• Cable Length [mm]: 570
• Fabrication Number: ECP-AU-010
• Manufacturer: NTY

• Number of pins: 3
• Supplementary Article/Info 2: with bracket
• Weight [kg]: 0.1
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV550

• Cable Length [mm]: 570
• Sensor Type: Passive sensor
• for OE number: 06A 906 433 C
• Manufacturer: KAMOKA

• Sensor Type: Inductive Sensor
• Number of pins: 3
• Cable Length [mm]: 570
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Fabrication Number: ECP-AU-003
• Manufacturer: NTY

• Sensor Type: Active sensor
• for OE number: 058 905 161 B
• Manufacturer: KAMOKA

• Number of pins: 2
• Fabrication Number: ECP-VW-004
• Manufacturer: NTY

• Sensor Type: Hall Sensor
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Construction Year from: 05.2001
• Manufacturer: MAGNETI MARELLI

• Construction Year from: 05.2001
• Transmission Type: 5-Speed Manual Transmission
• Number of pins: 3
• Weight [kg]: 0.04
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: ESEN SKV

• Cable Length [mm]: 570
• Resistor [kOhm]: 0.86
• General Information: impulse sender; crackshaft
• Manufacturer: VIKA

• Sensor Type: Inductive Sensor
• Number of pins: 3
• Cable Length [mm]: 355
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Construction Year to: 07.2004
• Sensor Type: Passive sensor
• Number of pins: 3
• Voltage [V]: 12
• Name: ANDUR, VŽNTVOLL
• Manufacturer: MAX

Manufacturer: MAGNETI MARELLI

• Construction Year to: 07.2004
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Quality: OE EQUIVALENT
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MD

• Transmission Type: Automatic Transmission
• Voltage [V]: 12
• Length [mm]: 330
• Number of pins: 3
• Weight [kg]: 0.05
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV270

• Construction Year to: 07.2004
• Number of pins: 3
• Connector Shape: rectangular
• Number of mounting bores: 2
• Sensor Type: Hall Sensor
• for OE number: 058905161B
• Manufacturer: DELLO AUTOMEGA

• Construction Year to: 07.2004
• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 3
• Weight [kg]: 0.11
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV222
• Manufacturer: ESEN SKV

• Construction Year to: 07.2004
• Voltage [V]: 12
• Length [mm]: 515
• Number of pins: 3
• Weight [kg]: 0.1
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV213

• Engine Code: AGN, APG
• Vehicle Identification Number (VIN) to: 1M X 025 000
• Transmission Type: Automatic Transmission
• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 2
• Weight [kg]: 0.02
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: ESEN SKV

• Engine Code: AGN
• Required quantity: 1
• Number of pins: 3
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: with cable
• Housing Colour: black
• Socket colour: grey
• Name: CZUJNIK POO½ENIA WAU KORB. VW GOLF 1,6 99-
• Manufacturer: BRM

Manufacturer: MAGNETI MARELLI

• Transmission Type: 4-Speed Automatic Transmission
• Number of pins: 2
• Weight [kg]: 0.03
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: ESEN SKV

• Operating voltage [V]: 12
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Number of pins: 3
• Manufacturer: JP GROUP
• Lisainfo: Hall sender
• Additional information: Hall sender

• Voltage [V]: 12
• Number of pins: 3
• Name: Andur,steimpulss
• Manufacturer: MAX

• Cable Length [mm]: 570
• Number of connectors: 3
• Housing Colour: grey
• Manufacturer: JP GROUP
• Lisainfo: Sensor, crankshaft pulse
• Additional information: Sensor, crankshaft pulse

• Connector Shape: D Shape
• Number of pins: 3
• Supplementary Article/Info 2: with cable
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Sensor Type: Hall Sensor
• Connector Shape: rectangular
• Number of pins: 3
• General Information: hall sender camshaft
• Manufacturer: VIKA

• for OE number: 095 927 321 B
• Manufacturer: TRUCKTEC AUTOMOTIVE

• Construction Year from: 05.2001
• Sensor Type: Hall Sensor
• Connector Shape: rectangular
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Construction Year to: 07.2004
• Cable Length [mm]: 542
• Number of pins: 3
• Name: ANDUR, VŽNTVOLL
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
OCTAVIA COMBI (1U5),
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
OCTAVIA COMBI (1U5),
(kvaliteediklass: PJ)"

• Colour: black
• Cable Length [mm]: 570
• Number of pins: 3
• Supplementary Article/Info 2: with seal ring
• Weight [kg]: 0.072
• Resistor [Ohm]: 900
• Fitting Depth [mm]: 24
• Manufacturer: ERA

• Engine Code: AGN, APG
• Vehicle Identification Number (VIN) from: 1M-Y-000 001
• Number of Gears: 4 Speed
• Block Separation:
• Number of pins: 3
• Supplementary Article/Info 2: with seal ring, with cable
• Connector Shape: angular
• Weight [kg]: 0.083
• Manufacturer: VEMO

Transmission Type: Automatic Transmission, 4-Speed Automatic Transmission General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Length [mm]: 570
• Number of connectors: 3
• Weight [kg]: 0.066
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 570
• Number of connectors: 3
• Weight [kg]: 0.066
• Supplementary Article/Info 2: with seal ring
• Name: SW 32 92 4444
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 10.2005
• Engine Code: AGN,APG
• Sensor Type: Inductive Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: D Shape
• Supplementary Article/Info 2: with cable
• Resistor [Ohm]: 900
• Weight [kg]: 0.09
• Name: ANDUR, VŽNTVOLL
• Manufacturer: VAL
• Lisainfo: VAL254003
• Additional information: VAL254003

• Transmission Type: Automatic Transmission
• Voltage [V]: 12
• Length [mm]: 290
• Number of pins: 3
• Weight [kg]: 0.07
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: ESEN SKV

• General Information: speedometer
• Manufacturer: VIKA

• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: with seal ring
• Cable Length [mm]: 532
• Number of pins: 3
• Name: Andur, v„ntvoll
• Manufacturer: MEY

• Transmission Type: 4-Speed Automatic Transmission
• Number of pins: 2

• for OE number: 058 905 161 B
• Manufacturer: TRUCKTEC AUTOMOTIVE

• Sensor Type: Hall Sensor
• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: MEY

• Engine Code: AGN
• Number of mounting bores: 1
• Voltage [V]: 12
• Resistor [Ohm]: 900
• Tolerance [%]: 10
• Cable Length [mm]: 570
• Sensor Type: Inductive Sensor
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU009146251

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Transmission Type: 4-Speed Automatic Transmission
• Length [mm]: 59
• Supplementary Article/Info 2: for crankshaft, with seal ring, without cable
• Required quantity: 1
• Resistor [Ohm]: 850
• Colour: black
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Number of connectors: 2
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 30.3
• Connector Shape: D Shape
• Weight [kg]: 0.018
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Sensor Type: Inductive Sensor
• Cable Length [mm]: 570
• Number of pins: 3
• Name: ANDUR, VŽNTVOLL
• Manufacturer: MEY

• Supplementary Article/Info 2: with cable
• Length [mm]: 570
• Height [mm]: 24
• Resistor [Ohm]: 900
• Number of connectors: 3
• Manufacturer: VERNET

• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"

• Construction Year from: 09.2000
• Construction Year to: 10.2005
• Engine Code: APG
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Resistor [Ohm]: 840
• Weight [kg]: 0.02
• Manufacturer: VALEO
• Name: VA 366601

• Construction Year to: 10.2005
• Engine Code: AGN,APG
• Length [mm]: 585
• Width [mm]: 38.75
• Height [mm]: 45.4
• Weight [kg]: 0.068, 0.071
• Required quantity: 1
• Supplementary Article/Info 2: for crankshaft, with cable
• Resistor [Ohm]: 900
• Colour: black
• Operating Mode: Electric
• Cable Length [mm]: 570
• Sensor Type: Inductive Sensor, Passive sensor
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 3
• Number of connectors: 3
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 24
• Connector Shape: D Shape
• Number of mounting bores: 1
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: AGN
• Colour: grey
• Length [mm]: 570
• Name: ANDUR, VŽNTVOLL
• Manufacturer: EPS

• Number of connectors: 3
• Weight [kg]: 0.062
• for OE number: 058 905 161 B
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Weight [kg]: 0.066
• Number of connectors: 3
• Required quantity: 1
• General Information: crankshaft pulse sensor
• Manufacturer: BORSEHUNG

• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Sensor Type: Hall Sensor
• Manufacturer: FAE

Manufacturer: MAGNETI MARELLI

• Construction Year to: 07.2004
• Name: ANDUR, VŽNTVOLL
• Manufacturer: BOS

• Vehicle Identification Number (VIN) from: 1J-Y-000001
• Number of pins: 2
• Manufacturer: FAE

• Construction Year to: 10.2005
• Engine Code: AGN,APG
• Sensor Type: Hall Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: angled
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.09
• Manufacturer: VALEO
• Name: VA 253814

• Engine Code: AGN
• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: with cable
• Manufacturer: FAE

• Construction Year to: 10.2005
• Engine Code: AGN,APG
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Weight [kg]: 0.096
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Operating Mode: Electric
• Manufacturer: MAGNETI MARELLI

• Construction Year to: 07.2004
• Warranty: 5 years warranty
• Manufacturer: HITACHI

Manufacturer: MAGNETI MARELLI

• Engine Code: AGN
• Manufacturer: EPS

• General Information: camshaft position sensor
• Manufacturer: BORSEHUNG

• Construction Year to: 07.2004
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: BOS