Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Material: Plastic
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Thickness [mm]: 3.5
- Inner Diameter [mm]: 19.5
-
Material: NBR
(nitrile butadiene rubber) - Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
-
Vehicle Identification Number (VIN) to: 6N-
YY050 000 - Diameter [mm]: 20
- Manufacturer: DELLO AUTOMEGA
-
Name: SULGURKORK,
JAHUTUSVEDELIKUFLANTS - Manufacturer: MAX
- Material: Plastic
- Name: STOPPER
- Manufacturer: MAX
- Thickness [mm]: 3.5
- Inner Diameter [mm]: 19.5
-
Material: NBR
(nitrile butadiene rubber) - Weight [kg]: 0.003
-
Name: TIHEND,
JAHUTUSVEDEDELIKUFLANTS - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Material: Plastic
-
Supplementary Article/Supplementary Info: with spring,
with seal - Full Set:
- for OE number: 357198140S
- Manufacturer: DELLO AUTOMEGA
-
Supplementary Article/Supplementary Info: with spring,
with seal - Weight [kg]: 0.063
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Material: Plastic
- Weight [kg]: 0.015
-
Name: KINNITUSVEDRU,
JAHUTUSVEDELIKUFLANTS- SULGURKORK - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Weight [kg]: 0.055
- Diameter 1 [mm]: 32
- Manufacturer: 3RG
- Number of flange connections: 2
- Manufacturer: DELLO AUTOMEGA
- Thickness [mm]: 3.15
- Inner Diameter [mm]: 36
- Material: Rubber
- Weight [kg]: 0.003
-
Name: TIHEND,
JAHUTUSVEDEDELIKUFLANTS - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Material: Plastic
- Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: MAX
- Weight [kg]: 0.038
-
Name: SULGURKORK,
JAHUTUSVEDELIKUFLANTS - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Supplementary Article/Supplementary Info: with seal
- Material: Plastic
-
Supplementary Article/Info 2: with bolts/
screws - Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Supplementary Article/Info 2: with bolts/
screws - Supplementary Article/Supplementary Info: with seal
- Material: Plastic
- General Information: pipe union
- Manufacturer: VIKA
- for OE number: 037121145
- Material: Plastic
- Supplementary Article/Supplementary Info: with seal
- Weight [g]: 45
- Supplementary Article/Info 2: without thermostat
- Name: IM 90186
- Manufacturer: ORIGINAL IMPERIUM
- for OE number: 032121121J
- Material: Plastic
-
Supplementary Article/Supplementary Info: without gasket/
seal - Weight [g]: 63
- Supplementary Article/Info 2: without thermostat
- Name: IM 90242
- Manufacturer: ORIGINAL IMPERIUM
- Required quantity: 1
-
Supplementary Article/Supplementary Info: without gasket/
seal - Weight [g]: 55
- Supplementary Article/Info 2: without thermostat
- Name: IM 90353
- Manufacturer: ORIGINAL IMPERIUM
- Supplementary Article/Supplementary Info: with seal
-
Supplementary Article/Info 2: with bolts/
screws - Fitting Position: Front Axle
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Housing Type: Synthetic Material Housing
- Supplementary Article/Supplementary Info: with seal
- Manufacturer: CALORSTAT BY VERNET
- Number of flange connections: 1
- Number of mounting bores: 2
-
Name: KRàCIEC UKADU CHODZENIA VW POLO 95-
- Manufacturer: NRF
- Weight [kg]: 0.121
- Material: Plastic
- Supplementary Article/Supplementary Info: with seal
- Quantity Unit: Set
- Weight [g]: 121
- Manufacturer: METALCAUCHO
- Supplementary Article/Supplementary Info: with seal
- Material: Plastic
- Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: MEY
- General Information: pipe union
- Manufacturer: VIKA
- General Information: pipe union
- Manufacturer: VIKA
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks