Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Inner Diameter [mm]: 28.5
- Seal Diameter [mm]: 28.5
- Thickness [mm]: 3.8
-
Shape: O-
Ring - Name: RONGASTIHEND
- Manufacturer: HAN
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber) General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Thickness [mm]: 3.8
- Outer Diameter [mm]: 28.5
- Material: Rubber
- Weight [kg]: 0.006
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Pressure [bar]: 1.5
- Manufacturer: JAPKO
- Colour: blue
- Pressure [bar]: 1.4
- Material: Plastic
- Weight [kg]: 0.112
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Material: Aluminium
- Core Length [mm]: 650
- Core Width [mm]: 414
- Core Depth [mm]: 23
- Version: Alternative
- Radiator type: Mechanically jointed cooling fins
-
Name: RADIAATOR,
MOOTORIJAHUTUS - Manufacturer: NRF
- Lisainfo: 650*405*24
- Additional information: 650*405*24
- Cooling fins material: Aluminium
- Core Depth [mm]: 34
- Core Length [mm]: 650
- Core Width [mm]: 415
- Radiator type: Mechanically jointed cooling fins
- Water Tank Material (radiator): Plastic
- Core Length [mm]: 650
- Core Width [mm]: 415
- Core Depth [mm]: 24
- Cooling fins material: Aluminium
- Water Tank Material (radiator): Plastic
- Radiator type: Mechanically jointed cooling fins
- Manufacturer: KAMOKA
- Core Length [mm]: 650
- Core Width [mm]: 416
- Core Depth [mm]: 23
- Cooling fins material: Aluminium
- Water Tank Material (radiator): Plastic
-
Manufacturer: ABAKUS DEPO/
LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.
- Name: Radiator
- Quality class: ZJ
Lisainfo: "Tootja: RNBC
POLO 99-01
(kvaliteediklass: ZJ)"
-
Transmission Type: Manual Transmission,
Automatic Transmission -
Vehicle Equipment: for vehicles with/
without air conditioning - Core Length [mm]: 650
- Core Width [mm]: 415
- Core Depth [mm]: 30
- Inlet Ø [mm]: 32
- Outlet Ø [mm]: 32
- Radiator type: Mechanically jointed cooling fins
- reinforced version:
- Packaging length [cm]: 83
- Packaging width [cm]: 44
- Packaging height [cm]: 11.5
- Weight [kg]: 2.62
- Manufacturer: AKSDASIS
-
Transmission Type: Manual Transmission,
Automatic Transmission - Vehicle Equipment: for vehicles with air conditioning
- Core Length [mm]: 650
- Core Width [mm]: 415
- Core Depth [mm]: 25
- Inlet Ø [mm]: 32
- Outlet Ø [mm]: 32
- Radiator type: Mechanically jointed cooling fins
- Trim Level: Schnellverschluss
- Packaging length [cm]: 82.6
- Packaging width [cm]: 44.3
- Packaging height [cm]: 11.2
- Weight [kg]: 2.56
- Supplementary Article/Info 2: with EGR valve
- Manufacturer: AKSDASIS
- Vehicle Equipment: for vehicles without air conditioning
- Transmission Type: Manual Transmission
- Cooling fins material: Aluminium
- Core Depth [mm]: 34
- Core Length [mm]: 650
- Core Width [mm]: 415
- Radiator type: Mechanically jointed cooling fins
- Water Tank Material (radiator): Plastic
- Name: Radiator
- Quality class: P
Lisainfo: "Tootja: RNBC
POLO 99-01
(kvaliteediklass: P)"
- Water Tank Material (radiator): Plastic
- Cooling fins material: Aluminium
- Core Length [mm]: 650
- Core Width [mm]: 415
- Core Depth [mm]: 24
-
Lisainfo: Radiator,
650x414 mm, PL/ ALU -
Additional information: Radiator,
650x414 mm, PL/ ALU
- Cooling fins material: Aluminium
- Core Depth [mm]: 23
- Core Length [mm]: 650
- Core Width [mm]: 416
- Inlet Ø [mm]: 32
- Outlet Ø [mm]: 32
- Radiator type: Mechanically jointed cooling fins
-
Supplementary Article/Info 2: without expansion tank,
without frame -
Supplementary Article/Supplementary Info: with gaskets/
seals - Water Tank Material (radiator): Plastic
- Manufacturer: NISSENS
- Name: NI 652011
-
Lisainfo: AUDI A 3 /
S 3 (8L) (96- ) 1.8 T -
Additional information: AUDI A 3 /
S 3 (8L) (96- ) 1.8 T
Installation Information: FIRST FIT - a time-saving installation! Find all additional parts such as caps, gaskets, nuts, clamps, plugs, bolts, fittings, screws and other parts in the box
- Name: Radiator
- Quality class: PJ
Lisainfo: "Tootja: SRL
POLO 99-01
(kvaliteediklass: P)"
- Material: Aluminium
- Core Length [mm]: 647
- Core Width [mm]: 399
- Core Depth [mm]: 27
- Supplementary Article/Info 2: with seal ring
- Radiator type: Brazed cooling fins
-
Name: RADIAATOR,
MOOTORIJAHUTUS - Manufacturer: NRF
- Lisainfo: 647*399*24
- Additional information: 647*399*24
- Radiator type: Mechanically jointed cooling fins
- Core Length [mm]: 650
- Core Width [mm]: 415
- Core Depth [mm]: 23
- Water Tank Material (radiator): Plastic
-
Vehicle Equipment: for vehicles with/
without air conditioning - Transmission Type: Manual Transmission
- Packaging width [cm]: 12
-
Net Weight [g]: 2,
525 - Packaging height [cm]: 50
- Packaging length [cm]: 81
-
Name: Radiaator,
mootorijahutus - Manufacturer: BEH MAH
General Information: The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.
- Core Length [mm]: 0
- Core Width [mm]: 0
- Core Depth [mm]: 0
- General Information: radiator; pipe enlarging
- Manufacturer: VIKA
- Name: Radiator
- Quality class: PJ
Lisainfo: "Tootja: KOYO
POLO 99-01
(kvaliteediklass: PJ)"
- New Part:
- Radiator type: Mechanically jointed cooling fins
- Heating/Cooling: for vehicles with high performance radiator
- Core Length [mm]: 652
- Core Width [mm]: 404
- Core Depth [mm]: 24
- Water Tank Material (radiator): Plastic
- Manufacturer: produced by MAHLE
-
Vehicle Equipment: for vehicles with/
without air conditioning - Packaging width [cm]: 12.7
-
Net Weight [g]: 2,
409 - Packaging height [cm]: 48
- Packaging length [cm]: 84
-
Name: Radiaator,
mootorijahutus
General Information: The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.
- Seal Material: Lead
- Core Length [mm]: 0
- Core Width [mm]: 0
- Core Depth [mm]: 0
- General Information: radiator; lead welding
- Manufacturer: VIKA
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks