Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Thread Size: M10x1,
0 - Colour: black
- Number of connectors: 1
- Weight [kg]: 0.019
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: PG
- Diameter [mm]: 26
- Length [mm]: 35
- Weight [kg]: 0.02
- Supplementary Article/Info 2: with seal ring
- for OE number: 251 919 501 D
- Housing Colour: black
- Supplementary Article/Supplementary Info: with seal
- Number of pins: 2
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Number of pins: 3
- Socket colour: green
-
Fabrication Number: ESS-
AU- 000 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Catalytic Converter Type: for vehicles with catalytic converter
- Length [mm]: 37
- Weight [kg]: 0.02
- Supplementary Article/Info 2: with seal ring
- for OE number: 025 906 041 A
- Supplementary Article/Supplementary Info: with seal
- Colour Coding: blue
- Number of pins: 2
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: PG
- Name: EP 1.830.086
- Manufacturer: EPS
- Construction Year from: 01.1990
- Construction Year to: 06.1993
- Engine Code: PG
- Number of pins: 3
- Connector Shape: rectangular
- Cable Length [mm]: 800
- Manufacturer: MEAT&DORIA
- Engine Code: PG
- Cable Length [mm]: 520
- Number of pins: 3
- Weight [kg]: 0.08
- Manufacturer: ERA
Manufacturer: MAGNETI MARELLI
- Construction Year to: 07.1993
- Manufacturer: BOSCH
-
Lambda Sensor: Regulating Probe,
Lambda Sensor - Construction Year from: 09.1989
- Construction Year to: 10.1993
- Voltage [V]: 12
- Number of circuits: 3
- Weight [kg]: 0.08
- Operating Mode: Electric
- Warranty: 3 years warranty
- Name: CE 09SKV903
- Manufacturer: ESEN SKV
- Construction Year to: 07.1993
-
Lambda Sensor: Regulating Probe,
Planar probe - Fitting Position: before catalytic converter
- Number of circuits: 3
- Connector/Clamp: Connector may need adjustment
- Name: LAMBDA ANDUR
- Manufacturer: MAX
-
Lambda Sensor: Regulating Probe,
Lambda Sensor - Construction Year from: 09.1989
- Construction Year to: 10.1993
-
Exhaust System: for pre-
catalytic converter - Voltage [V]: 12
- Number of circuits: 4
- Weight [kg]: 0.09
- Resistor [Ohm]: 13
- Operating Mode: Electric
- Warranty: 3 years warranty
- Name: CE 09SKV913
- Manufacturer: ESEN SKV
- Construction Year from: 09.1989
- Construction Year to: 10.1993
- Transmission Type: Manual Transmission
-
Exhaust System: for pre-
catalytic converter - Quality: OE
- Manufacturer Restriction: DENSO
- Thread Size: M18x1.5
- Cable Length [mm]: 750
- Number of pins: 3
- Weight [g]: 95
- Gross Weight [g]: 144
- Manufacturer: DENSO
-
Name: DN DOX-
0116 -
Lisainfo: DOX-
0116 DENSO -
Additional information: DOX-
0116 DENSO
Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor
- Construction Year from: 09.1989
- Construction Year to: 10.1993
- Transmission Type: Manual Transmission
- Catalytic Converter Type: for vehicles with catalytic converter
-
Exhaust System: for pre-
catalytic converter - Quality: OE
- Thread Size: M18x1.5
- Cable Length [mm]: 750
- Number of pins: 3
- Weight [g]: 95
- Gross Weight [g]: 144
- Manufacturer: DENSO
- Name: Lambda sensor
- Quality class: Q
Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor
Additional information: "Tootja: DENSO
ESCORT IV KOMBI (AWF
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
ESCORT IV KOMBI (AWF
(kvaliteediklass: Q)"
- Construction Year to: 07.1993
- Lambda Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Catalytic Converter Type: for vehicles with catalytic converter
- Number of circuits: 3
-
Recommended change interval [km]: 160,
000 - Connector/Clamp: Connector may need adjustment
- Name: LAMBDA ANDUR
- Manufacturer: BOS
- Construction Year to: 07.1993
- Lambda Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Catalytic Converter Type: for vehicles without catalytic convertor
- Number of circuits: 3
-
Recommended change interval [km]: 160,
000 - Connector/Clamp: Connector may need adjustment
- Name: LAMBDA ANDUR
- Manufacturer: BOS
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks