• Hub Profile: 20,3x22,2 - 28N
• Supplementary Article/Supplementary Info: with clutch pressure plate
• Fabrication Number: NZS-VW-003U

Clutch: Conversion from dual-mass flywheel to single-mass flywheel Supplementary Article/Info 2: with clutch disc, with clutch release bearing, without flywheel

• Engine Code: BLS, BKC, BXE
• for clutch manufacturers: LUK
• Block Separation:
• Construction Year to: 12.2009
• Outer Diameter [mm]: 241
• Number of Teeth: 23
• Multi-piece: two-piece
• Supplementary Article/Supplementary Info: with synthetic grease
• Weight [kg]: 5.537
• for OE number: 022 141 015 S
• Observe service information:
• Manufacturer: BLUEPRINT

Clutch: Replacement for self-adjusting clutch pressure plate General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: BLS, BKC, BXE
• for clutch manufacturers: Sachs
• Block Separation:
• Construction Year to: 12.2009
• Outer Diameter [mm]: 240
• Number of Teeth: 23
• Multi-piece: two-piece
• Supplementary Article/Supplementary Info: with synthetic grease
• Weight [kg]: 11.598
• for OE number: 03G 141 015 L
• Observe service information:
• Name: Sidurikomplekt
• Manufacturer: BLP

Clutch: Replacement for self-adjusting clutch pressure plate General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Type: Manual Transmission
• for flywheel manufacturer: SACHS
• Clutch Pressure Plate Outer Diameter [mm]: 240
• Friction Lining Outer Diameter 1 [mm]: 240
• Number of Teeth: 23
• Hub Profile: 21.8x24.3
• Multi-piece: two-piece
• Supplementary Article/Supplementary Info: without central slave cylinder
• Name: Sidurikomplekt
• Manufacturer: RMC

• Transmission Type: Manual Transmission
• for flywheel manufacturer: LuK
• Clutch Pressure Plate Outer Diameter [mm]: 240
• Friction Lining Outer Diameter 1 [mm]: 240
• Number of Teeth: 23
• Hub Profile: 21.9x24.2
• Multi-piece: two-piece
• Supplementary Article/Supplementary Info: without central slave cylinder
• Name: SIDURIKOMPLEKT
• Manufacturer: RMC

• Construction Year to: 01.2010
• Manufacturer Restriction: SACHS
• Diameter [mm]: 240
• Hub Profile: 21,8x24,3-23N
• Number of Teeth: 23
• only available in set:
• Supplementary Article/Info 2: without clutch release bearing
• Observe service information:
• Name: SIDURIKOMPLEKT
• Manufacturer: SAC
• Lisainfo: 3000 970 004
• Additional information: 3000 970 004

Transmission Type: 5-Speed Manual Transmission, 6-Speed Manual Transmission SVHC: No information available, please contact the manufacturer!

• Engine Code: BLS, BKC, BXE
• for clutch manufacturers: LUK
• Block Separation:
• Construction Year to: 12.2009
• Outer Diameter [mm]: 241
• Number of Teeth: 23
• Multi-piece: three-piece
• Supplementary Article/Supplementary Info: with central slave cylinder, with synthetic grease
• Weight [kg]: 6.399
• Observe service information:
• Manufacturer: BLUE PRINT

Clutch: Replacement for self-adjusting clutch pressure plate General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: BXE
• Construction Year from: 01.2010
• for clutch manufacturers: Sachs
• Outer Diameter [mm]: 240
• Number of Teeth: 23
• Multi-piece: three-piece
• Supplementary Article/Supplementary Info: with central slave cylinder, with synthetic grease
• Weight [kg]: 6.378
• for OE number: 06J 141 015 J S1
• Observe service information:
• Name: Sidurikomplekt
• Manufacturer: BLP

Clutch: Replacement for self-adjusting clutch pressure plate General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Type: Manual Transmission
• for flywheel manufacturer: LuK
• Clutch Pressure Plate Outer Diameter [mm]: 240
• Friction Lining Outer Diameter 1 [mm]: 240
• Number of Teeth: 23
• Hub Profile: 21.9x24.2
• Multi-piece: three-piece
• Supplementary Article/Supplementary Info: with central slave cylinder
• Name: SIDURIKOMPLEKT
• Manufacturer: RMC

• Construction Year to: 02.2006
• Engine Code: BKC
• Transmission Code: FWZ
• Transmission Type: 6-Speed Manual Transmission
• Number of Teeth: 23
• Hub Profile: 24,2 x 21,8 mm
• for flywheel manufacturer: NOMF
• Eject Force [N]: 7,300
• Outer Diameter [mm]: 241
• Name: Clutch kit
• Quality class: PJ

Supplementary Article/Supplementary Info: without central slave cylinder, with clutch pressure plate Supplementary Article/Info 2: with clutch disc, Special tools for mounting not necessary Lisainfo: "Tootja: SRL
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
(kvaliteediklass: PJ)"

• Construction Year from: 01.2010
• only in connection with: 3182 600 241
• Manufacturer Restriction: SACHS
• Diameter [mm]: 240
• Hub Profile: 21,8x24,3-23N
• Number of Teeth: 23
• only available in set:
• Supplementary Article/Info 2: without clutch release bearing
• Observe service information:
• Name: SIDURIKOMPLEKT
• Manufacturer: SAC

Transmission Type: 5-Speed Manual Transmission, 6-Speed Manual Transmission SVHC: No information available, please contact the manufacturer!

• Construction Year to: 02.2006, 11.2009
• Engine Code: BKC, BLS, BXE
• Transmission Code: FWZ, JLS,KNQ, FWZ,KNQ
• Transmission Type: 6-Speed Manual Transmission
• Block Separation:
• Construction Year from: 05.2006, 03.2006
• New Part:
• Clutch Pressure Plate Outer Diameter [mm]: 241
• Preload Force [N]: 7,300
• Number of Teeth: 23
• Hub Profile: 24,2 x 21,8
• Supplementary Article/Supplementary Info: without central slave cylinder
• Clutch: for vehicles with push type clutch
• for flywheel manufacturer: SACHS
• Supplementary Article/Info 2: Special tools for mounting not necessary
• Weight [kg]: 5.71
• Name: SIDURIKOMPLEKT
• Manufacturer: VAL

• Transmission Type: Manual Transmission
• for flywheel manufacturer: SACHS
• Clutch Pressure Plate Outer Diameter [mm]: 240
• Friction Lining Outer Diameter 1 [mm]: 240
• Number of Teeth: 23
• Hub Profile: 21.8x24.3
• Multi-piece: three-piece
• Supplementary Article/Supplementary Info: with central slave cylinder
• Name: Sidurikomplekt
• Manufacturer: RMC

• Construction Year to: 11.2009
• for flywheel manufacturer: Sachs
• Diameter [mm]: 240
• Adjustment: with automatic adjustment
• SVHC: No SVHC present!
• Manufacturer: LUK
• Name: LU 624323009

• Engine Code: BLS, BKC, BXE
• for clutch manufacturers: Sachs
• Block Separation:
• Construction Year to: 12.2009
• Outer Diameter [mm]: 240
• Number of Teeth: 23
• Multi-piece: three-piece
• Supplementary Article/Supplementary Info: with central slave cylinder, with synthetic grease
• Weight [kg]: 6.681
• for OE number: 03G 141 015 L S1
• Observe service information:
• Manufacturer: BLUEPRINT

Clutch: Replacement for self-adjusting clutch pressure plate General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: BKC, BLS, BXE
• Transmission Type: Manual Transmission
• Construction Year to: 05.2009
• New Part:
• Clutch Pressure Plate Outer Diameter [mm]: 240
• Preload Force [N]: 7,200
• Number of Teeth: 23
• Hub Profile: 24,2 x 21,8
• Supplementary Article/Supplementary Info: without central slave cylinder
• Clutch: for vehicles with push type clutch
• for flywheel manufacturer: LUK
• Supplementary Article/Info 2: Special tools for mounting not necessary
• Weight [kg]: 5.52
• Name: SIDURIKOMPLEKT
• Manufacturer: VAL

• Construction Year to: 11.2009
• for flywheel manufacturer: LuK
• Diameter [mm]: 240
• Adjustment: with automatic adjustment
• SVHC: No SVHC present!
• Name: SIDURIKOMPLEKT
• Manufacturer: LUK

• Construction Year to: 11.2009
• for flywheel manufacturer: LuK
• Diameter [mm]: 240
• Supplementary Article/Supplementary Info: with central slave cylinder
• Adjustment: with automatic adjustment
• SVHC: No SVHC present!
• Name: SIDURIKOMPLEKT
• Manufacturer: LUK

• Construction Year to: 02.2006, 10.2008
• Engine Code: BKC, BLS, BXE
• Transmission Code: FWZ, JLS
• Transmission Type: 6-Speed Manual Transmission
• Block Separation:
• Construction Year from: 05.2006, 03.2006
• New Part:
• Clutch Pressure Plate Outer Diameter [mm]: 240
• Preload Force [N]: 7,200
• Number of Teeth: 23
• Hub Profile: 24,2 x 21,8
• Supplementary Article/Supplementary Info: with central slave cylinder
• Number of mounting holes at central slave cylinder: 3
• Bore Ø [mm]: 31
• Material: Aluminium
• Supplementary Article/Info 2: without sensor
• for flywheel manufacturer: LUK
• Weight [kg]: 6.19
• Name: SIDURIKOMPLEKT
• Manufacturer: VAL

• Supplementary Article/Info 2: with flywheel, with screw set, with clutch disc
• Number of Teeth: 23
• Fabrication Number: NZS-VW-005
• Name: NTY NZS-VW-005
• Manufacturer: NTY

Clutch: Conversion from dual-mass flywheel to single-mass flywheel Supplementary Article/Supplementary Info: without central slave cylinder, with clutch pressure plate

• Construction Year to: 02.2006, 11.2009
• Engine Code: BKC, BLS, BXE
• Transmission Code: FWZ, JLS,KNQ, FWZ,KNQ
• Transmission Type: 6-Speed Manual Transmission
• Block Separation:
• Construction Year from: 05.2006, 03.2006
• New Part:
• Clutch Pressure Plate Outer Diameter [mm]: 241
• Preload Force [N]: 7,300
• Number of Teeth: 23
• Hub Profile: 24,2 x 21,8
• Supplementary Article/Supplementary Info: with central slave cylinder
• Number of mounting holes at central slave cylinder: 3
• for flywheel manufacturer: SACHS
• Weight [kg]: 6.45
• Name: SIDURIKOMPLEKT
• Manufacturer: VAL
• Additional information: 834085 VALEO
• Lisainfo: 834085 VALEO

• for flywheel manufacturer: Sachs
• Diameter [mm]: 240
• Adjustment: with automatic adjustment
• SVHC: No SVHC present!
• Manufacturer: LUK
• Name: LU 624397609

• Construction Year from: 01.2010
• Manufacturer Restriction: SACHS
• Diameter [mm]: 240
• Number of Teeth: 23
• Alternative Repair Kit: 3000 970 062
• only to be used within set:
• only available in set:
• Name: SIDURIKOMPLEKT
• Manufacturer: SAC

Transmission Type: 5-Speed Manual Transmission, 6-Speed Manual Transmission SVHC: No information available, please contact the manufacturer!

• Construction Year to: 01.2010
• Manufacturer Restriction: SACHS
• Diameter [mm]: 240
• Number of Teeth: 23
• Hub Profile: 21,8x24,3-23N
• Alternative Repair Kit: 3000 970 004
• only to be used within set:
• only available in set:
• Manufacturer: SACHS

Transmission Type: 5-Speed Manual Transmission, 6-Speed Manual Transmission SVHC: No information available, please contact the manufacturer!

• Construction Year from: 11.2008
• Engine Code: BXE
• Transmission Code: KNQ
• Transmission Type: 6-Speed Manual Transmission
• New Part:
• Clutch Pressure Plate Outer Diameter [mm]: 241
• Preload Force [N]: 7,200
• Number of Teeth: 23
• Hub Profile: 24,3 x 21,8
• Supplementary Article/Supplementary Info: with central slave cylinder
• Bore Ø [mm]: 29
• Material: Plastic
• Weight [kg]: 6.15
• Name: Sidurikomplekt
• Manufacturer: VAL

• Construction Year to: 11.2009
• for flywheel manufacturer: Sachs
• Diameter [mm]: 240
• Supplementary Article/Supplementary Info: with central slave cylinder
• Adjustment: with automatic adjustment
• SVHC: No SVHC present!
• Name: Sidurikomplekt
• Manufacturer: LUK

• Construction Year from: 01.2010
• for flywheel manufacturer: Sachs
• Diameter [mm]: 240
• Supplementary Article/Supplementary Info: with central slave cylinder
• Adjustment: with automatic adjustment
• SVHC: No SVHC present!
• Manufacturer: LUK
• Name: LU 624397635

• Construction Year to: 02.2006
• Engine Code: BKC
• Transmission Code: FWZ
• Transmission Type: 6-Speed Manual Transmission
• Number of Teeth: 23
• Hub Profile: 24,2 x 21,8 mm
• Supplementary Article/Info 2: with flywheel, with clutch disc, with screw set
• Outer Diameter [mm]: 240
• Name: Clutch kit
• Quality class: PJ

Supplementary Article/Supplementary Info: without central slave cylinder, with clutch pressure plate Clutch: Conversion from dual-mass flywheel to single-mass flywheel Lisainfo: "Tootja: SRL
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
(kvaliteediklass: PJ)"

• Transmission Type: Manual Transmission
• Transmission Code: MQ 350
• Construction Year to: 01.2010
• New Part:
• Number of mounting bores: 6
• Clutch Pressure Plate Outer Diameter [mm]: 241
• Preload Force [N]: 7,200
• Number of Teeth: 23
• Weight [kg]: 18.37
• Name: SIDURIKOMPLEKT
• Manufacturer: VAL

Supplementary Article/Supplementary Info: with dual-mass flywheel, with central slave cylinder Supplementary Article/Info 2: with screw set, Special tools for mounting not necessary

• Construction Year to: 02.2006
• Engine Code: BKC
• Transmission Code: FWZ, MQ-350
• Transmission Type: 6-Speed Manual Transmission
• New Part:
• Supplementary Article/Info 2: with screw set, with lock screw set
• Clutch Pressure Plate Outer Diameter [mm]: 240
• Preload Force [N]: 7,200
• Number of Teeth: 23
• Hub Profile: 24,3 x 21,8
• Weight [kg]: 19.67
• Name: Sidurikomplekt
• Manufacturer: VAL

Supplementary Article/Supplementary Info: with single-mass flywheel, with central slave cylinder Clutch: Conversion from dual-mass flywheel to single-mass flywheel

• Construction Year to: 11.2009
• Supplementary Article/Supplementary Info: with central slave cylinder
• Supplementary Article/Info 2: with flywheel, with screw set
• Adjustment: with automatic adjustment
• Number of mounting bores: 6
• SVHC: No SVHC present!
• Name: SIDURIKOMPLEKT
• Manufacturer: LUK

• Construction Year to: 01.2010
• Diameter [mm]: 240
• Number of Teeth: 23
• Mounting Type: not pre-mounted
• only available in set:
• Supplementary Article/Info 2: with clutch disc
• Name: SIDURIKOMPLEKT
• Manufacturer: SAC

Transmission Type: 5-Speed Manual Transmission, 6-Speed Manual Transmission Supplementary Article/Supplementary Info: with central slave cylinder, with clutch pressure plate, with dual-mass flywheel, with flywheel screws, with pressure plate screws SVHC: No information available, please contact the manufacturer!

• Construction Year to: 01.2010
• Diameter [mm]: 240
• Number of Teeth: 23
• Mounting Type: not pre-mounted
• Supplementary Article/Info 2: without clutch release bearing, with clutch disc
• Name: SIDURIKOMPLEKT
• Manufacturer: SAC

Transmission Type: 5-Speed Manual Transmission, 6-Speed Manual Transmission Supplementary Article/Supplementary Info: with clutch pressure plate, with dual-mass flywheel, with flywheel screws, with pressure plate screws SVHC: No information available, please contact the manufacturer!

• Construction Year to: 09.2009
• Engine Code: BKC
• Transmission Code: FWZ
• Transmission Type: 6-Speed Manual Transmission
• New Part:
• Supplementary Article/Supplementary Info: with single-mass flywheel
• Clutch Pressure Plate Outer Diameter [mm]: 240
• Preload Force [N]: 7,200
• Number of Teeth: 23
• Hub Profile: 24,3 x 21,8
• Weight [kg]: 19.05
• Manufacturer: VALEO

Clutch: Conversion from dual-mass flywheel to single-mass flywheel, for vehicles with push type clutch