• for OE number: 191199233, 1H0199233A
• Fitting Position: Front
• Outer Diameter [mm]: 24
• Weight [g]: 62
• Colour Coding: green
• Inner Diameter [mm]: 24
• Length [mm]: 40
• Width [mm]: 40
• Manufacturer: IMP

Name: PODUSZKA SIL. SEAT CORDOBA, IBIZA, INCA, TOLEDO, VW BORA, CADDY, CORRADO, GOLF, ILTIS, JETTA, NEW BEETLE, PASSAT, POLO, SCIROCCO 08.83-12.13

• Required quantity: 2
• Width [mm]: 39.5
• Mounting Type: Rubber Mount
• Fitting Position: Front
• Material: Rubber
• Outer Diameter [mm]: 24
• Weight [kg]: 0.095
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front, both sides
• Height [mm]: 40
• Outer Diameter [mm]: 50
• Inner Diameter 1 [mm]: 16
• Inner Diameter 2 [mm]: 24
• Manufacturer: OPTIMAL ZAWIESZENIE

• Mounting Type: Rubber-Metal Mount
• Fitting Position: Front
• Name: Engine mounting
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
VW GOLF I/ JETTA I
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
VW GOLF I/ JETTA I
(kvaliteediklass: PJ)"

• Fitting Position: Left, Rear
• Fabrication Number: ZPS-VW-028

• Material: Rubber/Metal
• Fitting Position: Left Rear
• Mounting Type: Rubber-Metal Mount
• Name: PAIGUTUS,KŽIGUKAST
• Manufacturer: MAX
• Lisainfo: 191199381ADE-10
• Additional information: 191199381ADE-10

• Fitting Position: Left Rear
• Manufacturer: DELLO AUTOMEGA

• Mounting Type: Rubber-Metal Mount
• Fitting Position: Left Rear
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Left Rear
• Mounting Type: Rubber-Metal Mount
• Manufacturer: JP GROUP
• Lisainfo: Rubber mount, engine support, rear
• Additional information: Rubber mount, engine support, rear

• Fitting Position: Right Rear
• Mounting Type: Rubber-Metal Mount
• Outer Diameter [mm]: 106
• Inner Diameter [mm]: 11
• Height [mm]: 120
• Manufacturer: DELLO AUTOMEGA

• Material: Rubber/Metal
• Fitting Position: Right Rear
• Mounting Type: Rubber-Metal Mount
• Name: PAIGUTUS,MOOTOR
• Manufacturer: MAX

• Fitting Position: Front
• Fabrication Number: ZPS-VW-118
• Manufacturer: NTY

• Fitting Position: Lower, Right Rear
• Mounting Type: Hydro Mount
• Name: Transmission mounting left
• Quality class: PJ

Lisainfo: "Tootja: SRL
SEAT IBIZA/CORD.,93-
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
SEAT IBIZA/CORD.,93-
(kvaliteediklass: PJ)"

• Mounting Type: Rubber-Metal Mount
• Fitting Position: Right Rear
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Right Rear
• Mounting Type: Rubber-Metal Mount
• Manufacturer: JP GROUP
• Lisainfo: Rubber mount, engine support, rear, right
• Additional information: Rubber mount, engine support, rear, right

• Mounting Type: Rubber-Metal Mount
• Fitting Position: Front
• Name: Transmission mounting left
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
VW GOLF II/JETTA II
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
VW GOLF II/JETTA II
(kvaliteediklass: PJ)"

• Fitting Position: transmission sided, Rear, Left Rear, Front
• Weight [g]: 592
• Manufacturer: IMP

Name: PODUSZKA SIL. SEAT CORDOBA, IBIZA, INCA, TOLEDO, VW CADDY, GOLF, JETTA, PASSAT, POLO, VENTO 08.79-01.04 TY

• Material: Rubber/Metal
• Fitting Position: Left Rear
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.05
• Name: PAIGUTUS,KŽIGUKAST
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Mounting Type: Rubber-Metal Mount
• Fitting Position: Front
• Name: Transmission mounting left
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
VW GOLF III/ VENTO
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
VW GOLF III/ VENTO
(kvaliteediklass: PJ)"

• Material: Rubber/Metal
• Fitting Position: Left Rear
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.05
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Mounting Type: Hydro Mount
• Fitting Position: Front
• Manufacturer: MERTZ

• Engine Code: 2G, NZ
• Transmission Type: Manual Transmission
• Construction Year from: 08.1987
• Mounting Type: Rubber-Metal Mount
• Fitting Position: Front
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front
• Construction Year from: 01.1988
• Vehicle Identification Number (VIN) to: 1G-N-300 000
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Left Rear
• Mounting Type: Rubber-Metal Mount
• Name: PAIGUTUS,MOOTOR
• Manufacturer: MEY

• Mounting Type: Rubber-Metal Mount
• Fitting Position: Front
• Name: Transmission mounting left
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
VW GOLF III/ VENTO
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
VW GOLF III/ VENTO
(kvaliteediklass: PJ)"

• Fitting Position: Right Rear
• Mounting Type: Rubber-Metal Mount
• Name: PAIGUTUS,MOOTOR
• Manufacturer: MEY

• Material: Rubber/Metal
• Fitting Position: Right Rear
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 1.17
• Name: PAIGUTUS,MOOTOR
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: NZ
• Construction Year to: 12.1987
• Fitting Position: Front
• Mounting Type: Hydro Mount
• Name: PAIGUTUS,MOOTOR
• Manufacturer: MAX
• Lisainfo: 191199279CDE-10
• Additional information: 191199279CDE-10

• Engine Code: MH, NZ, 2G
• Block Separation:
• Construction Year from: 08.1987
• Fitting Position: Front
• Mounting Type: Hydro Mount
• Lisainfo: Rubber mount, engine support, front
• Additional information: Rubber mount, engine support, front

• Material: Rubber/Metal
• Fitting Position: Right Rear
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 1.17
• Manufacturer: SWAG
• Name: SW 30 13 0001

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: 191 199 262 A
• Fitting Position: Right
• Manufacturer: GSP

• Vehicle Identification Number (VIN) from: 16/19-E-300 001
• Vehicle Identification Number (VIN) to: 1G-N-300 000
• Fitting Position: Right Rear
• Weight [kg]: 1.16
• Manufacturer: CORTECO
• Name: COC 21651267

• Material: Rubber/Metal
• Fitting Position: Front
• Mounting Type: Hydro Mount
• Name: PAIGUTUS,MOOTOR
• Manufacturer: MAX

• Fitting Position: Right Rear
• Material: Rubber/Metal
• for OE number: 191199262A
• Name: Engine mounting right
• Quality class: PJ

Lisainfo: "Tootja: SRL
VW GOLF II/ PASSAT
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
VW GOLF II/ PASSAT
(kvaliteediklass: PJ)"

• Mounting Type: Rubber-Metal Mount
• Fitting Position: Front
• Name: Engine mounting right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
VW GOLF II/ PASSAT
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
VW GOLF II/ PASSAT
(kvaliteediklass: PJ)"

• Fitting Position: Right
• Manufacturer: 3RG

• Material: Rubber/Metal
• Fitting Position: Front
• Mounting Type: Hydro Mount
• Weight [kg]: 1.515
• Name: PAIGUTUS,MOOTOR
• Manufacturer: FEB
• Lisainfo: 02751 FEBI
• Additional information: 02751 FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 01.1988
• Vehicle Identification Number (VIN) to: 1G-N-300 000
• Fitting Position: Front
• Weight [kg]: 0.48
• Manufacturer: CORTECO
• Name: COC 21651268

• for OE number: 191199262A
• Fitting Position: Right Rear
• Required quantity: 1
• Material: Rubber/Metal
• Weight [g]: 1,202
• Name: IM 30220
• Manufacturer: ORIGINAL IMPERIUM

• for OE number: 90445304
• Fitting Position: Right Front
• Required quantity: 1
• Weight [g]: 645
• Manufacturer: IMP

Name: PODUSZKA SIL. CITROEN XSARA, FORD FIESTA, OPEL CORSA, TIGRA, PEUGEOT 306, SEAT CORDOBA, IBIZA, VW CADDY, GOLF, PASSAT, POLO 01.68-06.12

• Construction Year to: 07.1987
• Fitting Position: Front
• Mounting Type: Hydro Mount
• Manufacturer: JP GROUP
• Lisainfo: Rubber mount, engine support, front
• Additional information: Rubber mount, engine support, front

• Material: Rubber/Metal
• Fitting Position: Front
• Mounting Type: Hydro Mount
• Weight [kg]: 1.515
• Manufacturer: SWAG
• Name: SW 30 13 0002

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front
• Material: Rubber/Metal
• for OE number: 191199279E
• Name: Engine mounting
• Quality class: PJ

Lisainfo: "Tootja: SRL
SEAT TOLEDO I, -95
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
SEAT TOLEDO I, -95
(kvaliteediklass: PJ)"

• Engine Code: MH, NZ, 2G
• Block Separation:
• Construction Year from: 08.1987
• Fitting Position: Left Front
• Mounting Type: Rubber-Metal Mount
• Colour Coding: yellow
• Name: PAIGUTUS,MOOTOR
• Manufacturer: MEY

• Diameter [mm]: 135
• Mounting Type: Hydro Mount
• Fitting Position: Front
• Height [mm]: 130
• Weight [kg]: 1.577
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 12.1987
• Fitting Position: Front
• for OE number: 191199279B
• Mounting Type: Hydro Mount
• Name: Engine mounting
• Quality class: PJ

Lisainfo: "Tootja: SRL
SEAT TOLEDO I, -95
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
SEAT TOLEDO I, -95
(kvaliteediklass: PJ)"

• Engine Code: NZ
• Construction Year to: 12.1987
• Fitting Position: Front
• Mounting Type: Hydro Mount
• Weight [kg]: 1.71
• for OE number: 191 199 279 C
• Name: PAIGUTUS,MOOTOR
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: 2G, NZ
• Transmission Type: Automatic Transmission
• Mounting Type: Hydro Mount
• Fitting Position: Front
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Mounting Type: Rubber-Metal Mount
• Fitting Position: Front
• Name: Engine mounting
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
VW GOLF II/ PASSAT
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
VW GOLF II/ PASSAT
(kvaliteediklass: PJ)"

• Engine Code: NZ
• Construction Year to: 12.1987
• Fitting Position: Front
• Mounting Type: Hydro Mount
• Weight [kg]: 1.713
• for OE number: 191 199 279 C
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front
• Weight [kg]: 1.61
• Mounting Type: Hydro Mount
• Weight [g]: 1,610
• Manufacturer: METALCAUCHO

• Construction Year to: 07.1987
• Fitting Position: Left Front
• Mounting Type: Hydro Mount
• Name: PAIGUTUS,MOOTOR
• Manufacturer: MEY

• Construction Year to: 12.1987
• for OE number: 191199279B
• Fitting Position: Front
• Required quantity: 1
• Mounting Type: Hydro Mount
• Weight [g]: 1,669
• Name: IM 30223
• Manufacturer: ORIGINAL IMPERIUM