• Fitting Position: Front Axle both sides, inner
• Lisainfo: Wheel bearing, front, inner
• Additional information: Wheel bearing, front, inner

• Supplementary Article/Info 2: with wheel hub
• Fitting Position: Rear Axle, Rear Axle Left, Rear Axle Right
• Fabrication Number: KLT-VW-000
• Manufacturer: NTY
• Name: NTY KLT-VW-000

• Fitting Position: Rear Axle
• Width 1 [mm]: 13.9
• Width 2 [mm]: 14.2
• Outer Diameter 1 [mm]: 39.9
• Outer Diameter 2 [mm]: 50.3
• Inner Diameter 1 [mm]: 17.5
• Inner Diameter 2 [mm]: 29
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: MAX

• Name: Wheel bearing kit
• Quality class: PJ

Lisainfo: "Tootja: CX
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle
• Width 1 [mm]: 14
• Width 2 [mm]: 14
• Outer Diameter 1 [mm]: 40
• Outer Diameter 2 [mm]: 50
• Inner Diameter 1 [mm]: 18
• Inner Diameter 2 [mm]: 29
• Quality class: PJ
• Name: Wheel bearing kit

• Fitting Position: Rear Axle Left, Rear Axle Right
• Inner Diameter 1 [mm]: 29
• Inner Diameter 2 [mm]: 17.5
• Outer Diameter 1 [mm]: 50
• Width 1 [mm]: 15
• Width 2 [mm]: 15
• Outer Diameter 2 [mm]: 40
• Weight [kg]: 0.3
• Manufacturer: A.B.S.

• Fitting Position: Rear Axle
• Width 1 [mm]: 15
• Width 2 [mm]: 14
• Inner Diameter 1 [mm]: 29
• Inner Diameter 2 [mm]: 17
• Outer Diameter 1 [mm]: 50
• Outer Diameter 2 [mm]: 40
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• for OE number: 191 598 625
• Inner Diameter [mm]: 17.5
• Fitting Position: Rear Axle both sides
• Manufacturer: TRUCKTEC

• Fitting Position: Rear Axle
• Width [mm]: 15
• Inner Diameter [mm]: 19
• Outer Diameter [mm]: 50
• Bearing Type: Roller Bearing
• Supplementary Article/Info 2: with seal ring
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Rear Axle
• Width 1 [mm]: 13.9
• Width 2 [mm]: 14.2
• Outer Diameter 1 [mm]: 39.9
• Outer Diameter 2 [mm]: 50.3
• Inner Diameter 1 [mm]: 17.5
• Inner Diameter 2 [mm]: 29
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Rear Axle
• Width [mm]: 14.7
• Inner Diameter [mm]: 17.5
• Outer Diameter [mm]: 39.9
• Width 1 [mm]: 13.8
• Width 2 [mm]: 14.2
• Outer Diameter 1 [mm]: 50.3
• Inner Diameter 1 [mm]: 29
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: OPT

• Fitting Position: Rear Axle
• Width [mm]: 14.6
• Inner Diameter [mm]: 17.46
• Outer Diameter [mm]: 39.88
• Width 2 [mm]: 14.73
• Inner Diameter 2 [mm]: 29
• Outer Diameter 2 [mm]: 50.29
• Net weight [kg]: 0.31
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: NK

• Bearing Type: Tapered Roller Bearing
• Fitting Position: Rear Axle Left, Rear Axle Right
• Outer Diameter 1 [mm]: 40
• Outer Diameter 2 [mm]: 50
• Width 1 [mm]: 14
• Width 2 [mm]: 14
• Inner Diameter 1 [mm]: 17.5
• Inner Diameter 2 [mm]: 29
• Weight [kg]: 0.234
• Supplementary Article/Info 2: with shaft seal
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Bearing Type: Tapered Roller Bearing
• Fitting Position: Rear Axle Left, Rear Axle Right
• Outer Diameter 1 [mm]: 40
• Outer Diameter 2 [mm]: 50
• Width 1 [mm]: 14
• Width 2 [mm]: 14
• Inner Diameter 1 [mm]: 17.5
• Inner Diameter 2 [mm]: 29
• Weight [kg]: 0.254
• Supplementary Article/Supplementary Info: with attachment material
• Name: SW 99 90 3674
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Bearing Type: Tapered Roller Bearing
• Fitting Position: Rear Axle Left, Rear Axle Right
• Outer Diameter 1 [mm]: 40
• Outer Diameter 2 [mm]: 50
• Width 1 [mm]: 14
• Width 2 [mm]: 14
• Inner Diameter 1 [mm]: 17.5
• Weight [kg]: 0.254
• Inner Diameter 2 [mm]: 29
• Supplementary Article/Supplementary Info: with attachment material
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Bearing Type: Tapered Roller Bearing
• Fitting Position: Rear Axle Left, Rear Axle Right
• Outer Diameter 1 [mm]: 40
• Outer Diameter 2 [mm]: 50
• Width 1 [mm]: 14
• Width 2 [mm]: 14
• Inner Diameter 1 [mm]: 17.5
• Inner Diameter 2 [mm]: 29
• Weight [kg]: 0.234
• Supplementary Article/Info 2: with shaft seal
• Name: SW 30 85 0001
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Width [mm]: 13.8
• Inner Diameter [mm]: 17.5
• Outer Diameter [mm]: 39.9
• Width 1 [mm]: 14.2
• Supplementary Article/Info 2: with fastening material
• Outer Diameter 1 [mm]: 50.3
• Inner Diameter 1 [mm]: 29
• Manufacturer: OPTIMAL

• Fitting Position: Rear Axle Left, Rear Axle Right
• Trim Level: FRRE LR+RE
• Inner Diameter [mm]: 13
• Number of bores: 29
• Number of mounting bores: 17
• Width [mm]: 14
• Width 2 [mm]: 39
• Diameter 2 [mm]: 1
• Name: DA KWD1019
• Manufacturer: DAYCO

• Fitting Position: Right, Rear Axle
• Inner Diameter 1 [mm]: 17
• Outer Diameter 2 [mm]: 50
• Outer Diameter 1 [mm]: 39
• Width 1 [mm]: 13
• Width 2 [mm]: 14
• Manufacturer: SNR

• Required quantity: 2
• Supplementary Article/Info 2: with grease cap, with seal ring
• Outer Diameter 1 [mm]: 50
• Inner Diameter 1 [mm]: 29
• Outer Diameter 2 [mm]: 40
• Inner Diameter 2 [mm]: 19
• Fitting Position: Rear Axle Left, Rear Axle Right
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle
• Width [mm]: 37
• Inner Diameter [mm]: 33.8
• Outer Diameter [mm]: 62
• Net weight [kg]: 0.53
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: NK

• Fitting Position: Front Axle
• Width [mm]: 37
• Inner Diameter [mm]: 34
• Outer Diameter [mm]: 62
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Rear Axle Left, Rear Axle Right
• Width 1 [mm]: 14.605
• Width 2 [mm]: 14.732
• Outer Diameter 1 [mm]: 39.878
• Outer Diameter 2 [mm]: 50.292
• Inner Diameter 1 [mm]: 17.462
• Inner Diameter 2 [mm]: 29
• Manufacturer: GSP

• Fitting Position: Front Axle Left, Front Axle Right
• Width 1 [mm]: 37
• Outer Diameter 1 [mm]: 62
• Inner Diameter 1 [mm]: 34
• Manufacturer: GSP

• Fitting Position: Front Axle
• Width [mm]: 37
• Inner Diameter [mm]: 34
• Outer Diameter [mm]: 62
• Supplementary Article/Info 2: with retaining ring, with nut
• Manufacturer: OPTIMAL

• Fitting Position: Front Axle
• Width [mm]: 37
• Inner Diameter [mm]: 34
• Outer Diameter [mm]: 62
• Supplementary Article/Info 2: with retaining ring, with screw, with nut
• Manufacturer: OPTIMAL

• Fitting Position: Front Axle
• Width [mm]: 37
• Inner Diameter [mm]: 34
• Outer Diameter [mm]: 62
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: MAX

• Fitting Position: Rear Axle
• Required quantity: 2
• Width 1 [mm]: 13.9
• Width 2 [mm]: 14.2
• Outer Diameter 1 [mm]: 39.9
• Outer Diameter 2 [mm]: 50.3
• Inner Diameter 1 [mm]: 17.5
• Inner Diameter 2 [mm]: 29
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: SKF

• Fitting Position: Front Axle Left, Front Axle Right
• Inner Diameter 1 [mm]: 34
• Outer Diameter 1 [mm]: 62
• Weight [kg]: 0.62
• Width 1 [mm]: 37
• Manufacturer: A.B.S.

• Fitting Position: Front Axle
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Inner Diameter [mm]: 34
• Outer Diameter [mm]: 62
• Width [mm]: 37
• SVHC: No SVHC present!
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: FAG

• Fitting Position: Front Axle
• Outer Diameter [mm]: 62
• Inner Diameter [mm]: 34
• Width [mm]: 37
• Manufacturer: METZGER

• Fitting Position: Front Axle Left, Front Axle Right
• Trim Level: FRONT LR+FR
• Number of bores: 34
• Width [mm]: 37
• Diameter 2 [mm]: 1
• Name: DA KWD1374
• Manufacturer: DAYCO

• Fitting Position: Front Axle
• Required quantity: 2
• Width [mm]: 37
• Inner Diameter [mm]: 34
• Outer Diameter [mm]: 62
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: SKF

• Fitting Position: Front Axle
• Supplementary Article/Supplementary Info: with attachment material
• Inner Diameter [mm]: 34
• Outer Diameter [mm]: 62
• Height [mm]: 37
• Bearing Type: Ball Bearing
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: MEY

General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.