• Vehicle Identification Number (VIN) from: 80-L-000 001
• Transmission Type: 5-Speed Manual Transmission
• Thread Size: M12x1,5
• Number of pins: 2
• Manufacturer: DELLO AUTOMEGA

• Rated Voltage [V]: 12
• Number of connectors: 2
• Operating Mode: Electric
• Transmission Type: 5-Speed Manual Transmission
• Vehicle Equipment: for vehicles with gear shift cable
• Manufacturer: JP GROUP
• Lisainfo: Switch for reversing light
• Additional information: Switch for reversing light

• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Vehicle Identification Number (VIN) from: 127 904
• Operating Mode: Electric
• Number of pins: 2
• Manufacturer: DELLO AUTOMEGA

• Lisainfo: Switch for reversing light, 4 speed
• Additional information: Switch for reversing light, 4 speed

• Vehicle Identification Number (VIN) to: ..-F-127 903
• Operating Mode: Hydraulic, Electric
• Number of pins: 2
• Thread Size: M10x1
• Manufacturer: DELLO AUTOMEGA

• External Thread Size: M12 x 1,5
• Number of connectors: 2
• Operating Mode: Electric
• Control Type: Push control
• Weight [kg]: 0.035
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Colour: black
• Number of pins: 2
• Weight [g]: 26
• Manufacturer: METALCAUCHO

• Number of pins: 2
• Thread Size: M12X1,5
• Manufacturer: MEAT&DORIA

• Operating Mode: Hydraulic
• Combi Switch Function: Normally Open Contact
• Switch pressure from [bar]: 3
• Switch pressure to [bar]: 6
• Lisainfo: Brake light switch, 2 pins
• Additional information: Brake light switch, 2 pins

• Operating Mode: Mechanical
• for OE number: 191945515
• Number of pins: 2
• Manufacturer: MEAT&DORIA

• Operating Mode: Mechanical
• Number of pins: 2
• Technical Information Number: circuit N.C.
• Manufacturer: ERA

• Manufacturer: DELLO AUTOMEGA

Left-/right-hand drive vehicles: for right-hand drive vehicles, for left-hand drive vehicles

• Operating Mode: Hydraulic
• Thread Size: M10x1.0
• Sensor Type: Open-style sensor
• Manufacturer: VERNET

• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Housing Colour: black
• Number of connectors: 7
• Colour: red
• Material: Plastic
• Control Type: Flip Switch Control
• Fitting Position: Dashboard
• Weight [kg]: 0.03
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) from: 80-K-060 001
• Number of pins: 10
• Manufacturer: DELLO AUTOMEGA

• Vehicle Identification Number (VIN) from: 80L000001
• Thread Size: M12x1.5
• Sensor Type: Open-style sensor
• Manufacturer: VERNET

• Thread Size: M12 x 1,5
• Spanner Size: 21
• Number of pins: 2
• Technical Information Number: circuit N.O.
• Manufacturer: ERA

• External Thread [mm]: M12 x 1,5
• Number of pins: 2
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Operating Mode: Mechanical
• Sensor Type: Closed-type Sensor
• Number of connectors: 2
• Manufacturer: VERNET

• Thread Size: M10x1,0
• Switch Pressure [bar]: 5
• Fitting Position: Footwell
• Operating Mode: Electric
• Spanner Size: 22
• Mounting Type: Bolted
• Number of pins: 2
• Combi Switch Function: Normally Open Contact
• Rated Voltage [V]: 12
• Plug Type: Blade Terminal
• Observe the vehicle manufacturer specifications:
• Weight [kg]: 0.041
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Vehicle Identification Number (VIN) to: 80K220000
• Thread Size: M12x1.5
• Sensor Type: Open-style sensor
• Manufacturer: VERNET

• Colour: black
• Manufacturer: DELLO AUTOMEGA

• Engine Code: MN
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Adjustment: with automatic adjustment
• Operating Mode: Mechanical
• Name: EP 1.810.055
• Manufacturer: EPS

• Vehicle Identification Number (VIN) to: 80K220000
• Thread Size: M18x1.5
• Sensor Type: Open-style sensor
• Manufacturer: VERNET

• Thread Size: M12x1,5
• Manufacturer: FAE

• Voltage [V]: 12
• Operating Mode: Electric
• Number of pins: 8
• Weight [kg]: 0.06
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: ESEN SKV

• Engine Code: MN
• Vehicle Identification Number (VIN) to: 80-K-220000
• Transmission Type: 4-Speed Manual Transmission
• Thread Size: M18x1,5
• Spanner Size: 22
• Name: EP 1.860.010
• Manufacturer: EPS

• Voltage [V]: 12
• Operating Mode: Electric
• Number of pins: 10
• Weight [kg]: 0.08
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Engine Code: MN
• Brake System: Hydraulic
• Thread Size: M10x1
• Spanner Size: 22
• Operating Mode: Hydraulic, Mechanical
• Name: EP 1.810.102
• Manufacturer: EPS

• General Information: switch for reversing light
• Manufacturer: BORSEHUNG

• Vehicle Identification Number (VIN) from: 80L000001
• Thread Size: M18x1.5
• Sensor Type: Open-style sensor
• Manufacturer: VERNET

• Engine Code: MN
• Vehicle Identification Number (VIN) from: 80-L-000001
• Transmission Type: 5-Speed Manual Transmission
• Thread Size: M12x1,5
• Spanner Size: 21
• Name: EP 1.860.125
• Manufacturer: EPS

• Required quantity: 1
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Colour: black
• Control Type: Flip Switch Control
• Number of pins: 7
• Material: Plastic
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Number of pins: 4
• Combi Switch Function: with indicator function, with high beam function
• Weight [kg]: 0.094
• Manufacturer: ERA

• Left-/right-hand drive vehicles: for left-hand drive vehicles
• for OE number: 161 953 235 B
• Colour: black
• Material: Plastic
• Mounting Type: Clipped
• Number of pins: 7
• Control Type: Flip Switch Control
• Weight [kg]: 0.028
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Colour: black
• Number of pins: 8
• Weight [kg]: 0.2
• Manufacturer: VEMO GERMANY

Combi Switch Function: with rear wipe-wash function, with wipe-wash function, with wipe interval function General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 12
• Weight [kg]: 0.102
• Manufacturer: ERA

Combi Switch Function: with rear wipe-wash function, with wipe-wash function, with wipe interval function

• Colour: black
• Number of pins: 8
• Control Type: Flip Switch Control
• Material: Plastic
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Vehicle Identification Number (VIN) from: 80-K-060 001
• Colour: black
• Number of pins: 10
• Manufacturer: MEYLE

• Operating Mode: Hydraulic
• Voltage [V]: 12
• Switch Pressure [bar]: 5
• Thread Size: M10x1
• Spanner Size: 22
• Number of pins: 2
• Combi Switch Function: Normally Open Contact
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Manufacturer: HELLA

• Mounting Type: Bolted
• Voltage [V]: 12
• Number of pins: 2
• Combi Switch Function: Normally Open Contact
• Thread Size: M18x1,5
• Operating Mode: Electric
• Spanner Size: 22
• Plug Type: Blade Terminal
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA

• Engine Code: MN
• Construction Year to: 12.1986
• Vehicle Identification Number (VIN) to: -G-222 000
• Colour: black
• Number of pins: 11
• Manufacturer: AIC

Combi Switch Function: with indicator function, with wipe-wash function, with rear wipe-wash function General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Engine Code: MN
• Colour: black
• Number of pins: 8
• Manufacturer: AIC

Combi Switch Function: with indicator function, with wipe-wash function, with rear wipe-wash function General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.