Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Material: Plastic
-
Manufacturer: JP GROUP A/
S - Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Thickness [mm]: 3.5
- Inner Diameter [mm]: 19.5
-
Material: NBR
(nitrile butadiene rubber) - Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Fitting Position: Cylinder Head
- Inner Diameter [mm]: 36
- Outer Diameter [mm]: 42.3
- Thickness [mm]: 3.15
-
Shape: O-
Ring - Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Quantity per packing unit: 100
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Material: Plastic
- for OE number: 032121142
- Manufacturer: DELLO AUTOMEGA
-
Material: NBR
(nitrile butadiene rubber) - Weight [kg]: 0.003
- Thickness [mm]: 3.5
- Inner Diameter [mm]: 19.5
- Required quantity: 1
-
General Information: o-
ring - Manufacturer: VIKA
- Weight [kg]: 0.015
- Material: Plastic
- Required quantity: 1
- General Information: retaining spring
- Manufacturer: VIKA
- Thickness [mm]: 3.5
- Inner Diameter [mm]: 19.5
-
Material: NBR
(nitrile butadiene rubber) - Weight [kg]: 0.003
-
Name: TIHEND,
JAHUTUSVEDEDELIKUFLANTS - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Material: Plastic
- Weight [kg]: 0.015
-
Name: KINNITUSVEDRU,
JAHUTUSVEDELIKUFLANTS- SULGURKORK - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Material: Plastic
- Name: STOPPER
- Manufacturer: MAX
- Material: Plastic
-
Supplementary Article/Supplementary Info: with spring,
with gasket/ seal - Full Set:
- for OE number: 357198140S
- Manufacturer: DELLO AUTOMEGA
- Quantity per packing unit: 10
-
Supplementary Article/Supplementary Info: with spring,
with gasket/ seal - Weight [kg]: 0.063
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Quantity per packing unit: 10
-
Material: NBR
(nitrile butadiene rubber) - Fitting Position: engine sided
- Sealing Ring Diameter [mm]: 36
- Thickness [mm]: 3.15
- Surface: nubby
-
Name: TIHEND,
JAHUTUSVEDEDELIKUFLANTS - Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Cylinder Head
- Quantity per packing unit: 25
- Inner Diameter [mm]: 36
- Outer Diameter [mm]: 42.3
- Thickness [mm]: 3.15
-
Shape: O-
Ring -
Name: Tihend,
jahutusvededelikuflants - Manufacturer: ELR
- Additional information: EL828963
- Lisainfo: EL828963
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Housing material: Plastic
- Colour: black
-
Supplementary Article/Supplementary Info: with gasket/
seal - for OE number: 055121121F
- Manufacturer: DELLO AUTOMEGA
- Number of flange connections: 3
- Manufacturer: DELLO AUTOMEGA
- Housing material: Plastic
- Colour: black
- for OE number: 074121438C
- Manufacturer: DELLO AUTOMEGA
- Weight [kg]: 0.02
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Cylinder Head,
transmission sided - Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- for OE number: 055 121 121F
- Material: Plastic
-
Supplementary Article/Supplementary Info: with gasket/
seal - Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Vehicle Equipment: for vehicles with air conditioning
- Forward- /Backflow: for foreflow
- Consult accessories list for recommended additional repairs:
- Hose Diameter [mm]: 20
-
Material: GRP
(Glass fibre Reinforced Plastic) - Angle [°]: 90
-
Shape: T Shape
(T Piece) - Heating/Cooling: with thermal switch connector
- Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
-
Shape: T Shape
(T Piece) - Number of inlets/outlets: 3
- Angle [°]: 90
-
Material: GRP
(Glass fibre Reinforced Plastic) -
for pipe diameter [mm]: 9,
13 - for OE number: 074 121 438C
- Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Material: Plastic
-
Fitting Position: Cylinder Head,
transmission sided - Supplementary Article/Info 2: with seal ring
- Name: Jahutusvedeliku flants
- Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
Manufacturer: KAMOKA
- Thickness [mm]: 3.15
- Inner Diameter [mm]: 36
- Material: Rubber
- Weight [kg]: 0.003
-
Name: TIHEND,
JAHUTUSVEDEDELIKUFLANTS - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Cylinder Head
- Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: MAX
- Material: Plastic
- Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: MAX
- Construction Year from: 07.1994
- Forward- /Backflow: for foreflow
- Heating/Cooling: with thermal switch connector
-
Material: GRP
(Glass fibre Reinforced Plastic) - Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: MAX
Vehicle Equipment: for vehicles with air conditioning, for vehicles with automatic climate control
-
Fitting Position: Cylinder Head,
transmission sided - Material: Plastic
- Supplementary Article/Info 2: with seal ring
-
Fabrication Number: CTM-
VW- 010 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Cooling Hose: from water pipe to water pump
- Weight [kg]: 0.084
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- General Information: pipe union
- Manufacturer: VIKA
- Weight [kg]: 0.038
- Supplementary Article/Supplementary Info: with retaining spring
- Supplementary Article/Info 2: with seal ring
-
Name: SULGURKORK,
JAHUTUSVEDELIKUFLANTS - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Diameter 1 [mm]: 20
- Diameter 2 [mm]: 25
- for OE number: 044121144B
- Manufacturer: MEAT&DORIA
- Fitting Position: Front
- Manufacturer: DELLO AUTOMEGA
- Quantity per packing unit: 2
- Weight [kg]: 0.05
- Material: Plastic
-
Supplementary Article/Supplementary Info: without gasket/
seal - Weight [g]: 50
- Supplementary Article/Info 2: without thermostat
- Manufacturer: METALCAUCHO
-
Fitting Position: Cylinder Head,
Front - Heating/Cooling: with two thermal switch connectors
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
-
Shape: T Shape
(T Piece) - Number of inlets/outlets: 3
- Angle [°]: 90
-
Material: GRP
(Glass fibre Reinforced Plastic) - for pipe diameter [mm]: 20
- for OE number: N 907 606 01
- Consult accessories list for recommended additional repairs:
- Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Material: Plastic
-
Fitting Position: Cylinder Head,
Front - Heating/Cooling: with two thermal switch connectors
- Supplementary Article/Info 2: with seal ring
- Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- for OE number: 055121121F
- Manufacturer: NRF
- Material: Plastic
- Weight [kg]: 0.062
- for OE number: 055 121 121 F S1
- Supplementary Article/Info 2: with seal ring
- Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- for OE number: 068121133AB
- Material: Plastic
-
Supplementary Article/Supplementary Info: with gasket/
seal - Weight [g]: 90
- Supplementary Article/Info 2: without thermostat
- Name: IM 90187
- Manufacturer: ORIGINAL IMPERIUM
Manufacturer: KAMOKA
- Material: Plastic
- Weight [kg]: 0.062
- for OE number: 055 121 121 F S1
- Supplementary Article/Info 2: with seal ring
- Name: SW 30 93 4171
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: transmission sided
- for OE number: 044121144B
- Manufacturer: NRF
- Fitting Position: Front
- Material: Plastic
- Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: MAX
- Number of connectors: 2
- Material: Plastic
- Weight [kg]: 0.057
- for OE number: 044 121 144 B
- Fitting Position: Cylinder Head
-
Supplementary Article/Supplementary Info: with gasket/
seal - Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Material: Plastic
- Weight [kg]: 0.059
- for OE number: 055 121 121 F
- Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Number of connectors: 2
- Material: Plastic
- Weight [kg]: 0.057
- Fitting Position: Cylinder Head
- for OE number: 044 121 144 B
-
Supplementary Article/Supplementary Info: with gasket/
seal - Name: SW 32 92 3914
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: frontal sided
- Weight [kg]: 0.11
- Material: Plastic
- Weight [g]: 110
- Manufacturer: METALCAUCHO
-
Fitting Position: Cylinder Head,
Flywheel side - Manufacturer: VERNET
- Fitting Position: Thermostat
- Manufacturer: VERNET
- Weight [kg]: 0.11
- Material: Plastic
-
Supplementary Article/Supplementary Info: with gaskets/
seals - Weight [g]: 110
- Supplementary Article/Info 2: without thermostat
- Manufacturer: METALCAUCHO
-
Fitting Position: Cylinder Head,
Front - Cooling Hose: from engine to engine cooler
- for OE number: 68121132
- Manufacturer: NRF
- Material: Plastic
-
Fitting Position: Front,
Cylinder Head - Weight [kg]: 0.101
-
Supplementary Article/Supplementary Info: with gasket/
seal - Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Supplementary Article/Supplementary Info: with gasket/
seal - Fitting Position: Cylinder Head
- Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: MEY
- Material: Plastic
-
Fitting Position: Front,
Cylinder Head - Weight [kg]: 0.101
-
Supplementary Article/Supplementary Info: with gasket/
seal - Name: SW 99 91 2404
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Cylinder Head,
Lateral Mounting - Cooling Hose: from engine to engine cooler
- Manufacturer: VERNET
- Fitting Position: Front
-
Supplementary Article/Supplementary Info: with gasket/
seal - Weight [kg]: 0.084
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks