• Fitting Position: Rear Axle, transmission sided
• Internal Toothing differential side, conn. to conn. shaft: 33
• Joint Type: CV Joint
• Drive Shaft: without ABS ring
• Manufacturer: JP GROUP
• Lisainfo: CV joint kit, front, inner, left, man.transm.
• Additional information: CV joint kit, front, inner, left, man.transm.

• Construction Year from: 06.2007
• Fitting Position: Rear Axle, Wheel Side
• Internal Toothing wheel side: 30
• External Toothing wheel side: 36
• Joint Type: CV Joint
• Manufacturer: JP GROUP
• Lisainfo: CV joint kit, front, outer
• Additional information: CV joint kit, front, outer

• Fitting Position: Wheel Side, Front Axle Left, Front Axle Right
• Internal Toothing wheel side: 27
• External Toothing wheel side: 36
• Joint Type: CV Joint
• Manufacturer: JP GROUP
• Lisainfo: CV joint kit, front, outer
• Additional information: CV joint kit, front, outer

• Vehicle Identification Number (VIN) from: 1Z-4-000 001
• Fitting Position: Front Axle, transmission sided
• Internal Toothing differential side, conn. to conn. shaft: 34
• Drive Shaft: without ABS ring
• Transmission Type: 6-Speed Automatic Transmission
• Lisainfo: Joint Kit, drive shaft
• Additional information: Joint Kit, drive shaft

• Fitting Position: transmission sided
• Joint Type: Disc Joint
• Internal Toothing differential side, conn. to transmission: 33
• Length [mm]: 34
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Fitting Position: Wheel Side
• Length [mm]: 95
• External Toothing wheel side: 36
• Internal Toothing wheel side: 30
• Seal Diameter [mm]: 59.5
• Diameter 1 [mm]: 59.6
• Outer Diameter [mm]: 90
• Joint Type: CV Joint
• Fabrication Number: NPZ-SK-007
• Manufacturer: NTY
• Name: NTY NPZ-SK-007

• Fitting Position: Front Axle Left, Front Axle Right, Wheel Side
• External Toothing wheel side: 36
• Internal Toothing wheel side: 30
• Seal Diameter [mm]: 53
• Diameter 1 [mm]: 90
• Manufacturer: BGA

• Vehicle Identification Number (VIN) to: 1Z7A153447
• Fitting Position: Wheel Side
• Joint Type: CV Joint
• External Toothing wheel side: 36
• Internal Toothing wheel side: 30
• Diameter 1 [mm]: 22
• Seal Diameter [mm]: 59
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Length [mm]: 34
• Manufacturer: BGA

Fitting Position: Front Axle Left, Front Axle Right, transmission sided

• Fitting Position: Rear Axle, Wheel Side, Front Axle Left
• Joint Type: CV Joint
• External Toothing wheel side: 36
• Internal Toothing wheel side: 30
• Seal Diameter [mm]: 59.6
• Outer Diameter [mm]: 89.9
• Name: LIIGENDLAAGER, VEOVOLL
• Manufacturer: MAX

Vehicle Identification Number (VIN) to: 1Z...7A...153447, 1Z...8B...150591, 1Z...82024977, 1Z...88008976

• Construction Year to: 05.2007
• Fitting Position: Rear Axle Left, Rear Axle Right, Wheel Side
• Vehicle Identification Number (VIN) to: 1Z7A153447
• External Toothing wheel side: 36
• Internal Toothing wheel side: 30
• Seal Diameter [mm]: 59.5
• Length [mm]: 95
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fabrication Number: NPW-VW-005
• Manufacturer: NTY

Fitting Position: Front Axle Left, Front Axle Right, transmission sided, Rear Axle Left, Rear Axle Right Transmission Type: 6-Speed Manual Transmission, 5-Speed Manual Transmission, Manual Transmission, 4-Speed Automatic Transmission, Automatic Transmission, 7-Speed Dual-Clutch Transmission, Dual-Clutch Transmission

• Fitting Position: Wheel Side
• Joint Type: CV Joint
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Diameter 1 [mm]: 28
• Seal Diameter [mm]: 59
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Fabrication Number: NPW-VW-002
• Manufacturer: NTY

Fitting Position: Front Axle Left, Front Axle Right, transmission sided, Rear Axle Left, Rear Axle Right Transmission Type: 6-Speed Manual Transmission, 5-Speed Manual Transmission, Manual Transmission, Automatic Transmission, 6-Speed Automatic Transmission, 7-Speed Dual-Clutch Transmission, Dual-Clutch Transmission

• Fitting Position: Wheel Side
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 59.5
• Fabrication Number: NPZ-SK-009
• Manufacturer: NTY
• Name: NTY NPZ-SK-009

• Fitting Position: Front Axle Left, Front Axle Right, Wheel Side
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 53
• Length [mm]: 105
• Diameter 1 [mm]: 98
• Thread Size: M16x1.5
• Outer Diameter 1 [mm]: 59.5
• Outer Diameter 2 [mm]: 98
• Manufacturer: BGA

• Fitting Position: Rear Axle, Wheel Side
• Construction Year to: 05.2007
• External Toothing wheel side: 36
• Internal Toothing wheel side: 30
• Seal Diameter [mm]: 59.5
• Joint Type: CV Joint
• Drive Shaft: without ABS ring
• Outer Diameter [mm]: 90
• Length [mm]: 96
• Name: LIIGENDLAAGER, VEOVOLL
• Manufacturer: MAX
• Lisainfo: 25-1467MG
• Additional information: 25-1467MG

• Fitting Position: transmission sided, Front Axle
• Internal Toothing wheel side: 33
• Outer Diameter [mm]: 100
• Bellows Material: Thermoplast
• Fabrication Number: NPW-VW-074
• Manufacturer: NTY
• Name: NTY NPW-VW-074

• Construction Year to: 06.2007
• Transmission Type: 5-Speed Manual Transmission
• Joint Type: CV Joint
• Supplementary Article/Supplementary Info: with attachment material
• Lubrication: with grease lubrication
• Supplementary Article/Info 2: with bellow
• Wheel-side joint diameter [mm]: 90
• Manufacturer: DELLO AUTOMEGA

Fitting Position: Front Axle Left, Front Axle Right, Wheel Side, Rear Axle Left, Rear Axle Right

• Fitting Position: Rear Axle Left, Rear Axle Right
• External Toothing differential side: 33
• Fabrication Number: NPW-VW-088
• Width [mm]: 34
• Diameter [mm]: 86
• Manufacturer: NTY
• Name: NTY NPW-VW-088

Lisainfo: VW 4MOTION TIGUAN 07-18, GOLF V,VI, PASSAT 05-15, CC 08-16, SKODA OCTAVIA II 4WD 04-13, SUPERB II 4WD 08-15, AUDI QUATTRO A1, A3 03-15, Q3, TT 06-15, SEAT 4WD ALTEA, ALTEA XL /TYLNY,LEWY,PRAWY/ Additional information: VW 4MOTION TIGUAN 07-18, GOLF V,VI, PASSAT 05-15, CC 08-16, SKODA OCTAVIA II 4WD 04-13, SUPERB II 4WD 08-15, AUDI QUATTRO A1, A3 03-15, Q3, TT 06-15, SEAT 4WD ALTEA, ALTEA XL /TYLNY,LEWY,PRAWY/

• Fitting Position: Front Axle, Wheel Side
• Transmission Type: 6-Speed Manual Transmission
• Joint Type: CV Joint
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 59.5
• Outer Diameter [mm]: 98
• Name: LIIGENDLAAGER, VEOVOLL
• Manufacturer: MAX

• Fitting Position: Front Axle, transmission sided
• Length [mm]: 34
• Internal Toothing differential side, conn. to conn. shaft: 33
• Outer Diameter [mm]: 99.9
• Joint Type: Disc Joint
• Name: LIIGENDLAAGER, VEOVOLL
• Manufacturer: MAX

• Fitting Position: Front Axle
• Transmission Type: Manual Transmission
• Number of Teeth: 33
• Diameter [mm]: 100
• Internal Toothing wheel side: 33
• Manufacturer: VIKA

General Information: c.v.joint; inner; 33teeth; MT; 100MM; Inner tooth33mm

• Fitting Position: Rear Axle Left, Rear Axle Right, Wheel Side
• Transmission Type: 6-Speed Manual Transmission
• Vehicle Identification Number (VIN) to: 1Z7A153447
• Construction Year to: 06.2007
• Parameter: DP2110.10.1118
• Length [mm]: 95.5
• Thread Size: M16X1,5
• External Toothing wheel side: 36
• Internal Toothing wheel side: 30
• Seal Diameter [mm]: 59.5
• Manufacturer: DRIVE

• Fitting Position: transmission sided, Rear Axle
• Internal Toothing differential side, conn. to conn. shaft: 33
• Number of bores: 6
• Outer Diameter [mm]: 100
• Joint Type: Disc Joint
• Length from [mm]: 34
• Name: Inner CV-joint
• Quality class: PJ

Lisainfo: "Tootja: SRL
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
(kvaliteediklass: PJ)"

• Fabrication Number: NPW-VW-013
• Manufacturer: NTY

Fitting Position: Front Axle Left, Front Axle Right, transmission sided, Rear Axle Left, Rear Axle Right Transmission Type: 7-Speed Dual-Clutch Transmission, 6-Speed Manual Transmission, Manual Transmission, Dual-Clutch Transmission, Automatic Transmission, 5-Speed Manual Transmission, 6-Speed Dual-Clutch Transmission

• Fitting Position: Rear Axle, Wheel Side
• External Toothing wheel side: 36
• Internal Toothing wheel side: 33
• Seal Diameter [mm]: 59
• Outer Diameter [mm]: 82
• Joint Type: CV Joint
• Fabrication Number: NPZ-VW-043
• Manufacturer: NTY

• Transmission Type: 6-Speed Manual Transmission
• for OE number: 377498103E
• Length [mm]: 34
• Internal Toothing differential side, conn. to transmission: 33
• Supplementary Article/Info 2: with bolts/screws, with lock tab
• Technical Information Number: Original design
• Manufacturer: GSP

Fitting Position: Rear Axle Left, transmission sided, Rear Axle Right

• Fitting Position: Rear Axle, Wheel Side
• Joint Type: CV Joint
• External Toothing wheel side: 36
• Internal Toothing wheel side: 30
• Seal Diameter [mm]: 59.6
• Outer Diameter [mm]: 89.9
• Bellows Material: Thermoplast
• SVHC: No SVHC present!
• Name: Liigendlaager, veovoll
• Manufacturer: FAG

Vehicle Identification Number (VIN) to: 1Z...7A...153447, 1Z...8B...150591, 1Z...82024977, 1Z...88008976

• Fitting Position: transmission sided
• Joint Type: Universal Joint
• Internal Toothing wheel side: 34
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Fitting Position: Wheel Side, Front Axle Left, Front Axle Right
• Parameter: DP2110.10.1538
• Length [mm]: 106
• Thread Size: M16X1,5
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 59.5
• Manufacturer: DRIVE

• Transmission Type: 6-Speed Automatic Transmission
• Fitting Position: Front Axle Left, Front Axle Right, Wheel Side
• Lubrication: with grease lubrication
• Joint Diameter [mm]: 97.95
• Joint Type: CV Joint
• Supplementary Article/Info 2: with bellow
• Supplementary Article/Supplementary Info: with attachment material
• Quantity per axle: 2
• Full Set:
• New Part:
• Used part return not required:
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Rear Axle Left, Rear Axle Right
• Fabrication Number: NPZ-VW-047
• Length [mm]: 80
• External Toothing differential side: 36
• Internal Toothing differential side, conn. to conn. shaft: 33
• Seal Diameter [mm]: 59.5

• Transmission Type: Manual Transmission
• Lubrication: with grease lubrication
• Joint Diameter [mm]: 100
• Joint Type: CV Joint, Disc Joint
• Supplementary Article/Info 2: with bellow
• Supplementary Article/Supplementary Info: with attachment material
• Full Set:
• New Part:
• Used part return not required:
• Manufacturer: TOPRAN

Fitting Position: Front Axle Left, Front Axle Right, transmission sided General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle, Wheel Side
• Transmission Type: 6-Speed Manual Transmission
• Joint Type: CV Joint
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 59.5
• Outer Diameter [mm]: 98
• Bellows Material: Thermoplast
• SVHC: No SVHC present!
• Name: Liigendlaager, veovoll
• Manufacturer: FAG

• Fitting Position: Wheel Side, Rear Axle
• Vehicle Identification Number (VIN) to: 1Z7A153447
• Thread Size: M16x1.5
• External Toothing wheel side: 36
• Internal Toothing wheel side: 30
• Seal Diameter [mm]: 60
• Outer Diameter [mm]: 90
• Joint Type: CV Joint
• Name: Outer CV-joint
• Quality class: PJ

Lisainfo: "Tootja: SRL
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle, transmission sided
• Joint Type: CV Joint
• Drive Shaft: without ABS ring
• Length [mm]: 34
• Internal Toothing differential side, conn. to conn. shaft: 33
• Outer Diameter [mm]: 100
• Name: LIIGENDLAAGER, VEOVOLL
• Manufacturer: MEY

• Fitting Position: Front Axle Right, Front Axle Left
• Number of Teeth: 28
• Diameter [mm]: 108
• Internal Toothing wheel side: 28
• General Information: c.v.joint; inner; 28teeth; 108MM; Inner tooth28mm
• Manufacturer: VIKA

• for OE number: 1K0407331
• Length [mm]: 32
• Internal Toothing differential side, conn. to transmission: 28
• Technical Information Number: Non-Original design
• Manufacturer: GSP

Fitting Position: Front Axle Left, Front Axle Right, transmission sided

• Construction Year from: 06.2007
• Fitting Position: Rear Axle, Wheel Side
• Length [mm]: 96.5
• Outer Diameter [mm]: 90
• External Thread Size: M16 x 1,5
• External Toothing wheel side: 36
• Internal Toothing differential side, conn. to transmission: 30
• Outer Diameter 1 [mm]: 59.5
• Weight [kg]: 1.8
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Internal Toothing wheel side: 33
• Outer Diameter [mm]: 100
• Bellows Material: Thermoplast
• Manufacturer: METELLI

Transmission Type: not for 6-speed dual-clutch transmission, Manual Transmission

• Transmission Type: Manual Transmission
• Thread Size: M20x1,5
• Bellows Material: Thermoplast
• Drive Shaft: without ABS ring
• Weight [kg]: 1.897
• Manufacturer: VAICO

Fitting Position: Front Axle Left, Front Axle Right, Wheel Side, Front Axle General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 06.2007
• Fitting Position: Rear Axle Left, Rear Axle Right, Wheel Side
• Vehicle Identification Number (VIN) to: 1Z7A153447, 1Z8B150591, 1Z82024977, 1Z88008976
• Block Separation:
• Construction Year from: 07.2007
• Vehicle Identification Number (VIN) from: 1Z7A153448, 1Z8B150592, 1Z82024978, 1Z88008977
• External Toothing wheel side: 36
• Internal Toothing wheel side: 30
• Seal Diameter [mm]: 59.5
• Joint Type: CV Joint
• Length [mm]: 93
• Thread Size: M16x1,5
• Surface: Powder coated
• Name: Liigendlaager, veovoll
• Manufacturer: MEY

• Construction Year from: 07.2007
• Vehicle Identification Number (VIN) from: 1Z7A153448, 1Z8B150592, 1Z82024978, 1Z88008977
• Fitting Position: Wheel Side
• External Toothing wheel side: 36
• Internal Toothing wheel side: 33
• Seal Diameter [mm]: 59.5
• Joint Type: CV Joint
• Length [mm]: 79
• Outer Diameter [mm]: 82.4
• Joint Diameter [mm]: 82.4
• Surface: Powder coated
• Name: Liigendlaager, veovoll
• Manufacturer: MEY

• Transmission Type: 6-Speed Manual Transmission
• Fitting Position: Rear Axle, Wheel Side
• Length [mm]: 79
• External Toothing differential side: 36
• Internal Toothing differential side, conn. to transmission: 33
• Seal Diameter [mm]: 59.5
• Manufacturer: GSP

• Fitting Position: Front Axle
• Internal Toothing wheel side: 27
• External Toothing wheel side: 36
• General Information: c.v.joint; outer; Inner tooth27mm; outer tooth36mm
• Manufacturer: VIKA

• Fitting Position: Front Axle
• Thread Size: M16x1.5
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 59.5
• Outer Diameter [mm]: 97.9
• Bellows Material: Rubber
• Name: LIIGENDLAAGER, VEOVOLL
• Manufacturer: MEP
• Additional information: 15-1463MET
• Lisainfo: 15-1463MET

• Fitting Position: Front Axle, transmission sided
• Internal Toothing differential side, conn. to conn. shaft: 28
• Outer Diameter [mm]: 108
• Joint Type: Disc Joint
• Length [mm]: 64
• Name: LIIGENDLAAGER, VEOVOLL
• Manufacturer: MAX

• Fitting Position: Rear Axle, Wheel Side
• Construction Year to: 05.2007
• External Toothing wheel side: 36
• Internal Toothing wheel side: 30
• Seal Diameter [mm]: 59.5
• Joint Type: CV Joint
• Drive Shaft: without ABS ring
• Length [mm]: 95.5
• Outer Diameter [mm]: 90
• Surface: Powder coated
• Name: LIIGENDLAAGER, VEOVOLL
• Manufacturer: MEY

• Fitting Position: Wheel Side, Front Axle
• Engine Code: BKC, BLS, BXE
• Transmission Type: 6-Speed Manual Transmission
• Thread Size: M16x1.5
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 60
• Outer Diameter [mm]: 98
• Joint Type: CV Joint
• Name: Outer CV-joint
• Quality class: PJ

Lisainfo: "Tootja: SRL
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
(kvaliteediklass: PJ)"

• Vehicle Identification Number (VIN) from: 1Z-4-000001
• Transmission Type: 6-Speed Automatic Transmission
• Fitting Position: transmission sided
• Joint Type: Tripod Joint
• Drive Shaft: without ABS ring
• Length [mm]: 88
• Internal Toothing differential side, conn. to conn. shaft: 34
• Name: LIIGENDLAAGER, VEOVOLL
• Manufacturer: MAX

• Fitting Position: Rear Axle
• Construction Year to: 06.2007
• Vehicle Identification Number (VIN) to: 1Z88008976
• Thread Size: M16x1.5
• External Toothing wheel side: 36
• Internal Toothing wheel side: 30
• Seal Diameter [mm]: 59.5
• Outer Diameter [mm]: 90
• Bellows Material: Rubber
• Name: LIIGENDLAAGER, VEOVOLL
• Manufacturer: MEP
• Lisainfo: 15-1467 MET
• Additional information: 15-1467 MET

• Transmission Type: 6-Speed Manual Transmission
• Fitting Position: Wheel Side, Front Axle
• Internal Toothing wheel side: 27
• Outer Diameter [mm]: 98
• External Toothing wheel side: 36
• Seal Diameter [mm]: 59.5
• Manufacturer: LPR

• Fitting Position: Wheel Side
• Internal Toothing wheel side: 30
• External Toothing wheel side: 36
• General Information: c.v.joint; outer; Inner tooth30mm; outer tooth36mm
• Manufacturer: VIKA

• Fitting Position: Wheel Side, Front Axle Left, Front Axle Right
• Length [mm]: 106
• Thread Size: M16X1,5
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 59.5
• Technical Information Number: Original design, Groove Type Inner
• Manufacturer: GSP

• Fitting Position: transmission sided, Front Axle
• Length [mm]: 34
• Outer Diameter [mm]: 100
• Internal Toothing wheel side: 33
• Weight [kg]: 1.7
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle, transmission sided
• Transmission Type: 6-Speed Automatic Transmission
• Internal Toothing differential side, conn. to transmission: 34
• Outer Diameter [mm]: 80
• SVHC: No SVHC present!
• Name: Liigendlaager, veovoll
• Manufacturer: FAG

• Fitting Position: Front Axle, transmission sided
• Transmission Type: 6-Speed Manual Transmission
• Internal Toothing differential side, conn. to conn. shaft: 28
• Outer Diameter [mm]: 108
• Bellows Material: Thermoplast
• Length [mm]: 32
• SVHC: No SVHC present!
• Manufacturer: FAG
• Name: LU 771072030

• Construction Year to: 06.2007
• Vehicle Identification Number (VIN) to: 1Z88008976
• Fitting Position: Rear Axle, Wheel Side
• Outer Diameter [mm]: 90
• External Toothing wheel side: 36
• Internal Toothing wheel side: 30
• Seal Diameter [mm]: 59.5
• Manufacturer: LPR
• Additional information: KAD534 LPR
• Lisainfo: KAD534 LPR

• Fitting Position: Rear Axle Left, Rear Axle Right, Wheel Side
• Construction Year to: 05.2007
• Vehicle Identification Number (VIN) to: 1Z-7A-153 447
• Thread Size: M16x1,5
• Outer Diameter [mm]: 90
• Internal Toothing wheel side: 30
• Length [mm]: 95.5
• Seal Diameter [mm]: 59.5
• External Toothing wheel side: 36
• Weight [kg]: 2.262
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Right, Left, Front Axle
• Joint Type: Disc Joint
• Inner Diameter 2 [mm]: 100
• External Toothing differential side: 33
• Length 2 [mm]: 34
• Name: SN IJK54.003
• Manufacturer: SNR

Vehicle Identification Number (VIN): [6K-X-081153;], [6K-X-524 122;], [8C-R-000001;], [;8L-X-001445], [8L-X-001446;]

• Thread Size: M16x1,5
• Seal Diameter [mm]: 59.5
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Version: 6 balls
• Length 2 [mm]: 106
• Fitting Position: outer
• Manufacturer: SNR /NTN-SNR/

• New Part:
• Fitting Position: Front Axle Left, Front Axle Right, Wheel Side
• Supplementary Article/Supplementary Info: with attachment material
• Joint Type: CV Joint
• Thread Size: M16x1,5
• Bellows Material: Thermoplast
• Supplementary Article/Info 2: with bellow
• Lubrication: with grease lubrication
• Length [mm]: 106
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 59.5
• Weight [kg]: 2.483
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Vehicle Identification Number (VIN): [1M-3-109 001;]
• Fitting Position: Right, Left
• Joint Type: Disc Joint
• External Toothing differential side: 28
• Inner Diameter 2 [mm]: 108
• Length 2 [mm]: 32
• Manufacturer: SNR /NTN-SNR/
• Name: SN IJK54.006

• Fitting Position: Wheel Side, Front Axle
• Weight [kg]: 2.509
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 59
• Outer Diameter [mm]: 97
• Joint Type: CV Joint
• Packaging length [cm]: 20
• Packaging width [cm]: 10.5
• Packaging height [cm]: 10.5
• Manufacturer: FEBEST

• Fitting Position: transmission sided, Front Axle
• Weight [kg]: 1.932
• Internal Toothing differential side, conn. to transmission: 33
• Seal Diameter [mm]: 100
• Outer Diameter [mm]: 99
• Joint Type: Disc Joint
• Packaging length [cm]: 20
• Packaging width [cm]: 10.5
• Packaging height [cm]: 10.5
• Manufacturer: FEBEST

• Fitting Position: Rear Axle, transmission sided
• Length [mm]: 34
• Internal Toothing differential side, conn. to conn. shaft: 33
• Outer Diameter [mm]: 99.9
• Number of Holes: 6
• Joint Type: Disc Joint
• Name: LIIGENDLAAGER, VEOVOLL
• Manufacturer: SKF

• Thread Size: M16x1,5
• Fitting Position: outer
• Seal Diameter [mm]: 59.5
• External Toothing wheel side: 36
• Length 2 [mm]: 95.5
• Internal Toothing wheel side: 30
• Version: 6 balls
• Name: SN OJK54.003
• Manufacturer: SNR

Vehicle Identification Number (VIN): [;1Z-7A153 447], [;1Z-82024 977], [;1Z-88008 976], [;1Z-8B150 591]

• Construction Year from: 07.2007
• Vehicle Identification Number (VIN) from: 1Z7A153448, 1Z82024978, 1Z88008977, 1Z8B150592
• Fitting Position: Rear Axle, Wheel Side
• Weight [kg]: 1.324
• External Toothing wheel side: 36
• Internal Toothing wheel side: 33
• Seal Diameter [mm]: 59
• Outer Diameter [mm]: 82
• Joint Type: CV Joint
• Packaging length [cm]: 18
• Packaging width [cm]: 9
• Packaging height [cm]: 9
• Manufacturer: FEBEST

• Vehicle Identification Number (VIN) from: 1Z-4-000 001
• Transmission Type: 6-Speed Automatic Transmission
• Fitting Position: transmission sided
• Joint Type: Tripod Joint
• Drive Shaft: without ABS ring
• Length [mm]: 88
• Internal Toothing differential side, conn. to conn. shaft: 34
• Joint Diameter [mm]: 80
• Surface: Powder coated
• Name: LIIGENDLAAGER, VEOVOLL
• Manufacturer: MEY