt (mm): 67,
3 - Ava Ø (mm): 120
-
Ø auguga kinnitus polt ratta [mm]: 16,
3 - Aukude arv: 5
- Piduriketta liik: õhutusega
-
Pealispind: Tsink-
lamell- kattega - Töötlus: hochgekohlt
- vajaminev tükihulk: 2
- Nimetus: PIDURIKETAS
- Tootja: MEY
Üldine informatsioon: High-carbon MEYLE-PD brake disc. Increased carbon content of brake disc material to 3.6-3.9% due to a special high carbonization process. The result: Better warping resistance because of increased thermal conductivity.
- Installatsiooni pool: Esisild
- POC jaoks: J62
- Pealispind: värvitud
- Piduriketta liik: õhutusega
- Välisläbimõõt [mm]: 337
- Pidurikettajämedus [mm]: 30
- Miinimumjämedus (mm): 27
-
Kõrgus (mm): 50,
1 - Aukude arv: 5
-
Tsentri läbimõõt (mm): 67,
4 - Ava Ø (mm): 120
- Värv: must
-
Kontrolltähistus: E1 90R-
02 C0176/ 0601 -
SVHC: Infot ei ole,
palun pöörduge tootja poole! - Nimetus: PIDURIKETAS
- Tootja: TRW
- Outer Diameter [mm]: 337
- Brake Disc Thickness [mm]: 30
- Brake Disc Type: Vented
- Fitting Position: Front Axle
- Minimum thickness [mm]: 27
- Height [mm]: 51
- Bolt Hole Circle Ø [mm]: 120
- Centering Diameter [mm]: 67.4
- Number of Holes: 5
- Surface: Painted
-
Machining: High-
carbon - Nimetus: Piduriketas
- Tootja: QUARO
- Installatsiooni pool: Tagasild
- Outer Diameter [mm]: 292
- Brake Disc Thickness [mm]: 12
- Minimum thickness [mm]: 10.5
- Brake Disc Type: solid
- Surface: Coated
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 120
- Height [mm]: 48
- Centering Diameter [mm]: 67.4
- Inner Diameter [mm]: 171.5
- Bore Ø [mm]: 16.3
-
Supplementary Article/Info 2: with bolts/
screws - MAPP code available:
- Nimetus: PIDURIKETAS
- Tootja: ATE
General Information: Sure Thing, ATE! The PowerDisc shows what it can do. Looks better - wears less The brake disc with a profile pays off: The cleaning effect of the continuous groove ensures more even wear of the brake disc and a marked reduction in the scoring that can occur on both brake disc and brake pads. Score-free wear even in heavy-duty use extends the life of the brake discs - and also offers better looks, particularly for wheel rims of today's modern and open style. The multipurpose groove permits visual detection of wear at a glance, without awkward, time-consuming and expensive removal or special measuring tools. If the entire groove has been worn away, the brake disc has reached its thickness limit and must be replaced. The high temperatures generated during braking result in gases between the brake disc and brake pad. These gases c onsiderably impair the braking effect (fading). The PowerDisc channels off the gases via the multifunctional groove and in so doing ensures dependable braking. This brake disc has been thought out down to the last detail : Conventional brake discs have to be cleaned before assembly in an often very expensive and time consuming process using environmentally harmful agents. Poor cleaning often causes permanent impairment of the friction between the brake pads and the brake disc. The new corrosion protection on the ATE PowerDisc, however, no longer has to be removed before assembly and so remains on the brake disc. Protected and sealed in this way, the ATE PowerDisc is less prone to rust, shortens the installation time, and helps protect the enviro nment. Many benefits - thanks to corrosion protection The ATE PowerDisc is certified for general use in Germany (ABE) - i.e. no entry in the vehicle documents is needed. That saves you time and money. Braking like the professionals The complete range Greater safety and longer life make the ATE PowerDisc a disc that could well be a big success, which you can have installed by your garage right away. And if you have any other questions to do with brakes and the ATE product range, your friendly brake expert there will only be too glad to help you. Our ATE PowerDisc has already been proven in many long-distance racing events and touring car championships. And with its outstanding braking characteristics on both dry and wet surfaces, it's the ideal choice for the New Beetle and Lupo Cups, and in the Formula König and Formula 3. Everything's in favour of the ATE PowerDisc: Water and dirt can considerably reduce the effectiveness of the brake pads. Our answer is: the innovative ATE PowerDisc, the only brake disc with a continuous multipurpose groove, which channels off water, dirt and the gases generated between the brake disc and the brake pads by high temperatures during braking, rather like the tread of a tyre does. This considerably increases your safety, reduces scoring, and extends the life of the brake disc. And besides braking so well, it looks better for a longer pe riod. The ATE PowerDisc with multipurpose groove has clear advantages: - general certification (ABE) - better response in wet conditions - shorter running-in period for the newly fitted pad and dis c - better appearance - wear detection - improved corrosion protection Technical Information: For vehicles without ABS, a PowerDisc can be used on the rea r axle only if there is one on the front axle. The General Operating Permit (ABE) for the PowerDisc applies to operation on German roads in accordance with the German Road Traffic Registration Ordinance (StVZO). Other countries may require additional type approvals for use on roads.
- Installatsiooni pool: Esisild
- Sõidukitüüp: RPO J61
- Veljesuurus (toll): 17
- Piduriketta liik: sisemine õhutus
- Pidurikettajämedus [mm]: 30
- Aukude arv: 5
- Piirangutega toode/piirangu info 2: koos kruvidega
- Kõrgus (mm): 51
- Tsentri läbimõõt (mm): 67
- Välisläbimõõt [mm]: 321
- Töötlus: hochgekohlt
- Pealispind: kaetud
- Miinimumjämedus (mm): 27
- Väändejõud [Nm]: 150
- Nimetus: BR 09.A971.11
- Tootja: BREMBO
- Pidurisuurus: 17+
- POC jaoks: J62
- Installatsiooni pool: Esisild
- Välisläbimõõt [mm]: 337
- Kõrgus (mm): 51
- Pidurikettajämedus [mm]: 30
- Miinimumjämedus (mm): 27
-
Tsentri läbimõõt (mm): 67,
3 - Ava Ø (mm): 120
-
Ø auguga kinnitus polt ratta [mm]: 16,
3 - Aukude arv: 5
- Piduriketta liik: õhutusega
-
Pealispind: Tsink-
lamell- kattega - Töötlus: hochgekohlt
- vajaminev tükihulk: 2
- Nimetus: PIDURIKETAS
- Tootja: MEY
Üldine informatsioon: High-carbon MEYLE-PD brake disc. Increased carbon content of brake disc material to 3.6-3.9% due to a special high carbonization process. The result: Better warping resistance because of increased thermal conductivity.
- Installatsiooni pool: Esisild
- Pidurisuurus: 17"
- Piduriketta liik: sisemine õhutus
- Välisläbimõõt [mm]: 321
- Pidurikettajämedus [mm]: 30
- Kõrgus (mm): 51
- Miinimumjämedus (mm): 27
- Töötlus: hochgekohlt
- Pealispind: kaetud
-
Siseläbimõõt [mm]: 159,
8 - Ava Ø (mm): 120
-
Tsentri läbimõõt (mm): 67,
4 -
Puurpilt/auguarv: 05/
06 -
Ø auguga kinnitus polt ratta [mm]: 16,
3 - Kruvide arv: 1
-
Kaal (kg): 9,
8 - Nimetus: HE 8DD355129091
- Tootja: HELLA PAGID
Piirangutega toode/piirangu info 2: ilma rattakeskmeta, ilma rattalaagrita, ilma rattakinnituspoltideta
- Installatsiooni pool: Tagasild
-
Pidurisuurus: 17",
17+, 18+ - Piduriketta liik: sisemine õhutus
- Välisläbimõõt [mm]: 315
- Pidurikettajämedus [mm]: 23
- Kõrgus (mm): 48
-
Miinimumjämedus (mm): 21,
5 - Pealispind: kaetud
-
Siseläbimõõt [mm]: 171,
8 - Ava Ø (mm): 120
-
Tsentri läbimõõt (mm): 67,
4 -
Puurpilt/auguarv: 05/
06 -
Ø auguga kinnitus polt ratta [mm]: 16,
3 -
pakendi pikkus [cm]: 32,
8 -
pakendi laius [cm]: 32,
8 -
pakendi kõrgus [cm]: 12,
5 - Kaal (kg): 8
- Nimetus: PIDURIKETAS
- Tootja: TEX
- Lisainfo: 92187303
Piirangutega toode/piirangu info 2: ilma rattakeskmeta, ilma rattalaagrita, ilma rattakinnituspoltideta
- Installatsiooni pool: Esisild
- Pidurisuurus: 17+
- Piduriketta liik: sisemine õhutus
- Välisläbimõõt [mm]: 337
- Pidurikettajämedus [mm]: 30
- Kõrgus (mm): 51
- Miinimumjämedus (mm): 27
- Pealispind: kaetud
- Ava Ø (mm): 120
-
Tsentri läbimõõt (mm): 67,
4 -
Puurpilt/auguarv: 05/
06 -
Piirangutega toode/piirangu info 2: ilma rattakeskmeta,
ilma rattakinnituspoltideta - Kaal (kg): 11
- Nimetus: HE 8DD355116051
- Tootja: HELLA PAGID
- Installatsiooni pool: Tagasild
- Outer Diameter [mm]: 315
- Brake Disc Thickness [mm]: 22.9
- Minimum thickness [mm]: 21.5
- Brake Disc Type: Vented
- Surface: Coated
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 120
- Height [mm]: 48
- Centering Diameter [mm]: 67.4
- Inner Diameter [mm]: 172
- Bore Ø [mm]: 16.3
-
Supplementary Article/Info 2: with bolts/
screws - MAPP code available:
-
Test Mark: E1 90R-
02C0115/ 1002 - Nimetus: PIDURIKETAS
- Tootja: ATE
- Kvaliteediklass: Q
- Installatsiooni pool: Esisild
- Sõidukitüüp: RPO J62
- Veljesuurus (toll): 18
- Piduriketta liik: sisemine õhutus
- Pidurikettajämedus [mm]: 30
- Aukude arv: 5
- Kõrgus (mm): 51
- Tsentri läbimõõt (mm): 68
- Välisläbimõõt [mm]: 337
- Töötlus: hochgekohlt
- Pealispind: kaetud
- Miinimumjämedus (mm): 27
- Väändejõud [Nm]: 150
- Nimetus: BR 09.B358.11
- Tootja: BREMBO
Lühiinformatsioon: PVT vented disc. The PVT disc uses, in its ventilation chamber, pillars instead of vanes. Disc cooling capacity is enhanced by an extra 40% and therefore provides more resistance against thermal cracking.
- Installatsiooni pool: Esisild
- Pidurisuurus: 16"
- Piduriketta liik: sisemine õhutus
- Välisläbimõõt [mm]: 296
- Pidurikettajämedus [mm]: 30
- Kõrgus (mm): 51
- Miinimumjämedus (mm): 27
- Töötlus: hochgekohlt
- Pealispind: kaetud
- Siseläbimõõt [mm]: 160
- Ava Ø (mm): 120
-
Tsentri läbimõõt (mm): 67,
4 -
Puurpilt/auguarv: 05/
06 -
Ø auguga kinnitus polt ratta [mm]: 16,
3 -
pakendi pikkus [cm]: 30,
8 -
pakendi laius [cm]: 30,
8 -
pakendi kõrgus [cm]: 12,
7 -
Kaal (kg): 8,
7 - Nimetus: Piduriketas
- Tootja: TEX
Piirangutega toode/piirangu info 2: ilma rattakeskmeta, ilma rattalaagrita, ilma rattakinnituspoltideta
- Installatsiooni pool: Esisild
- paaris tootenumbrid: 573269J
- Height [mm]: 51
- Weight [kg]: 17.8
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 30
- Minimum thickness [mm]: 28
- Outer Diameter [mm]: 296
- Number of Holes: 5
- Centering Diameter [mm]: 67.4
- Tightening Torque [Nm]: 150
- Surface: Coated
- Packing Type: Box
- Quantity Unit: Piece
-
Supplementary Article/Info 2: with bolts/
screws - Version: JC
- Packaging length [cm]: 31
- Packaging width [cm]: 31
- Packaging height [cm]: 7.5
- Tootja: JURID
- Installatsiooni pool: Esisild
- Outer Diameter [mm]: 337
- Brake Disc Thickness [mm]: 30
- Minimum thickness [mm]: 27
- Brake Disc Type: Vented
-
Machining: High-
carbon - Surface: Coated
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 120
- Height [mm]: 51
- Centering Diameter [mm]: 67.4
- Inner Diameter [mm]: 159.7
- Bore Ø [mm]: 16.3
-
Supplementary Article/Info 2: with bolts/
screws - MAPP code available:
-
Test Mark: E1 90R-
02C0115/ 0406 - Tootja: ATE
- Installatsiooni pool: Tagasild
- Outer Diameter [mm]: 315
- Brake Disc Thickness [mm]: 22.9
- Minimum thickness [mm]: 21.5
- Brake Disc Type: Vented
- Surface: Coated
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 120
- Height [mm]: 48
- Centering Diameter [mm]: 67.4
- Inner Diameter [mm]: 172
- Bore Ø [mm]: 16.3
-
Supplementary Article/Info 2: with bolts/
screws -
Test Mark: E1 90R-
02C0858/ 1215 - MAPP code available:
- Nimetus: PIDURIKETAS
- Tootja: ATE
General Information: Sure Thing, ATE! The PowerDisc shows what it can do. Looks better - wears less The brake disc with a profile pays off: The cleaning effect of the continuous groove ensures more even wear of the brake disc and a marked reduction in the scoring that can occur on both brake disc and brake pads. Score-free wear even in heavy-duty use extends the life of the brake discs - and also offers better looks, particularly for wheel rims of today's modern and open style. The multipurpose groove permits visual detection of wear at a glance, without awkward, time-consuming and expensive removal or special measuring tools. If the entire groove has been worn away, the brake disc has reached its thickness limit and must be replaced. The high temperatures generated during braking result in gases between the brake disc and brake pad. These gases c onsiderably impair the braking effect (fading). The PowerDisc channels off the gases via the multifunctional groove and in so doing ensures dependable braking. This brake disc has been thought out down to the last detail : Conventional brake discs have to be cleaned before assembly in an often very expensive and time consuming process using environmentally harmful agents. Poor cleaning often causes permanent impairment of the friction between the brake pads and the brake disc. The new corrosion protection on the ATE PowerDisc, however, no longer has to be removed before assembly and so remains on the brake disc. Protected and sealed in this way, the ATE PowerDisc is less prone to rust, shortens the installation time, and helps protect the enviro nment. Many benefits - thanks to corrosion protection The ATE PowerDisc is certified for general use in Germany (ABE) - i.e. no entry in the vehicle documents is needed. That saves you time and money. Braking like the professionals The complete range Greater safety and longer life make the ATE PowerDisc a disc that could well be a big success, which you can have installed by your garage right away. And if you have any other questions to do with brakes and the ATE product range, your friendly brake expert there will only be too glad to help you. Our ATE PowerDisc has already been proven in many long-distance racing events and touring car championships. And with its outstanding braking characteristics on both dry and wet surfaces, it's the ideal choice for the New Beetle and Lupo Cups, and in the Formula König and Formula 3. Everything's in favour of the ATE PowerDisc: Water and dirt can considerably reduce the effectiveness of the brake pads. Our answer is: the innovative ATE PowerDisc, the only brake disc with a continuous multipurpose groove, which channels off water, dirt and the gases generated between the brake disc and the brake pads by high temperatures during braking, rather like the tread of a tyre does. This considerably increases your safety, reduces scoring, and extends the life of the brake disc. And besides braking so well, it looks better for a longer pe riod. The ATE PowerDisc with multipurpose groove has clear advantages: - general certification (ABE) - better response in wet conditions - shorter running-in period for the newly fitted pad and dis c - better appearance - wear detection - improved corrosion protection Technical Information: For vehicles without ABS, a PowerDisc can be used on the rea r axle only if there is one on the front axle. The General Operating Permit (ABE) for the PowerDisc applies to operation on German roads in accordance with the German Road Traffic Registration Ordinance (StVZO). Other countries may require additional type approvals for use on roads.
- Installatsiooni pool: Esisild
- Pidurisuurus: 17"
- Piduriketta liik: sisemine õhutus
- Välisläbimõõt [mm]: 321
- Pidurikettajämedus [mm]: 30
- Kõrgus (mm): 51
- Miinimumjämedus (mm): 27
- Töötlus: hochgekohlt
- Pealispind: kaetud
-
Siseläbimõõt [mm]: 159,
8 - Ava Ø (mm): 120
-
Tsentri läbimõõt (mm): 67,
4 -
Puurpilt/auguarv: 05/
06 -
Ø auguga kinnitus polt ratta [mm]: 16,
3 -
pakendi pikkus [cm]: 34,
3 -
pakendi laius [cm]: 34,
3 -
pakendi kõrgus [cm]: 7,
5 -
Kaal (kg): 9,
8 - Nimetus: PIDURIKETAS
- Tootja: TEX
Piirangutega toode/piirangu info 2: ilma rattakeskmeta, ilma rattalaagrita, ilma rattakinnituspoltideta
- Installatsiooni pool: Esisild
- Outer Diameter [mm]: 296
- Brake Disc Thickness [mm]: 30
- Minimum thickness [mm]: 27
- Brake Disc Type: Vented
-
Machining: Alloyed/
High- carbon - Surface: Coated
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 120
- Height [mm]: 51
- Centering Diameter [mm]: 67.4
- Inner Diameter [mm]: 163.7
- Bore Ø [mm]: 16.3
-
Supplementary Article/Info 2: with bolts/
screws - MAPP code available:
-
Test Mark: E1 90R-
02C0115/ 0876 - Nimetus: PIDURIKETAS
- Tootja: ATE
- Installatsiooni pool: Esisild
- Outer Diameter [mm]: 321
- Brake Disc Thickness [mm]: 30
- Minimum thickness [mm]: 27
- Brake Disc Type: Vented
-
Machining: High-
carbon - Surface: Coated
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 120
- Height [mm]: 51
- Centering Diameter [mm]: 67.4
- Inner Diameter [mm]: 160
- Bore Ø [mm]: 16.3
-
Supplementary Article/Info 2: with bolts/
screws - MAPP code available:
-
Test Mark: E1 90R-
02C0115/ 0255 - Nimetus: PIDURIKETAS
- Tootja: ATE
- Kvaliteediklass: Q
- Installatsiooni pool: Esisild
- Pidurisuurus: 17+
- Piduriketta liik: sisemine õhutus
- Välisläbimõõt [mm]: 337
- Pidurikettajämedus [mm]: 30
- Kõrgus (mm): 51
- Miinimumjämedus (mm): 27
- Pealispind: kaetud
- Ava Ø (mm): 120
-
Tsentri läbimõõt (mm): 67,
4 -
Puurpilt/auguarv: 05/
06 -
Piirangutega toode/piirangu info 2: ilma rattakeskmeta,
ilma rattakinnituspoltideta -
pakendi pikkus [cm]: 35,
8 -
pakendi laius [cm]: 35,
8 -
pakendi kõrgus [cm]: 8,
5 - Kaal (kg): 11
- Nimetus: PIDURIKETAS
- Tootja: TEX
- Installatsiooni pool: Esisild
- Outer Diameter [mm]: 321
- Brake Disc Thickness [mm]: 30
- Minimum thickness [mm]: 27
- Brake Disc Type: Vented
-
Machining: High-
carbon - Surface: Coated
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 120
- Height [mm]: 51
- Centering Diameter [mm]: 67.4
- Inner Diameter [mm]: 160
- Bore Ø [mm]: 16.3
-
Supplementary Article/Info 2: with bolts/
screws - MAPP code available:
- Nimetus: Piduriketas
- Tootja: ATE
General Information: Sure Thing, ATE! The PowerDisc shows what it can do. Looks better - wears less The brake disc with a profile pays off: The cleaning effect of the continuous groove ensures more even wear of the brake disc and a marked reduction in the scoring that can occur on both brake disc and brake pads. Score-free wear even in heavy-duty use extends the life of the brake discs - and also offers better looks, particularly for wheel rims of today's modern and open style. The multipurpose groove permits visual detection of wear at a glance, without awkward, time-consuming and expensive removal or special measuring tools. If the entire groove has been worn away, the brake disc has reached its thickness limit and must be replaced. The high temperatures generated during braking result in gases between the brake disc and brake pad. These gases c onsiderably impair the braking effect (fading). The PowerDisc channels off the gases via the multifunctional groove and in so doing ensures dependable braking. This brake disc has been thought out down to the last detail : Conventional brake discs have to be cleaned before assembly in an often very expensive and time consuming process using environmentally harmful agents. Poor cleaning often causes permanent impairment of the friction between the brake pads and the brake disc. The new corrosion protection on the ATE PowerDisc, however, no longer has to be removed before assembly and so remains on the brake disc. Protected and sealed in this way, the ATE PowerDisc is less prone to rust, shortens the installation time, and helps protect the enviro nment. Many benefits - thanks to corrosion protection The ATE PowerDisc is certified for general use in Germany (ABE) - i.e. no entry in the vehicle documents is needed. That saves you time and money. Braking like the professionals The complete range Greater safety and longer life make the ATE PowerDisc a disc that could well be a big success, which you can have installed by your garage right away. And if you have any other questions to do with brakes and the ATE product range, your friendly brake expert there will only be too glad to help you. Our ATE PowerDisc has already been proven in many long-distance racing events and touring car championships. And with its outstanding braking characteristics on both dry and wet surfaces, it's the ideal choice for the New Beetle and Lupo Cups, and in the Formula König and Formula 3. Everything's in favour of the ATE PowerDisc: Water and dirt can considerably reduce the effectiveness of the brake pads. Our answer is: the innovative ATE PowerDisc, the only brake disc with a continuous multipurpose groove, which channels off water, dirt and the gases generated between the brake disc and the brake pads by high temperatures during braking, rather like the tread of a tyre does. This considerably increases your safety, reduces scoring, and extends the life of the brake disc. And besides braking so well, it looks better for a longer pe riod. The ATE PowerDisc with multipurpose groove has clear advantages: - general certification (ABE) - better response in wet conditions - shorter running-in period for the newly fitted pad and dis c - better appearance - wear detection - improved corrosion protection Technical Information: For vehicles without ABS, a PowerDisc can be used on the rea r axle only if there is one on the front axle. The General Operating Permit (ABE) for the PowerDisc applies to operation on German roads in accordance with the German Road Traffic Registration Ordinance (StVZO). Other countries may require additional type approvals for use on roads.
- Installatsiooni pool: Esisild
- Outer Diameter [mm]: 296
- Brake Disc Thickness [mm]: 30
- Minimum thickness [mm]: 27
- Brake Disc Type: Vented
-
Machining: Alloyed/
High- carbon - Surface: Coated
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 120
- Height [mm]: 51
- Centering Diameter [mm]: 67.4
- Inner Diameter [mm]: 163.7
- Bore Ø [mm]: 16.3
-
Supplementary Article/Info 2: with bolts/
screws - MAPP code available:
- Nimetus: PIDURIKETAS
- Tootja: ATE
General Information: Sure Thing, ATE! The PowerDisc shows what it can do. Looks better - wears less The brake disc with a profile pays off: The cleaning effect of the continuous groove ensures more even wear of the brake disc and a marked reduction in the scoring that can occur on both brake disc and brake pads. Score-free wear even in heavy-duty use extends the life of the brake discs - and also offers better looks, particularly for wheel rims of today's modern and open style. The multipurpose groove permits visual detection of wear at a glance, without awkward, time-consuming and expensive removal or special measuring tools. If the entire groove has been worn away, the brake disc has reached its thickness limit and must be replaced. The high temperatures generated during braking result in gases between the brake disc and brake pad. These gases c onsiderably impair the braking effect (fading). The PowerDisc channels off the gases via the multifunctional groove and in so doing ensures dependable braking. This brake disc has been thought out down to the last detail : Conventional brake discs have to be cleaned before assembly in an often very expensive and time consuming process using environmentally harmful agents. Poor cleaning often causes permanent impairment of the friction between the brake pads and the brake disc. The new corrosion protection on the ATE PowerDisc, however, no longer has to be removed before assembly and so remains on the brake disc. Protected and sealed in this way, the ATE PowerDisc is less prone to rust, shortens the installation time, and helps protect the enviro nment. Many benefits - thanks to corrosion protection The ATE PowerDisc is certified for general use in Germany (ABE) - i.e. no entry in the vehicle documents is needed. That saves you time and money. Braking like the professionals The complete range Greater safety and longer life make the ATE PowerDisc a disc that could well be a big success, which you can have installed by your garage right away. And if you have any other questions to do with brakes and the ATE product range, your friendly brake expert there will only be too glad to help you. Our ATE PowerDisc has already been proven in many long-distance racing events and touring car championships. And with its outstanding braking characteristics on both dry and wet surfaces, it's the ideal choice for the New Beetle and Lupo Cups, and in the Formula König and Formula 3. Everything's in favour of the ATE PowerDisc: Water and dirt can considerably reduce the effectiveness of the brake pads. Our answer is: the innovative ATE PowerDisc, the only brake disc with a continuous multipurpose groove, which channels off water, dirt and the gases generated between the brake disc and the brake pads by high temperatures during braking, rather like the tread of a tyre does. This considerably increases your safety, reduces scoring, and extends the life of the brake disc. And besides braking so well, it looks better for a longer pe riod. The ATE PowerDisc with multipurpose groove has clear advantages: - general certification (ABE) - better response in wet conditions - shorter running-in period for the newly fitted pad and dis c - better appearance - wear detection - improved corrosion protection Technical Information: For vehicles without ABS, a PowerDisc can be used on the rea r axle only if there is one on the front axle. The General Operating Permit (ABE) for the PowerDisc applies to operation on German roads in accordance with the German Road Traffic Registration Ordinance (StVZO). Other countries may require additional type approvals for use on roads.
- Installatsiooni pool: Esisild
- Sõidukitüüp: RPO J61
- Veljesuurus (toll): 17
-
Piduriketta liik: augustatud/
sise - Pidurikettajämedus [mm]: 30
- Aukude arv: 5
- Piirangutega toode/piirangu info 2: koos kruvidega
- Kõrgus (mm): 51
-
Tsentri läbimõõt (mm): 67,
5 - Välisläbimõõt [mm]: 321
- Töötlus: hochgekohlt
- Pealispind: kaetud
-
Miinimumjämedus (mm): 27,
8 - Tehniline informatsioon: ECE R 90 Homologation.
- Nimetus: BR 09.A971.1X
- Tootja: BREMBO
Üldine informatsioon: The specific drilling of Brembo Xtra brake discs provides a brilliant and efficient performance in any braking condition, to emphasise the driving style of true enthusiasts.