Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Fitting Position: frontal sided
- General Information: seal ring
- Manufacturer: VIKA
- Engine Code: DDYA
- Fitting Position: frontal sided
- for OE number: 03L103085C
- Height [mm]: 10
-
Material: PTFE
(polytetrafluoroethylene) - Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Rotation Direction: Clockwise rotation
- Manufacturer: FAI
- Name: FAI OS1663
- Additional information: OS1663 FAI
- Lisainfo: OS1663 FAI
- Fitting Position: Axle beam
- General Information: camshaft seal ring
- Manufacturer: BORSEHUNG
- Fitting Position: Axle beam
- General Information: camshaft seal ring
- Manufacturer: BORSEHUNG
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
- Fitting Position: Cylinder Head
-
Sealing lip material: PTFE
(polytetrafluoroethylene) -
Material: ACM
(Polyacrylate) -
Swirl Type: Right-
hand Twist - Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: frontal sided
- General Information: shaft oil seal
- Manufacturer: BORSEHUNG
- Fitting Position: frontal sided
- for OE number: 03L103085C
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Width [mm]: 10
-
Name: Volli rongastihend,
Nukkvoll - Manufacturer: DRM
Brief Information: Always compare old and new part (in particular OE No.)
- Fitting Position: frontal sided
-
Engine Code: DDYA,
DGTA, DGTE - Block Separation:
-
Material: FPM
(fluoride rubber) - Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
- Radial Shaft Seal Design: A
-
Swirl Type: Right-
hand Twist -
Name: VOLLI RONGASTIHEND,
NUKKVOLL - Manufacturer: REI
-
Fitting Position: frontal sided,
Cylinder Head - Weight [kg]: 0.011
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: frontal sided
-
Material: PTFE
(polytetrafluoroethylene) - Supplementary Article/Info 2: with flange
- Observe service information:
-
Fabrication Number: NUP-
VW- 026
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Engine Code: DDYA,
DGTE, DGTA - Fitting Position: frontal sided
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
-
Swirl Type: Right-
hand Twist -
Name: VOLLI RONGASTIHEND,
NUKKVOLL - Manufacturer: AJU
- Engine Code: DDYA
- Fitting Position: frontal sided
- Inner Diameter 1 [mm]: 35
- Outer Diameter 1 [mm]: 136.3
- Outer Diameter 2 [mm]: 217.5
- Height 1 [mm]: 14.7
- Height 2 [mm]: 46.7
- Supplementary Article/Info 2: with flange
- for OE number: 04L103151
-
Name: SIMER. WAU VW GOLF 2.0TDI 07-
- Manufacturer: COT
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber)
- Fitting Position: frontal sided
- Housing Type: with housing
- Housing material: Plastic
-
Sealing lip material: PTFE
(polytetrafluoroethylene) - Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: frontal sided
-
General Information: shaft seal,
crankshaft - Manufacturer: BORSEHUNG
- Fitting Position: transmission sided
- General Information: sealing flang; rear
- Manufacturer: VIKA
- Fitting Position: transmission sided
-
Supplementary Article/Info 2: with mounting sleeve,
without RPM sensor - Housing Type: with housing
- Housing material: Plastic
- Supplementary Article/Supplementary Info: with pulse generator wheel
-
Sealing lip material: PTFE
(polytetrafluoroethylene) - Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: frontal sided
- Inner Diameter [mm]: 35
- Outer Diameter [mm]: 136
-
Swirl Type: Right-
hand Twist - Radial Shaft Seal Design: SP
-
Name: Volli rongastihend,
Vntvoll - Manufacturer: DRM
- Engine Code: DDYA
- Inner Diameter [mm]: 35
- Outer Diameter [mm]: 136
-
Material: PTFE
(polytetrafluoroethylene) - Fitting Position: frontal sided
- Weight [kg]: 0.4
- Supplementary Article/Info 2: with flange
- Observe service information:
-
Name: VOLLI RONGASTIHEND,
VNTVOLL - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: frontal sided
- Inner Diameter [mm]: 35
- Radial Shaft Seal Design: SP
-
Swirl Type: Right-
hand Twist -
Material: PTFE
(polytetrafluoroethylene) - Housing Type: with housing
- Dust Cover: with dust lip
- Observe mounting information:
- Manufacturer: ELRING
Installation Information: Mounting dry and without any additional oil and grease
-
Engine Code: DDYA,
DGTE, DGTA - Fitting Position: frontal sided
- Inner Diameter [mm]: 35
- Outer Diameter [mm]: 215
- Height [mm]: 52
-
Swirl Type: Right-
hand Twist -
Material: PTFE
(polytetrafluoroethylene) -
Name: VOLLI RONGASTIHEND,
VNTVOLL - Manufacturer: AJU
-
Engine Code: DDYA,
DGTE - Fitting Position: transmission sided
- Inner Diameter 1 [mm]: 85
- Outer Diameter 1 [mm]: 130.9
- Outer Diameter 2 [mm]: 170
- Height 1 [mm]: 15.8
-
Swirl Type: Left-
hand Twist -
Supplementary Article/Info 2: with flange,
with mounting sleeves - Name: CO 20037305
- Manufacturer: CORTECO
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber)
- Fitting Position: transmission sided
-
Engine Code: DDYA,
DGTA, DGTE - Block Separation:
-
Material: PTFE
(polytetrafluoroethylene) - Supplementary Article/Info 2: with carrier frame
-
Name: VOLLI RONGASTIHEND,
VNTVOLL - Manufacturer: REI
-
Engine Code: DDYA,
DGTE - Fitting Position: transmission sided
- Inner Diameter [mm]: 85
- Outer Diameter [mm]: 131
-
Swirl Type: Left-
hand Twist - Supplementary Article/Info 2: with mounting sleeve
- Housing Type: Synthetic Material Housing
-
Material: PTFE
(polytetrafluoroethylene) -
Name: VOLLI RONGASTIHEND,
VNTVOLL - Manufacturer: MEY
- Fitting Position: transmission sided
- Inner Diameter [mm]: 85
- Radial Shaft Seal Design: IWD
-
Swirl Type: Left-
hand Twist -
Material: PTFE
(polytetrafluoroethylene) - Housing Type: with housing
- Observe mounting information:
- Supplementary Article/Info 2: with mounting sleeve
- Manufacturer: ELRING
Installation Information: Mounting dry and without any additional oil and grease
-
Engine Code: DDYA,
DGTE, DGTA - Fitting Position: transmission sided
- Inner Diameter [mm]: 85
- Outer Diameter [mm]: 177
- Height [mm]: 16
-
Swirl Type: Left-
hand Twist -
Material: PTFE
(polytetrafluoroethylene) -
Name: VOLLI RONGASTIHEND,
VNTVOLL - Manufacturer: AJU
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks