Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Catalytic Converter Type: for vehicles with catalytic converter
- Number of pins: 2
- Colour: blue
- Manufacturer: JP GROUP
-
Lisainfo: Temperature sensor for cooling system,
2 pins -
Additional information: Temperature sensor for cooling system,
2 pins
- Number of pins: 2
- Colour: white
- External Thread [mm]: M14x1.5
- Manufacturer: JP GROUP
-
Lisainfo: Temperature sensor for cooling system,
10/ 20/ 80 C -
Additional information: Temperature sensor for cooling system,
10/ 20/ 80 C
- Number of pins: 2
- Housing Colour: black
- Connector Shape: angular
-
Lisainfo: Temperature sensor for cooling system,
2 pins -
Additional information: Temperature sensor for cooling system,
2 pins
- Engine Code: PG
- Number of pins: 2
- Colour: white
- External Thread [mm]: M10x1
- Manufacturer: JP GROUP
-
Lisainfo: Temperature sensor for cooling system,
2 pins -
Additional information: Temperature sensor for cooling system,
2 pins
- Engine Code: PG
- Switch-on point [°C]: 85
- Shut-off Point [°C]: 80
-
Lisainfo: Thermo switch for fan 85-
80 C -
Additional information: Thermo switch for fan 85-
80 C
- Inner Diameter [mm]: 19.5
- Thickness [mm]: 3.5
- Material: Rubber
- for OE number: 7198663
- Manufacturer: DELLO AUTOMEGA
- Inner Diameter [mm]: 19.5
- Thickness [mm]: 3.5
- Weight [kg]: 0.001
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Thread Size: M10x1
- Colour: black
- Number of pins: 1
- Spanner Size: 14
- Length [mm]: 25
- Manufacturer: DELLO AUTOMEGA
- Engine Code: PG
- Block Separation:
-
Vehicle Identification Number (VIN) to: 1G-
KW990000 -
External Thread [mm]: M30 x 2,
5 - Spanner Size: 32
- Colour: black
- Number of pins: 2
- Length [mm]: 70
-
Name: ANDUR,
JAHUTUSVEDELIKUTASE - Manufacturer: MAX
- Length [mm]: 52
- Housing Colour: white
- Spanner Size: 19
- Manufacturer: KAMOKA
- Colour: black
- Supplementary Article/Supplementary Info: with seal
- Lisainfo: Sender for oil temperature
- Additional information: Sender for oil temperature
-
Vehicle Identification Number (VIN) to: 1G-
KB200 000, 1G- KW990 000 - Block Separation:
- Length [mm]: 69.5
-
External Thread Size: M30 x 2,
5 - Thread Length [mm]: 17
- Spanner Size: 32
- Number of connectors: 2
- Colour: black
- Material: Plastic
- Weight [kg]: 0.021
- Supplementary Article/Info 2: with seal ring
- Name: SW 99 90 1569
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Vehicle Identification Number (VIN) to: 1G-
N- 300 000 - Catalytic Converter Type: for vehicles with catalytic converter
- Number of pins: 2
- Colour: blue
- Diameter [mm]: 20
- Manufacturer: DELLO AUTOMEGA
-
Vehicle Identification Number (VIN) to: 1G-
KB200 000, 1G- KW990 000 - Block Separation:
- Length [mm]: 69.5
-
External Thread Size: M30 x 2,
5 - Thread Length [mm]: 17
- Spanner Size: 32
- Number of connectors: 2
- Colour: black
- Material: Plastic
- Weight [kg]: 0.021
- Supplementary Article/Info 2: with seal ring
-
Name: ANDUR,
JAHUTUSVEDELIKUTASE - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Number of pins: 2
- Temperature range from [°C]: 55
- Temperature range to [°C]: 65
- Colour Coding: red
- Manufacturer: JP GROUP
-
Lisainfo: Thermo switch for cooling system,
55- 65 C -
Additional information: Thermo switch for cooling system,
55- 65 C
- Housing Colour: white
- Spanner Size: 19
- for OE number: 26906161
- Manufacturer: KAMOKA
- Number of pins: 2
- Switch Point [°C]: 119
- Manufacturer: JP GROUP
- Lisainfo: Thermo switch for air condition 119 C
- Additional information: Thermo switch for air condition 119 C
- Engine Code: PG
- Weight [kg]: 0.02
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Thread Size: M14x1,
5 - Spanner Size: 19
- Length [mm]: 52
- Number of pins: 2
- Colour: blue
- Colour Coding: white
- Manufacturer: DELLO AUTOMEGA
- Engine Code: PG
- Construction Year from: 01.1989
-
Colour Coding: black/
green - Connector Shape: rectangular
- Number of pins: 2
- Outer Diameter [mm]: 20
- for OE number: 1669949
- Manufacturer: DELLO AUTOMEGA
- Housing Colour: blue
- for OE number: 025906041A
- Manufacturer: KAMOKA
-
Thread Size: M10x1,
0 - Colour: black
- Number of connectors: 1
- Weight [kg]: 0.019
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Housing Colour: red
- Manufacturer: KAMOKA
- Housing Colour: white
- for OE number: 191 919 369 A S1
- Manufacturer: KAMOKA
- Manufacturer: FAE
- Additional information: NRF32110
- Lisainfo: NRF32110
- Sensor Type: NTC Sensor
- Mounting Type: Bolted
- Connector Shape: round
- Number of pins: 1
- Spanner Size: 14
- Thread Size: M10x1
- for OE number: 027919501
- Supplementary Article/Info 2: with seal ring
-
Name: Andur,
Jahutusvedeliku temp. - Manufacturer: NRF
-
External Thread [mm]: M 30 x 2,
5 - Colour: black
- Material: Plastic
- Spanner Size: 32
- Number of connectors: 2
- Weight [g]: 21
- Thread Length [mm]: 17
- Length [mm]: 70
- Name: IM 29624
- Manufacturer: ORIGINAL IMPERIUM
- Colour Coding: red
- Number of pins: 2
- Temperature range from [°C]: 55
- Temperature range to [°C]: 65
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: MAX
- Length [mm]: 25
- Temperature range to [°C]: 125
- External Thread Size: M10 x 1
- Thread Length [mm]: 10.9
- Spanner Size: 14
- Number of connectors: 1
- Colour Coding: black
- Weight [kg]: 0.012
- Supplementary Article/Info 2: with seal ring
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- for OE number: 191919369A
- Manufacturer: KAMOKA
- Temperature range to [°C]: 125
- Length [mm]: 25
- External Thread Size: M10 x 1
- Thread Length [mm]: 10.9
- Spanner Size: 14
- Number of connectors: 1
- Colour Coding: black
- Weight [kg]: 0.012
- Supplementary Article/Info 2: with seal ring
- Name: SW 99 90 1939
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- for OE number: 004 153 2528
-
Thread Size: M14 x 1,
5 - Number of connectors: 2
- Manufacturer: TRUCKTEC AUTOMOTIVE
- Catalytic Converter Type: for vehicles with catalytic converter
- Colour: blue
- Number of pins: 2
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: MAX
- Engine Code: PG
- Colour: white
- Number of pins: 2
- Thread Size: M10 x 1
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: MAX
- Engine Code: PG
- Colour: white
- Number of pins: 2
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: MAX
- Climate Zones: for hot climate zones
- Switch-on point [°C]: 95
- Shut-off Point [°C]: 84
- Number of pins: 2
-
Thread Size: M22X1,
5 - Connector Shape: angular
- Manufacturer: DELLO AUTOMEGA
Vehicle Equipment: for vehicles with air conditioning, for vehicles with trailer hitch
- Number of pins: 2
-
Switch Point [°C]: 55,
65 - Supplementary Article/Info 2: with seal ring
- Housing Colour: brown
- Switch point from [°C]: 65
- Switch point to [°C]: 55
- Weight [kg]: 0.027
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: 1H
- Number of pins: 1
- Colour: black
- Thread Size: M10x1
- Spanner Size: 13
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: EPS
- Construction Year from: 09.1988
- Thread Size: M10x1.0
- Manufacturer: VERNET
- Colour Coding: green
- Weight [kg]: 0.02
- Required quantity: 1
- Number of connectors: 2
- General Information: temperature sensor
- Manufacturer: VIKA
- Sensor Type: NTC Sensor
- Mounting Type: Clipped
- Connector Shape: rectangular
- Number of pins: 2
- for OE number: 025906041A
- Supplementary Article/Info 2: with mounting parts
-
Name: Andur,
Jahutusvedeliku temp. - Manufacturer: NRF
- Engine Code: PG
- Vehicle Equipment: for vehicles with air conditioning
- Switch Point [°C]: 120
- Thread Size: 20 mm
-
Sensor Type: Closed-
type Sensor - Manufacturer: VERNET
- Diameter [mm]: 26
- Length [mm]: 35
- Weight [kg]: 0.02
- Supplementary Article/Info 2: with seal ring
- for OE number: 251 919 501 D
- Housing Colour: black
- Supplementary Article/Supplementary Info: with seal
- Number of pins: 2
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Spanner Size: 29
- for OE number: 191959481
- Manufacturer: KAMOKA
- Catalytic Converter Type: for vehicles with catalytic converter
- Supplementary Article/Info 2: with seal ring
- Number of pins: 2
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Engine Code: PG
- Opening Temperature [°C]: 120
- Number of pins: 2
- Colour: white
- Spanner Size: 20 mm
- Weight [kg]: 0.02
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Colour: grey
- Spanner Size: 29
- for OE number: A0015403045
- Manufacturer: KAMOKA
- Sensor Type: NTC Sensor
- Mounting Type: Bolted
- Connector Shape: rectangular
- Number of pins: 2
- Socket colour: white
- Spanner Size: 19
- Thread Size: M10x1
- for OE number: 026906161
- Supplementary Article/Info 2: with seal ring
-
Name: Andur,
Jahutusvedeliku temp. - Manufacturer: NRF
- Sensor Type: NTC Sensor
- Mounting Type: Clamped
- Connector Shape: rectangular
- Number of pins: 2
- Socket colour: black
- for OE number: 251919501A
- Supplementary Article/Info 2: with seal ring
-
Name: Andur,
Jahutusvedeliku temp. - Manufacturer: NRF
- Number of pins: 2
- Temperature range to [°C]: 120
- Manufacturer: ERA
- Required quantity: 1
- Number of pins: 2
-
Switch Point [°C]: 55,
65 - Colour: red
- Supplementary Article/Info 2: with seal ring
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Required quantity: 1
- Temperature range to [°C]: 125
- External Thread [mm]: M10 x 1
- Supplementary Article/Info 2: with seal ring
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Diameter [mm]: 20
- Number of pins: 2
- Manufacturer: ERA
- Colour: black
- Number of pins: 1
- Weight [kg]: 0.3
- Packaging length [cm]: 12
- Packaging width [cm]: 8
- Packaging height [cm]: 6
- Catalytic Converter Type: for vehicles with catalytic converter
- Number of connectors: 2
- Colour: blue
- Weight [kg]: 0.015
-
Supplementary Article/Supplementary Info: with retaining spring,
with seal - Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Sensor Type: NTC Sensor
- Colour: black
- Number of pins: 2
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: MEY
- Catalytic Converter Type: for vehicles with catalytic converter
- Number of connectors: 2
- Colour: blue
- Weight [kg]: 0.015
-
Supplementary Article/Supplementary Info: with seal,
with retaining spring - Name: SW 30 93 4762
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Connector Shape: rectangular
- Material: Brass
- Number of pins: 2
- Plug Type: Male
- Sensor Type: NTC Sensor
- Spanner Size: 20 mm
- Thread Size: not have
Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.
- Thread Size: 20 mm
- Manufacturer: VERNET
- Engine Code: 1H
- Number of pins: 2
- Colour: blue
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: EPS
- Construction Year to: 07.1991
- Operating temperature from [°C]: 94
- Operating temperature to [°C]: 84
- Thread Size: M22x1.5
-
Sensor Type: Open-
style sensor -
Name: TEMPERATUURILLITUS,
RADIAATORIVENT. - Manufacturer: VER
- Construction Year to: 06.1991
- Thread Size: 20 mm
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: VER
- Catalytic Converter Type: for vehicles with catalytic converter
- Sensor Type: NTC Sensor
- Colour: blue
- Number of pins: 2
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: MEY
-
External Thread Size: M22 x 1,
5 - Spanner Size: 29
- Number of connectors: 2
- Colour Coding: black
- Temperature range from [°C]: 90
- Temperature range to [°C]: 95
- Weight [kg]: 0.061
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Spanner Size: 29
- Colour Coding: grey
- Supplementary Article/Info 2: with seal ring
- for OE number: 191 959 481 C
- Number of pins: 3
-
Thread Size: M22x1,
5 -
Switch Point [°C]: 95,
102 -
Name: TEMPERATUURILLITUS,
RADIAATORIVENT. - Manufacturer: MAX
-
Lisainfo: 21-
0155 -
Additional information: 21-
0155
- Catalytic Converter Type: for vehicles with catalytic converter
- Length [mm]: 37
- Weight [kg]: 0.02
- Supplementary Article/Info 2: with seal ring
- for OE number: 025 906 041 A
- Supplementary Article/Supplementary Info: with seal
- Colour Coding: blue
- Number of pins: 2
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: PG
-
Thread Size: M10x1,
0 - Colour: white
- Spanner Size: 19
- Supplementary Article/Supplementary Info: with seal
- Number of pins: 2
- Weight [kg]: 0.029
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Thread Size: M20
- Number of pins: 2
- Connector Shape: rectangular
- Manufacturer: ERA
- Thread Size: M 10x1
- Number of pins: 2
- Housing Colour: white
- Manufacturer: FAE
- Number of pins: 2
- Plug Type: Blade Terminal
- Socket colour: white
- Connector Shape: oval
- Shut-off Point [°C]: 95
- Switch Point [°C]: 90
-
Thread Size: M22x1,
5 mm - Spanner Size: 29 mm
- for OE number: 191 959 481
- Manufacturer: MEAT&DORIA
- for OE number: 191 959 481 C
- Switch point from [°C]: 102
- Switch point to [°C]: 85
- Manufacturer: TRUCKTEC AUTOMOTIVE
- Voltage [V]: 12
- Switch Point [°C]: 120
- Diameter [mm]: 20
- Spanner Size: 20
- Number of pins: 2
-
Name: TEMPERATUURILLITI,
JAHUTUSVEDELIKU HOIATUSLAMP - Manufacturer: MEY
- Housing Colour: white
- Number of pins: 2
-
Thread Size: M10X1-
6g - Spanner Size: 19
- Manufacturer: DELPHI
- Name: DE TS10251
- Engine Code: 1H
- Number of pins: 2
- Colour: black
- Manufacturer: EPS
- Engine Code: 1H
- Number of pins: 2
- Colour: white
- Thread Size: M10x1
- Spanner Size: 19
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: EPS
- Construction Year from: 10.1988
- Thread Size: M10x1.0
- Manufacturer: VERNET
- General Information: temperature switch
- Manufacturer: BORSEHUNG
- Construction Year from: 01.1989
- Engine Code: PG
- Mounting Type: Plugged
- Voltage [V]: 12
-
Resistor [Ohm]: 2,
080, 322 - Supplementary Article/Supplementary Info: with seal
- Temperature range from [°C]: 25
- Temperature range to [°C]: 80
- Colour: blue
- Sensor Type: NTC Sensor
- Number of pins: 2
- Supplementary Article/Info 2: with retaining ring
- Corresponds to the original part in colour: blue
- Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
- Name: HE 6PT009107551
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- for model code: 2 Pin
-
Thread Size: /
-
Spanner Size: /
- Number of pins: 2
- Connector Shape: rectangular
-
Name: TEMPERATUURILLITUS,
RADIAATORIVENT. - Manufacturer: DLP
- Colour: white
- Supplementary Article/Info 2: with seal ring
-
Material: Brass,
Plastic - Length [mm]: 52
- Weight [kg]: 0.03
- Required quantity: 1
-
External Thread [mm]: M14 x 1,
5 - Spanner Size: 19
- Number of connectors: 2
- Screw length below head [mm]: 28
- General Information: temperature sensor
- Manufacturer: VIKA
- Engine Code: PG
- External Thread Size: M10 x 1
- Number of connectors: 2
- Colour: white
- Weight [kg]: 0.025
- Supplementary Article/Info 2: with seal ring
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Number of pins: 3
- Connector Shape: oval
- Socket colour: black
-
Shut-off Point [°C]: 95,
92 -
Switch Point [°C]: 85,
102 -
Thread Size: M22x1,
5 mm - Spanner Size: 29 mm
- for OE number: 191 959 481 A
- Manufacturer: MEAT&DORIA
- Engine Code: PG
- Length [mm]: 52
-
External Thread Size: M14 x 1,
5 - Spanner Size: 19
- Number of connectors: 2
- Colour: white
-
Material: Brass,
Plastic - Screw length below head [mm]: 28
- Weight [kg]: 0.03
- Supplementary Article/Info 2: with seal ring
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Number of pins: 2
- Weight [kg]: 0.3
- Packaging length [cm]: 12
- Packaging width [cm]: 8
- Packaging height [cm]: 6
- Number of pins: 2
- Weight [kg]: 0.3
- Packaging length [cm]: 12
- Packaging width [cm]: 8
- Packaging height [cm]: 6
-
Thread Size: M22 x 1,
5 - Colour: white
- Switch: for double thermal switch
- Supplementary Article/Supplementary Info: with seal
- Number of pins: 3
- Switch point from [°C]: 102
- Switch point to [°C]: 85
- Weight [kg]: 0.077
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year to: 07.1991
-
Operating temperature from [°C]: 95,
102 -
Operating temperature to [°C]: 84,
91 - Thread Size: M22x1.5
-
Sensor Type: Open-
style sensor -
Name: TEMPERATUURILLITUS,
RADIAATORIVENT. - Manufacturer: VER
- Construction Year from: 04.1989
- Housing Colour: white
-
Thread Size: M10 x 1,
0 - Number of pins: 2
- Supplementary Article/Supplementary Info: with seal
-
Temperature range [°C]: 25,
80 - Power [W]: 0.06
- Manufacturer: METZGER
- Engine Code: PG
- Outer Diameter [mm]: 20
- Number of connectors: 2
- Colour: white
- Switch Point [°C]: 119
- Weight [kg]: 0.045
-
Supplementary Article/Supplementary Info: with seal,
with retaining spring - Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- for model code: For Cooling Fan
- Alternatively:
- Thread Size: M10*1
- Spanner Size: S22
- Number of pins: 2
- Connector Shape: rectangular
-
Name: TEMPERATUURILLITUS,
RADIAATORIVENT. - Manufacturer: DLP
- Engine Code: PG
- External Thread Size: M10 x 1
- Number of connectors: 1
- Switch Point [°C]: 90
- Weight [kg]: 0.03
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: PG
- Outer Diameter [mm]: 20
- Number of connectors: 2
- Colour: white
- Switch Point [°C]: 119
- Weight [kg]: 0.045
-
Supplementary Article/Supplementary Info: with retaining spring,
with seal - Manufacturer: SWAG
- Name: SW 30 93 3888
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Catalytic Converter Type: for vehicles with catalytic converter
- Sensor Type: NTC Sensor
- Thread Size: M10 x 1
- Spanner Size: 19
- Supplementary Article/Info 2: with seal ring
- Colour: white
- Number of pins: 2
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: MEY
- Required quantity: 1
- Switch Point [°C]: 84
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
-
External Thread Size: M22 x 1,
5 - Spanner Size: 29
- Number of connectors: 3
- Colour Coding: grey
-
Temperature range from [°C]: 95,
102 -
Temperature range to [°C]: 84,
92 - Weight [kg]: 0.061
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Thread Size: M22 x 1,
5 - Spanner Size: 29
- Number of pins: 2
- Switch point from [°C]: 95
- Switch point to [°C]: 84
- Manufacturer: ERA
-
Thread Size: M22x1,
5 - Switch: for double thermal switch
- Supplementary Article/Supplementary Info: with seal
- Number of pins: 3
- Climate Zones: for hot climate zones
- Switch point from [°C]: 102
- Switch point to [°C]: 85
- Weight [kg]: 0.076
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: 1H
- Number of pins: 2
- Temperature range from [°C]: 95
- Temperature range to [°C]: 90
-
Thread Size: M22x1,
5 - Spanner Size: 29
-
Name: TEMPERATUURILLITUS,
RADIAATORIVENT. - Manufacturer: EPS
- Sensor Type: NTC Sensor
-
Thread Size: M14 x 1,
5 - Spanner Size: 19
- Supplementary Article/Info 2: with seal ring
- Colour: white
- Number of pins: 2
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: MEY
- Diameter [mm]: 29
- Height [mm]: 42.7
-
Thread Size: M22x1,
5 - Supplementary Article/Supplementary Info: with seal
- Number of pins: 2
- Switch point from [°C]: 95
- Switch point to [°C]: 84
- Weight [kg]: 0.067
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- for OE number: 191959481B
- Thread Size: M22x1.5
- Number of pins: 2
- Tightening Torque [Nm]: 70
- Supplementary Article/Supplementary Info: with seal
- Switch-on point [°C]: 95
- Shut-off Point [°C]: 90
- Packaging width [cm]: 3.5
- Packaging length [cm]: 3.7
- Net Weight [g]: 61
- Packaging height [cm]: 7.2
- Manufacturer: MAHLE
- Number of pins: 3
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Engine Code: 1H
- Number of pins: 3
-
Thread Size: M22x1,
5 - Spanner Size: 29
-
Name: TEMPERATUURILLITUS,
RADIAATORIVENT. - Manufacturer: EPS
- Operating voltage [V]: 12
-
Switch point from [°C]: 91,
84 -
Switch point to [°C]: 102,
95 - Spanner Size: 29
- Supplementary Article/Info 2: with seal ring
- Colour: black
-
Thread Size: M22 x 1,
5 - Number of pins: 3
-
Name: TEMPERATUURILLITUS,
RADIAATORIVENT. - Manufacturer: MEY
- Engine Code: PG
- Switch Point [°C]: 90
- Number of pins: 1
- Thread Size: M 10x1
- Colour: blue
- Supplementary Article/Supplementary Info: with seal
- Manufacturer: METZGER
- Switch-on point [°C]: 95
- Shut-off Point [°C]: 84
- Supplementary Article/Supplementary Info: with seal
-
Thread Size: M 22 x 1,
5 mm - Colour: grey
-
Manufacturer: BORGWARNER
(WAHLER)
- Construction Year to: 07.1991
- Switch point to [°C]: 84
- Shut-off Point [°C]: 91
- Switch point from [°C]: 95
- Switch Point [°C]: 102
- Spanner Size: 29
- Weight [kg]: 0.078
- Manufacturer: VALEO
Vehicle Equipment: for vehicles with air conditioning (manually controlled)
- Engine Code: 1H
- Number of pins: 2
- Colour: red
- Warn Temperature [°C]: 60
- Name: EP 1.840.075
- Manufacturer: EPS
-
Engine Code: 1H,
PG -
Construction Year from: 04.1989,
01.1990 -
Construction Year to: 12.1989,
07.1991 - Colour: white
- Block Separation:
- Manufacturer: BOSCH