• Number of pins: 3
• Connector Shape: angular
• Lisainfo: Distance sensor
• Additional information: Distance sensor

• Colour Coding: black
• Spanner Size: 13
• Thread Size: M10x1
• Number of pins: 1
• Plug Type: Blade Terminal
• Supplementary Article/Supplementary Info: with seal
• for OE number: 7203359
• Manufacturer: DELLO AUTOMEGA

• Number of pins: 4
• Fitted Diameter [mm]: 20
• Supplementary Article/Info 2: with seal ring
• for OE number: 1331294
• Manufacturer: KAMOKA

• for OE number: 357919501A
• Manufacturer: KAMOKA

• Housing Colour: red
• Manufacturer: KAMOKA

• Colour Coding: red
• Number of pins: 2
• Temperature range from [°C]: 55
• Temperature range to [°C]: 65
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MAX

• Fabrication Number: ECT-AU-004
• Number of pins: 4
• Colour Coding: green
• Connector Shape: oval
• Manufacturer: NTY

• Number of pins: 2
• Switch Point [°C]: 55, 65
• Supplementary Article/Info 2: with seal ring
• Housing Colour: brown
• Switch point from [°C]: 65
• Switch point to [°C]: 55
• Weight [kg]: 0.027
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Colour: black
• Colour Coding: blue
• Number of pins: 4
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MAX

• Sensor Type: NTC Sensor
• Mounting Type: Clipped
• Connector Shape: rectangular
• Number of pins: 2
• for OE number: 025906041A
• Supplementary Article/Info 2: with mounting parts
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Sensor Type: NTC Sensor
• Mounting Type: Clamped
• Connector Shape: D Shape
• Number of pins: 4
• for OE number: 059919501A
• Supplementary Article/Info 2: with mounting parts
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• new version:
• Outer Diameter [mm]: 20
• Number of connectors: 4
• Colour: black
• Colour Coding: blue
• Weight [kg]: 0.023
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 2
• Temperature range to [°C]: 120
• Manufacturer: ERA

Manufacturer: FAE

• Sensor Type: NTC Sensor
• Mounting Type: Clamped
• Connector Shape: rectangular
• Number of pins: 4
• Socket colour: black
• for OE number: 357919501A
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Thread Size: 20 mm
• Number of pins: 4
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: VER

• new version:
• Outer Diameter [mm]: 20
• Number of connectors: 4
• Colour: black
• Colour Coding: blue
• Weight [kg]: 0.023
• Manufacturer: SWAG
• Name: SW 30 93 0616

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: 078 919 501 C
• Manufacturer: TRUCKTEC

• Colour: black
• Supplementary Article/Supplementary Info: with seal
• Manufacturer: METZGER

• Thread Size: M20
• Number of pins: 2
• Connector Shape: rectangular
• Manufacturer: ERA

• Thread Size: M20
• Number of pins: 4
• Supplementary Article/Info 2: without cable
• Connector Shape: rectangular
• Fitted Diameter [mm]: 20
• Manufacturer: ERA

• Thread Size: 20
• Number of pins: 4
• Manufacturer: ERA

• Vehicle Identification Number (VIN) to: 6K-1-544 000
• Vehicle Equipment: for vehicles with gearshift linkage
• Voltage [V]: 12
• Number of pins: 3
• Manufacturer: DELLO AUTOMEGA

• Vehicle Identification Number (VIN) to: 6K-1-544000
• Vehicle Equipment: for vehicles with gearshift linkage
• Number of pins: 3
• Connector Shape: rectangular
• Weight [kg]: 0.04
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: ESEN SKV

• Number of pins: 2
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Diameter [mm]: 25
• Length [mm]: 42
• Weight [kg]: 0.03
• Supplementary Article/Supplementary Info: with seal
• for OE number: 6U0 919 501 B
• Colour Coding: blue
• Number of pins: 4
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• new version:
• Outer Diameter [mm]: 20
• Number of connectors: 4
• Colour: black
• Colour Coding: blue
• Weight [kg]: 0.026
• Supplementary Article/Supplementary Info: with seal, with retaining spring
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• new version:
• Outer Diameter [mm]: 20
• Number of connectors: 4
• Colour: black
• Colour Coding: blue
• Weight [kg]: 0.026
• Supplementary Article/Supplementary Info: with seal, with retaining spring
• Manufacturer: SWAG
• Name: SW 32 93 9142

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Weight [kg]: 0.017, 0.027
• Supplementary Article/Supplementary Info: with seal
• for OE number: 059 919 501 A
• Colour Coding: green
• Spring Design: Retaining Spring
• Number of pins: 4
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 3
• Weight [kg]: 0.05
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV552
• Manufacturer: ESEN SKV

• Number of pins: 3
• Connector Shape: D Shape
• Supplementary Article/Info 2: without cable
• Fitting Depth [mm]: 32.5
• Name: ANDUR,VAHEMAA
• Manufacturer: MAX

• Transmission Type: Automatic Transmission
• Manufacturer: DELLO AUTOMEGA

• Transmission Type: 4-Speed Automatic Transmission
• Number of pins: 2
• Name: ANDUR,KIIRUS
• Manufacturer: MAX
• Lisainfo: 095927321C/MG
• Additional information: 095927321C/MG

• Engine Code: ANX
• Corresponds to the original part in colour: yellow, blue, black
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Vehicle Equipment: for vehicles with manual transmission
• Connector Shape: rectangular
• Number of pins: 3
• Colour: black
• Material: Plastic
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Transmission Type: 4-Speed Automatic Transmission
• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 2
• Weight [kg]: 0.02
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: ESEN SKV

• Number of pins: 3
• Name: ANDUR,SššTEIMPULSS
• Manufacturer: MAX
• Lisainfo: 030905065/MG
• Additional information: 030905065/MG

• Thread Size: M18x1,5
• Number of pins: 3
• Manufacturer: ERA

• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 3
• Weight [kg]: 0.03
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Number of pins: 3
• Cable Length [mm]: 450
• Manufacturer: DELLO AUTOMEGA

• Supplementary Article/Info 2: with cable
• Length [mm]: 510
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Supplementary Article/Info 2: with cable
• Length [mm]: 520
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

Manufacturer: MAGNETI MARELLI

• Voltage [V]: 12
• Length [mm]: 495
• Number of pins: 3
• Weight [kg]: 0.09
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: ESEN SKV

Manufacturer: MAGNETI MARELLI

Manufacturer: DELLO AUTOMEGA

• Voltage [V]: 12
• Number of pins: 3
• Weight [kg]: 0.033
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 3
• Connector Shape: D Shape
• Number of mounting bores: 3
• Height [mm]: 83
• Fitting Depth [mm]: 52
• for OE number: 1J0 907 660 B
• Name: Andur,Mootoriolitase
• Manufacturer: MD

• Transmission Type: 4-Speed Automatic Transmission
• Number of connectors: 2
• Weight [kg]: 0.018
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Supplementary Article/Supplementary Info: with seal
• Number of pins: 3
• Number of mounting bores: 3
• Manufacturer: ERA

• Vehicle Identification Number (VIN) to: 6N-YY-050 000
• Engine Code: AKP
• Cable Length [mm]: 492
• Number of pins: 3
• Name: ANDUR, VŽNTVOLL
• Manufacturer: DLP

• Number of pins: 3
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Sensor Type: Inductive Sensor
• Number of pins: 3
• Connector Shape: D Shape
• Supplementary Article/Info 2: with cable
• Weight [kg]: 0.07
• Name: Andur, v„ntvoll
• Manufacturer: VAL

• Vehicle Identification Number (VIN) from: 6K-Y-502 795
• Number of connectors: 7
• Weight [kg]: 0.12
• Name: LšLITI,KŽIK
• Manufacturer: FEB

Transmission Type: 4-Speed Automatic Transmission, for automatic transmission General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Type: 4-Speed Automatic Transmission
• Voltage [V]: 12
• Weight [kg]: 0.07
• Operating Mode: Electric
• Number of pins: 7
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 96SKV003

• Vehicle Identification Number (VIN) from: 6K-Y-502 795
• Transmission Type: 4-Speed Automatic Transmission
• Number of pins: 7
• Weight [kg]: 0.045
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Cable Length [mm]: 535
• Number of pins: 3
• Number of connectors: 3
• Rated Voltage [V]: 12
• Connector Shape: D Shape
• Resistor M[ohm]: 1.8
• Weight [kg]: 0.048
• Manufacturer: VEMO GERMANY

Supplementary Article/Info 2: for crankshaft, with cable, with screw, with protection hose General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Quality: IAM
• Manufacturer: METZGER

• Vehicle Identification Number (VIN) from: 6K-1-529 201
• Length [mm]: 480
• Number of connectors: 3
• Sensor Type: Hall Sensor
• Cable Length [mm]: 435
• Weight [kg]: 0.045
• Supplementary Article/Info 2: with screw
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) from: 6K-1-529 201
• Length [mm]: 480
• Number of connectors: 3
• Sensor Type: Hall Sensor
• Cable Length [mm]: 435
• Weight [kg]: 0.045
• Supplementary Article/Info 2: with screw
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: ANX
• Sensor Length [mm]: 63.7
• Manufacturer: EPS

• Name: ANDUR, VŽNTVOLL
• Manufacturer: BOS