Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Engine Code: AHU,
ALE - Version: Economy
- Manufacturer: JP GROUP
-
Lisainfo: Oil sump gasket,
cardboard, economy version -
Additional information: Oil sump gasket,
cardboard, economy version
-
Engine Code: AHU,
ALE - Material: Rubber
- Manufacturer: JP GROUP
-
Lisainfo: Oil sump gasket,
rubber -
Additional information: Oil sump gasket,
rubber
-
Engine Code: AGR,
ALH - Block Separation:
- Material: Copper
- Thickness [mm]: 1.5
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 20
- Shape: A Shape
-
Name: RONGASTIHEND,
OLI RAVOOLUKRUVI - Manufacturer: REI
-
Lisainfo: 41-
70089- 00 -
Additional information: 41-
70089- 00
-
Engine Code: ALE,
AHU - Material: Copper
- Inner Diameter [mm]: 14
- Thickness [mm]: 1.5
- Outer Diameter [mm]: 20
- Weight [kg]: 0.007
- Fitting Position: Oil Sump
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Engine Code: ALE,
AHU - Thickness [mm]: 1.5
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 20
-
DIN/ISO: 7603 A/
CU - Material: Copper
- Weight [kg]: 0.002
- Observe service information:
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Engine Code: ALE,
AHU - Thickness [mm]: 1.5
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 20
-
DIN/ISO: 7603 A/
CU - Material: Copper
- Weight [kg]: 0.002
-
Name: RONGASTIHEND,
OLI RAVOOLUKRUVI - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Material: Aluminium
- Outer Diameter [mm]: 20
- Inner Diameter [mm]: 14
- Thickness [mm]: 1.5
- Shape: A Shape
- Name: USZCZELKA RUBY SPUSTU OLEJU 14X20X1.5 ALU
- Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Outer Diameter [mm]: 20
- Inner Diameter [mm]: 14
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Material: Copper
- Outer Diameter [mm]: 20
- Inner Diameter [mm]: 14
- Thickness [mm]: 1.5
- Shape: A Shape
- DIN/ISO: 7603
-
Name: Rongastihend,
oli ravoolukruvi - Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 20
- Material: Copper
- Thickness [mm]: 1.5
- Packing Type: Blister Pack
- Manufacturer: CORTECO
- Engine Code: ALH
- Material: Silicone
- Colour: white
- Temperature range to [°C]: 200
- Manufacturer: CORTECO
- Name: COU HT200C
- Material: Silicone
- Colour: black
- Temperature range to [°C]: 300
- Manufacturer: CORTECO
- Name: COU HT300C
- Lisainfo: HT300C CORTECO
- Additional information: HT300C CORTECO
-
Engine Code: AHU,
ALE - Block Separation:
- Material: Rubber
-
Name: TIHEND,
OLIVANN - Manufacturer: MAX
-
Lisainfo: 044103609D/
MG -
Additional information: 044103609D/
MG
- Width [mm]: 68
-
Supplementary Article/Info 2: with bolts/
screws, with bore for oil- level sensor -
Fabrication Number: BMO-
VW- 048 - Manufacturer: NTY
-
Name: NTY BMO-
VW- 048
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Packing Type: Tube
- Capacity [ml]: 70
- Material: Silicone
- Colour: beige
- Observe mounting information:
-
Temperature range from [°C]: -
60 - Temperature range to [°C]: 315
- Available as universal article as well, see article no.: 030.793 Dirko
- Manufacturer: ELRING
- Lisainfo: 030.793 ELR
- Additional information: 030.793 ELR
Chemical Properties: Permanently elastic, not solvent-bearing, UV resistant
-
Engine Code: AGR,
ALH - Block Separation:
- Material: Silicone
- Colour: anthracite
- Capacity [ml]: 70
- Temperature range from [°C]: 50
- Temperature range to [°C]: 320
- Packing Type: Tube
-
only in connection with: 70-
31415- 00 -
Name: TIHEND,
KLAPIKAAN - Manufacturer: REI
Chemical Properties: not solvent-bearing, Permanently elastic, hardening
- Material: Rubber
- Thickness [mm]: 3
- Weight [kg]: 0.062
- General Information: gasket for oil sump
- Manufacturer: VIKA
-
Engine Code: AGR,
ALH -
Engine Number from: 151001,
085001 - Block Separation:
-
Chemical Properties: not solvent-
bearing - Packing Type: Tube
- Capacity [ml]: 75
- Material: Silicone
-
Temperature range from [°C]: -
60 - Temperature range to [°C]: +320
- Supplementary Article/Info 2: not contained in set
-
Name: TIHEND,
KLAPIKAAN - Manufacturer: AJU
- Additional information: AJU75000200
- Lisainfo: AJU75000200
- Engine Code: AHU
- Construction Year to: 08.1999
- Width [mm]: 265
- Length [mm]: 407
- Manufacturer: BGA
-
Engine Code: AHU,
ALE -
Name: Tihend,
karteripohi - Manufacturer: DRM
- Gasket Design: Metal Elastomer Gasket
-
Sealing lip material: ACM
(Polyacrylate) - Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Gasket Design: Metal Elastomer Gasket
-
Sealing lip material: ACM
(Polyacrylate) - Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Material: Plastic
- Number of bolts/screws: 3
- Supplementary Article/Supplementary Info: with seal
-
Supplementary Article/Info 2: with bolts/
screws - Vehicle Equipment: for vehicles without oil level sensor
- Manufacturer: METZGER
-
Engine Code: AHU,
AGR, ALH, ALE - Material: Rubber
- Manufacturer: CORTECO
- Name: COU 026316P
-
Engine Code: AHU,
ALE - Block Separation:
- Manufacturer: FISCHER
-
Engine Code: AHU,
ALE - Gasket Design: Metal Elastomer Gasket
- Thread Size: M6x1x16
-
Material: ACM
(Polyacrylate) - Manufacturer: ELRING
-
Engine Code: AHU,
ALE - Block Separation:
- Material: Rubber
-
Name: TIHEND,
OLIVANN - Manufacturer: REI
-
Engine Code: ALE,
AHU - new version:
-
Seal Material: Rubber/
Metal - Weight [kg]: 0.1
-
Name: TIHEND,
OLIVANN - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Engine Code: AGR,
ALH -
Engine Number from: 151001,
085001 - Block Separation:
-
Chemical Properties: not solvent-
bearing - Packing Type: Cartridge
- Capacity [ml]: 200
- Material: Silicone
-
Temperature range from [°C]: -
60 - Temperature range to [°C]: +320
- not for country specific design: USA
- Supplementary Article/Info 2: not contained in set
-
Name: TIHEND,
KLAPIKAAN - Manufacturer: AJU
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks