Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Fitting Position: Lower,
Front Axle Left, Front Axle Right -
Material: Rubber,
Plastic - Thickness [mm]: 52
- Width [mm]: 170
- Inner Diameter [mm]: 19
- Outer Diameter [mm]: 63
- Name: Control arm bush left=right
- Quality class: PJ
Lisainfo: "Tootja: SRL
AUDI A3 03-/GOLF V
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
AUDI A3 03-/GOLF V
(kvaliteediklass: PJ)"
-
Fitting Position: Front Axle Left,
Front Axle Right, Front -
Mounting Type: Rubber-
Metal Mount - Manufacturer: JP GROUP
-
Lisainfo: Rubber mount for wishbone,
front -
Additional information: Rubber mount for wishbone,
front
-
Fitting Position: Front Axle,
Lower, Front - Vehicle Identification Number (VIN) to: 6L 8 157 034
- Control/Trailing Arm Type: Control Arm
- Required quantity: 2
-
Mounting Type: Rubber-
Metal Mount -
Lisainfo: SEAT,
SKODA, VW -
Additional information: SEAT,
SKODA, VW
-
Fitting Position: Lower,
Lower Front Axle - for OE number: 191 407 182
- Manufacturer: GSP
-
Fitting Position: Front Axle,
Front - Construction Year from: 03.2008
-
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 33
- Manufacturer: DELLO AUTOMEGA
-
Fitting Position: Front Axle,
both sides -
Mounting Type: Rubber-
Metal Mount -
Fabrication Number: ZTP-
VW- 007A - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Fitting Position: Front Axle,
Lower, Front - Construction Year from: 03.2008
- Inner Diameter 1 [mm]: 12
- Outer Diameter 1 [mm]: 33
- Thickness 1 [mm]: 54
- Manufacturer: DELPHI
- Construction Year from: 03.2008
-
Fitting Position: Front,
Front Axle Left, Front Axle Right - Thickness [mm]: 54
- Height [mm]: 54
- Outer Diameter 1 [mm]: 33
- Outer Diameter 2 [mm]: 36
- Inner Diameter 1 [mm]: 12
- Manufacturer: BGA
- Construction Year from: 03.2008
-
Fitting Position: Lower,
Front Axle Left, Front Axle Right -
Material: Steel,
Rubber/ Metal - Thickness [mm]: 54
- Inner Diameter [mm]: 12
-
Outer Diameter [mm]: 36,
33 - Name: Control arm bush left=right
- Quality class: PJ
Lisainfo: "Tootja: SRL
VW POLO/GOLF/S.IBIZA
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
VW POLO/GOLF/S.IBIZA
(kvaliteediklass: PJ)"
-
Fitting Position: both sides,
Lower Front Axle, Front - Inner Diameter [mm]: 12
- Required quantity: 2
- Manufacturer: TEDGUM
-
Fitting Position: Front Axle,
Front, Lower - Inner Diameter [mm]: 12
- Outer Diameter [mm]: 33
- for OE number: 357407182
- Manufacturer: SASIC
- Construction Year from: 03.2008
- Thickness [mm]: 54
- Inner Diameter [mm]: 12
-
Outer Diameter [mm]: 33,
36 -
Material: Rubber/
Metal, Metal -
Fitting Position: Front Axle Left,
Front, Front Axle Right - Weight [kg]: 0.11
- Manufacturer: SWAG
- Name: SW 30 69 0002
Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- for OE number: 191407182
-
Fitting Position: Lower,
Front, Front Axle - Required quantity: 2
- Material: Metal
- Weight [g]: 113
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 33
- Length [mm]: 54
- Name: IM 32200
- Manufacturer: ORIGINAL IMPERIUM
- Fitting Position: Lower Front Axle
- Length [mm]: 54
- Weight [kg]: 0.105
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 33
-
Mounting Type: Rubber-
Metal Mount - Weight [g]: 105
- Manufacturer: METALCAUCHO
- Construction Year to: 03.2008
-
Mounting Type: Rubber-
Metal Mount - Fitting Position: mounting
- Name: Control arm bush left=right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
VW POLO/GOLF/S.IBIZA
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
VW POLO/GOLF/S.IBIZA
(kvaliteediklass: PJ)"
- Construction Year from: 03.2008
- Thickness [mm]: 54
- Inner Diameter [mm]: 12
-
Outer Diameter [mm]: 33,
36 -
Material: Rubber/
Metal -
Fitting Position: Front Axle Left,
Front, Front Axle Right - Weight [kg]: 0.1
- Manufacturer: FEBI BILSTEIN
Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Front Axle,
Lower, Front - Inner Diameter [mm]: 12
- Outer Diameter [mm]: 33
- Height [mm]: 54
- Name: ALT 80941AL
- Manufacturer: ALTE AUTOMOTIVE
- Construction Year from: 03.2008
-
Fitting Position: Lower,
Front, Front Axle both sides - Required quantity: 2
- paired article number: VKDS 331002
- Manufacturer: SKF
- Name: SK VKDS331002
- Fitting Position: Front
- General Information: bonded rubber bush; front
- Manufacturer: BORSEHUNG
-
Fitting Position: Front Axle,
Front - Construction Year from: 03.2008
-
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 32.5
- Width [mm]: 55
- SVHC: No SVHC present!
- Manufacturer: FAG
- Name: LU 829009210
- Construction Year from: 03.2008
- Inner Diameter [mm]: 12.1
- Outer Diameter [mm]: 32.4
- Length [mm]: 54
- paired article number: 270315
- Weight [kg]: 0.09
-
Installation Information: Important:
Observe Fitting Instructions - Manufacturer: A.B.S.
Fitting Position: in front of axle, Front Axle Right, Front Axle Left, inner, Lower
-
Fitting Position: Front Axle,
Rear - Construction Year from: 03.2008
-
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Inner Diameter [mm]: 13
- Outer Diameter [mm]: 60
- Manufacturer: DELLO AUTOMEGA
-
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
-
Fitting Position: Front Axle both sides,
Lower, Front - Inner Diameter [mm]: 12.2
- Length [mm]: 54
- Weight [kg]: 0.11
- Manufacturer: RTS
-
Fitting Position: Front Axle,
Rear, Lower - Inner Diameter [mm]: 13
- Outer Diameter [mm]: 59.5
- for OE number: 1J0407181
- Manufacturer: SASIC
-
Fitting Position: Front Axle,
Lower, Front - Construction Year to: 02.2008
- Inner Diameter 1 [mm]: 12
- Outer Diameter 1 [mm]: 41
- Thickness 1 [mm]: 54
- Manufacturer: DELPHI
- Name: DE TD409W
-
Fitting Position: Front Axle,
Rear, Lower - Construction Year from: 03.2008
- Inner Diameter 1 [mm]: 13
- Outer Diameter 1 [mm]: 60
- Thickness 1 [mm]: 41
- Manufacturer: DELPHI
- Name: DE TD287W
-
Fitting Position: Front Axle,
Rear -
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Inner Diameter [mm]: 18
- Outer Diameter [mm]: 64
- Manufacturer: DELLO AUTOMEGA
- Construction Year from: 03.2008
-
Fitting Position: Rear,
Lower, Front Axle both sides - Required quantity: 2
- paired article number: VKDS 331001
- Manufacturer: SKF
- Name: SK VKDS331001
-
Fitting Position: Front Axle,
Rear - Construction Year from: 03.2008
-
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Inner Diameter [mm]: 12.5
- Outer Diameter [mm]: 60
- Width [mm]: 41
- SVHC: No SVHC present!
- Manufacturer: FAG
- Name: LU 829009310
-
Fitting Position: Right,
Front Axle - Material: Metal
- Control/Trailing Arm Type: for control arm
- Weight [g]: 118
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 60
- Length [mm]: 45
- Overall Length [mm]: 64
- Name: IM 1634
- Manufacturer: ORIGINAL IMPERIUM
- Vehicle Identification Number (VIN) to: 6L8173860
- Fitting Position: both sides
-
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Weight [kg]: 0.12
-
Name: DY 37-
06068- 8 - Manufacturer: DYS
-
Fitting Position: Front Axle,
Front, Lower - Inner Diameter [mm]: 12
- Outer Diameter [mm]: 33
- for OE number: 6Q0407182A
- Manufacturer: SASIC
- Construction Year to: 03.2008
- Thickness [mm]: 54
- Inner Diameter [mm]: 12
-
Outer Diameter [mm]: 33,
40 -
Material: Rubber/
Metal -
Fitting Position: Front Axle Left,
Lower, Front, Front Axle Right -
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.108
- Manufacturer: FEBI BILSTEIN
Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Thickness [mm]: 51
- Outer Diameter [mm]: 63
-
Fitting Position: Front Axle both sides,
Rear - Manufacturer: DENCKERMANN ZAWIESZENIE
-
Fitting Position: Front Axle Left,
Front Axle Right - Manufacturer: JP GROUP
-
Lisainfo: Rubber mount for wishbone,
front, rear -
Additional information: Rubber mount for wishbone,
front, rear
- Fitting Position: Front Axle
- Height [mm]: 54
- Weight [kg]: 0.15
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 33
- Control/Trailing Arm Type: Control Arm
-
Mounting Type: Rubber-
Metal Mount - Weight [g]: 150
- Manufacturer: METALCAUCHO
-
Vehicle Identification Number (VIN) from: 6L-
8- 157 034 - Fitting Position: Lower Front Axle
- Weight [kg]: 0.105
- Height 1 [mm]: 23.4
- Height 2 [mm]: 41
- Inner Diameter [mm]: 13
- Outer Diameter [mm]: 59.8
- Control/Trailing Arm Type: Control Arm
-
Mounting Type: Rubber-
Metal Mount - Weight [g]: 105
- Manufacturer: METALCAUCHO
-
Fitting Position: Lower,
Lower Front Axle - Manufacturer: GSP
-
Fitting Position: Rear,
Lower, Front Axle both sides - Thickness [mm]: 51
- Weight [kg]: 0.106
-
Material: Rubber,
Plastic - Inner Diameter [mm]: 21
-
Outer Diameter [mm]: 63,
71 - Shore-A hardness value, base body: 70
- Manufacturer: METALCAUCHO
- Construction Year to: 03.2008
- Thickness [mm]: 54
- Inner Diameter [mm]: 12
-
Outer Diameter [mm]: 32,
40 -
Material: Rubber/
Metal -
Fitting Position: Front Axle Left,
Lower, Front, Front Axle Right -
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.11
- Manufacturer: SWAG
- Name: SW 30 93 6098
Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Vehicle Identification Number (VIN) to: 6L-
8- 200 000 -
Fitting Position: Left,
Right, Rear - Manufacturer: CORTECO
- Name: COC 80001202
-
Fitting Position: Front Axle,
Rear, Lower - Inner Diameter [mm]: 18.5
- Outer Diameter [mm]: 64
- for OE number: 1K0407183E
- Manufacturer: SASIC
-
Fitting Position: Front Axle Left,
Front Axle Right, Front, inner - Control/Trailing Arm Type: for control arm
-
Mounting Type: Rubber-
Metal Mount - Quantity per axle: 2
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fitting Position: Front Axle,
Rear, Lower - Construction Year to: 02.2008
- Inner Diameter 1 [mm]: 21
- Outer Diameter 1 [mm]: 64
- Thickness 1 [mm]: 52
- Manufacturer: DELPHI
- Name: DE TD410W
- Additional information: TD410W DEL
- Lisainfo: TD410W DEL
- Construction Year from: 03.2008
- Thickness [mm]: 41
- Inner Diameter [mm]: 13
-
Outer Diameter [mm]: 60,
27 -
Material: Rubber/
Metal -
Fitting Position: Front Axle Right,
Front Axle Left, Lower, Rear - Weight [kg]: 0.108
- Observe service information:
- Manufacturer: FEBI BILSTEIN
Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear
- General Information: bonded rubber bush; rear
- Manufacturer: BORSEHUNG
-
Fitting Position: Front Axle,
Rear, both sides -
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
-
Material: Rubber/
Metal - Required quantity: 2
- Supplementary Article/Supplementary Info: without roof rails
- Name: TG 00726011
- Manufacturer: TEDGUM
- Additional information: 00726011
- Lisainfo: 00726011
-
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
-
Fitting Position: Front Axle both sides,
Lower, Rear - Outer Diameter [mm]: 59.6
- Inner Diameter [mm]: 13
- Length [mm]: 41
- Weight [kg]: 0.11
- Manufacturer: RTS
- Construction Year to: 03.2008
-
Mounting Type: Rubber-
Metal Mount - Fitting Position: mounting
- Name: Control arm bush left=right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
VW POLO/GOLF/S.IBIZA
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
VW POLO/GOLF/S.IBIZA
(kvaliteediklass: PJ)"
- Vehicle Identification Number (VIN) from: 6L8173860
-
Fitting Position: Front Axle,
outer -
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Weight [kg]: 0.1
-
Name: DY 37-
06106- 6 - Manufacturer: DYS
-
Fitting Position: Lower,
Lower Front Axle - for OE number: 1J0 407 181
- Manufacturer: GSP
- Construction Year from: 03.2008
- Thickness [mm]: 41
- Inner Diameter [mm]: 13
-
Outer Diameter [mm]: 60,
27 -
Material: Rubber/
Metal -
Fitting Position: Front Axle Right,
Front Axle Left, Lower, Rear - Weight [kg]: 0.104
- for OE number: 1J0 407 181
- Manufacturer: SWAG
- Name: SW 32 69 0009
- Lisainfo: 32 69 0009 SWA
- Additional information: 32 69 0009 SWA
Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Front Axle,
Rear -
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Inner Diameter [mm]: 18
- Outer Diameter [mm]: 64
- Width [mm]: 50
- SVHC: No SVHC present!
- Manufacturer: FAG
- Name: LU 829031810
-
Vehicle Identification Number (VIN) to: 6L-
8- 200000 -
Fitting Position: Front Axle Left,
Front Axle Right, Rear - Control/Trailing Arm Type: for control arm
-
Mounting Type: Rubber-
Metal Mount - Quantity per axle: 2
- Outer Diameter [mm]: 63
- Inner Diameter [mm]: 19
- Width [mm]: 45
- for OE number: 1K0 407 183E
- new version:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Construction Year from: 03.2008
- Inner Diameter [mm]: 13
- Outer Diameter [mm]: 59.5
- Length [mm]: 41
- paired article number: 270318
- Weight [kg]: 0.11
-
Installation Information: Important:
Observe Fitting Instructions - Manufacturer: A.B.S.
Fitting Position: behind the axle, Front Axle Left, Front Axle Right, Lower
-
Fitting Position: Front Axle,
Front - Construction Year to: 01.2008
- Inner Diameter [mm]: 12.2
- Outer Diameter 1 [mm]: 40
- Outer Diameter 2 [mm]: 33
- Width [mm]: 54
- SVHC: No SVHC present!
- Name: LU 829059910
- Manufacturer: FAG
- Manufacturer: FAST
Fitting Position: Front Axle Left, Front Axle Right, Rear Axle Left, Rear Axle Right
- for OE number: 1K0407183E
-
Fitting Position: Front Axle Left,
Front Axle Right, Lower - Name: DA DSS1013
- Manufacturer: DAYCO
-
Fitting Position: Front Axle,
Lower, Front - Inner Diameter [mm]: 12
- Outer Diameter [mm]: 33
- Height [mm]: 54
- Name: ALT 82940AL
- Manufacturer: ALTE AUTOMOTIVE
-
Fitting Position: Front Axle,
Lower, Rear - Inner Diameter [mm]: 26
- Outer Diameter [mm]: 71
- Height [mm]: 52
- Name: ALT 86132AL
- Manufacturer: ALTE AUTOMOTIVE
- Construction Year to: 03.2008
- reinforced version:
- new version:
- Thickness [mm]: 51
- Inner Diameter [mm]: 19
-
Outer Diameter [mm]: 63,
71 -
Material: Rubber/
Metal -
Fitting Position: Lower,
Front Axle Left, Rear, Front Axle Right - Weight [kg]: 0.106
- Observe service information:
- Manufacturer: FEBI BILSTEIN
- Additional information: FE31253
- Lisainfo: FE31253
Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Front Axle both sides,
Lower, Front -
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Outer Diameter 2 [mm]: 12.2
- Length [mm]: 54
- Weight [kg]: 0.126
- Manufacturer: RTS
- Construction Year to: 03.2008
-
Fitting Position: Lower,
Front Axle Left, Front Axle Right -
Material: Rubber/
Metal, Plastic - Thickness [mm]: 51
- Inner Diameter [mm]: 21
-
Outer Diameter [mm]: 63,
71 - Name: Control arm bush left=right
- Quality class: PJ
- Construction Year to: 03.2008
-
Mounting Type: Rubber-
Metal Mount - Fitting Position: mounting
- Name: Control arm bush left=right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
SKODA FABIA/POLO 02-
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
SKODA FABIA/POLO 02-
(kvaliteediklass: PJ)"
- Fitting Position: Front
- General Information: bonded rubber bush; front; big
- Manufacturer: VIKA
-
Mounting Type: Rubber-
Metal Mount - Outer Diameter 1 [mm]: 72
- Outer Diameter 2 [mm]: 64
- Inner Diameter [mm]: 19
- Height [mm]: 52
-
Fitting Position: Front Axle,
Lower, both sides, Rear, inner - Manufacturer: TRW
SVHC: No information available, please contact the manufacturer!
- Construction Year to: 03.2008
- reinforced version:
- new version:
- Thickness [mm]: 51
- Inner Diameter [mm]: 19
-
Outer Diameter [mm]: 63,
71 -
Material: Rubber/
Metal -
Fitting Position: Lower,
Front Axle Left, Rear, Front Axle Right - Weight [kg]: 0.12
- Observe service information:
- Manufacturer: SWAG
- Name: SW 30 93 1253
Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Construction Year from: 03.2008
- Control/Trailing Arm Type: for control arm
-
Fitting Position: both sides,
Rear, Lower Front Axle - Axle alignment required after fitting:
-
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.12
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Rear Axle
- Weight [kg]: 0.17
- Height 1 [mm]: 58
- Height 2 [mm]: 40
- Inner Diameter [mm]: 10
-
Mounting Type: Rubber-
Metal Mount - Weight [g]: 170
- Outer Diameter 1 [mm]: 58
- Outer Diameter 2 [mm]: 66
- Manufacturer: METALCAUCHO
- Construction Year to: 03.2008
-
Mounting Type: Rubber-
Metal Mount - Fitting Position: mounting
- Name: Control arm bush left=right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
SEAT IBIZA/CORDOBA
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
SEAT IBIZA/CORDOBA
(kvaliteediklass: PJ)"
- Model Year from: 2006
-
Fitting Position: Front,
Lower Front Axle - Weight [kg]: 0.12
- Packaging length [cm]: 5.4
- Packaging width [cm]: 3.6
- Packaging height [cm]: 3.6
- Manufacturer: FEBEST
for PR number: 0AQ, 0AR, 0AS, 1AC, 1AL, 1AN, 1AP, 1AR, 1AT, 1LM, 1LN, 1LQ, 1LR, 1LT, 1N0, 1N1, 1N5, 1N6, 1ZF, 1ZG, 1ZH, 1ZN, L0L, L0R, QZ7
-
Fitting Position: Front Axle both sides,
Lower, Rear - Inner Diameter [mm]: 31
- Outer Diameter [mm]: 64
- Height [mm]: 52
- Name: ALT 83559AL
- Manufacturer: ALTE AUTOMOTIVE
- Quantity: 2
- Fitting Position: Rear
- General Information: bonded rubber bush
- Manufacturer: VIKA
-
Fitting Position: Front Axle both sides,
Lower, Rear - Mounting Type: Rubber Mount
- Control/Trailing Arm Type: for control arm
- Inner Diameter [mm]: 19
- Outer Diameter [mm]: 64
- Weight [kg]: 0.138
- Length [mm]: 52
- Manufacturer: RTS
-
Fitting Position: Front Axle,
Rear, both sides - reinforced version:
- Required quantity: 2
- Manufacturer: TEDGUM
- Name: TG 00721398
-
Vehicle Identification Number (VIN) to: 6L-
8- 157 034 -
Fitting Position: Front Axle,
both sides, Front - Control/Trailing Arm Type: for control arm
- Quantity per axle: 2
- Manufacturer: LEMFÃRDER
SVHC: No information available, please contact the manufacturer!
- Quality: OE Exact
-
Fitting Position: Front,
both sides - Colour: silver
- Weight [g]: 109
- Manufacturer: GATES PASKI PRZEWODY
-
Fitting Position: Rear,
Lower, Front Axle both sides - Required quantity: 2
- paired article number: VKDS 331011
- Name: SK VKDS331011
- Manufacturer: SKF
-
Fitting Position: Front Axle,
Rear - Quality: OE Exact
- Colour: silver
- Weight [g]: 114
- Manufacturer: GATES PASKI PRZEWODY
- Engine Code: BBZ
-
Vehicle Identification Number (VIN) from: 6L-
8- 157 034 -
Fitting Position: Lower Front Axle,
Rear - Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
-
Fitting Position: Front Axle,
Front -
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Required quantity: 1
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 33
- Outer Diameter 1 [mm]: 40
-
Warranty: 3 years warranty or until 75,
000km - Manufacturer: METZGER
- Model Year from: 2006
- Weight [kg]: 0.19
- Quantity: 2
- Packaging length [cm]: 9.2
- Packaging width [cm]: 2.5
- Packaging height [cm]: 2.5
- Manufacturer: FEBEST
-
Fitting Position: Front Axle,
both sides, Lower, Rear - Required quantity: 2
- reinforced version:
- Manufacturer: TEDGUM
- Name: TG 00727225
-
Fitting Position: Front Axle,
Rear - Vehicle Identification Number (VIN) to: 6L 8 157 034
- Weight [kg]: 0.2
- Outer Diameter [mm]: 63
- Control/Trailing Arm Type: for control arm
- Packaging length [cm]: 13.5
- Packaging width [cm]: 9.5
- Packaging height [cm]: 7
- Manufacturer: MONROE
-
Fitting Position: Rear,
Front Axle, both sides - reinforced version:
- Required quantity: 2
- Outer Diameter [mm]: 63
- Manufacturer: TEDGUM
- Construction Year to: 03.2008
- Inner Diameter [mm]: 18.6
- Outer Diameter [mm]: 63
- Length [mm]: 53
- paired article number: 271126
- Weight [kg]: 0.13
-
Installation Information: Important:
Observe Fitting Instructions - Manufacturer: A.B.S.
Fitting Position: behind the axle, Front Axle Left, Front Axle Right, inner
- Alternatively:
-
Fitting Position: Front Axle,
both sides, Rear - Control/Trailing Arm Type: for control arm
- Quantity per axle: 2
- Article number of recommended accessories: 37883 01
- Manufacturer: LEMFÃRDER
SVHC: No information available, please contact the manufacturer!
- Model Year from: 2006
-
Fitting Position: Rear,
Lower Front Axle - Weight [kg]: 0.189
- Packaging length [cm]: 6.1
- Packaging width [cm]: 6.1
- Packaging height [cm]: 4.1
- Manufacturer: FEBEST
- Model Year from: 2006
-
Fitting Position: Lower Front Axle,
Rear - Weight [kg]: 0.155
- Supplementary Article/Supplementary Info: with holder
- Supplementary Article/Info 2: without bracket
- Packaging length [cm]: 7.2
- Packaging width [cm]: 7.2
- Packaging height [cm]: 5.1
- Manufacturer: FEBEST
-
Material: PU
(Polyurethane) -
Fitting Position: Lower Front Axle,
both sides, Front - Inner Diameter [mm]: 12
-
Supplementary Article/Info 2: with grease cap,
with mounting manual - Required quantity: 2
- Manufacturer: TEDGUM
- Name: TG TED94751
- Fitting Position: Rear Axle
- Height [mm]: 90
- Weight [kg]: 0.63
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 69
-
Mounting Type: Rubber-
Metal Mount - Weight [g]: 630
- Manufacturer: METALCAUCHO
-
Material: PU
(Polyurethane) -
Fitting Position: Lower Front Axle,
both sides, Rear - Inner Diameter [mm]: 13
-
Supplementary Article/Info 2: with grease cap,
with mounting manual - Required quantity: 2
- Manufacturer: TEDGUM
- Name: TG TED87339
- Construction Year to: 03.2008
- reinforced version:
- new version:
- Thickness [mm]: 51
- Inner Diameter [mm]: 21
-
Outer Diameter [mm]: 63,
71 -
Material: Rubber/
Metal -
Fitting Position: Front Axle Left,
Rear, Front Axle Right - Weight [kg]: 0.49
-
Supplementary Article/Info 2: with screw set,
with nut - Observe service information:
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Construction Year to: 03.2008
- reinforced version:
- new version:
- Thickness [mm]: 51
- Inner Diameter [mm]: 21
-
Outer Diameter [mm]: 63,
71 -
Material: Rubber/
Metal -
Fitting Position: Front Axle Left,
Rear, Front Axle Right -
Supplementary Article/Info 2: with screw set,
with nut - Observe service information:
- Name: SW 30 93 9228
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Construction Year to: 03.2008
-
Mounting Type: Rubber-
Metal Mount - Fitting Position: mounting
- Name: Control arm bush left
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
AUDI A3 03-/GOLF V
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
AUDI A3 03-/GOLF V
(kvaliteediklass: PJ)"
-
Fitting Position: Rear,
Front Axle, both sides -
Material: PU
(Polyurethane) -
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- reinforced version:
- Outer Diameter [mm]: 63
- Supplementary Article/Supplementary Info: without roof rails
- Required quantity: 2
- Manufacturer: TEDGUM
- Name: TG 00727181
- Fitting Position: Front Axle Right
-
Manufacturer: ABAKUS DEPO/
LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.
- Fitting Position: Front Axle Left
-
Manufacturer: ABAKUS DEPO/
LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.
- Fitting Position: Front Axle Left
-
paired article number: ZWD-
VW- 001B - Material: Aluminium
-
Fabrication Number: ZWD-
VW- 001A - Manufacturer: NTY
-
Name: NTY ZWD-
VW- 001A
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: Front Axle Right
- Material: Aluminium
-
Fabrication Number: ZWD-
VW- 001B -
paired article number: ZWD-
VW- 001A - Manufacturer: NTY
-
Name: NTY ZWD-
VW- 001B
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Quantity: 1
- Fitting Position: Right
- General Information: console; right
- Manufacturer: VIKA
-
Fitting Position: Front Axle,
Left - Required quantity: 1
- Material: Aluminium
-
Alternative Repair Kit: F8-
8353S - Supplementary Article/Info 2: with rubber mount
-
paired article number: F8-
8354 - Manufacturer: OPTIMAL ZAWIESZENIE
- Quantity: 1
- Fitting Position: Left
- General Information: console; left
- Manufacturer: VIKA
- Fitting Position: Front Axle Right
-
Supplementary Article/Info 2: with bolts/
screws - paired article number: 55823Set
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Fitting Position: Front Axle Left
-
Supplementary Article/Info 2: with bolts/
screws - paired article number: 55824Set
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks