• Number of pins: 3
• Weight [kg]: 0.04
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: ESEN SKV

• Number of pins: 3
• Weight [kg]: 0.05
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV552
• Manufacturer: ESEN SKV

• Fabrication Number: ECP-AU-024
• Manufacturer: NTY

• Sensor Type: Active sensor
• for OE number: 30907601
• Manufacturer: KAMOKA

• Transmission Type: 5-Speed Manual Transmission
• Number of pins: 3
• Weight [kg]: 0.03
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV553

• Sensor Type: Active sensor
• for OE number: 36907601
• Manufacturer: KAMOKA

• Engine Code: BBZ
• Construction Year from: 01.2006
• Sensor Type: Active sensor
• Fitting Depth [mm]: 24
• Number of pins: 3
• Voltage [V]: 12
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: MAX

• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 3
• Weight [kg]: 0.03
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Fabrication Number: ECP-AU-035
• Manufacturer: NTY

• Sensor Type: Hall Sensor
• Number of pins: 3
• Component Number: 120-05-094
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Sensor Type: Hall Sensor
• Connector Shape: rectangular
• Number of pins: 3
• General Information: hall sender camshaft
• Manufacturer: VIKA

• Required quantity: 1
• Construction Year from: 01.2006
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Quantity: 1
• Connector Shape: oval
• Number of pins: 3
• General Information: hall sender camshaft
• Manufacturer: VIKA

• Number of pins: 3
• Connector Shape: D Shape
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Fitting Depth [mm]: 24
• for OE number: 036 907 601 E
• for article number: 87278E
• Quality: OE EQUIVALENT
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MD

• Number of pins: 3
• Weight [kg]: 0.03
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV487

• Construction Year to: 12.2005
• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 3
• Weight [kg]: 0.03
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Height [mm]: 24.4
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Construction Year to: 12.2005
• Number of pins: 3
• Connector Shape: D Shape
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Fitting Depth [mm]: 24.3
• for OE number: 030 907 601 E, 03D 907 601
• Quality: OE EQUIVALENT
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MD

• Required quantity: 1
• Construction Year to: 12.2005
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Name: CZUJNIK POO½ENIA WAKA ROZRZ. VW GOLF 1,4TSI
• Manufacturer: BRM

• General Information: hall sender camshaft
• Manufacturer: VIKA

• Vehicle Identification Number (VIN) from: 6L-6-000001
• Connector Shape: D Shape
• Number of pins: 3
• Supplementary Article/Info 2: with seal ring, without cable
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Height [mm]: 24
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Construction Year to: 12.2005
• Number of pins: 3
• Supplementary Article/Info 2: without cable, with seal ring

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with cable
• Housing Colour: black
• Name: CZUJNIK POO½ENIA WAU KORB. VW GOLF 1,4 02-
• Manufacturer: BRM

• Construction Year to: 12.2007
• Engine Code: BBZ
• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: DLP

Additional information: "Tootja: DELPHI
BORA (1J2), 10.98-09
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
BORA (1J2), 10.98-09
(kvaliteediklass: PJ)"

• Supplementary Article/Info 2: with cable
• Length [mm]: 520
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Engine Code: BBZ
• Cable Length [mm]: 520
• Name: Andur, v„ntvoll
• Manufacturer: MAX

• Number of connectors: 3
• Cable Length [mm]: 435
• Weight [kg]: 0.045
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: BBZ
• Cable Length [mm]: 520
• Number of connectors: 3
• Housing Colour: black
• Manufacturer: JP GROUP
• Lisainfo: Sensor, crankshaft pulse
• Additional information: Sensor, crankshaft pulse

• Engine Code: BBZ
• Construction Year to: 12.2005
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: EPS

• Number of connectors: 3
• Cable Length [mm]: 435
• Weight [kg]: 0.045
• Name: SW 33 10 3117
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 3
• Fitting Depth [mm]: 36
• Weight [kg]: 0.031
• Manufacturer: ERA

• Length [mm]: 62
• Width [mm]: 23
• for OE number: 036 907 601 E
• Height [mm]: 45
• Weight [kg]: 0.018, 0.03
• Supplementary Article/Info 2: for camshaft, with seal ring, without cable
• Required quantity: 1
• Colour: black
• Operating Mode: Electric
• Sensor Type: Active sensor, Hall Sensor
• Number of pins: 3
• Number of connectors: 3
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 24
• Housing Colour: black
• Connector Shape: D Shape
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 12.2005
• Sensor Type: Hall Sensor
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PU013122671
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year from: 01.2006
• Voltage [V]: 12
• Corresponds to the original part in colour: black
• Sensor Type: Hall Sensor
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Assy./disassy. by qualified personnel required!:
• Name: Andur,Nukkvollipositsioon
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: BBZ
• Length [mm]: 520
• Name: ANDUR, VŽNTVOLL
• Manufacturer: EPS

• Supplementary Article/Info 2: for camshaft
• Number of pins: 3
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Alternatively:
• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: DLP

• Cable Length [mm]: 378
• Number of pins: 3
• Name: ANDUR, VŽNTVOLL
• Manufacturer: DLP

• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
LUPO (6X1, 6E1), 09.
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
LUPO (6X1, 6E1), 09.
(kvaliteediklass: PJ)"

• Construction Year to: 11.2006
• Manufacturer: BOSCH

• Number of connectors: 3
• Weight [kg]: 0.035
• for OE number: 036 907 601 E
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 01.2006
• Fitting Depth [mm]: 24.3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: TRI

• Number of connectors: 3
• Weight [kg]: 0.035
• for OE number: 036 907 601 E
• Name: SW 30 93 7510
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Manufacturer: MAGNETI MARELLI

• Sensor Type: Hall Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: D Shape
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.03
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: VAL

• Engine Code: BBZ
• Construction Year from: 01.2006
• Manufacturer: FACET
• Name: EP 1.953.269

• Height [mm]: 24
• Colour Coding: black
• Warranty: 5 years warranty
• Manufacturer: HUCO

• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Fitting Depth [mm]: 36
• for article number: 87564
• Manufacturer: MEAT&DORIA

• Number of pins: 3
• Fitting Depth [mm]: 24
• Housing Colour: black
• Weight [kg]: 0.035
• Manufacturer: ERA

• Supplementary Article/Info 2: for crankshaft, with screw
• Required quantity: 1
• Number of pins: 3
• Cable Length [mm]: 480
• Sensor Type: Inductive Sensor
• Number of connectors: 3
• Rated Voltage [V]: 12
• Weight [kg]: 0.048
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Cable Length [mm]: 490
• Number of pins: 3
• Manufacturer: ERA

• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: D Shape
• Supplementary Article/Info 2: with cable
• Weight [kg]: 0.07
• Manufacturer: VALEO

• Operating Mode: Electric
• Manufacturer: MAGNETI MARELLI

• Number of pins: 3
• Warranty: 5 years warranty
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

• Sensor Type: Hall Sensor
• Number of pins: 3
• Housing Colour: black
• Supplementary Article/Info 2: without cable
• Manufacturer: FAE

• Construction Year to: 11.2006
• Manufacturer: BOSCH

• Sensor Type: Hall Sensor
• Number of pins: 3
• Supplementary Article/Info 2: without screw
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Name: HE 6PU009167471
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Required quantity: 1
• Number of pins: 3
• Supplementary Article/Info 2: for camshaft, without cable
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 36
• Housing Colour: black
• Connector Shape: D Shape
• Resistor [kOhm]: 34
• Weight [kg]: 0.018
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with cable
• Length [mm]: 490
• Connector Shape: D Shape
• Manufacturer: FAE

• Supplementary Article/Info 2: for crankshaft, with cable, with screw
• Required quantity: 1
• Cable Length [mm]: 485
• Sensor Type: Inductive Sensor
• Number of pins: 3
• Number of connectors: 3
• Rated Voltage [V]: 12
• Connector Shape: D Shape
• Number of mounting bores: 1
• Weight [kg]: 0.048
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• General Information: camshaft position sensor
• Manufacturer: BORSEHUNG

• Voltage [V]: 12
• Length [mm]: 870
• Weight [kg]: 0.13
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Construction Year to: 12.2005
• Number of pins: 3
• Connector Shape: D Shape
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Fitting Depth [mm]: 24.3
• for OE number: 030 907 601 E, 03D 907 601
• Lisainfo: 87281 NIS
• Additional information: 87281 NIS