• Construction Year to: 10.1993
• Fitting Position: at brake caliper, Rear Axle
• Length [mm]: 161
• Manufacturer: JP GROUP
• Lisainfo: Brake hose, front/rear
• Additional information: Brake hose, front/rear

• Construction Year to: 10.1993
• Fitting Position: Rear Axle Left, Rear Axle Right
• Length [mm]: 200
• Brake Type: Drum Brake
• Manufacturer: JP GROUP
• Lisainfo: Brake hose, rear, 200 mm, for drum brakes
• Additional information: Brake hose, rear, 200 mm, for drum brakes

• Length [mm]: 330
• Fitting Position: Front Axle
• Lisainfo: Brake hose, front
• Additional information: Brake hose, front

• Fitting Position: Front Axle, Rear Axle
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk, kuvatakse 1tk hind
• Additional information: PAKENDIS 10 tk, kuvatakse 1tk hind

• Fitting Position: Rear Axle, Front Axle
• Weight [kg]: 0.009
• Name: KINNITUS,PIDURIVOOLIK
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle, Front Axle
• Weight [kg]: 0.009
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle, Rear Axle
• Block Separation:
• Material: Spring Steel
• for OE number: 4D0 611 715B, 955 355 325 00
• Name: KINNITUS,PIDURIVOOLIK
• Manufacturer: HAN
• Lisainfo: 108 718 HP
• Additional information: 108 718 HP

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Rear Axle, Front Axle
• Weight [kg]: 0.015
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 10.1993
• Fitting Position: Rear Axle
• Length [mm]: 160
• Thread Size: M10x1
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Rear Axle
• Length [mm]: 160
• Thread Size: M10x1
• Manufacturer: DELLO AUTOMEGA

• Construction Year to: 10.1993
• Fitting Position: at brake caliper, Rear Axle, Rear Axle Left
• Length [mm]: 195
• Internal Thread [mm]: M10x1
• External Thread [mm]: M10x1
• Required quantity: 2
• Name: PIDURIVOOLIK
• Manufacturer: MAX
• Lisainfo: 52-0040
• Additional information: 52-0040

• Fitting Position: Rear Axle Left, Rear Axle Right
• Construction Year from: 10.1993
• Braking System: for vehicles with drum brakes on the rear axle
• Length [mm]: 160
• Manufacturer: JP GROUP
• Lisainfo: Brake Hose
• Additional information: Brake Hose

• Construction Year to: 10.1993
• Fitting Position: at brake caliper, Rear Axle
• Length [mm]: 195
• Internal Thread [mm]: M10x1 [mm]
• External Thread [mm]: M10x1 [mm]
• Required quantity: 2
• Name: PIDURIVOOLIK
• Manufacturer: MAX

• Fitting Position: Rear Axle
• Length [mm]: 185
• Internal Thread 1 [mm]: M10x1
• Internal Thread 2 [mm]: M10x1
• Required quantity: 2
• Name: PIDURIVOOLIK
• Manufacturer: MAX

• Fitting Position: Rear Axle Left, outer
• Braking System: for vehicles with disc brakes on the rear axle
• Length [mm]: 155
• Thread Size 1: M10x1
• Thread Type: with internal thread, with external thread
• Thread Size 2: M10x1
• Manufacturer: QUICK BRAKE

• Construction Year to: 12.1989
• Fitting Position: Front Axle
• Length [mm]: 340
• Internal Thread [mm]: M10x1
• External Thread [mm]: M10x1
• Required quantity: 2
• Name: PIDURIVOOLIK
• Manufacturer: MAX

• Construction Year from: 01.1990
• Fitting Position: Front Axle
• Length [mm]: 360
• Internal Thread 1 [mm]: M10x1
• Internal Thread 2 [mm]: M10x1
• Required quantity: 2
• Name: PIDURIVOOLIK
• Manufacturer: MAX

• Fitting Position: Rear Axle Left, inner
• Construction Year from: 10.1993
• Length [mm]: 164
• Thread Size 1: M10x1
• Thread Size 2: M10x1
• Thread Type: with internal thread
• Manufacturer: QUICK BRAKE

• Fitting Position: Rear Axle, inner
• Length [mm]: 185
• Net weight [kg]: 0.06
• Name: PIDURIVOOLIK
• Manufacturer: NK

• Construction Year to: 07.1993
• Fitting Position: Rear
• Length [mm]: 160
• Internal Thread [mm]: M10x1
• Weight [kg]: 0.07
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY

• Fitting Position: Rear Axle Left, Rear Axle Right
• Braking System: for vehicles with drum brakes on the rear axle
• Construction Year from: 10.1993
• Internal Thread 1 [mm]: M 10 x 1,0
• Internal Thread 2 [mm]: M 10 x 1,0
• Length [mm]: 164
• Observe system fill quantity:
• Manufacturer: TOPRAN

Material: Rubber with fabric lining, EPDM (ethylene propylene diene Monomer (M-class) rubber) General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle
• Length [mm]: 350
• Thread Size: M10x1
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Front Axle Right, Front Axle Left
• Internal Thread 1 [mm]: M 10 x 1,0
• Internal Thread 2 [mm]: M 10 x 1,0
• Length [mm]: 350
• Manufacturer: TOPRAN

Material: Rubber with fabric lining, EPDM (ethylene propylene diene Monomer (M-class) rubber) General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Rear Axle Left, inner
• Construction Year to: 09.1993
• Length [mm]: 182
• Thread Size 1: M10x1
• Thread Size 2: M10x1
• Thread Type: with internal thread
• Manufacturer: QUICK BRAKE

• Fitting Position: Rear Axle, outer
• Length [mm]: 185
• Net weight [kg]: 0.06
• Name: PIDURIVOOLIK
• Manufacturer: NK

• Construction Year to: 07.1993
• Fitting Position: Front Axle both sides
• Length [mm]: 360
• Internal Thread [mm]: M10x1
• Weight [kg]: 0.1
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY

• Fitting Position: Rear Axle
• Length [mm]: 160
• Internal Thread [mm]: M10x1
• External Thread [mm]: M10x1
• Name: HE 8AH355460101
• Manufacturer: HELLA PAGID

• Fitting Position: Front Axle
• Thread Size 1: F10x1
• Thread Size 2: F10x1
• Overall Length [mm]: 363
• Name: PIDURIVOOLIK
• Manufacturer: TRI
• Lisainfo: VW PASSAT
• Additional information: VW PASSAT

• Fitting Position: outer, Rear Axle, Left, Right
• Length [mm]: 185
• Thread Size 1: F10X1
• Thread Size 2: M10X1
• Manufacturer: BREMBO
• Name: BR T 85 017

• Fitting Position: Rear Axle, inner
• Thread Size 1: F10x1
• Thread Size 2: F10x1
• Overall Length [mm]: 187
• Name: PIDURIVOOLIK
• Manufacturer: TRI
• Lisainfo: AUDI, VW
• Additional information: AUDI, VW

• Fitting Position: Rear Axle, Rear
• Internal Thread 2 [mm]: M 10x1
• Length [mm]: 160
• Spanner Size: 14/14
• Internal Thread 1 [mm]: M 10x1
• Weight [kg]: 0.059
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle, at master cylinder
• Construction Year to: 12.1996
• for OE number: 171 611 775
• Thread Size 1: M10x1 Int SF
• Thread Size 2: M10x1 Int SF
• Hose Length [mm]: 158
• Length [mm]: 203
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: Brake hose
• Quality class: PJ

Lisainfo: "Tootja: DELPHI
CORRADO (53I), 08.87
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle, at brake caliper
• Thread Size 1: F10x1
• Thread Size 2: M10x1
• Overall Length [mm]: 192
• Name: PIDURIVOOLIK
• Manufacturer: TRI
• Lisainfo: AUDI, SEAT, VW
• Additional information: AUDI, SEAT, VW

• Fitting Position: Rear Axle, Left, Right
• Length [mm]: 210, 180
• Thread Size 1: F10X1
• Thread Size 2: F10X1
• Manufacturer: BREMBO
• Name: BR T 85 016

• Fitting Position: Front Axle
• Length [mm]: 360
• Net weight [kg]: 0.08
• Name: PIDURIVOOLIK
• Manufacturer: NK

• Fitting Position: Rear Axle, Left, Right
• Length [mm]: 210
• Thread Size 1: F10X1
• Thread Size 2: F10X1
• Manufacturer: BREMBO
• Name: BR T 85 018

• Construction Year from: 01.1990
• Fitting Position: Rear Axle
• Length [mm]: 180
• Internal Thread Size: M10 x 1
• Weight [kg]: 0.062
• Name: PIDURIVOOLIK
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle Left, Rear Axle Right, at brake caliper
• Length [mm]: 160
• Thread Size 1: M10 x 1
• Thread Size 2: F10 x 1
• Manufacturer: METZGER

• Fitting Position: Rear Axle, at brake caliper
• Construction Year to: 12.1996
• for OE number: 893 611 775A
• Thread Size 1: M10x1 Int SF
• Thread Size 2: M10x1
• Hose Length [mm]: 164
• Length [mm]: 161
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: Brake hose
• Quality class: PJ

Lisainfo: "Tootja: DELPHI
GOLF III (1H1), 08.9
(kvaliteediklass: PJ)" Additional information: "Tootja: DELPHI
GOLF III (1H1), 08.9
(kvaliteediklass: PJ)"

• Required quantity: 2
• Fitting Position: Rear Axle, both sides
• Braking System: for vehicles with disc brakes on the rear axle
• Length [mm]: 185
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Rear Axle
• Braking System: for vehicles with disc brakes on the rear axle
• Length [mm]: 190
• Internal Thread Size: M10 x 1
• External Thread Size: M10 x 1
• Spanner Size: 14
• Weight [kg]: 0.06
• Name: PIDURIVOOLIK
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Length [mm]: 160
• Internal Thread [mm]: M10x1
• Name: HE 8AH355460081
• Manufacturer: HELLA PAGID

• Fitting Position: Rear Axle
• Length [mm]: 160
• Internal Thread 1 [mm]: M10x1
• Internal Thread 2 [mm]: M10x1
• Required quantity: 2
• Name: PIDURIVOOLIK
• Manufacturer: MEY

• Fitting Position: Front Axle Left
• Length [mm]: 340
• Thread Size 1: M10x1
• Thread Size 2: M10x1
• Thread Type: with internal thread
• Manufacturer: QUICK BRAKE

• Construction Year from: 01.1990
• Length [mm]: 370
• Internal Thread Size: M10 x 1
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.088
• Name: SW 99 90 8487
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 01.1990
• Length [mm]: 370
• Internal Thread Size: M10 x 1
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.09
• Name: PIDURIVOOLIK
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Length [mm]: 333
• Manufacturer: CORTECO

• Construction Year to: 10.1993
• Fitting Position: at brake caliper, Rear Axle
• Length [mm]: 195
• Internal Thread [mm]: M10x1
• External Thread [mm]: M10x1
• Required quantity: 2
• Name: PIDURIVOOLIK
• Manufacturer: MEY

• Construction Year to: 12.1989
• Fitting Position: Front Axle
• Length [mm]: 340
• Internal Thread [mm]: M10x1
• External Thread [mm]: M10x1
• Required quantity: 2
• Name: PIDURIVOOLIK
• Manufacturer: MEY

• Fitting Position: Left, Right, Front Axle
• Length [mm]: 360
• Thread Size 1: F10X1
• Thread Size 2: F10X1
• Manufacturer: BREMBO

• Construction Year from: 01.1990
• Fitting Position: Front Axle
• Length [mm]: 360
• Internal Thread 1 [mm]: M10x1
• Internal Thread 2 [mm]: M10x1
• Required quantity: 2
• Name: PIDURIVOOLIK
• Manufacturer: MEY

• Construction Year to: 07.1993
• Fitting Position: Rear Axle, inner
• Length [mm]: 160
• Internal Thread 1 [mm]: M10x1
• Internal Thread 2 [mm]: M10x1
• Manufacturer: BOSCH

• Construction Year to: 07.1993
• Fitting Position: Rear Axle, outer
• Length [mm]: 160
• External Thread 1 [mm]: M10x1
• Internal Thread 2 [mm]: M10x1
• Manufacturer: BOSCH UK£ADY HAMULCOWE

• Fitting Position: Rear Axle, outer, Left, Right
• Length [mm]: 185
• Thread Size 1: M10x1
• Thread Type: Internal Thread, External Thread
• Thread Size 2: M10x1
• Name: PIDURIVOOLIK
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle, inner, Left, Right
• Length [mm]: 185
• Thread Size 1: M10x1
• Thread Type: Internal Thread
• Name: PIDURIVOOLIK
• Manufacturer: TRW
• Quality class: Q

SVHC: No information available, please contact the manufacturer!

• Construction Year to: 07.1993
• Fitting Position: Front Axle
• Length [mm]: 330
• Internal Thread 1 [mm]: M10x1
• Internal Thread 2 [mm]: M10x1
• Manufacturer: BOSCH UK£ADY HAMULCOWE

• Construction Year to: 10.1993
• Required quantity: 2
• Fitting Position: Rear Axle
• Length [mm]: 164
• Internal Thread 1 [mm]: M10x1
• Internal Thread 2 [mm]: M10x1
• MAPP code available:
• Spanner size 1 [mm]: 14
• Name: Pidurivoolik
• Manufacturer: ATE

• Construction Year to: 10.1993
• Fitting Position: at brake caliper, Rear Axle
• Required quantity: 2
• Length [mm]: 161
• External Thread [mm]: M10x1
• Internal Thread [mm]: M10x1
• MAPP code available:
• Spanner size 1 [mm]: 14
• Name: Pidurivoolik
• Manufacturer: ATE