• Supplementary Article/Info 2: with mounting sleeves
• Fitting Position: Front Axle, both sides, Rear
• Quantity per axle: 2
• Control/Trailing Arm Type: for control arm
• Manufacturer: LEMFÖRDER

SVHC: No information available, please contact the manufacturer!

• new version:
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Info 2: without ball joint, with coupling rod
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.739
• for OE number: 191 407 153 S2
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Left, Front Axle Right, Lower
• Control/Trailing Arm Type: Control Arm
• Manufacturer: JP-GROUP
• Lisainfo: Wishbone, front
• Additional information: Wishbone, front

• Control/Trailing Arm Type: Control Arm
• Base body material: Steel
• Fitting Position: Front Axle
• Net weight [kg]: 2,498
• Diameter 1 [mm]: 17
• Diameter 2 [mm]: 12
• Supplementary Article/Info 2: without ball joint
• Name: OMG G40.3638/S
• Manufacturer: OMG

• Vehicle Identification Number (VIN) from: 6K-Y-504 289, 6K-X-610 000
• Vehicle Identification Number (VIN) to: 6K-X-610 000*, 6K-Y-504 288
• Fitting Position: Front Axle Right, Lower
• Control/Trailing Arm Type: Control Arm
• Manufacturer: DELLO AUTOMEGA

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Lower, Front Axle Left, Front Axle Right
• Material: Sheet Steel
• Name: Control arm left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
IBIZA/TOL/COR/GOLF
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
IBIZA/TOL/COR/GOLF
(kvaliteediklass: PJ)"

• Material: Sheet Steel
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Lower, Front Axle
• Article number of the recommended special tool: V99-1020
• Supplementary Article/Info 2: with bearing
• Axle alignment required after fitting:
• Weight [kg]: 1.98
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Material: Sheet Steel
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle Left, Lower, Front Axle Right
• Weight [kg]: 2.456
• Supplementary Article/Info 2: with bearing
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Right, Lower
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Info 2: with ball joint
• Joint Diameter [mm]: 19
• Manufacturer: JP GROUP
• Lisainfo: Track Control Arm
• Additional information: Track Control Arm

• Fitting Position: Front Axle Left, Lower
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Info 2: with ball joint
• Joint Diameter [mm]: 19
• Manufacturer: JP GROUP
• Lisainfo: Track Control Arm
• Additional information: Track Control Arm

• Fitting Position: Front Axle Left, Lower, Front Axle Right
• Control/Trailing Arm Type: Control Arm
• Manufacturer: GSP

• Fitting Position: Front Axle Right, Lower Front Axle
• Control/Trailing Arm Type: Control Arm
• Length [mm]: 276
• Inner Diameter 1 [mm]: 12.2
• paired article number: TRC9608
• Supplementary Article/Info 2: with ball joint
• Manufacturer: BGA

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Lower Front Axle, Lower, both sides

• Material: Sheet Steel
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle Left, Lower, Front Axle Right
• Weight [kg]: 2.456
• Supplementary Article/Info 2: with bearing
• Name: SW 30 73 0013
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Left, Lower Front Axle
• Control/Trailing Arm Type: Control Arm
• Length [mm]: 276
• Inner Diameter 1 [mm]: 12.2
• paired article number: TRC9609
• Supplementary Article/Info 2: with ball joint
• Manufacturer: BGA

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle both sides, Lower
• Weight [kg]: 2.2
• Manufacturer: RTS

• Fitting Position: Front Axle Left, Lower
• Thread Size 1: Pinch Bolt 19mm
• Material: Sheet Steel
• paired article number: TC765
• Control/Trailing Arm Type: Trailing Arm
• Supplementary Article/Info 2: with ball joint
• Length [mm]: 428
• Width [mm]: 68
• Name: DE TC764
• Manufacturer: DELPHI

• Fitting Position: Lower, Front Axle both sides
• Required quantity: 2
• Control/Trailing Arm Design: Triangular Control Arm
• paired article number: VKDS 321000
• Hole Pitch 1/ Hole Pitch 2: 274
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Info 2: without ball joint
• Name: SK VKDS321000
• Manufacturer: SKF

• Control/Trailing Arm Type: Control Arm
• Quantity Unit: Set
• Fitting Position: Lower, Front Axle Right
• Cone Size [mm]: 19
• Material: Sheet Steel
• Rod/Strut: Push Rod
• Quality class: PJ
• Name: Control arm right

Lisainfo: "Tootja: SRL
SEAT IBIZA/CORDOBA
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
SEAT IBIZA/CORDOBA
(kvaliteediklass: PJ)"

• Control/Trailing Arm Type: Control Arm
• Quantity Unit: Set
• Fitting Position: Lower, Front Axle Left
• Cone Size [mm]: 19
• Material: Sheet Steel
• Rod/Strut: Push Rod
• Quality class: PJ
• Name: Control arm left

• paired article number: 30 93 7186
• new version:
• Cone Size [mm]: 19
• Material: Sheet Steel
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle Right, Lower
• Weight [kg]: 3.134
• Supplementary Article/Info 2: with bearing
• Name: SW 30 93 7306
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle, Lower, both sides
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Info 2: without ball joint, with rubber mount
• only in connection with: 31317 02, 31335 01
• Material: Sheet Steel
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle Right, Front Axle Left
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Info 2: with ball joint
• Name: COC 49399019
• Manufacturer: CORTECO

• paired article number: 37186
• new version:
• Cone Size [mm]: 19
• Material: Sheet Steel
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle Right, Lower
• Weight [kg]: 3.134
• Supplementary Article/Info 2: with bearing
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• paired article number: 37306
• new version:
• Cone Size [mm]: 19
• Material: Sheet Steel
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle Left, Lower
• Weight [kg]: 3.134
• Supplementary Article/Info 2: with bearing
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Lower, Front Axle both sides
• Required quantity: 2
• Control/Trailing Arm Design: Triangular Control Arm
• paired article number: VKDS 321000 B
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Supplementary Info: with synthetic grease
• Supplementary Article/Info 2: with ball joint
• Name: SK VKDS321000B
• Manufacturer: SKF

• Fitting Position: Lower, both sides
• Control/Trailing Arm Type: Control Arm
• Name: COC 49399747
• Manufacturer: CORTECO

• Fitting Position: Front Axle Left, outer, Lower
• Cone Size [mm]: 19
• Supplementary Article/Info 2: with ball joint, with rubber mount
• Material: Steel
• Length [mm]: 395
• Control/Trailing Arm Type: Control Arm
• as standard:
• paired article number: 210496
• Weight [kg]: 3.142
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• old version:
• Material: Sheet Steel
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Info 2: with coupling rod, without ball joint
• Fitting Position: Front Axle Left, Lower, Front Axle Right
• Weight [kg]: 2.7
• Supplementary Article/Supplementary Info: with attachment material
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Left, Lower
• Control/Trailing Arm Type: Control Arm
• Cone Size [mm]: 19
• Material: Sheet Steel
• paired article number: 20-00203-1
• Weight [kg]: 3.08
• Name: DY 20-00203-2
• Manufacturer: DYS

• Fitting Position: Front Axle Right, Lower
• Control/Trailing Arm Type: Control Arm
• Cone Size [mm]: 19
• Material: Sheet Steel
• paired article number: 20-00203-2
• Weight [kg]: 3.16
• Name: DY 20-00203-1
• Manufacturer: DYS

• Fitting Position: Front Axle, Left, Right, outer, Lower
• Weight [kg]: 2.65
• Required quantity: 2
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Info 2: with rubber mount, without ball joint
• Packaging length [cm]: 42
• Packaging width [cm]: 39
• Packaging height [cm]: 6
• Manufacturer: MONROE

• Fitting Position: Front Axle, Left, outer, Lower
• Weight [kg]: 2.7
• Required quantity: 1
• Cone Size [mm]: 19
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Info 2: with ball joint, with rubber mount
• paired article number: L29551
• Packaging length [cm]: 44
• Packaging width [cm]: 38
• Packaging height [cm]: 7
• Manufacturer: MONROE

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle Right, Lower
• Outer Diameter [mm]: 19
• Weight [kg]: 2.64
• Manufacturer: RTS

• Fitting Position: Front Axle Right, outer, Lower
• Cone Size [mm]: 19
• Supplementary Article/Info 2: with ball joint, with rubber mount
• Material: Steel
• Length [mm]: 395
• Control/Trailing Arm Type: Control Arm
• as standard:
• paired article number: 210495
• Weight [kg]: 3.166
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Fitting Position: Front Axle
• Control/Trailing Arm Type: Control Arm
• Material: Sheet Steel
• Supplementary Article/Info 2: without ball joint
• SVHC: No SVHC present!
• Manufacturer: FAG
• Name: LU 821030310

• Name: Control arm left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
IBIZA/TOL/COR/GOLF
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle, Lower, both sides
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Info 2: without ball joint, with rubber mount
• only in connection with: 31317 02, 31335 01
• Material: Sheet Steel
• Manufacturer: LEMFORDER

SVHC: No information available, please contact the manufacturer!

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle Left, Lower
• Outer Diameter [mm]: 19
• Weight [kg]: 2.64
• Manufacturer: RTS

• Cone Size [mm]: 19
• Material: Sheet Steel
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Info 2: with coupling rod, with ball joint
• Fitting Position: Front Axle Left, Lower, Front Axle Right
• Weight [kg]: 3.04
• Supplementary Article/Supplementary Info: with attachment material
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Right, Lower
• Control/Trailing Arm Type: Control Arm
• only in connection with: 55001218 / 6-S012
• paired article number: 58006011
• Warranty: 3 years warranty or until 75,000km
• Manufacturer: METZGER

Supplementary Article/Info 2: with ball joint, with rubber mount, with mounting sleeves

• Fitting Position: Front Axle Left
• Control/Trailing Arm Type: Control Arm
• Manufacturer: MAGNETI MARELLI

• Fitting Position: Front Axle Right
• Control/Trailing Arm Type: Control Arm
• Manufacturer: MAGNETI MARELLI