• Fitting Position: Rear Axle Left, Rear Axle Right
• Supplementary Article/Supplementary Info: with attachment material
• Supplementary Article/Info 2: with integrated wheel bearing
• Rim Hole Number: 5
• Manufacturer: JP-GROUP
• Lisainfo: Wheel hub with bearing, rear
• Additional information: Wheel hub with bearing, rear

• Fitting Position: Front Axle
• for PR number: 1LG, 1ZA, 1ZB
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Outer Diameter [mm]: 136.5
• Outer Diameter 2 [mm]: 65
• Outer Diameter 1 [mm]: 85
• Width 2 [mm]: 48
• SVHC: No SVHC present!
• Lisainfo: 713 6109 80 FAG
• Additional information: 713 6109 80 FAG

• Pikkus (mm): 70
• Väliskeere [mm]: M16 x 1,5
• Kruvipea-/Mutriprofiil: sisehambumus
• Kvaliteet/klass: 10.9
• Installatsiooni pool: Tagasild mõlemapoolselt
• Manufacturer: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Siseläbimõõt [mm]: 30
• Piirangutega toode/piirangu info 2: koos rattakeskmega
• Seerianumber: KLT-VW-013
• Manufacturer: NTY
• Name: NTY KLT-VW-013

Installatsiooni pool: Tagasild, Tagasild vasakul, Tagasild paremal, Esisild

• Fitting Position: Rear Axle
• Veljeaukude hulk: 5
• Laius (mm): 68
• Siseläbimõõt [mm]: 30
• Flants-Ø (mm): 136,5
• Piirangutega toode/piirangu info 2: koos integreeritud ABS-anduriga
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Installatsiooni pool: taga
• Siseläbimõõt [mm]: 30
• Välisläbimõõt [mm]: 136,5
• Piduri-/sõidudünaamika: Sõidukitele koos ABS-ga
• Kaal (kg): 2,23
• Aukude arv: 5
• Garantii: 4 aastat garantii
• Name: CE 29SKV011
• Manufacturer: ESEN SKV

• Fitting Position: Rear Axle
• Braking/Drive Dynamics: for vehicles with ABS
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Fitting Position: Rear Axle
• Veljeaukude hulk: 5
• Siseläbimõõt [mm]: 30
• Flants-Ø (mm): 136,5
• Piirangutega toode/piirangu info 2: koos integreeritud ABS-anduriga
• Quality class: PJ
• Name: Wheel hub

• Fitting Position: Rear Axle
• Braking/Drive Dynamics: for vehicles with ABS
• Inner Diameter 1 [mm]: 32
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• for PR number: 0N1
• Fitting Position: Rear Axle Left, Rear Axle Right
• Rim Hole Number: 5
• Bolt Hole Circle Ø [mm]: 112
• Outer Diameter [mm]: 136
• Quantity per axle: 2
• Centering Diameter [mm]: 30
• Manufacturer: TOPRAN

Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with grease cap, with screw General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle
• Veljeaukude hulk: 5
• Flants-Ø (mm): 136
• Piirangutega toode/piirangu info 2: koos integreeritud ABS-anduriga
• Välisläbimõõt 1 [mm]: 80
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Välisläbimõõt [mm]: 85
• Installatsiooni pool: Esisild, esisild vasakul, esisild paremal
• Seerianumber: KLP-VW-023
• Manufacturer: NTY
• Name: NTY KLP-VW-023

Piirangutega toode/piirangu info 2: koos rattakeskmega, koos integreeritud magnetilise anduriga

• Fitting Position: Rear Axle Left, Rear Axle Right
• Rim Hole Number: 5
• Thread Size: M14X1,5
• Number of Teeth, ABS ring: 86
• Outer Diameter [mm]: 136.5
• Supplementary Article/Info 2: with integrated ABS sensor
• Inner Diameter 2 [mm]: 30
• Manufacturer: GSP

• Width [mm]: 136
• Thickness [mm]: 68
• Inner Diameter [mm]: 30
• Outer Diameter [mm]: 136
• Bolt Hole Circle Ø [mm]: 112
• Number of Holes: 5
• Bearing Type: Angular Ball Bearing
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 1.91
• Supplementary Article/Supplementary Info: with attachment material
• Manufacturer: FEBI BILSTEIN

Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring, with wheel hub General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: ees
• Siseläbimõõt [mm]: 36
• Välisläbimõõt [mm]: 136,5
• Piduri-/sõidudünaamika: Sõidukitele koos ABS-ga
• Kaal (kg): 3,39
• Aukude arv: 5
• Ava Ø 1 (mm): 112
• Garantii: 4 aastat garantii
• Manufacturer: SKV GERMANY
• Name: CE 29SKV040

• Fitting Position: Front Axle
• Outer Diameter [mm]: 136
• for OE number: 1K0498621
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• for brake disc diameter [mm]: 312
• Fitting Position: Front Axle
• Supplementary Article/Info 2: with integrated ABS sensor
• Rim Hole Number: 5
• Manufacturer: KAMOKA

• Fitting Position: Front Axle Left, Front Axle Right
• for PR number: 1ZE, 1ZF, 1ZH
• Rim Hole Number: 5
• Bolt Hole Circle Ø [mm]: 112
• Number of flange connections: 3
• Supplementary Article/Supplementary Info: with attachment material
• Quantity per axle: 2
• Manufacturer: TOPRAN

Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with bolts/screws, with integrated magnetic sensor ring General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Width [mm]: 136
• Thickness [mm]: 68
• Inner Diameter [mm]: 30
• Outer Diameter [mm]: 136
• Bolt Hole Circle Ø [mm]: 112
• Number of Holes: 5
• Bearing Type: Angular Ball Bearing
• Fitting Position: Rear Axle Left, Rear Axle Right
• Supplementary Article/Supplementary Info: with attachment material
• Name: SW 30 94 0659
• Manufacturer: SWAG

Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with wheel hub, with ABS sensor ring General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Width [mm]: 68.2
• Inner Diameter [mm]: 30
• Outer Diameter [mm]: 136.5
• Supplementary Article/Info 2: with integrated magnetic sensor ring
• Tightening Torque [Nm]: 180
• Rotation angle [°]: 180
• Manufacturer: OPTIMAL

• Fitting Position: Front Axle
• Veljeaukude hulk: 5
• Flants-Ø (mm): 136
• Piirangutega toode/piirangu info 2: koos integreeritud ABS-anduriga
• Välisläbimõõt 1 [mm]: 80
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Front Axle
• Veljeaukude hulk: 5
• Flants-Ø (mm): 136,4
• Välisläbimõõt 1 [mm]: 85
• Piirangutega toode/piirangu info 2: koos integreeritud ABS-anduriga
• Quality class: PJ
• Name: Wheel hub

• Fitting Position: Right, Left, Rear Axle
• Number of Holes: 5
• Supplementary Article/Info 2: with rubber mount
• Inner Diameter 1 [mm]: 32
• Outer Diameter 1 [mm]: 136
• Width 1 [mm]: 69
• Rotation angle [°]: 180
• Tightening Torque [Nm]: 200
• Manufacturer: SNR
• Name: SN R154.54

• Fitting Position: Rear Axle Left, Rear Axle Right
• Trim Level: >09/19
• for OE number: 5Q0598611
• Number of bores: 30
• Width [mm]: 68
• Supplementary Article/Info 2: with integrated ABS sensor
• Diameter 2 [mm]: 5
• Name: DA KWD1002
• Manufacturer: DAYCO

• Fitting Position: Rear Axle Left, Rear Axle Right
• Trim Level: REAR LR+RE
• for OE number: 8S0598611
• Number of bores: 32
• Width [mm]: 70
• Supplementary Article/Info 2: with integrated ABS sensor
• Diameter 2 [mm]: 5
• Name: DA KWD1005
• Manufacturer: DAYCO

• Vehicle Identification Number (VIN): [8P-4-162 001;]
• Fitting Position: Right, Left, Rear Axle
• Inner Diameter 1 [mm]: 30
• Number of Holes: 5
• Supplementary Article/Info 2: with rubber mount
• Number of pins: 43
• Rotation angle [°]: 180
• Tightening Torque [Nm]: 180
• Manufacturer: SNR
• Name: SN R154.55

• Fitting Position: Rear Axle
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Outer Diameter [mm]: 136.5
• Inner Diameter [mm]: 30
• Width [mm]: 67.8
• SVHC: No SVHC present!
• Manufacturer: FAG
• Name: LU 713610960

• Fitting Position: Rear Axle
• Width [mm]: 68
• Inner Diameter [mm]: 30
• Flange Ø [mm]: 136.5
• Rim Hole Number: 5
• Supplementary Article/Info 2: with integrated ABS sensor
• Manufacturer: SKF
• Lisainfo: VKBA 3656 SKF
• Additional information: VKBA 3656 SKF

• Fitting Position: Front Axle Left, Front Axle Right
• Engine Code: DDYA, DGTA, DGTE
• for brake disc diameter [mm]: 312, 340
• Block Separation:
• Installatsiooni pool: ees
• Välisläbimõõt [mm]: 136
• Piduri-/sõidudünaamika: Sõidukitele koos ABS-ga
• Kaal (kg): 3,45
• Aukude arv: 5
• Ava Ø 1 (mm): 112
• Garantii: 4 aastat garantii
• Manufacturer: SKV GERMANY
• Name: CE 29SKV264

• Fitting Position: Front Axle
• Veljeaukude hulk: 5
• Flants-Ø (mm): 136
• Välisläbimõõt 1 [mm]: 80
• Piirangutega toode/piirangu info 2: koos integreeritud ABS-anduriga
• Quality class: PJ
• Name: Wheel hub

• Fitting Position: Front Axle Left, Front Axle Right
• Trim Level: FRRE LR+FR
• for OE number: 8V0498625
• Number of bores: 29
• Width [mm]: 67
• Supplementary Article/Info 2: with integrated ABS sensor
• Diameter 2 [mm]: 5
• Name: DA KWD1008
• Manufacturer: DAYCO

• Fitting Position: Front Axle
• for brake disc diameter [mm]: 276, 288
• for PR number: 1ZE, 1ZF, 1ZH
• Width [mm]: 83
• Inner Diameter [mm]: 29
• Outer Diameter [mm]: 136.5, 80
• Supplementary Article/Info 2: with integrated magnetic sensor ring
• Number of mounting bores: 3
• Number of Teeth on input shaft: 36
• Manufacturer: OPTIMAL

• Fitting Position: Right, Left, Front Axle
• Supplementary Article/Info 2: with rubber mount
• Rim Hole Number: 5
• Mounting Type: Clamped
• Tightening Torque [Nm]: 200
• Rotation angle [°]: 180
• Manufacturer: SNR
• Name: SN R154.61

• Fitting Position: Front Axle
• Veljeaukude hulk: 5
• Piirangutega toode/piirangu info 2: koos integreeritud ABS-anduriga
• Välisläbimõõt 1 [mm]: 80
• Välisläbimõõt 2 [mm]: 136
• Manufacturer: KAVO

• Fitting Position: Front Axle
• for brake disc diameter [mm]: 312, 340
• for PR number: 1LG, 1ZA, 1ZB
• Inner Diameter [mm]: 30
• Outer Diameter [mm]: 137, 85
• Supplementary Article/Info 2: with integrated magnetic sensor ring
• Number of mounting bores: 3
• Number of Teeth on input shaft: 36
• Manufacturer: OPTIMAL

• Fitting Position: Front Axle
• Required quantity: 2
• Flange Ø [mm]: 136
• Rim Hole Number: 5
• Supplementary Article/Info 2: with integrated ABS sensor
• Outer Diameter 1 [mm]: 80
• Manufacturer: SKF
• Name: SK VKBA6556
• Lisainfo: VKBA 6556 SKF
• Additional information: VKBA 6556 SKF

• Fitting Position: Front Axle
• Required quantity: 2
• Flange Ø [mm]: 136.4
• Rim Hole Number: 5
• Supplementary Article/Info 2: with integrated ABS sensor
• Outer Diameter 1 [mm]: 85
• Manufacturer: SKF
• Name: SK VKBA7011
• Lisainfo: VKBA 7011 SKF
• Additional information: VKBA 7011 SKF

• Fitting Position: Front Axle
• for PR number: 1ZE, 1ZF, 1ZH
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Outer Diameter [mm]: 136.4
• Outer Diameter 2 [mm]: 65
• Outer Diameter 1 [mm]: 80
• Width 2 [mm]: 48.1
• Number of mounting bores: 3
• SVHC: No SVHC present!
• Manufacturer: FAG

• Fitting Position: Front Axle
• for PR number: 1ZE, 1ZF, 1ZH, 1ZJ
• Width [mm]: 48
• Thickness [mm]: 84
• Inner Diameter [mm]: 29
• Outer Diameter [mm]: 80
• Bolt Hole Circle Ø [mm]: 112
• Number of Holes: 5
• Bearing Type: Angular Ball Bearing
• Outer Diameter 1 [mm]: 65
• Outer Diameter 2 [mm]: 137
• Weight [kg]: 3.17
• Manufacturer: FEBI

Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with fastening material, with ABS sensor ring, with wheel hub General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: DDYA, DGTE, DGTA
• Fitting Position: Front Axle Left, Front Axle Right
• for brake disc diameter [mm]: 312, 340
• Block Separation:
• Width [mm]: 48
• Thickness [mm]: 84
• Inner Diameter [mm]: 29
• Outer Diameter [mm]: 85
• Bolt Hole Circle Ø [mm]: 112
• Number of Holes: 5
• Bearing Type: Angular Ball Bearing
• Outer Diameter 1 [mm]: 65
• Outer Diameter 2 [mm]: 137
• Weight [kg]: 3.08
• Manufacturer: FEBI BILSTEIN

Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with wheel hub, with ABS sensor ring, with fastening material General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• for PR number: 1LG, 1ZA, 1ZB
• jälgida mõõtu:
• Välisläbimõõt 1 [mm]: 85
• Välisläbimõõt 2 [mm]: 136
• Manufacturer: METZGER

Piirangutega toode/piirangu info 2: koos rattakeskmega, koos integreeritud magnetilise anduriga