• Construction Year to: 09.1987
• Engine Code: ACM + HZ
• Filter type: In-Line Filter
• Height [mm]: 142
• Outer Diameter [mm]: 32
• Outer Diameter 1 [mm]: 37
• Lisainfo: Fuel filter
• Additional information: Fuel filter

• Construction Year from: 10.1987
• Filter type: In-Line Filter
• Height [mm]: 164
• Outer Diameter [mm]: 74
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• Outer Diameter 1 [mm]: 81
• SVHC: No SVHC present!
• Name: KšTUSEFILTER
• Manufacturer: MAN
• Lisainfo: WK 830/7 MAN
• Additional information: WK 830/7 MAN

• Construction Year to: 08.1990
• Fitting Position: Front Axle
• Brake System: Kelsey-Hayes
• Height [mm]: 51.3
• Width [mm]: 138
• Thickness [mm]: 17.3
• Wear Warning Contact: excl. wear warning contact
• Manufacturer: JP GROUP
• Lisainfo: Brake pad set, front, 17.3 mm
• Additional information: Brake pad set, front, 17.3 mm

• Engine Code: 2G
• Filter type: In-Line Filter
• Length [mm]: 118
• Width [mm]: 48
• Height [mm]: 118
• Outer Diameter [mm]: 48
• for OE number: 191 201 511 A
• Name: Ktusefilter
• Manufacturer: MAX

• Engine Code: 2G/MH
• Quantity per packing unit: 10
• Outer Diameter [mm]: 31.5
• Length [mm]: 140
• Width [mm]: 95
• Height [mm]: 142
• Filter type: Spin-on Filter
• Outer Diameter 1 [mm]: 37
• Weight [kg]: 0.104
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 09.1987
• Filtritüüp: Ühendusfilter
• Välisläbimõõt [mm]: 36
• pikkus üle kõige (mm): 136
• Manufacturer: HENGST FILTER

• Engine Code: 2G
• Filter type: In-Line Filter
• Length [mm]: 118
• Outer Diameter [mm]: 48
• Weight [kg]: 0.02
• Name: KšTUSEFILTER
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 07.1992
• Filter type: In-Line Filter
• Fuel Type: Petrol
• Height [mm]: 125
• Outer Diameter [mm]: 48
• Inlet Ø [mm]: 6
• Outlet Ø [mm]: 6
• Manufacturer: KAMOKA FILTRY PALIWA

• Engine Code: 2G,MH,NU,NZ
• Filter type: In-Line Filter
• Height [mm]: 116
• Outer Diameter [mm]: 51
• Outer Diameter 1 [mm]: 44
• Inlet Ø [mm]: 6
• Outlet Ø [mm]: 6
• Weight [kg]: 0.07
• Manufacturer: VALEO

• Construction Year to: 09.1987
• Filter type: In-Line Filter
• Height [mm]: 118
• Outer Diameter [mm]: 48
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• SVHC: No SVHC present!
• Manufacturer: FILTRON

• Construction Year to: 09.1987
• Filtritüüp: Ühendusfilter
• Pikkus (mm): 97
• Välisläbimõõt [mm]: 49
• Läbimõõt 1/Läbimõõt 2 (mm): IN/OUT: 8
• Manufacturer: JAPKO

• Kõrgus (mm): 119
• Välisläbimõõt [mm]: 53
• Konteineri tüüp: Sahtel
• Filtritüüp: Ühendusfilter
• Sisend-Ø (mm): 6,3
• Väljalase-Ø (mm): 6,3
• pakendi pikkus [cm]: 5,8
• pakendi laius [cm]: 5,8
• pakendi kõrgus [cm]: 11,6
• Name: CH CFF100101
• Manufacturer: CHAMPION

• for OE number: 251201511G
• Engine Code: 2G
• Height [mm]: 142
• Outer Diameter [mm]: 31.5
• Outer Diameter 1 [mm]: 37
• Outlet Ø [mm]: 6.5
• Inlet Ø [mm]: 8.4
• Filter type: Filter Insert
• Manufacturer: SOFIMA

• Engine Code: 2G
• for model code: 86,87, 80
• Construction Year from: 01.1989, 10.1990
• Construction Year to: 08.1990
• Block Separation:
• Filter type: In-Line Filter
• Diameter [mm]: 48
• Height [mm]: 117.5
• Inlet Ø [mm]: 7.2
• Outlet Ø [mm]: 7.2
• Manufacturer: BOSCH
• Name: BS F026403169

• Engine Code: 2G, MH
• Quantity per packing unit: 10
• Filter type: In-Line Filter
• Diameter [mm]: 30
• Height [mm]: 143.5
• Inlet Ø [mm]: 6
• Outlet Ø [mm]: 6.1
• Net Weight [g]: 17
• Packaging width [cm]: 4
• Packaging height [cm]: 4
• Packaging length [cm]: 8
• Manufacturer: KNECHT
• Name: KN KL15OF

• Construction Year to: 09.1987
• Quantity per packing unit: 10
• Filter type: In-Line Filter
• Height [mm]: 142
• Outer Diameter [mm]: 32
• Outlet Ø [mm]: 6
• Outer Diameter 1 [mm]: 37
• Outer Diameter 2 [mm]: 8
• SVHC: No SVHC present!
• Manufacturer: MANN-FILTER

• Engine Code: AAV, NZ
• Fuel Mixture Formation: Petrol Injection
• Outer Diameter 1 [mm]: 75
• Outer Diameter 2 [mm]: 81
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• Height 1 [mm]: 110
• Height 2 [mm]: 158
• Filter type: In-Line Filter
• Manufacturer: DELLO AUTOMEGA

• Construction Year from: 10.1987
• Filter type: In-Line Filter
• Height [mm]: 164
• Outer Diameter [mm]: 74
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• Outer Diameter 1 [mm]: 81
• Name: KšTUSEFILTER
• Manufacturer: MAX

• Construction Year from: 08.1992
• Filter type: In-Line Filter
• Fuel Type: Petrol
• Height [mm]: 157
• Outer Diameter 1 [mm]: 82
• Outer Diameter 2 [mm]: 74
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• Manufacturer: KAMOKA FILTRY PALIWA

• Construction Year from: 10.1987
• Filter type: Spin-on Filter
• Height [mm]: 164
• Outer Diameter 1 [mm]: 74
• Outer Diameter 2 [mm]: 81
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• Manufacturer: JP GROUP
• Lisainfo: Fuel filter
• Additional information: Fuel filter

• Filter type: In-Line Filter
• Height [mm]: 160
• Outer Diameter [mm]: 80
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• Name: KšTUSEFILTER
• Manufacturer: ALC

• Construction Year from: 10.1987
• Välisläbimõõt 1 [mm]: 80
• Siseläbimõõt 1 [mm]: 8
• Siseläbimõõt 2 (mm): 8
• Kõrgus (mm): 163
• Filtritüüp: Ühendusfilter
• Manufacturer: DENCKERMANN FILTRY

• Construction Year from: 10.1987
• Kõrgus (mm): 156
• Välisläbimõõt [mm]: 81,5
• Sisend-Ø (mm): 8
• Väljalase-Ø (mm): 8
• Filtritüüp: Ühendusfilter
• Name: CFD DFF0100
• Manufacturer: DACO

• Engine Code: AAV, NZ
• Filter type: In-Line Filter
• Length [mm]: 159
• Housing material: Metal
• Outer Diameter [mm]: 81
• Weight [kg]: 0.25
• Name: KšTUSEFILTER
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: AAV, NZ
• Filter type: In-Line Filter
• Length [mm]: 159
• Housing material: Metal
• Outer Diameter [mm]: 81
• Weight [kg]: 0.25
• Manufacturer: BLUE PRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Driven Units: Camshaft
• Trim Level: >200 000
• Number of Teeth: 108
• Width [mm]: 19
• Name: HAMMASRIHM
• Manufacturer: DAY

• Construction Year from: 10.1987
• Fuel Type: Petrol
• Outlet Ø [mm]: 8
• Outer Diameter 1 [mm]: 81
• Height [mm]: 163.5
• Outer Diameter [mm]: 74
• Inlet Ø [mm]: 8
• Weight [kg]: 0.323
• Filter type: In-Line Filter
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Driven Units: Camshaft
• Trim Level: CR
• Number of Teeth: 128
• Width [mm]: 19
• Name: HAMMASRIHM
• Manufacturer: DAY
• Lisainfo: 94303 DAY
• Additional information: 94303 DAY

• Engine Code: MH, NZ, 2G
• for model code: 86,87
• Construction Year to: 08.1990
• Number of Teeth: 108
• Length [mm]: 1,029
• Width [mm]: 19
• Tooth Pitch [mm]: 9.525
• Name: HAMMASRIHM
• Manufacturer: BOS

• Construction Year from: 10.1990
• Engine Code: NZ,AAV
• Filter type: In-Line Filter
• Height [mm]: 165
• Outer Diameter [mm]: 83
• Outer Diameter 1 [mm]: 75
• Inlet Ø [mm]: 9
• Outlet Ø [mm]: 9
• Weight [kg]: 0.23
• Manufacturer: VALEO
• Name: VA 587004

• Engine Code: NZ, AAV
• Kõrgus (mm): 159
• Välisläbimõõt [mm]: 81
• Konteineri tüüp: Sahtel
• Filtritüüp: Ühendusfilter
• Sisend-Ø (mm): 8
• Väljalase-Ø (mm): 8
• pakendi pikkus [cm]: 8,5
• pakendi laius [cm]: 8,5
• pakendi kõrgus [cm]: 17,3
• Name: CH CFF100206
• Manufacturer: CHAMPION

• Sisend-Ø (mm): 8
• Väljalase-Ø (mm): 8
• Läbimõõt 1 (mm): 75
• Läbimõõt 2 (mm): 8
• Läbimõõt [mm]: 81
• Kõrgus 1 (mm): 110
• Kõrgus (mm): 158
• Kütusesüsteemi seadmed: Bensiini sissepritse
• Kütuseliik: Bensiin
• Filtritüüp: Ühendusfilter
• Üldine informatsioon: fuel filter
• Manufacturer: BORSEHUNG

• Construction Year from: 10.1987
• Filtritüüp: Keeratav filter
• Kõrgus (mm): 158
• Siseläbimõõt [mm]: 8
• Välisläbimõõt [mm]: 81
• Quality class: PJ
• Name: Fuel filter

• Construction Year from: 10.1987
• Filter type: In-Line Filter
• Height [mm]: 156
• Outer Diameter [mm]: 81.5
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• SVHC: No SVHC present!
• Manufacturer: FILTRON

• Engine Code: NZ, 2G, AAV
• for model code: 80
• Construction Year from: 10.1990
• Number of Teeth: 128
• Length [mm]: 1,024
• Width [mm]: 19
• Tooth Pitch [mm]: 8
• Name: HAMMASRIHM
• Manufacturer: BOS

• Construction Year from: 08.1992
• Engine Code: MH, NZ, 2G, AAV
• Height [mm]: 156
• Fuel Type: Petrol
• Filter type: In-Line Filter
• External Thread [mm]: 8
• Manufacturer: MAGNETI MARELLI
• Name: MM 71762427

• Construction Year from: 10.1987
• Filtritüüp: Filtrer
• Läbimõõt 1 (mm): 74
• Läbimõõt 2 (mm): 8
• Läbimõõt 3 (mm): 8
• Kõrgus (mm): 154
• Name: CL MBNA 957
• Manufacturer: CLEAN FILTERS

• Driven Units: Camshaft
• Engine Number to: NZ200000, 2G262739, HZ786022, 3F008526, AAU015867
• Block Separation:
• Engine Code: MH
• Number of Teeth: 108
• Packaging length [cm]: 25.5
• Packaging width [cm]: 16
• Packaging height [cm]: 3
• Weight [kg]: 0.13
• Width [mm]: 19
• Tooth Pitch [mm]: 9.525
• Name: HAMMASRIHM
• Manufacturer: CON

• Driven Units: Camshaft
• Engine Code: MH, NZ
• Block Separation:
• Engine Number to: NZ 200000
• Article number of the recommended special tool: STT-1
• Belt Material: Polychloroprene (Neoprene)
• Number of Teeth: 108
• Width [mm]: 19
• Tooth Pitch [mm]: 9.525
• Length [mm]: 1,029
• Name: Hammasrihm
• Manufacturer: GAT

• Fitting Position: Rear Axle
• Piduritrumli läbimõõt seespool [mm]: 180
• Laius (mm): 31
• Piirangutega toode/piirangu info: koos kangiga
• Kontrolltähistus: ECE R90
• Manufacturer: ABAKUS DEPO/LORO

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Filtritüüp: Ühendusfilter
• Kütusesüsteemi seadmed: Bensiini sissepritse
• Läbimõõt [mm]: 81
• Kõrgus (mm): 158
• Kõrgus 1 (mm): 110
• Läbimõõt 1 (mm): 75
• Läbimõõt 2 (mm): 8
• Sisend-Ø (mm): 8
• Väljalase-Ø (mm): 8
• Üldine informatsioon: fuel filter; gasoline
• Manufacturer: VIKA

• Construction Year from: 10.1987
• Filtritüüp: Ühendusfilter
• Välisläbimõõt [mm]: 82
• pikkus üle kõige (mm): 157
• Manufacturer: HENGST FILTER

• Height [mm]: 156
• Outer Diameter [mm]: 74
• Outer Diameter 1 [mm]: 81
• Outlet Ø [mm]: 8
• Inlet Ø [mm]: 8
• Filter type: Filter Insert
• Manufacturer: SOFIMA

• Fitting Position: Rear Axle
• Diameter [mm]: 180
• Width [mm]: 31
• Net weight [kg]: 1.11
• Name: PIDURIKLOTSIDE KOMPLEKT
• Manufacturer: NK

• Construction Year from: 10.1987
• Filter type: Spin-on Filter
• Outer Diameter [mm]: 81
• Inner Diameter [mm]: 8
• Height [mm]: 158
• Name: Fuel filter
• Quality class: Q

Lisainfo: "Tootja: COOPERSFIAAM FILTERS
ULYSSE (220), 06.94-
(kvaliteediklass: PJ)" Additional information: "Tootja: COOPERSFIAAM FILTERS
ULYSSE (220), 06.94-
(kvaliteediklass: PJ)"

• Diameter [mm]: 80
• Filter type: In-Line Filter
• Material: Steel
• Height [mm]: 162
• Name: KšTUSEFILTER
• Manufacturer: MEY

• Engine Code: AAV, NZ
• Filter type: In-Line Filter
• Diameter [mm]: 75
• Height [mm]: 162.5
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• Packaging height [cm]: 16.4
• Net Weight [g]: 231
• Packaging length [cm]: 8.2
• Packaging width [cm]: 8.2
• Manufacturer: KNECHT
• Name: KN KL2

• Engine Code: NZ, 2G
• Engine Number to: 200 000, 262 739
• Block Separation:
• Width [mm]: 19
• Number of Teeth: 108
• Belts: with trapezoidal tooth profile
• Weight [kg]: 0.09
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Braking/Drive Dynamics: for vehicles without ABS
• for PR number: 1KA
• Quantity per packing unit: 4
• Width [mm]: 31
• Brake System: ATE
• Inner brake drum diameter [mm]: 180
• Manufacturer: LPR
• Name: LPR 00140

• Läbimõõt [mm]: 180
• Laius (mm): 31
• Installatsiooni pool: Tagasild
• Pidurisüsteem: VAG
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Rear Axle
• Braking/Drive Dynamics: for vehicles with ABS
• Quantity per packing unit: 4
• Width [mm]: 31
• Brake System: ATE
• Supplementary Article/Info 2: with handbrake lever
• Inner brake drum diameter [mm]: 180
• Manufacturer: BREMBO
• Name: BR S 85 507

• Fitting Position: Front Axle
• Construction Year to: 08.1990
• Alternatively:
• Block Separation:
• Construction Year from: 09.1990
• Laius (mm): 198
• Kõrgus (mm): 50
• Jämedus/Tugevus (mm): 17,3
• Kulumishoiatus kontakt: ilma kulumihoiatuseta
• Pidurisüsteem: Kelsey-Hayes
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: QUARO
• Lisainfo: QP3968
• Additional information: QP3968

• Installatsiooni pool: Tagasild
• Laius (mm): 31
• Pidurisüsteem: Ate/Teves
• Piduritrumli läbimõõt seespool [mm]: 180
• Kaal (kg): 1,03
• Manufacturer: TOMEX BRAKES

• Driven Units: Camshaft
• Engine Number from: NZ200001, 2G262740, HZ786023, 3F008527, AAU015868
• Block Separation:
• Engine Code: AAV
• Number of Teeth: 128
• Packaging length [cm]: 25.5
• Packaging width [cm]: 16
• Packaging height [cm]: 3
• Weight [kg]: 0.15
• Width [mm]: 19
• Tooth Pitch [mm]: 8
• Name: HAMMASRIHM
• Manufacturer: CON
• Additional information: CT629
• Lisainfo: CT629

• Driven Units: Camshaft
• Engine Code: NZ
• Engine Number from: NZ 200001
• Article number of the recommended special tool: STT-1
• Belt Material: Polychloroprene (Neoprene)
• Number of Teeth: 128
• Width [mm]: 19
• Tooth Pitch [mm]: 8
• Length [mm]: 1,024
• Name: Hammasrihm
• Manufacturer: GAT

• Construction Year to: 07.1992
• Vehicle Identification Number (VIN) from: F-127904
• Fitting Position: Front Axle
• Quantity per packing unit: 4
• Brake System: KELSEY-HAYES
• Height [mm]: 51.2
• Thickness [mm]: 17
• Width [mm]: 137.8
• Manufacturer: LPR

• Fitting Position: Rear Axle
• Piduritrumli läbimõõt seespool [mm]: 180
• Laius (mm): 31
• Kaal (kg): 1,14
• Pidurisüsteem: VAG
• Montaažiinfo: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• for brake disc thickness [mm]: 10
• for brake disc diameter [mm]: 239
• Length [mm]: 61.7
• Width [mm]: 56.5
• Fitting Position: Front Axle
• Thickness 1 [mm]: 15.3
• Wear Warning Contact: excl. wear warning contact
• Weight [kg]: 0.7
• Manufacturer: FEBI HAMULCE

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Quantity per packing unit: 4
• Test Mark: E1 90R-01881/514
• WVA Number: 20889
• Brake System: Kelsey Hayes
• Supplementary Article/Info 2: without anti-squeak plate
• Supplementary Article/Supplementary Info: without accessories
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: not prepared for wear indicator
• Width 1 [mm]: 137.7
• Width 2 [mm]: 137.7
• Height 1 [mm]: 50.1
• Height 2 [mm]: 50.1
• Thickness 1 [mm]: 17
• Thickness 2 [mm]: 17
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LP505

• Engine Code: AAV, MH, NZ
• Diameter [mm]: 82
• Material: Plastic
• Filter type: In-Line Filter
• Height [mm]: 157
• Manufacturer: DELPHI

• Fitting Position: Front Axle
• Wear Warning Contact: excl. wear warning contact
• Supplementary Article/Supplementary Info: with accessories
• Brake System: Volkswagen
• Width [mm]: 138
• Height 1 [mm]: 49
• Height 2 [mm]: 51
• Thickness [mm]: 17
• for OE number: 867698151
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Engine Code: NZ, AAV
• for model code: 86,87, 80
• Construction Year to: 08.1990
• Block Separation:
• Construction Year from: 10.1990
• Fuel Mixture Formation: Petrol Injection
• Filter type: In-Line Filter
• Diameter [mm]: 81
• Height [mm]: 161
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• Name: KšTUSEFILTER
• Manufacturer: BOS

• Fitting Position: Rear Axle
• Piduritrumli läbimõõt seespool [mm]: 180
• Laius (mm): 31
• Piirangutega toode/piirangu info: koos kangiga
• Kontrolltähistus: E1 90R-011043/034
• MAPP-code olemas:
• soovitava lisavarustuse artiklinumber: 03.0137-9008.2
• jälgida mõõtu:
• Name: Piduriklotside komplekt
• Manufacturer: ATE

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Brake System: V.A.G.
• Inner brake drum diameter [mm]: 180
• Width [mm]: 31
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LS1276

• Fitting Position: Front Axle
• for PR number: 1LA
• Quantity per packing unit: 4
• Thickness [mm]: 17
• Width [mm]: 137.8
• Height 1 [mm]: 51.2
• Height 2 [mm]: 49
• Brake System: KELSEY-HAYES
• Manufacturer: LPR
• Additional information: 05P591
• Lisainfo: 05P591

• Fitting Position: Rear Axle
• Diameter [mm]: 180
• Width [mm]: 30
• Brake Pad: with lining
• Manufacturer: JP GROUP
• Lisainfo: Brake shoe set, without E-mark, 180x30 mm
• Additional information: Brake shoe set, without E-mark, 180x30 mm

• Installatsiooni pool: Esisild
• Laius (mm): 137,8
• Kõrgus 1 (mm): 48,9
• Kõrgus 2 (mm): 51,3
• Jämedus/Tugevus (mm): 17,3
• Pidurisüsteem: Volkswagen
• Manufacturer: DENCKERMANN ZAWIESZENIE

Kulumishoiatus kontakt: mitte kulumishoiatusnäidiku jaoks ettevalmistatud, ilma kulumihoiatuseta

• Construction Year to: 08.1990
• Installatsiooni pool: Esisild
• Jämedus/Tugevus (mm): 17,3
• Laius (mm): 137,8
• Kõrgus (mm): 51,2
• Piirangutega toode/piirangu info: koos lisadega
• Pidurisüsteem: VAG
• Kaal (kg): 1,1
• Manufacturer: TOMEX BRAKES

• Fitting Position: Front Axle
• Construction Year from: 01.1992
• Quantity per packing unit: 4
• FMSI Code: D206-7126 D280-7209
• Test Mark: E1 90R-01881/513
• WVA Number: 20887 20888
• Brake System: Kelsey Hayes
• Supplementary Article/Info 2: without anti-squeak plate
• Supplementary Article/Supplementary Info: without accessories
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: not prepared for wear indicator
• Width 1 [mm]: 137.7
• Width 2 [mm]: 137.7
• Height 1 [mm]: 48.8
• Height 2 [mm]: 48.2
• Thickness 1 [mm]: 19.5
• Thickness 2 [mm]: 19
• Manufacturer: DELPHI LOCKHEED HAMULCE

• Construction Year to: 08.1990
• Height [mm]: 51.3
• Thickness [mm]: 17.3
• Wear Warning Contact: excl. wear warning contact
• Brake System: Kelsey-Hayes
• Fitting Position: Front Axle
• Width [mm]: 138
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MAX

• Construction Year from: 09.1990
• Block Separation:
• Construction Year to: 08.1990
• Alternatively:
• Installatsiooni pool: Esisild
• Jämedus/Tugevus (mm): 17
• Laius (mm): 137,8
• Kõrgus 1 (mm): 51,2
• Kõrgus 2 (mm): 49
• Piirangutega toode/piirangu info: koos lisadega
• Pidurisüsteem: VAG
• Kaal (kg): 1,15
• Manufacturer: TOMEX BRAKES

• Fitting Position: Rear Axle
• Brake System: ATE
• Supplementary Article/Supplementary Info: with lever
• Width [mm]: 31
• Inner brake drum diameter [mm]: 180
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Fitting Position: Front Axle
• Construction Year from: 01.1992
• Quantity per packing unit: 4
• Test Mark: E1 90R-01881/513
• WVA Number: 20887 20888
• Brake System: Kelsey Hayes
• Supplementary Article/Info 2: without anti-squeak plate
• Supplementary Article/Supplementary Info: with accessories
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: not prepared for wear indicator
• Width 1 [mm]: 137.7
• Width 2 [mm]: 137.7
• Height 1 [mm]: 50.1
• Height 2 [mm]: 48.2
• Thickness 1 [mm]: 19
• Thickness 2 [mm]: 19
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LP756

• Construction Year to: 08.1990
• Alternatively:
• Block Separation:
• Construction Year from: 09.1990
• Height [mm]: 50
• Thickness [mm]: 17
• Wear Warning Contact: excl. wear warning contact
• Brake System: Kelsey-Hayes
• Fitting Position: Front Axle
• Width [mm]: 138
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MAX

• Vehicle Identification Number (VIN) from: -F-127 903
• for brake disc thickness [mm]: 10
• for brake disc diameter [mm]: 239
• Length [mm]: 137.8
• Width [mm]: 51.2, 49
• Test Mark: ECE R90 Approved
• Fitting Position: Front Axle
• Thickness 1 [mm]: 17
• Wear Warning Contact: excl. wear warning contact
• Weight [kg]: 0.542
• Supplementary Article/Info 2: with fastening material
• Manufacturer: FEBI HAMULCE

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 10.1990
• Fitting Position: Front Axle
• Brake System: VOLKSWAGEN
• Width [mm]: 138
• Height [mm]: 51.3
• Thickness [mm]: 17.2
• Width 2 [mm]: 127
• Height 2 [mm]: 47.7
• Thickness 2 [mm]: 17.2
• WVA Number: 20887
• Wear Warning Contact: excl. wear warning contact
• Supplementary Article/Info 2: without anti-squeak plate
• Test Mark: ECE-R90
• Weight [kg]: 1.26
• Manufacturer: VALEO
• Name: VA 301258

• Fitting Position: Front Axle
• Construction Year to: 08.1990
• Alternatively:
• Block Separation:
• Construction Year from: 09.1990
• Width [mm]: 137.8
• Height [mm]: 50
• Thickness [mm]: 17.3
• Wear Warning Contact: not prepared for wear indicator
• Supplementary Article/Supplementary Info: with accessories
• WVA Number: 20887
• Brake System: Kelsey-Hayes
• Article number of recommended accessories: 82026700
• Packaging length [cm]: 15.2
• Packaging width [cm]: 8.8
• Packaging height [cm]: 8.4
• Weight [kg]: 1.25
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: TEX

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Inner brake drum diameter [mm]: 180
• Width [mm]: 31
• Thickness [mm]: 7.5
• Friction Surface Width [mm]: 29
• Supplementary Article/Supplementary Info: with accessories
• Brake System: ATE
• Supplementary Article/Info 2: with handbrake lever
• Packaging length [cm]: 19.8
• Packaging width [cm]: 12.5
• Packaging height [cm]: 8.2
• Weight [kg]: 1.1
• Name: PIDURIKLOTSIDE KOMPLEKT
• Manufacturer: TEX

• Construction Year to: 07.1992
• Engine Code: MH, NZ, 2G, AAV
• Height [mm]: 118
• Fuel Type: Petrol
• Filter type: In-Line Filter
• External Thread [mm]: 6
• Outer Diameter [mm]: 48
• Manufacturer: MAGNETI MARELLI

• Vehicle Identification Number (VIN) from: -F-127 903
• for brake disc thickness [mm]: 10
• for brake disc diameter [mm]: 239
• Length [mm]: 137.8
• Width [mm]: 51.2, 49
• Test Mark: ECE R90 Approved
• Fitting Position: Front Axle
• Thickness 1 [mm]: 17
• Wear Warning Contact: excl. wear warning contact
• Weight [kg]: 0.542
• Supplementary Article/Info 2: with fastening material
• Name: SW 30 91 6012
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.