• Number of pins: 4
• Supplementary Article/Info 2: without cable
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Number of pins: 6
• Supplementary Article/Info 2: without cable, with plastic socket
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Supplementary Article/Info 2: with plug, without cable
• for OE number: 4D0971993
• Number of pins: 3
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• for OE number: 4D0971993
• Supplementary Article/Info 2: with plug, with cable
• Number of pins: 3
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Supplementary Article/Info 2: without cable
• Socket colour: black
• Fabrication Number: ESS-VW-000
• Manufacturer: NTY

• Engine Code: CUSA
• Colour: grey
• Thread Size: M12x1,5
• Spanner Size: 17
• Manufacturer: FACET

• Engine Code: CUSA
• Colour: grey
• Thread Size: M12x1,5
• Spanner Size: 17
• Name: EP 1.830.378
• Manufacturer: EPS

Manufacturer: MAGNETI MARELLI

• Number of pins: 2
• Connector Shape: D Shape
• Supplementary Article/Info 2: without cable
• for OE number: 1205185
• Manufacturer: MEAT&DORIA

• Thread Size: M 12x1.5
• Number of pins: 2
• Housing Colour: brown
• Manufacturer: FAE

• Quantity: 1
• Weight [kg]: 0.48
• Number of connectors: 2
• Colour: black
• General Information: knock sensor
• Manufacturer: VIKA

• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV168

• Number of pins: 3
• Name: DE SS12308-12B1
• Manufacturer: DELPHI

• Engine Code: CUSA
• Thread Size: M12x1,5
• Spanner Size: 16
• Manufacturer: FACET

• Fabrication Number: ECP-VW-009
• Manufacturer: NTY

• Number of pins: 2
• Connector Shape: oval
• Socket colour: black
• Thread Size: M12x1,5
• Sensor Type: NTC Sensor
• Spanner Size: 17
• for OE number: 04L919824C
• Manufacturer: MEAT & DORIA

• Number of pins: 4
• Plug Type: Female
• Number of circuits: 4
• Cable insulation material: Silicone
• Material: CuSn (copper-tin)
• Cable Length [mm]: 250
• Cable cross-section from [mm²]: 0.5
• Cable cross-section to [mm²]: 0.5
• Manufacturer: 3RG

• Connector Shape: D Shape
• Fabrication Number: ECM-AU-008
• Manufacturer: NTY

• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: FAE ELEKTRYKA

• Number of pins: 4
• Manufacturer: JPN

• Engine Code: CUSA
• Housing Colour: black
• Manufacturer: FACET

• Engine Code: CUSA
• Housing Colour: black
• Name: EP 1.957.144
• Manufacturer: EPS

• Number of connectors: 4
• Weight [kg]: 0.027
• for OE number: 03K 906 051
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of connectors: 4
• Weight [kg]: 0.027
• for OE number: 03K 906 051
• Name: SW 33 10 4301
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Voltage [V]: 12
• Number of pins: 2
• Tightening Torque [Nm]: 20
• Supplementary Article/Info 2: without cable
• Corresponds to the original part in colour: black
• Plug Type: Blade Terminal
• Connector Shape: oval
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PG013114301

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: CUSA
• Manufacturer: FACET

• Engine Code: CUSA
• Name: EP 1.953.774
• Manufacturer: EPS

• Manufacturer: BOSCH
• Name: BS 0261231146

• Number of pins: 2
• Manufacturer: DELPHI
• Name: DE AS10169

• Housing Colour: black
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Required quantity: 1
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Thread Size: M12x1,5
• Number of pins: 2
• Connector Shape: oval
• Colour: black
• Version: IAM
• Article number of recommended accessories: 0899250
• Manufacturer: METZGER

• Number of pins: 4
• Pressure from [kPA]: 49
• Manufacturer: DELPHI

• General Information: hall sender camshaft
• Manufacturer: VIKA

• Name: BS 0281006059
• Manufacturer: BOSCH

• Outer Diameter [mm]: 12
• Number of connectors: 3
• Weight [kg]: 0.015
• for OE number: 05E 907 601 D
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fuel Mixture Formation: Direct Injection
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.07
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV409

Manufacturer: BOSCH OSPRZET SILNIK BENZYNOWY

• Required quantity: 2
• Overall Length [mm]: 70
• Number of pins: 2
• Connector Shape: oval
• Socket colour: black
• Spanner Size: 16
• Sensor Type: NTC Sensor
• Manufacturer: VALEO

• Exhaust System: before soot particulate filter
• Number of pins: 3
• Opening pressure [kPa]: 14.5
• Name: DE DPS00024-12B1
• Manufacturer: DELPHI

• General Information: pressure sensor
• Manufacturer: VIKA

• Engine Code: CUSA
• Exhaust System: before soot particulate filter
• Output Voltage, from [V]: 0.5
• Output Voltage, up to [V]: 4.5
• Manufacturer: FACET

• Exhaust System: before soot particulate filter
• Manufacturer: NRF

• Number of pins: 3
• Colour: black
• Manufacturer: AIC

Exhaust System: for vehicles with factory fitted soot -/particulate filter General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Mounting Type: Bolted
• Supplementary Article/Supplementary Info: with gaskets/seals
• Number of pins: 3
• Sensor Type: Impulse Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU013122221

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Mounting Type: Bolted
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PP358152261
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: CUSA
• Pressure from [kPA]: 29
• Pressure to [kPA]: 400
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.48
• Name: EP 1.993.235
• Manufacturer: EPS

• Number of pins: 3
• Manufacturer: FAE

Manufacturer: NRF KLIMATYZACJA

• Colour: black
• Number of pins: 4
• Pressure from [kPA]: 50
• Pressure to [kPA]: 400
• Manufacturer: FAE

• Fuel Mixture Formation: Common Rail (CR)
• Pressure to [bar]: 2,200
• Number of pins: 3
• Socket colour: black
• Manufacturer: FAE ELEKTRYKA

• Voltage [V]: 12
• Number of pins: 2
• Tightening Torque [Nm]: 20
• Supplementary Article/Info 2: without cable
• Corresponds to the original part in colour: black
• Plug Type: Blade Terminal
• Connector Shape: oval
• Quantity: 1
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PG009108561
• Manufacturer: HELLA

SVHC: 1317-36-8; Lead monoxide (lead oxide), 12060-00-3; Lead titanium trioxide, 7439-92-1; Lead Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Exhaust System: before soot particulate filter
• Mounting Type: Bolted
• Number of pins: 3
• Diameter 1 [mm]: 8
• Diameter 2 [mm]: 8
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PP009409621
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year from: 07.2015
• Guarantee: 3 years guarantee
• New Part:
• Used part return not required:
• Weight [kg]: 0.23
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 07SKV156

• Supplementary Article/Info 2: without cable
• Fitting Depth [mm]: 24
• Number of pins: 3
• Version: IAM
• Manufacturer: METZGER

• for OE number: 04L 907 601
• Width [mm]: 67
• Height [mm]: 68
• Length [mm]: 40
• Guarantee: 3 years guarantee
• Voltage [V]: 12
• Manufacturer: AT AUTOTEILE GERMANY

General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Version: IAM
• Manufacturer: METZGER

• Number of pins: 3
• Connector Shape: D Shape
• Number of circuits: 2
• Number of mounting bores: 1
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Guarantee: 3 years guarantee
• New Part:
• Used part return not required:
• Weight [kg]: 0.23
• Always compare old and new part (in particular OE No.):
• Name: CE 07SKV230
• Manufacturer: ESEN SKV

• Engine Code: CUSA
• for OE number: 04L 906 088 CH
• Cable Length [mm]: 345
• Number of pins: 2
• Connector Shape: D Shape
• Guarantee: 3 years guarantee
• Exhaust System: before soot particulate filter
• Socket colour: brown
• Weight [kg]: 0.08
• Shape: Bent
• Always compare old and new part (in particular OE No.):
• Name: CE 30SKV366
• Manufacturer: ESEN SKV

• Construction Year from: 07.2015
• Exhaust System: before soot particulate filter
• Manufacturer: ASHIKA

• Number of connectors: 3
• External Thread [mm]: M18 X 1,5 MM
• Spanner Size: 27
• Tightening Torque [Nm]: 100
• Manufacturer: PIERBURG

• Fabrication Number: EGT-VW-051
• Cable Length [mm]: 370
• Manufacturer: NTY

Lisainfo: ENG. 1.4TDI VW POLO V 14-, SKODA FABIA III 14-, SEAT IV 15-16 /PRZED TURBOSPRARK¸ Additional information: ENG. 1.4TDI VW POLO V 14-, SKODA FABIA III 14-, SEAT IV 15-16 /PRZED TURBOSPRARK¸

• External Thread Size: M18 x 1,5
• Number of connectors: 3
• Weight [kg]: 0.06
• for OE number: 04L 906 054
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: 04L 906 262 A, 04L 906 262 C
• Cable Length [mm]: 540
• Number of pins: 6
• Oxygen Sensor: Regulating Probe, Thread pre-greased
• Fitting Position: before catalytic converter
• Fabrication Number: ESL-AU-019
• Manufacturer: NTY

• Oxygen Sensor: Regulating Probe, Broadband oxygen sensor, Heated
• Fitting Position: before catalytic converter
• Cable Length [mm]: 551
• Name: DE ES21246-12B1
• Manufacturer: DELPHI

• Number of pins: 3
• Connector Shape: D Shape
• Thread Size: M18 x 1,5
• Fuel Mixture Formation: Direct Injection
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 07.2015
• Engine Code: CUSA
• Housing Type: with housing
• Supplementary Article/Info 2: without integrated air temperature sensor
• Number of pins: 3
• Connector Shape: D Shape
• Length from [mm]: 125
• Length [mm]: 125
• Inlet Ø [mm]: 108
• Quality class: PJ
• Name: Air flow sensor

• General Information: rain and humidity sensor
• Manufacturer: BORSEHUNG

• Fabrication Number: EPP-VW-004
• Manufacturer: NTY

• Number of mounting bores: 3
• Number of pins: 6
• Transmission Type: Automatic Transmission
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PV008496711

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• General Information: air mass meter
• Manufacturer: VIKA

• Fitting Position: before soot particulate filter
• Overall Length [mm]: 539
• Cable Length [mm]: 350
• Fitting Depth [mm]: 44
• Connector Shape: D Shape
• Connecting thread: M14x1.5-6h
• Number of pins: 2
• Operating temperature to [°C]: 1,000
• Manufacturer: ERA

• Housing Type: with housing
• Number of pins: 4
• Plug Type: Male
• Housing Colour: black
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Name: DE AF10656-12B1
• Manufacturer: DELPHI

• Oxygen Sensor: Broadband oxygen sensor
• Number of pins: 5
• Cable Length [mm]: 540
• Quality: OE EQUIVALENT
• for OE number: 04L906262C
• Manufacturer: MEAT&DORIA

• for OE number: 04L906461B
• Manufacturer: MEAT&DORIA

• Resistor Type: Hot-wire Sensor
• Number of connectors: 4
• Weight [kg]: 0.17
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Mounting Type: Pipe-neck
• Suction pipe connector diameter [mm]: 69
• Number of pins: 4
• Supplementary Article/Supplementary Info: without gasket/seal
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Sensor Type: Hall Sensor
• Mounting Type: Screw Connection
• Shape: oval
• Number of pins: 3
• Fitting Depth [mm]: 24
• Supplementary Article/Info 2: with seal ring