Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Fitting Position: frontal sided
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Thickness [mm]: 10
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Fitting Position: frontal sided
- Observe service information:
-
Swirl Type: Right-
hand Twist -
Material: PTFE
(polytetrafluoroethylene) - Dust Cover: with dust lip
-
Fabrication Number: NUP-
VW- 011
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: frontal sided
-
Engine Code: ALE,
AHU - Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
- Manufacturer: DELLO AUTOMEGA
- Additional information: 190017010 DELLO
- Lisainfo: 190017010 DELLO
-
Engine Code: AHU,
ALH, AGR - Fitting Position: frontal sided
-
Material: FPM
(fluoride rubber) - Inner Diameter 1 [mm]: 32
- Outer Diameter 1 [mm]: 47
- Height 1 [mm]: 10
- Swirl Type: Alternating Twist
- Dust Cover: with dust lip
- for OE number: 026103085D
-
Name: VOLLI RONGASTIHEND,
NUKKVOLL - Manufacturer: COT
- Additional information: 12012709
- Lisainfo: 12012709
- Fitting Position: frontal sided
-
Engine Code: AGR,
AHU, ALH, ALE - Block Separation:
-
Material: FPM
(fluoride rubber) - Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
- Radial Shaft Seal Design: A SL
- Swirl Type: Alternating Twist
-
Name: VOLLI RONGASTIHEND,
NUKKVOLL - Manufacturer: REI
-
Lisainfo: 81-
19299- 10 -
Additional information: 81-
19299- 10
- Fitting Position: frontal sided
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
- Radial Shaft Seal Design: ASW
- Swirl Type: Alternating Twist
-
Material: FPM
(fluoride rubber)/ ACM (polyacrylate rubber) - Dust Cover: with dust lip
- Alternative Repair Kit: 325.156
- Manufacturer: ELRING
- Lisainfo: 325.155 ELR
- Additional information: 325.155 ELR
- Thickness [mm]: 10
- for OE number: 068 103 085 E
- Fitting Position: frontal sided
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Weight [kg]: 0.023
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
-
Material: FPM
(fluoride rubber)/ ACM (polyacrylate rubber) - Dust Cover: with dust lip
- Swirl Type: Alternating Twist
- Fitting Position: frontal sided
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Front
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
-
Swirl Type: Alternating Twist,
Right- hand Twist -
Material: PTFE
(polytetrafluoroethylene) - Dust Cover: with dust lip
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: frontal sided
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
- Radial Shaft Seal Design: ASW
- Swirl Type: Alternating Twist
-
Material: FPM
(fluoride rubber) - Dust Cover: with dust lip
- Alternative Repair Kit: 325.155
- Manufacturer: ELRING
- Height [mm]: 10
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Fitting Position: frontal sided
- Engine Code: AGR
- Inner Diameter [mm]: 35
- Thickness [mm]: 10
- Outer Diameter [mm]: 48
- Fitting Position: frontal sided
- for OE number: 054 115 147 B
- Weight [kg]: 0.02
-
Material: FPM
(fluoride rubber) - Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Engine Code: AHU,
ALE, ALH - Fitting Position: frontal sided
- Inner Diameter 1 [mm]: 32
- Outer Diameter 1 [mm]: 47
- Height 1 [mm]: 10
-
Material: PTFE
(polytetrafluoroethylene) -
Swirl Type: Right-
hand Twist - Dust Cover: with dust lip
- for OE number: 038103085A
-
Name: VOLLI RONGASTIHEND,
NUKKVOLL - Manufacturer: COT
- Additional information: 20026413
- Lisainfo: 20026413
- Fitting Position: frontal sided
- Height [mm]: 10
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
-
Swirl Type: Right-
hand Twist - Manufacturer: DR MOTOR PRZEWODY PRZELEWOWE
- Fitting Position: frontal sided
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
- Radial Shaft Seal Design: ASW
-
Swirl Type: Right-
hand Twist - Dust Cover: with dust lip
- Observe mounting information:
- Manufacturer: ELRING
- Lisainfo: 129.780 ELR
- Additional information: 129.780 ELR
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) Installation Information: Mounting dry and without any additional oil and grease
-
Engine Code: ALH,
AGR - Thickness [mm]: 10
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Rotation Direction: Clockwise rotation
-
Material: ACM
(Polyacrylate), PTFE (polytetrafluoroethylene) - Supplementary Article/Info 2: with mounting sleeve
- Fitting Position: frontal sided
- Weight [kg]: 0.01
- Observe service information:
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Engine Code: AHU,
ALE, ALH, AGR - Block Separation:
-
Engine Number from: 085001,
151001 - Construction Year to: 08.1999
- Fitting Position: frontal sided
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
- Swirl Type: Alternating Twist
-
Name: VOLLI RONGASTIHEND,
NUKKVOLL - Manufacturer: AJU
- Fitting Position: Pulley side
-
Name: Volli rongastihendikomplekt,
Mootor - Manufacturer: COT
- Fitting Position: Pulley side
-
Name: VOLLI RONGASTIHENDIKOMPLEKT,
MOOTOR - Manufacturer: COT
- Additional information: 289077
- Lisainfo: 289077
- Outer Diameter [mm]: 47
- Thickness [mm]: 10
- Inner Diameter [mm]: 32
- Fitting Position: transmission sided
- Weight [kg]: 0.195
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.