Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Supplementary Article/Info 2: with plug
- Number of wires (repair kit, cable set): 2
- Manufacturer: ABA
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. Name: Kaabli remondikomplekt, jahutusvedeliku temperatuuri andur
Manufacturer: MAGNETI MARELLI
- Construction Year from: 01.2000
- Thread Size: M12x1.5
- Supplementary Article/Info 2: with cable
- Manufacturer: VERNET
- Additional information: WS3062 VERNET
- Lisainfo: WS3062 VERNET
-
Fitting Position: both sides,
Rear - Supplementary Article/Info 2: for retrofitted equipment
-
Fabrication Number: EPDC-
VV- 003 - Manufacturer: NTY
-
Name: NTY EPDC-
VV- 003
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Sensor Type: NTC Sensor
- Spanner Size: 21
- Supplementary Article/Info 2: with seal ring
- Number of pins: 2
-
Name: Andur,
Jahutusvedeliku temp. - Manufacturer: MEY
- Sensor Type: NTC Sensor
- Mounting Type: Bolted
- Number of pins: 2
- Cable Length [mm]: 125
- Socket colour: black
- Spanner Size: 19
- Thread Size: M12x1.5
- for OE number: 9125463
- Supplementary Article/Info 2: with seal ring
-
Name: Andur,
Jahutusvedeliku temp. - Manufacturer: NRF
- Length [mm]: 210
- Housing Colour: black
- Spanner Size: 19
- Manufacturer: KAMOKA
- Model Year from: 2000
- Housing Colour: black
- Number of pins: 2
-
Thread Size: M 12X1.5-
6g - Spanner Size: 19
- Manufacturer: DELPHI
- Name: DE TS10493
- Additional information: TS10493 DEL
- Lisainfo: TS10493 DEL
- Fitting Position: Rear
- Sensor Type: Ultrasonic Sensor
- Colour: black
- Chemical Properties: Paintable
-
Manufacturer: ABAKUS DEPO/
LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.
- Sensor Type: Inductive Sensor
- Number of pins: 2
- Cable Length [mm]: 970
-
Manufacturer: ABAKUS DEPO/
LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.
- Voltage [V]: 12
- Weight [kg]: 0.03
- Operating Mode: Electric
- Number of pins: 3
- Warranty: 3 years warranty
- Name: CE 17SKV004
- Manufacturer: ESEN SKV
-
Thread Size: M12 x 1,
5 - Number of pins: 2
- Manufacturer: ERA
- Construction Year from: 01.2000
- Number of pins: 2
- Sensor Type: NTC Sensor
- Thread Size: M 12
- Thread Pitch [mm]: 1.5
- Spanner Size: 19
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Number of pins: 2
- Housing Colour: black
-
Thread Size: M 12x1,
5 - Manufacturer: FAE
-
Fitting Position: Front Axle Left,
Front Axle Right -
Fabrication Number: HCA-
VV- 001 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Number of pins: 3
- Connector Shape: rectangular
- Pressure from [kPA]: 15
- Pressure to [kPA]: 100
- Manufacturer: MEAT&DORIA
- Engine Code: B 4164 S2
-
Supplementary Article/Supplementary Info: without gasket/
seal - Transmission Type: Manual Transmission
-
Name: ANDUR,
DROSSELKLAPIASEND - Manufacturer: MAX
- Construction Year from: 01.2000
- Length [mm]: 210
-
External Thread Size: M12 x 1,
5 - Spanner Size: 19
- Number of connectors: 2
- Weight [kg]: 0.05
- Supplementary Article/Info 2: with seal ring
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear
- Colour: black
- Manufacturer: MAGNETI MARELLI
- Construction Year from: 01.2000
- Length [mm]: 210
-
External Thread Size: M12 x 1,
5 - Spanner Size: 19
- Number of connectors: 2
- Weight [kg]: 0.05
- Supplementary Article/Info 2: with seal ring
- Name: SW 55 92 8611
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Manufacturer: MAGNETI MARELLI
- Voltage [V]: 12
- Supplementary Article/Supplementary Info: without cable pull
- Weight [kg]: 0.07
- Operating Mode: Electric
- Warranty: 3 years warranty
- Manufacturer: SKV GERMANY
- Name: CE 17SKV101
- Vehicle Identification Number (VIN) to: 985261
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Sensor Type: Passive sensor
- Length [mm]: 890
- Socket colour: black
- Construction Year from: 08.1999
- Construction Year to: 04.2004
- Fitting Position: Front Axle
- Sensor Type: Passive sensor
- Manufacturer: KAMOKA UK£ADY HAMULCOWE
- Vehicle Identification Number (VIN) from: 985262
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Sensor Type: Passive sensor
- Length [mm]: 750
- Socket colour: black
-
Fitting Position: Front Axle Left,
Front Axle Right - Sensor Type: Passive sensor
- Length [mm]: 920
- Socket colour: black
- Sensor Type: NTC Sensor
- Mounting Type: Bolted
- Number of pins: 2
- Cable Length [mm]: 110
- Socket colour: black
- Spanner Size: 19
- Thread Size: M10x1
- for OE number: 7439186486
- Supplementary Article/Info 2: with seal ring
-
Name: Andur,
Jahutusvedeliku temp. - Manufacturer: NRF
- Construction Year from: 01.2000
- Number of connectors: 2
- Weight [kg]: 0.049
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year to: 12.1999
- Thread Size: M10x1.0
- Supplementary Article/Info 2: with cable
- Manufacturer: VERNET
- Additional information: WS2561 VERNET
- Lisainfo: WS2561 VERNET
- Fitting Position: Rear
- Sensor Type: Ultrasonic Sensor
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Length [mm]: 1,
038 - Number of circuits: 4
-
Lambda Sensor: Thread pre-
greased -
Fabrication Number: ESL-
VV- 000A
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Engine Code: B 4164 S2
- Model Year from: 2000
-
Thread Size: M12x1,
5 - Spanner Size: 19
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: EPS
- Sensor Type: NTC Sensor
-
Thread Size: M12 x 1,
5 - Spanner Size: 19
- Supplementary Article/Info 2: with seal ring
- Number of pins: 2
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: MEY
- Model Year from: 2000
- Mounting Type: Bolted
- Voltage [V]: 12
-
Thread Size: M12x1,
5 - Spanner Size: 19
- Sensor Type: NTC Sensor
- Number of pins: 2
- Supplementary Article/Info 2: with cable
- Assy./disassy. by qualified personnel required!:
-
SVHC: 7439-
92- 1; Lead - Name: HE 6PT009309461
- Manufacturer: HELLA
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Engine Code: B 4164 S2
- Number of pins: 3
- Voltage [V]: 12
-
Name: ANDUR,
OHUVOTU ROHK - Manufacturer: MAX
- Construction Year from: 08.1999
- Fitting Position: Front
- Length [mm]: 885
- Number of pins: 2
- Plug Type: Male
- Connector Shape: rectangular
- Voltage [V]: 12
- Weight [kg]: 0.14
- Colour: black
- Operating Mode: Electric
- Warranty: 3 years warranty
- Manufacturer: SKV GERMANY
- Name: CE 06SKV188
- Production date to: 2002
- Required quantity: 1
- Number of pins: 3
- Sensor Type: Inductive Sensor
- Supplementary Article/Info 2: with cable
- Manufacturer: BREMI
-
Fitting Position: Rear Axle Left,
Rear Axle Right -
Fabrication Number: HCA-
VV- 000 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Construction Year from: 08.1999
- Vehicle Identification Number (VIN) to: 985261
- Fitting Position: Rear Axle
- Sensor Type: Passive sensor
- Cable Length [mm]: 885
-
Name: Andur,
rattaprete arv - Manufacturer: MAX
- Supplementary Article/Info 2: with cable
- Manufacturer: FAE
- Engine Code: B 4164 S2
- Warn Temperature [°C]: 120
-
Thread Size: M12x1,
5 - Spanner Size: 24
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: EPS
- Model Year from: 2002
- Number of pins: 3
- Manufacturer: DELPHI
- Name: DE SS11464
- Fitting Position: Rear
- Number of pins: 3
- Colour: black
- Measuring Range from [kPa]: 15
- Measuring Range to [kPa]: 100
- Measuring Range from [V]: 0.21
- Measuring Range to [V]: 4.75
- Number of connectors: 3
- Manufacturer: VERNET
- Production date from: 2002
- Required quantity: 1
- Number of pins: 3
- Sensor Type: Inductive Sensor
- Supplementary Article/Info 2: without cable
- Housing Colour: black
- Manufacturer: BREMI
-
not for country specific design: Canada,
USA -
Length [mm]: 1,
038 -
Fabrication Number: ESL-
VV- 000 - Manufacturer: NTY
Fitting Position: Front, before catalytic converter, after catalytic converter Lambda Sensor: Regulating Probe, Diagnostic Probe, Thread pre-greased
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Construction Year to: 12.1999
- for OE number: 9 186 486
- Thread Size: M10
- Number of pins: 2
- Supplementary Article/Info 2: with cable
- Switch point from [°C]: 80
- Switch point to [°C]: 25
- Weight [kg]: 0.032
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year from: 08.1999
- Fitting Position: Front Axle
- Sensor Type: Passive sensor
- Cable Length [mm]: 878
-
Name: ANDUR,
RATTAPRETE ARV - Manufacturer: MAX
-
Fitting Position: both sides,
Rear - Quantity: 4
-
Supplementary Article/Supplementary Info: without gaskets/
seals - Diameter [mm]: 23
- Chemical Properties: Paintable
-
Name: Sensor,
parkimisabi - Manufacturer: TRI
- Engine Code: B 4164 S2
- Model Year to: 1999
- Housing Colour: black
- Thread Size: M10x1
- Spanner Size: 19
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: EPS
- Number of pins: 5
- Connector Shape: D Shape
- Supplementary Article/Info 2: with integrated air temperature sensor
- Housing Type: with housing
-
Manufacturer: ABAKUS DEPO/
LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.
- Number of connectors: 3
- Weight [kg]: 0.025
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Country Specific Design: Canada,
USA -
Lambda Sensor: Diagnostic Probe,
Thread pre- greased -
Fabrication Number: ESL-
SK- 000 - Manufacturer: NTY
-
Name: NTY ESL-
SK- 000
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Vehicle Identification Number (VIN) to: 985261
- Required quantity: 2
- Fitting Position: Rear Axle
- Supplementary Article/Info 2: with cable
- Manufacturer: BREMI
- Cable Length [mm]: 143
- Number of pins: 2
- Connecting thread: M10 x 1
- Manufacturer: ERA
- Number of pins: 3
- Connector Shape: oval
- Rotation Direction: Clockwise rotation
- Supplementary Article/Info 2: without cable
- Quality: OE EQUIVALENT
-
Name: Andur,
soidupedaaliasend - Manufacturer: MD
- Number of pins: 3
- Operating Mode: Mechanical
- Rotation Direction: Clockwise rotation
-
Name: ANDUR,
DROSSELKLAPIASEND - Manufacturer: DLP
- Fitting Position: Rear
- Sensor Type: Ultrasonic Sensor
- Colour: black
- Number of pins: 3
- Connector Shape: oval
- for OE number: 8641281
-
Name: Sensor,
parkimisabi - Manufacturer: MD
- Construction Year to: 12.1999
- Number of pins: 2
- Connector Shape: oval
- Socket colour: black
- Cable Length [mm]: 140
- Thread Size: M10x1 mm
- Sensor Type: NTC Sensor
- Spanner Size: 19 mm
-
for OE number: 74 39 186 486,
3545031, 9186486 - Manufacturer: MEAT&DORIA
-
Fitting Position: Front Axle Left,
Front Axle Right - Cable Length [mm]: 940
- Number of pins: 2
- Fitting Depth [mm]: 28
- Manufacturer: ERA
- Technical Information Number: Universal
- Overall Length [mm]: 325
- Number of pins: 4
- Lambda Sensor: Regulating Probe
- Manufacturer: ASHIKA
-
Lisainfo: 43-
U04 -
Additional information: 43-
U04
-
Fitting Position: Front,
before catalytic converter -
not for country specific design: Canada,
USA -
Line insulation design: with silicone-
coated woven- fibre insulation -
Length [mm]: 1,
040 -
Lambda Sensor: Regulating Probe,
Thread pre- greased - Weight [kg]: 0.014
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Production date from: 2002
- Resistor [Ohm]: 13
- Height [mm]: 33.5
- Manufacturer: VERNET
- Construction Year to: 12.1999
- Mounting Type: Bolted
- Voltage [V]: 12
-
Resistor [Ohm]: 2,
200, 257 - Supplementary Article/Supplementary Info: with seal
- Temperature range from [°C]: 25
- Temperature range to [°C]: 80
- Thread Size: M10x1
- Sensor Type: NTC Sensor
- Number of pins: 2
- Supplementary Article/Info 2: with cable
- Housing Colour: black
- Assy./disassy. by qualified personnel required!:
-
SVHC: 7439-
92- 1; Lead - Name: HE 6PT009107281
- Manufacturer: HELLA
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Fitting Position: Front Axle
- Construction Year from: 08.1999
- Sensor Type: Passive sensor
- Number of occupied pins: 2
- Cable Length [mm]: 925
-
Name: ANDUR,
RATTAPRETE ARV - Manufacturer: DLP
- Fitting Position: Front Axle
- Required quantity: 2
- Cable Length [mm]: 920
- Fitting Depth [mm]: 27.7
-
Name: ANDUR,
RATTAPRETE ARV - Manufacturer: TRI
- Vehicle Identification Number (VIN) from: 985262
- Required quantity: 2
- Fitting Position: Rear Axle
- Supplementary Article/Info 2: with cable
- Manufacturer: BREMI
- Technical Information Number: Universal
- Overall Length [mm]: 325
- Number of pins: 4
- Lambda Sensor: Regulating Probe
- Manufacturer: JAPKO
- Fitting Position: Rear Axle
- Construction Year from: 08.1999
- Vehicle Identification Number (VIN) to: 985261
- Sensor Type: Passive sensor
- Number of occupied pins: 2
- Cable Length [mm]: 885
- Manufacturer: DELPHI
- Name: DE SS20127
- Number of pins: 3
-
Manufacturer Restriction: AM-
VERSION - Manufacturer: METZGER
- Engine Code: B 4164 S2
- Model Year from: 2003
- Length [mm]: 970
-
Name: ANDUR,
VNTVOLL - Manufacturer: EPS
Air Pressure Sensor,
DELPHI
- Number of pins: 3
- Pressure from [kPA]: 20
-
Name: ANDUR,
OHUVOTU ROHK - Manufacturer: DLP
- Operating Mode: Electric
- Manufacturer: MAGNETI MARELLI
- Vehicle Identification Number (VIN) from: 130000
- Sensor Type: Passive sensor
- Cable Length [mm]: 890
- Number of pins: 2
- Fitting Position: Front Axle
-
Name: ANDUR,
RATTAPRETE ARV - Manufacturer: MEY
- Construction Year from: 08.1999
- Construction Year to: 04.2004
- Fitting Position: Front Axle
-
Manufacturer Restriction: AM-
Version - Manufacturer: METZGER
- Fitting Position: Rear
- Required quantity: 4
- Sensor Type: Ultrasonic Sensor
- Chemical Properties: Paintable
-
Connector Shape: right-
angled - Number of pins: 3
- Manufacturer: METZGER
- Model Year to: 1999
- Sensor Type: NTC Sensor
- Thread Size: M10x1
- Spanner Size: 19
- Supplementary Article/Info 2: with seal ring
- Number of pins: 2
- Manufacturer: MEYLE
- Vehicle Identification Number (VIN) to: 985261
- Sensor Type: Inductive Sensor
- Cable Length [mm]: 855
- Number of pins: 2
- Fitting Position: Rear Axle
-
Name: ANDUR,
RATTAPRETE ARV - Manufacturer: MEY
- Transmission Type: Manual Transmission
- Manufacturer: METZGER
- Number of pins: 5
- Suction pipe connector diameter [mm]: 70
- Quality class: PJ
- Name: Air flow sensor
- Fitting Position: Rear Axle
- Required quantity: 2
- Vehicle Identification Number (VIN) to: 985261
- Cable Length [mm]: 875
- Fitting Depth [mm]: 19.9
-
Name: ANDUR,
RATTAPRETE ARV - Manufacturer: TRI
- Number of pins: 2
- Connector Shape: rectangular
- Supplementary Article/Info 2: with cable
- Manufacturer: FAE
-
Fabrication Number: EPP-
VV- 003 - Manufacturer: NTY
-
Lisainfo: VOLVO S40 I,
V40 1.6/ 1.8/ 2.0 95- 04 (5PIN) -
Additional information: VOLVO S40 I,
V40 1.6/ 1.8/ 2.0 95- 04 (5PIN)
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Number of pins: 3
- Pressure from [kPA]: 15
- Pressure to [kPA]: 100
- Manufacturer: FAE
-
Pressure [Pa] from: 20,
000 -
Pressure [Pa] to: 100,
000 - Voltage [V]: 5
- Number of pins: 3
- Assy./disassy. by qualified personnel required!:
- Name: HE 6PP009400221
- Manufacturer: HELLA
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Model Year from: 2000
- Number of connectors: 5
- Housing Type: with housing
- Manufacturer: JP GROUP
- Lisainfo: Air Mass Sensor
- Additional information: Air Mass Sensor
-
Lambda Sensor: Regulating Probe,
Planar probe, Heated -
not for country specific design: Canada,
USA - Fitting Position: before catalytic converter
- Cable Length [mm]: 1
- Name: LAMBDA ANDUR
- Manufacturer: DLP
- Engine Code: B 4164 S2
-
Name: ANDUR,
DROSSELKLAPIASEND - Manufacturer: EPS
- Vehicle Identification Number (VIN): [;985261]
-
Fitting Position: Right,
Left, Rear Axle - Cable Length [mm]: 920
- Name: SN ASB165.11
-
Manufacturer: NTN-
SNR
- Lambda Sensor: Diagnostic Probe
- Voltage [V]: 12
- Length [mm]: 898
- Number of circuits: 4
- Weight [kg]: 0.16
- Resistor [Ohm]: 9
- Operating Mode: Electric
- Warranty: 3 years warranty
- Manufacturer: SKV GERMANY
- Name: CE 09SKV659
- Engine Code: B 4164 S2
- Manufacturer Restriction: DELPHI
- Pressure from [kPA]: 15
- Pressure to [kPA]: 102
- Output Voltage, from [V]: 0.261
- Output Voltage, up to [V]: 4.958
- Name: EP 1.993.001
- Manufacturer: EPS
- Engine Code: B 4164 S2
- Transmission Type: Automatic Transmission
- Cable Length [mm]: 970
- Number of pins: 2
- Resistor [Ohm]: 330
- Sensor Type: Inductive Sensor
- Manufacturer: MEAT&DORIA
- Engine Code: B 4164 S2
- Operating Mode: Pneumatic
-
Name: ANDUR,
OHUVOTU ROHK - Manufacturer: PIE
- Construction Year from: 04.1999
- Construction Year to: 12.1999
- Fitting Position: before catalytic converter
-
Line insulation design: with silicone-
coated woven- fibre insulation -
Lambda Sensor: Planar probe,
Heated, Thread pre- greased - Cable Length [mm]: 210
- Number of circuits: 4
- Weight [kg]: 0.09
- Manufacturer: VEMO GERMANY
Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Voltage [V]: 12
- Housing Type: with housing
- Number of pins: 5
- Weight [kg]: 0.19
- Operating Mode: Electric
- Warranty: 3 years warranty
- Manufacturer: SKV GERMANY
- Number of pins: 5
- Manufacturer: MEAT&DORIA
- Number of pins: 3
- Length [mm]: 34
- Supplementary Article/Info 2: without cable
- Sensor Type: Hall Sensor
- Shape: angled
- Model Year from: 2002
- Manufacturer: METZGER
-
Lambda Sensor: Diagnostic Probe,
Regulating Probe - Fitting Position: after catalytic converter
- Length [mm]: 740
- Number of pins: 4
- Manufacturer: FAE
- Housing Type: with housing
- Number of pins: 5
- Plug Type: Male
- Housing Colour: black
- Voltage [V]: 12
- Recommended additional repairs: Air Filter
- Manufacturer: DELPHI
-
Name: DE AF10502-
12B1
-
not for country specific design: Canada,
USA - Fitting Position: before catalytic converter
- Model Year from: 2000
- Vehicle Identification Number (VIN) to: 800053
- Lambda Sensor: Regulating Probe
- Cable Length [mm]: 740
- Number of pins: 4
- Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
- Name: HE 6PA358066091
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Operating Mode: Electric
- Manufacturer: MAGNETI MARELLI
- Required quantity: 1
- Voltage [V]: 12
- Number of pins: 5
- Name: OHUMASSIMOOTJA
- Manufacturer: BRM
-
Fitting Position: Front,
before catalytic converter -
Lambda Sensor: Regulating Probe,
Heated, Thread pre- greased -
not for country specific design: Canada,
USA - Model Year from: 2000
- Vehicle Identification Number (VIN) from: 800054
-
Line insulation design: with silicone-
coated woven- fibre insulation - Cable Length [mm]: 400
- Number of circuits: 4
- Version: 4 Ti
- Weight [kg]: 0.115
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year from: 08.2000
- Engine Code: B 4164 S2
- Lambda Sensor: Regulating Probe
- Cable Length [mm]: 400
- Number of pins: 4
- Manufacturer: FAE
- Lambda Sensor: Regulating Probe
- Construction Year from: 04.1999
- Transmission Type: Manual Transmission
- Vehicle Identification Number (VIN) to: 800053
- Number of pins: 4
- Cable Length [mm]: 740
- Manufacturer: METZGER
- Engine Code: B 4164 S2
- Number of pins: 5
- Colour: black
- Manufacturer: VDO