Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Engine Code: MH
- Construction Year to: 10.1990
- Transmission Type: Manual Transmission
-
Exhaust System: for pre-
catalytic converter - for OE number: 030906265
- Quality: OE
- Manufacturer Restriction: DENSO
- Thread Size: M18x1.5
- Cable Length [mm]: 986
- Number of pins: 3
- Weight [g]: 113
- Gross Weight [g]: 143
- Manufacturer: DENSO
Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor
Additional information: "Tootja: DENSO
POLO (86C, 80), 10.8
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
POLO (86C, 80), 10.8
(kvaliteediklass: Q)"
- Number of circuits: 3
- Lambda Sensor: Regulating Probe
- Manufacturer: KAMOKA
- Lambda Sensor: Regulating Probe
- Construction Year to: 10.1990
-
Engine Code: MH,
NZ - Lambda andur: Bistabiilne andur
- Pinge [V]: 12
- Ülekandeliinide arv: 3
-
Kaal (kg): 0,
08 - Rakendustüüp: elektriline
- Garantii: 3 aastat garantii
- Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Manufacturer: SKV GERMANY
- Name: CE 09SKV903
-
Engine Code: MH,
NZ - Construction Year to: 10.1990
-
Lambda Sensor: Regulating Probe,
Heated - Fitting Position: Exhaust Manifold
- Number of pins: 3
- Cable Length [mm]: 230
- for article number: 81014E
- Quality: OE EQUIVALENT
- Manufacturer: MEAT&DORIA
-
Engine Code: NZ,
AAV -
Construction Year from: 10.1987,
10.1990 - Construction Year to: 08.1990
-
Lambda Sensor: Regulating Probe,
Planar probe -
Vehicle Identification Number (VIN) from: 80-
J- 060001 - Block Separation:
- Fitting Position: before catalytic converter
- Number of circuits: 3
- Connector/Clamp: Connector may need adjustment
- Name: LAMBDA ANDUR
- Manufacturer: MAX
- Lambda Sensor: Regulating Probe
- Construction Year to: 10.1990
-
Engine Code: MH,
NZ -
Exhaust System: for pre-
catalytic converter - Lambda andur: Bistabiilne andur
- Pinge [V]: 12
- Ülekandeliinide arv: 4
-
Kaal (kg): 0,
09 - Takistus [oom]: 13
- Rakendustüüp: elektriline
- Garantii: 3 aastat garantii
- Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Name: CE 09SKV913
- Manufacturer: ESEN SKV
- Engine Code: MH
- Construction Year to: 10.1990
- Transmission Type: Manual Transmission
-
Exhaust System: for pre-
catalytic converter - Quality: OE
- Manufacturer Restriction: DENSO
- Thread Size: M18x1.5
- Cable Length [mm]: 750
- Number of pins: 3
- Weight [g]: 95
- Gross Weight [g]: 144
- Manufacturer: DENSO
-
Name: DN DOX-
0116 -
Lisainfo: DOX-
0116 DENSO -
Additional information: DOX-
0116 DENSO
Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor
- Construction Year from: 08.1991
- Lambda andur: Sond
- Pinge [V]: 12
- Pikkus (mm): 583
- Ülekandeliinide arv: 4
-
Kaal (kg): 0,
15 -
Takistus [oom]: 4,
5 - Rakendustüüp: elektriline
- Garantii: 3 aastat garantii
- Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Manufacturer: SKV GERMANY
- Engine Code: NZ
- Construction Year from: 10.1990
- Transmission Type: Manual Transmission
-
Exhaust System: for pre-
catalytic converter - Quality: OE
- Thread Size: M18x1.5
- Cable Length [mm]: 750
- Number of pins: 3
- Weight [g]: 95
- Gross Weight [g]: 144
- Manufacturer: DENSO
Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor
Additional information: "Tootja: DENSO
ESCORT IV KOMBI (AWF
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
ESCORT IV KOMBI (AWF
(kvaliteediklass: Q)"
- Construction Year from: 10.1990
- Construction Year to: 12.1992
-
Exhaust System: for pre-
catalytic converter - Engine Code: NZ
- Cable Length [mm]: 985
-
Lambda Sensor: Finger probe,
Heated - Manufacturer: DELPHI
- Lambda Sensor: Regulating Probe
- Construction Year from: 10.1990
- Construction Year to: 12.1992
-
Engine Code: AAV,
NZ - Pinge [V]: 12
- Pikkus (mm): 920
- Ülekandeliinide arv: 4
-
Kaal (kg): 0,
11 - Rakendustüüp: elektriline
- Garantii: 3 aastat garantii
- Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Manufacturer: ESEN SKV
- Engine Code: AAV
-
Line insulation design: with silicone-
coated woven- fibre insulation - Connector Shape: rectangular
- for OE number: 030 906 265 P
- Weight [kg]: 0.144
-
Thread Size: M18 x 1,
5 - Cable Length [mm]: 550
- Socket colour: black
- Length [mm]: 650
- Number of pins: 3
-
Lambda Sensor: Regulating Probe,
Thread pre- greased - Number of circuits: 3
- Exhaust System: before catalytic converter
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Engine Code: MH,
NZ - Construction Year from: 09.1987
- Construction Year to: 10.1990
- Transmission Type: Manual Transmission
-
Vehicle Identification Number (VIN) from: J-
060 001 -
Line insulation design: with silicone-
coated woven- fibre insulation -
Cable Length [mm]: 1,
255 - Socket colour: black
- Connector Shape: rectangular
-
Thread Size: M18 x 1,
5 - Weight [kg]: 0.152
- for OE number: 030 906 265 C
-
Length [mm]: 1,
020 - Number of pins: 3
-
Lambda Sensor: Regulating Probe,
Thread pre- greased - Number of circuits: 3
- Exhaust System: before catalytic converter
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Construction Year to: 09.1987,
08.1990 -
Lambda Sensor: Regulating Probe,
Finger probe, Heated -
Vehicle Identification Number (VIN) to: 80-
J- 060000 - Engine Code: NZ
- Block Separation:
- Construction Year from: 10.1987
-
Vehicle Identification Number (VIN) from: 80-
J- 600001 - Cable Length [mm]: 985
- Manufacturer: DELPHI
- Engine Code: NZ
-
for model code: 86,
87 - Construction Year to: 09.1987
- Lambda Sensor: Regulating Probe
- Fitting Position: before catalytic converter
-
Vehicle Identification Number (VIN) to: 80-
J- 060000 - Number of circuits: 3
-
Recommended change interval [km]: 160,
000 - Connector/Clamp: Connector may need adjustment
- Name: LAMBDA ANDUR
- Manufacturer: BOS
-
Engine Code: NZ,
AAV - Construction Year from: 10.1990
- Construction Year to: 12.1992
-
Lambda Sensor: Regulating Probe,
Heated - Fitting Position: before catalytic converter
- Length [mm]: 940
- Number of pins: 3
- Technical Information Number: Universal 77003
- Manufacturer: FAE
-
Engine Code: NZ,
AAV -
for model code: 86,
87, 80 -
Construction Year from: 10.1987,
10.1990 - Construction Year to: 08.1990
- Lambda Sensor: Regulating Probe
- Fitting Position: before catalytic converter
-
Vehicle Identification Number (VIN) from: 80-
J- 060001 - Block Separation:
- Number of circuits: 3
-
Recommended change interval [km]: 160,
000 - Connector/Clamp: Connector may need adjustment
- Name: LAMBDA ANDUR
- Manufacturer: BOS