• Fitting Position: Rear
• Vehicle Identification Number (VIN) from: 1P-9-500001
• Sensor Type: Ultrasonic Sensor
• Number of pins: 3
• Lisainfo: Sensor, park assist sensor
• Additional information: Sensor, park assist sensor

• Vehicle Identification Number (VIN) to: 1P-8-052 500
• Fitting Position: Rear
• Number of connectors: 3
• Colour: black
• Lisainfo: Sensor, park assist sensor
• Additional information: Sensor, park assist sensor

• Fitting Position: Front, Rear
• Sensor Type: Ultrasonic Sensor
• Number of connectors: 3
• Lisainfo: Sensor, park assist sensor
• Additional information: Sensor, park assist sensor

• Construction Year from: 11.2007
• Construction Year to: 03.2009
• Fitting Position: Rear
• Sensor Type: Ultrasonic Sensor
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Weight [kg]: 0.02
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 28SKV908

• Supplementary Article/Info 2: with adhesive film, Holder may need adaptation
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Mounting Type: Glued
• Height 1 [mm]: 27.5
• Height 2 [mm]: 35
• Manufacturer: METZGER

• Fitting Position: both sides, Rear, Front, inner, outer
• Fabrication Number: EPDC-AU-007
• Manufacturer: NTY

• Construction Year to: 10.2007
• for PR number: 7X1
• Fitting Position: inner, Rear, both sides, Front, outer
• Fabrication Number: EPDC-AU-012

• Mounting Type: Glue on
• Vehicle Equipment: for vehicles with parking distance control
• Version: V99-72-0002
• Weight [kg]: 0.007
• Manufacturer: VEMO
• Lisainfo: V99-72-0002 VEM
• Additional information: V99-72-0002 VEM

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front, Rear
• Number of pins: 3
• Supplementary Article/Supplementary Info: with seal
• Fabrication Number: EPDC-VW-003

• Fitting Position: both sides, Rear, inner
• Fabrication Number: EPDC-PE-000

• Vehicle Identification Number (VIN) from: 1P-8-052 501
• Fitting Position: both sides, Rear
• Fabrication Number: EPDC-VW-001
• Manufacturer: NTY

• Fitting Position: Front, Rear
• Number of pins: 3
• Shape: angled

• Fitting Position: both sides, Rear
• Number of pins: 4
• Fabrication Number: EPDC-ME-002
• Name: NTY EPDC-ME-002
• Manufacturer: NTY

• Vehicle Identification Number (VIN) from: 1P-9-500001
• Fitting Position: Front, Rear
• Sensor Type: Ultrasonic Sensor
• Chemical Properties: Paintable
• Colour: black
• Number of pins: 3
• Supplementary Article/Supplementary Info: with seal
• Name: SENSOR, PARKIMISABI
• Manufacturer: MAX
• Lisainfo: 27-1293
• Additional information: 27-1293

• Fitting Position: Rear
• Construction Year from: 11.2007
• Construction Year to: 03.2009
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Front and Rear
• Voltage [V]: 12
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Number of pins: 3
• Weight [kg]: 0.04
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 28SKV038

• Fitting Position: Rear
• Colour: black
• Supplementary Article/Supplementary Info: with seal
• Manufacturer: MAGNETI MARELLI
• Name: MM SDP114

• Fitting Position: Left, Right
• Colour: black
• Supplementary Article/Supplementary Info: with seal
• Name: MM SDP097
• Manufacturer: MAGNETI MARELLI

• Name: Parking sensor
• Quality class: PJ

Lisainfo: (kvaliteediklass PJ)

• Fitting Position: Rear
• Sensor Type: Ultrasonic Sensor
• Number of pins: 3
• Colour: black
• Shape: angled
• Supplementary Article/Supplementary Info: with seal
• Surface: primed
• Number of connectors: 3
• Chemical Properties: Over-paintable
• Name: Parking sensor
• Quality class: PJ

Lisainfo: (kvaliteediklass PJ) Additional information: (kvaliteediklass PJ)

• Vehicle Identification Number (VIN) from: 1P-9-500001
• Fitting Position: outer, Rear, inner
• Sensor Type: Ultrasonic Sensor
• Colour: black
• Shape: angled
• Supplementary Article/Supplementary Info: with seal
• Surface: primed
• Number of connectors: 3
• Chemical Properties: Paintable
• Name: Parking sensor
• Quality class: PJ

Lisainfo: (kvaliteediklass PJ) Additional information: (kvaliteediklass PJ)

• Vehicle Identification Number (VIN) from: 1P-9-500001
• Fitting Position: Rear, Front
• Sensor Type: Ultrasonic Sensor
• Colour: black
• Shape: angled
• Supplementary Article/Supplementary Info: with seal
• Number of connectors: 3
• Chemical Properties: Paintable
• Name: Parking sensor
• Quality class: PJ

Lisainfo: (kvaliteediklass PJ) Additional information: (kvaliteediklass PJ)

• Engine Code: BKC, BLS, BXE
• Construction Year to: 02.2006, 10.2007
• Fitting Position: Rear
• Block Separation:
• Construction Year from: 11.2005
• Vehicle Identification Number (VIN) to: 1P..8..052500
• Sensor Type: Ultrasonic Sensor
• Name: SENSOR, PARKIMISABI
• Manufacturer: MAX
• Lisainfo: 27-1295
• Additional information: 27-1295

• Fitting Position: Rear
• Manufacturer: FAST

• Fitting Position: Rear, Front
• Sensor Type: Ultrasonic Sensor
• Length [mm]: 34
• Length from [mm]: 33.5
• Width [mm]: 45
• Height [mm]: 47
• Colour: black
• Shape: angled
• Supplementary Article/Supplementary Info: with seal
• Number of connectors: 3
• Chemical Properties: Over-paintable
• Name: Parking sensor
• Quality class: PJ

Lisainfo: (kvaliteediklass PJ) Additional information: (kvaliteediklass PJ)

• for OE number: 3D0 998 275 A
• Fitting Position: Rear, Front
• Name: SENSOR, PARKIMISABI
• Manufacturer: TRU

• for OE number: 3C0 919 275 S
• Fitting Position: Rear, Front
• Name: SENSOR, PARKIMISABI
• Manufacturer: TRU

• Number of pins: 3
• Plug Type: Female
• Number of circuits: 3
• Material: CuSn (copper-tin)
• Cable Length [mm]: 150
• Cable cross-section from [mm²]: 0.5
• Cable cross-section to [mm²]: 0.5
• Cable insulation material: Silicone
• Supplementary Article/Supplementary Info: with shrink squeeze connector
• Alternative Repair Kit: 2324065
• Manufacturer: METZGER

• Vehicle Identification Number (VIN) to: 1P-8-052 500
• Manufacturer Restriction: VAG
• Number of pins: 3
• Cable Length [mm]: 200
• Socket Width [mm]: 1.5
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Contact surface: Gold-plated
• Cable Cross Section [mm²]: 0.75
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Cable insulation material: Silicone
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, rattap””rete andur
• Manufacturer: HBE

• Number of pins: 3
• Fitting Position: Rear, Front

• Name: Parking sensor
• Quality class: PJ

Lisainfo: (kvaliteediklass PJ)

• Vehicle Identification Number (VIN) from: 1P-8-052-501
• Vehicle Identification Number (VIN) to: 1P-9-057-500
• Fitting Position: Rear
• Colour: black
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 3
• Chemical Properties: Paintable
• Housing Colour: black
• Manufacturer: ERA

• Fitting Position: Rear
• Vehicle Identification Number (VIN) from: 1P-9-500001
• Sensor Type: Ultrasonic Sensor
• Chemical Properties: Paintable
• Colour: black
• Colour Code: 9B9
• Number of pins: 3
• Supplementary Article/Supplementary Info: with seal
• Always compare old and new part (in particular OE No.):
• Name: SENSOR, PARKIMISABI
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Construction Year from: 11.2007
• Construction Year to: 03.2009
• Fitting Position: both sides, Rear
• Quantity: 4
• for PR number: 7X1
• Vehicle Identification Number (VIN) from: 1P-8-052 501
• Vehicle Identification Number (VIN) to: 1P-9-057 500
• Supplementary Article/Supplementary Info: with gaskets/seals
• Diameter [mm]: 15.36
• Chemical Properties: Paintable
• Name: Sensor, parkimisabi
• Manufacturer: TRI

• Vehicle Identification Number (VIN) from: 1P-8-052 501
• Manufacturer Restriction: VAG
• Plug Type ID: Code A
• Cable Length [mm]: 175
• Number of pins: 3
• Cable Cross Section [mm²]: 0.75
• Contact surface: Silver-plated
• Cable insulation material: Silicone
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, heitgaasi rohuandur
• Manufacturer: HBE

• Fitting Position: Rear
• Vehicle Identification Number (VIN) to: 1P-8-052500
• Sensor Type: Ultrasonic Sensor
• Colour: black
• Chemical Properties: Paintable
• Number of pins: 3
• Supplementary Article/Supplementary Info: with seal
• Always compare old and new part (in particular OE No.):
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Construction Year from: 11.2007
• Construction Year to: 03.2009
• Fitting Position: both sides, Rear
• for PR number: 7X1
• Vehicle Identification Number (VIN) from: 1P_8_052 501
• Vehicle Identification Number (VIN) to: 1P_9_057 500
• Chemical Properties: Over-paintable
• Colour: black
• Number of pins: 3
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Name: Sensor, parkimisabi
• Manufacturer: MEY

• Required quantity: 4
• Fitting Position: Rear
• Block Separation:
• Vehicle Identification Number (VIN) to: 1P-8-052 500
• Sensor Type: Ultrasonic Sensor
• Article number of recommended accessories: 2324100
• Manufacturer: METZGER

• Fitting Position: Rear
• Colour: black
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Supplementary Article/Supplementary Info: with seal
• Surface: primed
• Number of pins: 3
• Number of connectors: 3
• Chemical Properties: Over-paintable
• Housing Colour: black
• See accessories list for additionally required parts:
• Article number of recommended accessories: V99-72-0002
• Weight [kg]: 0.018
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear
• Sensor Type: Ultrasonic Sensor
• Colour: black
• Diameter [mm]: 15.5
• Number of pins: 3
• Connector Shape: oval
• for OE number: 1S0 919 275
• Manufacturer: MEAT&DORIA

• Fitting Position: Front, Rear
• Length [mm]: 40
• Width [mm]: 23
• Height [mm]: 26
• Colour: black
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Supplementary Article/Supplementary Info: with seal
• Surface: primed
• Number of pins: 3
• Number of connectors: 3
• Chemical Properties: Paintable
• Housing Colour: black
• Weight [kg]: 0.014
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 11.2007
• Construction Year to: 03.2009
• Required quantity: 4
• Fitting Position: both sides, Rear
• for PR number: 7X1
• Vehicle Identification Number (VIN) from: 1P_8_052 501
• Vehicle Identification Number (VIN) to: 1P_9_057 500
• Number of pins: 3
• Chemical Properties: Paintable
• Mounting Type: Plugged
• Socket colour: black
• Shape: angled
• Supplementary Article/Supplementary Info: with fastening ring
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PX358141201
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year from: 03.2009
• Sensor Type: Ultrasonic Sensor
• Fitting Position: Front, Rear
• Surface: primed
• Number of pins: 3
• Shape: angled
• Manufacturer: AIC

Installation Information: Attention, test the sensor for function before painting. General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Rear
• Construction Year from: 11.2007
• Construction Year to: 03.2009
• Sensor Type: Ultrasonic Sensor
• Colour: black
• Number of pins: 3
• Connector Shape: oval
• for OE number: 7L5 919 275 B
• Name: Sensor, parkimisabi
• Manufacturer: MD

• Construction Year to: 10.2007
• Required quantity: 4
• Fitting Position: both sides, Rear
• for PR number: 7X1
• Vehicle Identification Number (VIN) to: 1P_8_052 500
• Number of pins: 3
• Chemical Properties: Paintable
• Mounting Type: Plugged
• Socket colour: black
• Shape: angled
• Supplementary Article/Supplementary Info: with fastening ring
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PX358141101
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: Rear
• Construction Year from: 03.2009
• Sensor Type: Ultrasonic Sensor
• Number of pins: 3
• Chemical Properties: Paintable
• Version: AM
• Manufacturer: METZGER

• Fitting Position: Rear, Front
• Length [mm]: 33.5
• Width [mm]: 45
• Height [mm]: 47
• Colour: black
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Supplementary Article/Supplementary Info: with seal
• Number of connectors: 3
• Chemical Properties: Over-paintable
• Housing Colour: black
• Weight [kg]: 0.04
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear
• Construction Year from: 03.2009
• Sensor Type: Ultrasonic Sensor
• Number of pins: 3
• Chemical Properties: Paintable
• Connector Shape: angled
• Version: OE
• Manufacturer: METZGER

• Required quantity: 4
• Fitting Position: Rear, Front
• Block Separation:
• Vehicle Identification Number (VIN) to: 1P-8-052 500
• Surface: primed
• Supplementary Article/Info 2: with plug
• Number of pins: 3
• Length [mm]: 33.5
• Width [mm]: 45
• Height [mm]: 47
• Colour: black
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Chemical Properties: Over-paintable
• Housing Colour: black
• Weight [kg]: 0.076
• for OE number: 3D0 998 275 A
• Manufacturer: VEMO GERMANY

Supplementary Article/Supplementary Info: with shrink squeeze connector, with cable set, with seal General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Sensor Type: Ultrasonic Sensor
• Chemical Properties: Paintable
• Length [mm]: 41
• Width [mm]: 22
• Height [mm]: 26.3
• Number of pins: 3
• Diameter [mm]: 15.5
• Weight [kg]: 0.03
• Name: SENSOR, PARKIMISABI
• Manufacturer: VAL

Fitting Position: Front and Rear, outer, inner, Left, Right, Front, Rear

• Quality class: Q

Lisainfo: "Tootja: VALEO
(kvaliteediklass: Q)"

• Supplementary Article/Info 2: with sensor
• Number of sensors: 4
• Fitting Position: Front, Rear
• Colour: black, Mat
• Sensor Type: Ultrasonic Sensor
• Vehicle Equipment: for vehicles with trailer hitch
• Gauge: without Display
• Mounting Type: mounting
• Rated Voltage [V]: 12
• Range from [m]: 0.1
• Range to [m]: 1.7
• for vehicle width to [m]: 2.2
• Height adjustment from [cm]: 40
• Height adjustment to [cm]: 65
• Parking distance control sensor reflection angle: Sensor reflection angle: 0 to 5 degrees
• Parameter Programming, PPS (parking distance control): with parameter programming PPS
• Mounting Time from (in hours): 1.5
• DIN/ISO: 17386
• Chemical Properties: Paintable
• Weight [kg]: 1.2
• Name: PARKIMISABI
• Manufacturer: VAL
• Lisainfo: VAL632200
• Additional information: VAL632200

Parking distance control activation: with acoustic warn function, with radio muting, Activation optional through switch, Activation through reverse gear Trailer Hitch: with automatic parking distance control deactivation General Information: Activation of the front sensors through the main brake

• Supplementary Article/Info 2: with sensor
• Number of sensors: 4
• Fitting Position: Front, Rear
• Colour: black, Mat
• Sensor Type: Ultrasonic Sensor
• Vehicle Equipment: for vehicles with trailer hitch
• Gauge: without Display
• Mounting Type: Plugged
• Rated Voltage [V]: 12
• Range from [m]: 0.1
• Range to [m]: 1.7
• for vehicle width to [m]: 2.2
• Height adjustment from [cm]: 40
• Height adjustment to [cm]: 65
• Parking distance control sensor reflection angle: Sensor reflection angle: 0 to 5 degrees
• Parameter Programming, PPS (parking distance control): with parameter programming PPS
• Mounting Time from (in hours): 1.5
• DIN/ISO: 17386
• Chemical Properties: Paintable
• Weight [kg]: 1.2
• Manufacturer: VALEO

Parking distance control activation: with acoustic warn function, with radio muting, Activation optional through switch, Activation through reverse gear Trailer Hitch: with automatic parking distance control deactivation

• Engine Code: BKC, BLS, BXE
• Construction Year to: 02.2006, 10.2007
• Fitting Position: Rear
• Block Separation:
• Construction Year from: 11.2005
• Vehicle Identification Number (VIN) to: 1P..8..052500
• Sensor Type: Ultrasonic Sensor
• Name: SENSOR, PARKIMISABI
• Manufacturer: BOS

• Supplementary Article/Info 2: with sensor
• Number of sensors: 4
• Fitting Position: Front, Rear
• Colour: black, Mat
• Sensor Type: Ultrasonic Sensor
• Vehicle Equipment: for vehicles with trailer hitch
• Gauge: with LCD colour display
• Mounting Type: mounting
• Rated Voltage [V]: 12
• Range from [m]: 0.1
• Range to [m]: 1.7
• for vehicle width to [m]: 2.2
• Height adjustment from [cm]: 40
• Height adjustment to [cm]: 65
• Parking distance control sensor reflection angle: Sensor reflection angle: 0 to 5 degrees
• Parameter Programming, PPS (parking distance control): with parameter programming PPS
• Mounting Time from (in hours): 1.5
• DIN/ISO: 17386
• Chemical Properties: Paintable
• Weight [kg]: 1.22
• Manufacturer: VALEO

Parking distance control activation: with acoustic warn function, with radio muting, Activation optional through switch, Activation through reverse gear Trailer Hitch: with automatic parking distance control deactivation General Information: Activation of the front sensors through the main brake

• Supplementary Article/Info 2: with sensor
• Number of sensors: 8
• Fitting Position: Front and Rear
• Colour: black, Mat
• Sensor Type: Ultrasonic Sensor
• Vehicle Equipment: for vehicles with trailer hitch
• Gauge: with LCD colour display
• Mounting Type: mounting
• Rated Voltage [V]: 12
• Range from [m]: 0.1
• Range to [m]: 1.7
• for vehicle width to [m]: 2.2
• Height adjustment from [cm]: 40
• Height adjustment to [cm]: 65
• Parking distance control sensor reflection angle: Sensor reflection angle: 0 to 5 degrees
• Parameter Programming, PPS (parking distance control): with parameter programming PPS
• Trailer Hitch: without parking distance control deactivation
• Mounting Time from (in hours): 3
• DIN/ISO: 17386
• Chemical Properties: Paintable
• Weight [kg]: 2.08
• Name: PARKIMISABI
• Manufacturer: VAL
• Lisainfo: VAL632202
• Additional information: VAL632202

Parking distance control activation: with acoustic warn function, with radio muting, Activation optional through switch, Activation through reverse gear General Information: Activation of the front sensors through the main brake