• Vehicle Identification Number (VIN) from: 1P-6-000 001
• Model Year to: 2013
• Rated current [A]: 40
• Combi Switch Function: Normally Open Contact
• Temperature range to [°C]: 85
• Resistor [Ohm]: 560
• Connector type: 1x 2,8 mm, 2x 6,3 mm, 2x 9,5 mm
• Number of pins: 5
• Manufacturer: JP GROUP
• Lisainfo: Multifunctional Relay
• Additional information: Multifunctional Relay

Relay function: Restart lock, Clamp 15, Terminal 50, Start-stop system, Starter, Engine control unit, Normally open contact

• Engine Code: BXE, BLS
• Number of connectors: 9
• Weight [kg]: 0.07
• Manufacturer: FEBI
• Additional information: 100 658 HP
• Lisainfo: 100 658 HP

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Supplementary Article/Supplementary Info: without holder
• Housing Type: Synthetic Material Housing
• Number of pins: 5
• Rated Voltage [V]: 12
• Rated current [A]: 30
• Temperature range from [°C]: -40
• Temperature range to [°C]: 100
• General Information: relay
• Manufacturer: VIKA

Combi Switch Function: without light dimmer function, Normally Open Contact

• Number of connectors: 4
• Rated Voltage [V]: 12
• Rated current [A]: 40
• Temperature range from [°C]: -40
• Temperature range to [°C]: 85
• General Information: relay
• Manufacturer: VIKA

• Relay Number: 449
• Rated Voltage [V]: 12
• Number of pins: 4
• Relay function: Normally open contact, X contact relief
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Relay function: Daytime Running Light
• Combi Switch Function: Changeover Contact
• Name: Mitme funktsiooniga relee
• Manufacturer: MAX

• Engine Code: BXE
• Name: RELEE, KšTUSEPUMP
• Manufacturer: MAX

• for OE number: 1K0 951 253
• Current Strength [A]: 30
• Voltage [V]: 12
• Number of pins: 4
• Relay function: Central electrics
• Temperature range from [°C]: -40
• Temperature range to [°C]: 100
• Resistor [Ohm]: 27
• Manufacturer: BOSCH

• Model Year to: 2010
• Relay function: Sunroof
• Combi Switch Function: Normally Open Contact
• Voltage [V]: 12
• Name: Mitme funktsiooniga relee
• Manufacturer: MAX

• Number of connectors: 4
• Manufacturer: JP GROUP

Lisainfo: Relay for fuel pump and intake manifold heating, 12 Volt, 40 Amp Additional information: Relay for fuel pump and intake manifold heating, 12 Volt, 40 Amp

• for OE number: 4H0 951 253 C
• Current Strength [A]: 30
• Voltage [V]: 12
• Number of pins: 5
• Relay function: Normally open contact
• Protection Type (IP Code): IP5K4
• Temperature range from [°C]: -40
• Temperature range to [°C]: 100
• Resistor [Ohm]: 16
• Name: JUHTSEADE,HOOGEAEG
• Manufacturer: BOS

• Voltage [V]: 12
• Number of pins: 4
• Capacity at 12V: 40A
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Operating voltage [V]: 12
• Rated current [A]: 20, 40
• Combi Switch Function: Changeover Contact
• Temperature range from [°C]: -40
• Temperature range to [°C]: 85
• Resistor [Ohm]: 680
• Length [mm]: 23
• Width [mm]: 15
• Height [mm]: 26
• Connector type: 3x 4,8 mm, 2x 6,3 mm
• Number of pins: 5
• Name: MITME FUNKTSIOONIGA RELEE
• Manufacturer: MEY
• Lisainfo: 1148300001
• Additional information: 1148300001

Relay function: Terminal 50, Terminal 75, Heated windscreen, Remote Lock, boot-/ loading bay hatch, Low Beam, Heated rear window, Surge protection, Normally open contact, Daytime Running Light, Cigarette Lighter, Interior Blower, Auxiliary Water Pump, Electric booster heater, Washer Fluid Pump, windscreen, headlight cleaning, Starter, Parking Light, Clamp 15, Klaxon, Trumpet Horns, Engine control unit

• Voltage [V]: 12
• Rated current [A]: 40
• Number of pins: 4
• Combi Switch Function: Normally Open Contact
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Operating voltage [V]: 12
• Rated current [A]: 10, 30
• Combi Switch Function: Changeover Contact
• Temperature range from [°C]: -40
• Temperature range to [°C]: 120
• Resistor [Ohm]: 560
• Length [mm]: 23
• Width [mm]: 15
• Height [mm]: 26
• Connector type: 2x 6,3 mm, 3x 4,8 mm
• Number of pins: 5
• Name: MITME FUNKTSIOONIGA RELEE
• Manufacturer: MEY

Relay function: Electric booster heater, Normally open contact, Fuel Filler Cap, Trumpet Horns, Seat Heating, Indicator, Daytime Running Light, Air Conditioning, Parking Heater, Central Locking, Window Regulator, Trailer stop light, Washer Fluid Pump, windscreen, Heatable exterior mirror, Terminal 50, Water pump after-run, Roof ventilation, Terminal 61, Auxiliary Water Pump, Fan, engine cooling, headlight cleaning, Hinged Window, Exterior Rearview Mirror Adjustment

• for OE number: 004 545 2905
• Current Strength [A]: 20
• Number of connectors: 5
• Relay function: Normally open contact
• Voltage [V]: 12
• Name: MITME FUNKTSIOONIGA RELEE
• Manufacturer: TRU

• General Information: relay
• Manufacturer: VIKA

• General Information: relay
• Manufacturer: BORSEHUNG

• Number of pins: 4
• Voltage [V]: 12
• Current Strength [A]: 70
• Relay function: Normally open contact
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• General Information: relay
• Manufacturer: BORSEHUNG

• Engine Code: BXE
• Relay Number: 67, 80, 167
• Number of connectors: 4
• Weight [kg]: 0.035
• Name: RELEE, KšTUSEPUMP
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Model Year to: 2010
• Operating voltage [V]: 12
• Rated Power [W]: 480
• Rated current [A]: 40
• Combi Switch Function: Normally Open Contact
• Length [mm]: 28
• Width [mm]: 28
• Height [mm]: 25
• Connector type: 2x 6,3 mm, 2x 9,5 mm
• Number of pins: 4
• Name: MITME FUNKTSIOONIGA RELEE
• Manufacturer: MEY

Relay function: Fuel Pump, Engine control unit, Surge protection, Suction pipe pre-heating, Interior Blower, Heated rear window, Battery main switch, Heated windscreen, Fan, heater/air conditioning, Rear window wiper, Water pump after-run, Secondary Air System, Electric booster heater, engine cooling, Normally open contact, Clamp 15, Parking Heater, X contact relief, Window Regulator, Terminal 75, Sunroof, Pump, fuel pre-supply, Start-stop system, Magnetic clutch

• Weight [kg]: 0.04
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 96SKV005

• Voltage [V]: 12
• Current Strength [A]: 30
• Weight [kg]: 0.025
• Number of connectors: 4
• Supplementary Article/Supplementary Info: with holder
• General Information: relay
• Manufacturer: BORSEHUNG

• General Information: relay
• Manufacturer: BORSEHUNG

• for relay slot number: 15, 75
• Relay Number: 460
• Block Separation:
• Rated Voltage [V]: 12
• Relay function: Normally open contact
• Number of pins: 4
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Combi Switch Function: Changeover Contact
• Relay function: Normally open contact
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Vehicle Identification Number (VIN) from: 1P-6-000 001
• Code Letter: 460
• Supplementary Article/Info 2: with resistor
• Voltage [V]: 12
• Rated current [A]: 60
• Number of used contacts: 4
• Relay function: Central electrics
• Weight [kg]: 0.035
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 4
• Voltage [V]: 12
• Rated current [A]: 15
• Combi Switch Function: Normally Open Contact
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Relay function: Central electrics
• Current Strength [A]: 30
• Voltage [V]: 12
• Number of pins: 4
• Manufacturer: MEAT&DORIA

• Operating voltage [V]: 12
• Rated current [A]: 40
• Combi Switch Function: Normally Open Contact
• Length [mm]: 28
• Width [mm]: 28
• Height [mm]: 24.5
• Connector type: 1x 6,3 mm, 2x 9,5 mm, 1x 2,8 mm
• Number of pins: 4
• Name: MITME FUNKTSIOONIGA RELEE
• Manufacturer: MEY

Relay function: Fuel Pump, Exterior Rearview Mirror Adjustment, Normally open contact, Fan, engine cooling, Suction pipe pre-heating

• for OE number: 2D0 959 145 A
• Current Strength [A]: 15
• Voltage [V]: 12
• Relay function: Normally open contact
• Manufacturer: BOSCH

• for OE number: 7N0 951 253
• Combi Switch Function: Normally Open Contact
• Current Strength [A]: 30
• Voltage [V]: 12
• Number of pins: 4
• Relay function: Normally open contact
• Temperature range from [°C]: -40
• Temperature range to [°C]: 100
• Resistor [Ohm]: 16
• Name: RELEE
• Manufacturer: BOS

• Engine Code: BXE
• Current Strength [A]: 40
• Relay function: Terminal 30, Clamp 87
• Rated current [A]: 40
• Weight [kg]: 0.04
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Current Strength [A]: 15
• Relay function: Terminal 30, Clamp 87
• Number of pins: 4
• Voltage [V]: 12
• Colour: black
• Weight [kg]: 0.033
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Quantity: 1
• Construction Year from: 05.2009
• Construction Year to: 05.2009
• General Information: control unit for radiator fan
• Manufacturer: VIKA

• Weight [kg]: 0.04
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Vehicle Identification Number (VIN) from: 1P-6-000 001
• Voltage [V]: 12
• Current Strength [A]: 30
• Number of pins: 4
• Relay Number: 449
• Supplementary Article/Info 2: with resistor
• Housing Colour: black
• Manufacturer: VEMO GERMANY

Relay function: Trumpet Horns, Low Beam, Interior Blower, Starter, Fuel Pump, Radiator Fan Overrun General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Voltage [V]: 12
• Colour: black
• Number of pins: 4
• Number of connectors: 4
• Rated Voltage [V]: 12
• Relay function: Clamp 87, Terminal 30, Normally open contact
• Supplementary Article/Info 2: with resistor
• Housing Colour: black
• Rated current [A]: 70
• Weight [kg]: 0.04
• Fitting Position: Engine Compartment
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• for OE number: 8E0 951 253
• Combi Switch Function: On/Off Switch
• Current Strength [A]: 70
• Voltage [V]: 12
• Number of pins: 4
• Relay function: Normally open contact
• Housing Type: Housing with Plastic Lid
• Protection Type (IP Code): IP20
• Temperature range from [°C]: -40
• Temperature range to [°C]: 85
• Housing Colour: black
• Resistor [Ohm]: 63
• Length [mm]: 28
• Width [mm]: 28
• Height [mm]: 40
• Manufacturer: BOSCH

• for OE number: 019 193 750 3
• Current Strength [A]: 70
• Voltage [V]: 12
• Number of pins: 4
• Relay function: Normally open contact
• Temperature range from [°C]: -40
• Temperature range to [°C]: 85
• Manufacturer: BOSCH

• Fitting Position: Driver side
• Relay Number: 109
• Supplementary Article/Info 2: Mini Relay, with resistor
• Supplementary Article/Supplementary Info: without holder
• Protection Type (IP Code): IP54
• Voltage [V]: 12
• Temperature range from [°C]: -40
• Temperature range to [°C]: +70
• Colour: black
• Inductive Load [A]: 15
• Capacitive Load [A]: 15
• Ohmic Load [A]: 15
• Number of pins: 4
• Wiring Diagramme: X
• Combi Switch Function: Normally Open Contact
• Plug Type ID: X
• Assy./disassy. by qualified personnel required!:
• Name: HE 4RA007507081
• Manufacturer: HELLA

Relay function: Central electrics, Comfort Equipment Variant (trim package), Parking Distance Control, ABS, Low Beam, High Beam, Heated rear window, ESP, Window Regulator, Starter, Klaxon, Air Conditioning, Light switch, Fan, heater/air conditioning, Interior Blower, Clamp 15, Daytime Running Light, Convertible top hydraulics, Central Locking, ABS recovery pump, Exterior Rearview Mirror Adjustment, Heatable exterior mirror, Electric booster heater, Interior Lighting, Clamp 15R, Clamp 87, Fuel Pump, Lambda Sensor, engine cooling, Front Fog Light, Windscreen wiper, Windscreen wiper rest heating, Sunroof, Secondary Air System, Seat Heating Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Colour: grey
• Number of connectors: 5
• Rated Voltage [V]: 12
• Relay function: Normally open contact, Terminal 30, Clamp 87
• Voltage [V]: 12
• Fitting Position: Engine Compartment
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Voltage [V]: 12
• Capacity at 12V: 40A
• Colour: white
• Number of pins: 5
• Combi Switch Function: Normally Open Contact
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 4RA007507021

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Vehicle Identification Number (VIN) to: 1M-3-067 600
• Voltage [V]: 12
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 4RP008189151

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of connectors: 10
• Rated current [A]: 60
• Manufacturer: MEAT&DORIA

• Fabrication Number: EZP-VW-004
• Number of connectors: 9

• Engine Code: BXE, BLS
• Construction Year from: 11.2005
• Number of Cylinders: 4
• Glow Plug Design: after-glow capable
• Voltage [V]: 12
• Warranty: 5 years warranty
• Manufacturer: HUCO
• Name: HU 132106

General Information: Recommendation: Use grease for glow plugs 134100 = 10g. or 134101 = 100g., see accessory lists.

• Engine Code: BXE, BLS
• Construction Year from: 11.2005
• Number of Cylinders: 4
• Glow Plug Design: after-glow capable
• Voltage [V]: 12
• Manufacturer: HUCO

General Information: Recommendation: Use grease for glow plugs 134100 = 10g. or 134101 = 100g., see accessory lists.

• Voltage [V]: 12
• Current Strength [A]: 60
• Number of connectors: 10
• Weight [kg]: 0.172
• Fitting Position: Engine Compartment
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of Cylinders: 4
• Glow Plug Design: after-glow capable
• Voltage [V]: 12
• Warranty: 5 years warranty
• Name: RELEE, HOOGSšSTEEM
• Manufacturer: HUC

General Information: Recommendation: Use grease for glow plugs 134100 = 10g. or 134101 = 100g., see accessory lists.

• Vehicle Identification Number (VIN) to: 1P-6-075000
• Number of Cylinders: 4
• Glow Plug Design: after-glow capable
• Voltage [V]: 12
• Warranty: 5 years warranty
• Name: RELEE, HOOGSšSTEEM
• Manufacturer: HUC

General Information: Recommendation: Use grease for glow plugs 134100 = 10g. or 134101 = 100g., see accessory lists.

• Engine Code: BLS, BXE
• Construction Year from: 11.2005
• Voltage [V]: 12
• Number of Cylinders: 4
• Glow Plug Design: after-glow capable
• Manufacturer: METZGER

• Vehicle Identification Number (VIN) to: 1P-6-075000
• Voltage [V]: 12
• Number of Cylinders: 4
• Glow Plug Design: after-glow capable
• Manufacturer: METZGER