Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Fitting Position: Front Axle Left,
Lower, Rear - Control/Trailing Arm Type: Control Arm
-
Mounting Type: Rubber-
Metal Mount -
Lisainfo: MITSUBISHI,
VOLVO -
Additional information: MITSUBISHI,
VOLVO
-
Fitting Position: outer,
Front Axle Right - Axle alignment required after fitting:
-
paired article number: V95-
0140 - Weight [kg]: 0.222
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Rear Axle,
inner, outer, Left, Right, Lower, Rear -
Fabrication Number: ZTT-
MS- 000C - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: Rear Axle
- Control/Trailing Arm Type: for control arm
-
Fabrication Number: ZTT-
MS- 000B - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Fitting Position: Lower,
Front Axle Left, Front Axle Right - Height [mm]: 60
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 37
- Control/Trailing Arm Type: Control Arm
-
Mounting Type: Rubber-
Metal Mount - Name: Control arm bush left=right
- Quality class: PJ
Lisainfo: "Tootja: SRL
VOLVO S/V40
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
VOLVO S/V40
(kvaliteediklass: PJ)"
-
Fitting Position: outer,
Rear Axle Lower -
Control/Trailing Arm Type: for semi-
trailing arm -
Fabrication Number: ZTT-
MS- 000A - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Fitting Position: Front Axle,
Centre -
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Weight [kg]: 0.13
-
Name: DY 37-
09400- 6 - Manufacturer: DYS
- Fitting Position: Rear Axle Lower
-
Fabrication Number: ZTT-
MS- 007B
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Fitting Position: Front Axle,
inner, behind the axle, Left, Lower -
Fabrication Number: ZTP-
MS- 006B -
paired article number: ZTP-
MS- 006C
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Fitting Position: Front Axle,
inner, behind the axle, Right, Lower -
Fabrication Number: ZTP-
MS- 006C -
paired article number: ZTP-
MS- 006B
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Fitting Position: Rear Axle,
outer, inner -
Control/Trailing Arm Type: for semi-
trailing arm -
Fabrication Number: ZTT-
CH- 006A - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Fitting Position: inner,
Front Axle - Required quantity: 2
-
Material: Rubber/
Metal - Weight [g]: 144
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 36
- Length [mm]: 60
- Name: IM 32503
- Manufacturer: ORIGINAL IMPERIUM
-
Mounting Type: Rubber-
Metal Mount - Fitting Position: mounting
- Name: Control arm bush left=right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
VOLVO S/V40
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
VOLVO S/V40
(kvaliteediklass: PJ)"
- Control/Trailing Arm Type: for control arm
- Inner Diameter [mm]: 12
- Required quantity: 4
-
Name: Puks -
Kndmik VOLVO T. V40 WEW. - Manufacturer: TED
Fitting Position: Rear Axle Lower, both sides, Rear Axle, Lower, Rear
- Control/Trailing Arm Type: for control arm
-
Fitting Position: inner,
outer, Rear Axle, Upper, Front -
Name: Puks -
Kndmik MITSUBISHI T. COLT/ LANCER/ CARISMA - Manufacturer: MAX
- Outer Diameter [mm]: 36
-
Fitting Position: Upper,
Front, inner, outer, Rear Axle - Control/Trailing Arm Type: for control arm
- Required quantity: 2
-
Name: Puks -
Kndmik VOLVO T. V40 - Manufacturer: TED
-
Fitting Position: Rear Axle,
Left, Right - Weight [g]: 143
- Manufacturer: IMPERGOM
- Name: IM 1572
-
Fitting Position: Rear Axle,
Left, Right, Front - Weight [g]: 380
- Name: IM 1570
- Manufacturer: ORIGINAL IMPERIUM
- Fitting Position: Lower Front Axle
-
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Inner Diameter [mm]: 12.1
- Outer Diameter 1 [mm]: 38
- Outer Diameter 2 [mm]: 40
- Width [mm]: 60
- SVHC: No SVHC present!
- Manufacturer: FAG
-
Fitting Position: Front,
Lower, Front Axle Right, Front Axle Left - Height [mm]: 60
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 36
-
Name: Puks -
Kndmik VOLVO P. S40/ V40 - Manufacturer: MAX
- Control/Trailing Arm Type: for control arm
-
Fitting Position: Rear Axle,
Lower, Front -
Mounting Type: Rubber-
Metal Mount - Thickness [mm]: 50
- Outer Diameter [mm]: 36
- Inner Diameter [mm]: 13
- Manufacturer: MAX
Name: Puks - Kndmik MITSUBISHI T. COLT/ LANCER/ CARISMA
- for model year: 2000
- Length [mm]: 38.5
- Width [mm]: 38.5
- Thickness [mm]: 60
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 38.5
-
Material: Rubber/
Metal -
Fitting Position: Front Axle Left,
Front, Front Axle Right - Weight [kg]: 0.15
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 37.5
- Length [mm]: 59.7
- paired article number: 270640
- Weight [kg]: 0.14
-
Installation Information: Important:
Observe Fitting Instructions - Manufacturer: A.B.S.
Fitting Position: in front of axle, Front Axle Left, Front Axle Right, inner, Lower
-
Fitting Position: Rear,
Lower, Front Axle Left - Inner Diameter [mm]: 21
-
paired article number: 72-
2284 -
Name: Puks -
Kndmik VOLVO P. S40 97- 00 LE - Manufacturer: MAX
-
Fitting Position: Rear,
Lower, Front Axle Right - Inner Diameter [mm]: 21
-
paired article number: 72-
2283 -
Name: Puks -
Kndmik VOLVO P. S40 97- 00 PR - Manufacturer: MAX
- Required quantity: 1
-
Fitting Position: Lower Front Axle,
Right, Rear - Manufacturer: TEDGUM_TD
- Production date to: 2000
-
Fitting Position: inner,
Rear Axle Lower - Weight [kg]: 0.15
- Outer Diameter [mm]: 36
- Packaging length [cm]: 4.5
- Packaging width [cm]: 3.7
- Packaging height [cm]: 3.7
- Manufacturer: FEBEST
- Engine Code: B 4164 S2
- for model year: 2000
-
Fitting Position: Front,
Lower Front Axle - Weight [kg]: 0.189
- Packaging length [cm]: 6
- Packaging width [cm]: 4.1
- Packaging height [cm]: 4.1
- Manufacturer: FEBEST
-
Fitting Position: Front Axle,
Lower, Front - Manufacturer: DELPHI
- Name: DE TD387W
- Fitting Position: Rear Axle both sides
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 36
- Height [mm]: 45
- Name: ALT 91659AL
- Manufacturer: ALTE AUTOMOTIVE
-
Fitting Position: Lower,
Front, Rear Axle Left, Rear Axle Right - Thickness [mm]: 50
- Inner Diameter [mm]: 13
- Outer Diameter [mm]: 36
- Control/Trailing Arm Type: Control Arm
-
Mounting Type: Rubber-
Metal Mount - Name: Control arm bush left=right
- Quality class: PJ
Lisainfo: "Tootja: SRL
MITSUB. GALANT, 93-
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
MITSUB. GALANT, 93-
(kvaliteediklass: PJ)"
-
Fabrication Number: ZTT-
MS- 000D - Manufacturer: NTY
Fitting Position: Rear Axle, outer, in front of axle, Left, Right, Lower
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Width [mm]: 53
- Inner Diameter [mm]: 21
- Outer Diameter [mm]: 64
-
Fitting Position: Front Axle Left,
Rear -
Name: Puks -
Kndmik MITSUBISHI P. - Manufacturer: JPA
- Construction Year to: 07.2000
-
Fitting Position: Front Axle,
Front - Weight [kg]: 0.2
- Required quantity: 2
- Control/Trailing Arm Type: Control Arm
-
Mounting Type: Rubber-
Metal Mount - Packaging length [cm]: 11
- Packaging width [cm]: 6
- Packaging height [cm]: 6
- Manufacturer: MONROE
-
Fitting Position: outer,
Rear Axle Lower - Name: Puks
- Manufacturer: MAX
-
Fitting Position: Front Axle both sides,
Lower, Front -
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Outer Diameter [mm]: 37.8
- Inner Diameter [mm]: 12.2
- Length [mm]: 59.5
- Weight [kg]: 0.14
- Manufacturer: RTS
- Inner Diameter [mm]: 12
-
Fitting Position: Front,
Lower Front Axle, both sides - Required quantity: 2
- Manufacturer: TEDGUM_TD
- Control/Trailing Arm Type: for control arm
-
Fitting Position: inner,
outer, Rear Axle, Upper, Front - Required quantity: 2
-
Name: Puks -
Kndmik MITSUBISHI T. COLT/ LANCER/ CARISMA - Manufacturer: TED
- Width [mm]: 53
- Inner Diameter [mm]: 21
- Outer Diameter [mm]: 64
-
Fitting Position: Front Axle Right,
Rear -
Name: Puks -
Kndmik MITSUBISHI P. - Manufacturer: JPA
-
Fitting Position: Front,
Lower, Front Axle Left, Front Axle Right - Height [mm]: 60
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 36
- Supplementary Article/Supplementary Info: without holder
- Required quantity: 2
- replacement in pairs recommended:
-
Name: Puks -
Kndmik VOLVO P. S40/ V40 - Manufacturer: MEY
- Fitting Position: Rear Axle
- Width [mm]: 75
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 70
- Manufacturer: ASHIKA
- Width [mm]: 53
- Inner Diameter [mm]: 21
- Outer Diameter [mm]: 64
-
Fitting Position: Front Axle Right,
Rear - Manufacturer: ASHIKA
- Fitting Position: Rear Axle
- Required quantity: 2
-
Name: Puks -
Kndmik VOLVO T. V40 WZD. - Manufacturer: TED
- Width [mm]: 53
- Inner Diameter [mm]: 21
- Outer Diameter [mm]: 64
-
Fitting Position: Front Axle Right,
Rear - Manufacturer: JAPKO
- Fitting Position: Rear Axle
- Width [mm]: 75
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 70
- Manufacturer: JAPKO
-
Fitting Position: Front Axle,
both sides, inner - Control/Trailing Arm Type: for control arm
-
Mounting Type: Rubber-
Metal Mount - Name: COC 49398083
- Manufacturer: CORTECO
- Width [mm]: 53
- Inner Diameter [mm]: 21
- Outer Diameter [mm]: 64
-
Fitting Position: Front Axle Left,
Rear - Manufacturer: JAPKO
- Construction Year from: 01.2000
- Construction Year to: 12.2000
-
Fitting Position: Front Axle,
both sides, Front - Manufacturer: TRW
SVHC: No information available, please contact the manufacturer!
-
Fitting Position: Lower,
Front Axle Right - paired article number: 511844
- Manufacturer: GSP
- Construction Year from: 01.2000
-
Fitting Position: Rear Axle,
Lower, Front - Control/Trailing Arm Type: Control Arm
- Width [mm]: 75
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 77
-
Mounting Type: Rubber-
Metal Mount - Name: Puks
- Manufacturer: TRI
-
Lisainfo: VOLVO S40 /
V40 -
Additional information: VOLVO S40 /
V40
-
Fitting Position: Front Axle,
Lower, Rear, Right - Required quantity: 1
- paired article number: 00441663
-
Name: Puks -
Kndmik MITSUBISHI P. - Manufacturer: TED
-
Fitting Position: Rear Axle,
both sides, Front - Control/Trailing Arm Type: for trailing arm
-
Mounting Type: Rubber-
Metal Mount -
Name: Puks -
Kndmik VOLVO T. S40/ V40 - 04 PRZEDNIA L/ P - Manufacturer: MAX
-
Fitting Position: Rear Axle,
Front -
Mounting Type: Rubber-
Metal Mount
- Production date to: 2000
- Fitting Position: Rear Axle Lower
- Weight [kg]: 0.228
- Outer Diameter [mm]: 36
- Packaging length [cm]: 10.7
- Packaging width [cm]: 3.6
- Packaging height [cm]: 3.6
- Manufacturer: FEBEST
- Engine Code: B 4164 S2
- Production date from: 2000
-
Fitting Position: Lower Front Axle,
Left - Weight [kg]: 0.307
- Packaging length [cm]: 9
- Packaging width [cm]: 8
- Packaging height [cm]: 5.5
- Manufacturer: FEBEST
-
Fitting Position: Front Axle,
Lower, Rear, Left - Required quantity: 1
- paired article number: 00441664
-
Name: Puks -
Kndmik MITSUBISHI P. - Manufacturer: TED
- Engine Code: B 4164 S2
- Production date from: 2000
-
Fitting Position: Lower Front Axle,
Right - Weight [kg]: 0.301
- Packaging length [cm]: 8.2
- Packaging width [cm]: 7.5
- Packaging height [cm]: 5.7
- Manufacturer: FEBEST
- Thickness [mm]: 50
- Inner Diameter [mm]: 13
- Outer Diameter [mm]: 36
- Control/Trailing Arm Type: for control arm
-
Fitting Position: Rear Axle Left,
Lower, Front, Rear Axle Right -
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.15
-
Name: Puks -
Kndmik MITSUBISHI T. COLT/ LANCER/ CARISMA - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Rear Axle,
Lower, Front - Inner Diameter 1 [mm]: 12
- Outer Diameter 1 [mm]: 77
- Thickness 1 [mm]: 75
- Manufacturer: DELPHI
- Name: DE TD1075W
-
Fitting Position: Front,
inner, Rear Axle, Rear, outer - Outer Diameter [mm]: 40
- Control/Trailing Arm Type: for control arm
- Required quantity: 2
- Manufacturer: TEDGUM
-
Fitting Position: outer,
inner, Rear Axle - Weight [kg]: 0.171
- Packaging length [cm]: 5
- Packaging width [cm]: 3.6
- Packaging height [cm]: 3.6
- Manufacturer: FEBEST
- Thickness [mm]: 50
- Inner Diameter [mm]: 13
- Outer Diameter [mm]: 36
- Control/Trailing Arm Type: for control arm
-
Fitting Position: Rear Axle Left,
Lower, Front, Rear Axle Right -
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.15
-
Name: Puks -
Kndmik MITSUBISHI T. COLT/ LANCER/ CARISMA - Manufacturer: BLP
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Rear,
Front Axle Right - Inner Diameter [mm]: 21
- Control/Trailing Arm Type: Control Arm
-
Mounting Type: Rubber-
Metal Mount - Quality class: PJ
- Name: Control arm bush right
-
Fitting Position: Rear,
Front Axle Left - Inner Diameter [mm]: 21
- Control/Trailing Arm Type: Control Arm
-
Mounting Type: Rubber-
Metal Mount - Quality class: PJ
- Name: Control arm bush left
-
Mounting Type: Rubber-
Metal Mount - Fitting Position: mounting
- Name: Control arm bush left
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
VOLVO S/V40
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
VOLVO S/V40
(kvaliteediklass: PJ)"
- Thickness [mm]: 60
- Inner Diameter [mm]: 12
-
Outer Diameter [mm]: 38,
40 -
Material: Rubber/
Metal -
Fitting Position: Front Axle,
inner - Weight [kg]: 0.163
-
Name: Puks -
Kndmik VOLVO P. S40/ V40 - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Front Axle,
Rear, Left, Lower - Inner Diameter [mm]: 20.5
- for OE number: 30872510
- paired article number: 2256042
- Manufacturer: SASIC
- Thickness [mm]: 50
- Inner Diameter [mm]: 13
- Outer Diameter [mm]: 36
- Control/Trailing Arm Type: for control arm
-
Fitting Position: Rear Axle Left,
Lower, Front, Rear Axle Right -
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.15
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Rear Axle both sides,
Front - Required quantity: 2
- paired article number: VKDS 436004
- Height [mm]: 75
- Inner Diameter [mm]: 12.2
- Outer Diameter [mm]: 77.2
- Name: SK VKDS436004
- Manufacturer: SKF
-
Fitting Position: Front Axle,
Rear, Right, Lower - Inner Diameter [mm]: 20.5
- for OE number: MB808910
- paired article number: 2256041
- Manufacturer: SASIC
- paired article number: ADC48099
-
Fitting Position: Front Axle Left,
outer - Weight [kg]: 0.391
- Manufacturer: BLUE PRINT
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Production date to: 2000
- Fitting Position: Rear Axle Lower
- Weight [kg]: 0.365
- Packaging length [cm]: 11.5
- Packaging width [cm]: 8
- Packaging height [cm]: 4.5
- Manufacturer: FEBEST
- Fitting Position: Rear Axle both sides
- Outer Diameter [mm]: 36
- Height [mm]: 106
- Name: ALT 91658AL
- Manufacturer: ALTE AUTOMOTIVE
- Fitting Position: Rear Axle
- Width [mm]: 75
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 70
- Manufacturer: JPA
Name: Puks - Kndmik VOLVO T. S40/V40 /CARISMA/COLT/SPACE STAR DO 02/2002
- Thickness [mm]: 60
- Inner Diameter [mm]: 12
-
Outer Diameter [mm]: 36,
40 -
Material: Rubber/
Metal -
Fitting Position: Front Axle,
inner - Weight [kg]: 0.163
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Construction Year to: 07.2000
-
Fitting Position: Front Axle,
Rear - Weight [kg]: 0.27
- Control/Trailing Arm Type: Control Arm
-
Mounting Type: Rubber-
Metal Mount - paired article number: L10807
- Packaging length [cm]: 13.5
- Packaging width [cm]: 9.5
- Packaging height [cm]: 7
- Manufacturer: MONROE
- paired article number: 26863
- Width [mm]: 142
- Thickness [mm]: 55
- Inner Diameter [mm]: 21
-
Material: Rubber/
Metal -
Fitting Position: Front Axle Left,
outer - Weight [kg]: 0.382
-
Name: Puks -
Kndmik VOLVO P. S40 97- 00 LE - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- paired article number: ADC48098
-
Fitting Position: Front Axle Right,
outer - Weight [kg]: 0.39
- Manufacturer: BLUE PRINT
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Mounting Type: Rubber-
Metal Mount - Fitting Position: mounting
- Name: Control arm bush right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
VOLVO S/V40
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
VOLVO S/V40
(kvaliteediklass: PJ)"
-
Fitting Position: Right,
Front Axle - Weight [g]: 403
- Name: IM 7039
- Manufacturer: ORIGINAL IMPERIUM
- Fitting Position: Front Axle Right
- Mounting Type: Rubber Mount
- Control/Trailing Arm Type: for control arm
- Inner Diameter [mm]: 21
- Width [mm]: 55
- paired article number: 829 0276 10
- SVHC: No SVHC present!
- Manufacturer: FAG
- Fitting Position: Front Axle Left
- Mounting Type: Rubber Mount
- Control/Trailing Arm Type: for control arm
- Inner Diameter [mm]: 21
- Width [mm]: 55
- paired article number: 829 0275 10
- SVHC: No SVHC present!
- Manufacturer: FAG
-
Fitting Position: Front Axle Right,
Lower, Rear -
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Inner Diameter [mm]: 21
- Length [mm]: 117
- Weight [kg]: 0.4
- Manufacturer: RTS
- Construction Year to: 12.1999
- Construction Year from: 01.2001
-
Fitting Position: Front Axle,
both sides, Front - Manufacturer: TRW
SVHC: No information available, please contact the manufacturer!
-
Fitting Position: Front Axle Right,
Rear, Lower - Inner Diameter [mm]: 21
- Supplementary Article/Supplementary Info: with holder
- Required quantity: 1
- replacement in pairs recommended:
- paired article number: 514 308 0002
-
Name: Puks -
Kndmik VOLVO P. S40 97- 00 PR - Manufacturer: MEY
-
Fitting Position: Front Axle Left,
Rear, Lower - Inner Diameter [mm]: 21
- Supplementary Article/Supplementary Info: with holder
- Required quantity: 1
- replacement in pairs recommended:
- paired article number: 514 308 0003
-
Name: Puks -
Kndmik VOLVO P. S40 97- 00 LE - Manufacturer: MEY
-
Fitting Position: Front,
Rear Axle Upper - Weight [kg]: 0.456
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 70
- Packaging length [cm]: 7.6
- Packaging width [cm]: 7
- Packaging height [cm]: 7
- Manufacturer: FEBEST
-
Fitting Position: Rear Axle Right,
Rear Axle Left, Front - Height [mm]: 75
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 77
- Supplementary Article/Supplementary Info: without holder
- replacement in pairs recommended:
- Manufacturer: MEY
Name: Puks - Kndmik VOLVO T. S40/V40 /CARISMA/COLT/SPACE STAR PO 02/2002 75X12X77
-
Fitting Position: Front Axle Right,
Rear, Lower - paired article number: TD388W
- Manufacturer: DELPHI
- Name: DE TD389W
-
Fitting Position: Front Axle Left,
Rear, Lower - paired article number: TD389W
- Manufacturer: DELPHI
- Name: DE TD388W
- paired article number: 55 92 6863
- Width [mm]: 142
- Thickness [mm]: 55
- Inner Diameter [mm]: 21
-
Material: Rubber/
Metal -
Fitting Position: Front Axle Left,
outer - Weight [kg]: 0.222
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- paired article number: 26862
- Width [mm]: 140
- Thickness [mm]: 55
- Inner Diameter [mm]: 21
-
Material: Rubber/
Metal -
Fitting Position: Front Axle Right,
outer - Weight [kg]: 0.383
-
Name: Puks -
Kndmik VOLVO P. S40 97- 00 PR - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- paired article number: 55 92 6862
- Width [mm]: 140
- Thickness [mm]: 55
- Inner Diameter [mm]: 21
-
Material: Rubber/
Metal -
Fitting Position: Front Axle Right,
outer - Weight [kg]: 0.222
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: behind the axle,
Front Axle Left, inner, Lower - Inner Diameter [mm]: 20.5
- Outer Diameter [mm]: 62
- Length [mm]: 49
- paired article number: 270642
- Weight [kg]: 0.4
-
Installation Information: Important:
Observe Fitting Instructions - Manufacturer: A.B.S.
-
Fitting Position: behind the axle,
Front Axle Right, inner, Lower - Inner Diameter [mm]: 20.5
- Outer Diameter [mm]: 62
- Length [mm]: 49
- paired article number: 270641
- Weight [kg]: 0.4
-
Installation Information: Important:
Observe Fitting Instructions - Manufacturer: A.B.S.
-
Fitting Position: Front Axle Right,
Lower, outer -
Mounting Type: Rubber-
Metal Mount - paired article number: 49400268
- Name: COC 49400823
- Manufacturer: CORTECO
-
Fitting Position: Front Axle Left,
Lower, Rear -
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Inner Diameter [mm]: 21
- Length [mm]: 117
- Weight [kg]: 0.4
- Manufacturer: RTS
-
Fitting Position: Rear Axle,
both sides, Front - Control/Trailing Arm Type: for trailing arm
- reinforced version:
- Required quantity: 2
- Manufacturer: TEDGUM
- Fitting Position: Rear Axle
-
Mounting Type: Rubber-
Metal Mount - Inner Diameter [mm]: 12.1
- Outer Diameter [mm]: 70.1
- Width [mm]: 75
- SVHC: No SVHC present!
- Manufacturer: FAG
- Thickness [mm]: 75
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 70
-
Fitting Position: Rear Axle Left,
Rear Axle Right -
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.44
- Manufacturer: BLUEPRINT
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Thickness [mm]: 75
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 70
-
Fitting Position: Rear Axle Left,
Rear Axle Right -
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.44
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Puks - Kndmik VOLVO T. S40/V40 /CARISMA/COLT/SPACE STAR PO 02/2002
-
Fitting Position: Front,
both sides - Quality: OE Performance
- Colour: silver
- Weight [g]: 1.071
- Manufacturer: GATES PASKI PRZEWODY
- Thickness [mm]: 75
- Inner Diameter [mm]: 12.3
- Outer Diameter [mm]: 70.3
-
Fitting Position: Rear Axle Left,
Rear Axle Right -
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.458
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Rear Axle,
both sides, Front - Control/Trailing Arm Type: for trailing arm
-
Mounting Type: Rubber-
Metal Mount - Manufacturer: LEMFÃRDER
SVHC: No information available, please contact the manufacturer!