Tootekategooriad
Filter Pidurid Šassii Roolimine Jahutus/kliima Elektrisüsteem Lisad Jõuülekanne Väljalaskesüsteem Kere Süüte-/eelsüütesüsteem Mootor Klaasid/klaasipuhastus Valgustus Kütusesüsteemi seadmed Kabiinivarustus HooldusToode
Kirjeldus
Laoseis
Hind
(km-ga)
- Material: Copper
- Outer Diameter [mm]: 22
- Inner Diameter [mm]: 16
- Thickness [mm]: 2
- Shape: C Shape
- Tootja: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Thickness [mm]: 2
- Inner Diameter [mm]: 16
- Outer Diameter [mm]: 22
- Weight [kg]: 0.033
- Tootja: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Inner Diameter [mm]: 16
- Outer Diameter [mm]: 24
- Thickness [mm]: 2
-
Sealing lip material: NBR
(nitrile butadiene rubber) - Gasket Design: Metal Elastomer Gasket
- Tootja: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Bolt Head-/Nut Design: Inner rectangle
- Thread Size: M 16
- Thread Pitch [mm]: 1.5
- Tootja: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Pikkus (mm): 19
-
Keermemõõt: M16 x 1,
50 - Tootja: 3RG
-
Pikkus (mm): 15,
5 -
Keermemõõt: M16 x 1,
5 - Kruvipea-/Mutriprofiil: sisekuuskant
- Tootja: AIC
Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Installatsiooni pool: mootoripoolne
- Piirangutega toode/piirangu info 2: ilma rõngastihendita
-
Keerme samm (mm): 1,
5 -
Kaal (kg): 0,
04 - vajaminev tükihulk: 1
-
Keermemõõt: M14 x 1,
5 -
Väliskeere [mm]: M14 x 1,
5 - Võtmekaugus: 17
- Kruvipea-/Mutriprofiil: Väliskuuskant
- Pealispind: tsingitud
- Keermepikkus (mm): 11
- Tootja: ACKOJA
Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Length [mm]: 17
- Outer Diameter [mm]: 22
-
External Thread Size: M16 x 1,
5 - Thread Length [mm]: 13
- Spanner Size: 8
- Bolt Head-/Nut Design: Inner rectangle
- Material: Steel
-
Surface: Zinc-
coated - Screw length below head [mm]: 17
- Weight [kg]: 0.02
- Supplementary Article/Info 2: without seal ring
-
Nimetus: SULGURKRUVI,
OLIVANN - Tootja: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 17
- Outer Diameter [mm]: 22
-
External Thread Size: M16 x 1,
5 - Thread Length [mm]: 13
- Spanner Size: 8
- Bolt Head-/Nut Design: Inner rectangle
- Material: Steel
-
Surface: Zinc-
coated - Screw length below head [mm]: 17
- Weight [kg]: 0.02
- Supplementary Article/Info 2: without seal ring
-
Nimetus: SULGURKRUVI,
OLIVANN - Tootja: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Pikkus (mm): 14
- Võtmekaugus: 8
- Kruvipea-/Mutriprofiil: sisenelikant
- Tootja: FAST
- Material: Steel
- Length [mm]: 20
- Thread Length [mm]: 16
- Spanner Size: 8
- Bolt Head-/Nut Design: Inner rectangle
-
Surface: Zinc-
coated - for OE number: 93198205
- Tootja: DELLO AUTOMEGA
- Pikkus (mm): 14
-
Väliskeerme mõõde: M16 x 1,
5 - Keermepikkus (mm): 12
- Võtmekaugus: 8
- Kruvipea-/Mutriprofiil: sisenelikant
- Materjal: Metall
- OE-numbri jaoks: 77 03 075 348
-
Tootja: ENERGY-
NARZÊDZIA WARSZTATOWE
- Inner Diameter [mm]: 14.3
- Outer Diameter [mm]: 24
- Material: Copper
- Thickness [mm]: 1.5
- Packing Type: Blister Pack
- Nimetus: COU 005590S
- Tootja: CORTECO
- Length [mm]: 14
-
External Thread Size: M16 x 1,
5 - Thread Length [mm]: 12
- Spanner Size: 8
- Bolt Head-/Nut Design: Inner rectangle
- Material: Steel
-
Surface: Zinc-
coated - Weight [kg]: 0.04
- Supplementary Article/Info 2: with seal ring
- Tootja: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Required quantity: 1
- Thread Length [mm]: 12
- Thread Pitch [mm]: 1.5
- Weight [kg]: 0.02
-
External Thread [mm]: M16 x 1,
5 -
Surface: Zinc-
coated - Spanner Size: 8
- Bolt Head-/Nut Design: Inner rectangle
- Supplementary Article/Info 2: with seal ring
- Fitting Position: engine sided
-
Thread Size: M16 x 1,
5 - Tootja: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Length [mm]: 14
-
External Thread Size: M16 x 1,
5 - Thread Length [mm]: 12
- Spanner Size: 8
- Bolt Head-/Nut Design: Inner rectangle
- Material: Steel
-
Surface: Zinc-
coated - Weight [kg]: 0.04
- Supplementary Article/Info 2: with seal ring
- Nimetus: SW 60 10 1250
- Tootja: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 21
-
Thread Size: M 14 x 1,
5 x 14 - Supplementary Article/Info 2: with seal ring
- Packing Type: Blister Pack
-
Nimetus: SULGURKRUVI,
OLIVANN - Tootja: COT
Laki Auto universaaltooted
TecDoc sõidukite kataloog
TecDoc veokite kataloog