Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Inner Diameter [mm]: 50
- Thickness [mm]: 4
-
Material: NBR
(nitrile butadiene rubber) - Manufacturer: METZGER
- Thickness [mm]: 3.65
- Weight [kg]: 0.001
- Inner Diameter [mm]: 19.6
- Manufacturer: METALCAUCHO
- Cooling Hose: from connecting pipe to carburettor
-
Lisainfo: Radiator hose,
intake manifold to carburetor -
Additional information: Radiator hose,
intake manifold to carburetor
-
Vehicle Identification Number (VIN) from: 19-
E- 500 001 -
Engine Code: GU,
HV, GX - Block Separation:
- Manufacturer: DELLO AUTOMEGA
- Engine Code: GU
- Cooling Hose: from connecting pipe to carburettor
- Fitting Position: Upper
- Manufacturer: DELLO AUTOMEGA
- Cooling Hose: from engine to water pipe
-
Lisainfo: Radiator hose,
engine block to water pipe -
Additional information: Radiator hose,
engine block to water pipe
- Material: Rubber with fabric lining
- Cooling Hose: from water pipe to water pump
- Observe system fill quantity:
- Hose Type: Moulded Hose
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Engine Code: GU,
HV, GX -
Vehicle Identification Number (VIN) from: 19-
E- 500 001 - Block Separation:
- Cooling Hose: from waterpump to connecting pipe
- Weight [kg]: 0.042
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Engine Code: GU,
GX -
Vehicle Identification Number (VIN) from: 19-
E- 500001 - Cooling Hose: from thermostat to carburettor
- Fitting Position: Upper
- Manufacturer: DELLO AUTOMEGA
-
Engine Code: GU,
GX -
Vehicle Identification Number (VIN) from: 19-
E- 500001 - Material: Rubber with fabric lining
- for OE number: 037 121 057
- Observe system fill quantity:
- Hose Type: Moulded Hose
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Material: Rubber
- General Information: coolant hose; rubber
- Manufacturer: VIKA
- General Information: coolant hose
- Manufacturer: VIKA
- Engine Code: GU
- Cooling Hose: from connecting pipe to carburettor
-
Lisainfo: Radiator hose,
connecting pipe to carburetor -
Additional information: Radiator hose,
connecting pipe to carburetor
- Construction Year to: 12.1989
- Cooling Hose: from heat exchanger to engine
- Forward- /Backflow: for backflow
- Manufacturer: DELLO AUTOMEGA
-
Engine Code: GU,
GX -
Vehicle Identification Number (VIN) from: 19-
E- 500001 - Material: Rubber with fabric lining
- for OE number: 026 121 056G
- Observe system fill quantity:
- Hose Type: Moulded Hose
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Length [mm]: 113
- Inner Diameter [mm]: 18
- Cooling Hose: from water pump to water pipe
- Weight [kg]: 0.06
- Warranty: 3 years warranty
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 24SKV365
- Cooling Hose: from engine to water pump
- Material: Rubber with fabric lining
- Surface: Rubberized
- General Information: coolant hose; rubber
- Manufacturer: VIKA
- Construction Year to: 07.1989
-
Engine Code: GU,
GX - Cooling Hose: from expansion tank to water pipe
- Fitting Position: Upper
- Manufacturer: DELLO AUTOMEGA
- Forward- /Backflow: for backflow
-
Lisainfo: Radiator hose,
return, heat exchanger to engine -
Additional information: Radiator hose,
return, heat exchanger to engine
-
Vehicle Identification Number (VIN) to: 1G-
N- 300 000 -
Engine Code: GX,
GU -
Vehicle Identification Number (VIN) from: 19-
E- 300 001 - Cooling Hose: from thermostat to waterpump
- Manufacturer: DELLO AUTOMEGA
- Vehicle Identification Number (VIN) from: 16E570001 19E570001
- Transmission Type: Automatic Transmission
- Cooling Hose: from connecting pipe to heat exchanger
- Fitting Position: Centre right
- for OE number: 068121063M
- Manufacturer: SASIC
- Engine Code: HV
- Cooling Hose: from engine cooler to water pump
- Manufacturer: DELLO AUTOMEGA
- for OE number: 068121063M
- Weight [g]: 51
- Cooling Hose: from water pump to water pipe
- Length [mm]: 118
- Inner Diameter 1 [mm]: 24
- Inner Diameter 2 [mm]: 21
- Name: IM 220733
- Manufacturer: ORIGINAL IMPERIUM
- Material: Rubber with fabric lining
- Cooling Hose: from engine to water pump
- Observe system fill quantity:
- Hose Type: Moulded Hose
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Vehicle Equipment: for vehicles with air conditioning
-
Engine Code: GU,
GX - Cooling Hose: from engine cooler to water pump
- Fitting Position: Lower Right
- Manufacturer: DELLO AUTOMEGA
- Cooling Hose: from engine to heat exchanger
- Forward- /Backflow: for foreflow
- Manufacturer: JP GROUP
-
Lisainfo: Radiator hose,
feed, heat exchanger to engine -
Additional information: Radiator hose,
feed, heat exchanger to engine
- Cooling Hose: from engine to water pump
-
Lisainfo: Radiator hose,
water pump to engine -
Additional information: Radiator hose,
water pump to engine
- Cooling Hose: from connecting pipe to engine cooler
- Fitting Position: Upper
- Manufacturer: DELLO AUTOMEGA
- Weight [kg]: 0.16
- Warranty: 3 years warranty
- Always compare old and new part (in particular OE No.):
- Name: CE 24SKV376
- Manufacturer: ESEN SKV
- General Information: coolant hose
- Manufacturer: VIKA
- Material: Rubber with fabric lining
- Cooling Hose: from engine cooler to water pump
- Fitting Position: Lower
- Observe system fill quantity:
- Hose Type: Moulded Hose
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Engine Code: GU,
GX, HV - Block Separation:
-
Vehicle Identification Number (VIN) from: 19-
E- 500 001 - Inner Diameter [mm]: 18
- Cooling Hose: from water pump to water pipe
- Hose Length [mm]: 113
- Weight [kg]: 0.041
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Engine Code: GU,
GX - Vehicle Equipment: for vehicles with air conditioning
- Cooling Hose: from engine cooler to water pump
- Fitting Position: Lower
- Observe system fill quantity:
- Hose Type: Moulded Hose
- Manufacturer: TOPRAN
Material: Rubber with fabric lining, EPDM (ethylene propylene diene Monomer (M-class) rubber) General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Cooling Hose: from engine cooler to water pump
- Manufacturer: JP GROUP
-
Lisainfo: Radiator hose,
lower, radiator to water pump -
Additional information: Radiator hose,
lower, radiator to water pump
- Inner Diameter 1 [mm]: 19
- Inner Diameter 2 [mm]: 24
- Weight [kg]: 0.24
- Colour: black
- Warranty: 3 years warranty
- Hose Length [mm]: 516
-
Suitable for vehicle type: PC
(passenger car) - Always compare old and new part (in particular OE No.):
- Name: CE 24SKV370
- Manufacturer: ESEN SKV
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Vehicle Equipment: for vehicles with air conditioning
- Cooling Hose: from engine to engine cooler
- Fitting Position: Upper
- Manufacturer: DELLO AUTOMEGA
- Inner Diameter 1 [mm]: 25
- Inner Diameter 2 [mm]: 24
- Weight [kg]: 0.22
- Colour: black
- Warranty: 3 years warranty
- Hose Length [mm]: 350
-
Suitable for vehicle type: PC
(passenger car) - Always compare old and new part (in particular OE No.):
- Name: CE 24SKV368
- Manufacturer: ESEN SKV
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Fitting Position: Lower
- Vehicle Equipment: for vehicles without air conditioning
-
not for country specific design: Sweden,
Switzerland - Fuel Mixture Formation: Carburettor
- Colour: black
- Hose Length [mm]: 220
- Inner Diameter 1 [mm]: 32
- Inner Diameter 2 [mm]: 32
- Observe broschure:
- Manufacturer: GATES PASKI PRZEWODY
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Construction Year to: 07.1987
- Fitting Position: Lower
- Vehicle Equipment: for vehicles without air conditioning
-
Country Specific Design: Sweden,
Switzerland - Fuel Mixture Formation: Carburettor
- Colour: black
- Hose Length [mm]: 285
- Inner Diameter 1 [mm]: 31
- Inner Diameter 2 [mm]: 35
- Observe broschure:
- Manufacturer: GATES PASKI PRZEWODY
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Engine Code: HV
- Cooling Hose: from engine cooler to water pump
-
Lisainfo: Radiator hose,
lower, radiator to water pump -
Additional information: Radiator hose,
lower, radiator to water pump
- Cooling Hose: from engine cooler to water pump
- Material: Rubber with fabric lining
- Fitting Position: Lower
- General Information: coolant hose
- Manufacturer: VIKA
- Cooling Hose: from engine cooler to water pump
- Material: Rubber with fabric lining
- Surface: Rubberized
- Fitting Position: Lower
- General Information: coolant hose; rubber
- Manufacturer: VIKA
- Material: Rubber
- Weight [g]: 109
- Length [mm]: 331
- Name: IM 220726
- Manufacturer: ORIGINAL IMPERIUM
Cooling Hose: from expansion tank to ventilation pipe, from expansion tank to engine cooler
- Vehicle Equipment: for vehicles without air conditioning
- Cooling Hose: from connecting pipe to engine cooler
- Fitting Position: Lower Left
- for OE number: 191121051F
- Manufacturer: SASIC
- Material: Rubber with fabric lining
- Cooling Hose: from engine to engine cooler
- Fitting Position: Upper
- for OE number: 191 121 101S
- Observe system fill quantity:
- Hose Type: Moulded Hose
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Cooling Hose: from engine to engine cooler
- Material: Rubber with fabric lining
- Fitting Position: Upper
- General Information: coolant hose
- Manufacturer: VIKA
- for OE number: 027121056A
- Material: Rubber
- Weight [g]: 49
- Length [mm]: 219
- Name: IM 220736
- Manufacturer: ORIGINAL IMPERIUM
- Weight [kg]: 0.28
- Warranty: 3 years warranty
- Always compare old and new part (in particular OE No.):
- Name: CE 24SKV393
- Manufacturer: ESEN SKV
- Vehicle Equipment: for vehicles with air conditioning
- Cooling Hose: from engine to engine cooler
-
Lisainfo: Radiator hose,
upper, radiator to engine -
Additional information: Radiator hose,
upper, radiator to engine
- Cooling Hose: from radiator to water pipe
-
Lisainfo: Radiator hose,
upper, radiator to water pipe -
Additional information: Radiator hose,
upper, radiator to water pipe
- Cooling Hose: from water pipe to water pump
- for OE number: 026121053G
- Manufacturer: SASIC
- Cooling Hose: from engine to engine cooler
- Material: Rubber with fabric lining
- Surface: Rubberized
- Fitting Position: Upper
- General Information: coolant hose; rubber
- Manufacturer: VIKA
-
Engine Code: GU,
GX - Vehicle Equipment: for vehicles with air conditioning
- Material: Rubber with fabric lining
- Cooling Hose: from engine to engine cooler
- Fitting Position: Upper
- for OE number: 191 121 101Q
- Observe system fill quantity:
- Hose Type: Moulded Hose
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Lower
- Vehicle Equipment: for vehicles with air conditioning
- Cooling Hose: from engine cooler to water pump
- Weight [kg]: 0.178
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- for OE number: 026121053G
- Weight [g]: 171
- Length [mm]: 320
- Inner Diameter 1 [mm]: 25
- Inner Diameter 2 [mm]: 24
- Name: IM 220635
- Manufacturer: ORIGINAL IMPERIUM
Cooling Hose: from coolant regulator housing to auxiliary water pump, from thermostat to waterpump
- Vehicle Equipment: for vehicles without air conditioning
-
not for country specific design: Sweden,
Switzerland - Fuel Mixture Formation: Carburettor
- Fitting Position: Lower
- Cooling Hose: from engine cooler to water pump
- Weight [kg]: 0.16
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Upper
- Vehicle Equipment: for vehicles without air conditioning
- Colour: black
- Hose Length [mm]: 385
- Inner Diameter 1 [mm]: 30.5
- Inner Diameter 2 [mm]: 30.5
- Observe broschure:
- Manufacturer: GATES PASKI PRZEWODY
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Cooling Hose: from heat exchanger to engine
- for OE number: 191819373
- Weight [g]: 135
- Length [mm]: 287
- Inner Diameter 1 [mm]: 19
- Inner Diameter 2 [mm]: 19
- Name: IM 220742
- Manufacturer: ORIGINAL IMPERIUM
- Vehicle Equipment: for vehicles with air conditioning
- Cooling Hose: from heat exchanger to engine
- for OE number: 191121051P
- Fitting Position: Lower Right
- Weight [g]: 288
- Length [mm]: 258
- Inner Diameter 1 [mm]: 32
- Inner Diameter 2 [mm]: 32
- Name: IM 220645
- Manufacturer: ORIGINAL IMPERIUM
- Engine Code: GU
-
Vehicle Identification Number (VIN) to: 1G-
N- 300 000 -
Vehicle Identification Number (VIN) from: 19-
E- 300 001 - Manufacturer: DELLO AUTOMEGA
- Engine Code: GX
- Manufacturer: DELLO AUTOMEGA
- Cooling Hose: from engine to engine cooler
- for OE number: 3293561
- Fitting Position: Upper Right
- Weight [g]: 270
- Length [mm]: 366
- Name: IM 220642
- Manufacturer: ORIGINAL IMPERIUM
- Vehicle Equipment: for vehicles without air conditioning
- Cooling Hose: from connecting pipe to engine cooler
- Fitting Position: Upper Right
- for OE number: 191121101S
- Manufacturer: SASIC
- Lisainfo: Water pipe
- Additional information: Water pipe
- Material: Metal
- Manufacturer: JP GROUP
- Lisainfo: Water pipe
- Additional information: Water pipe
- Cooling Hose: from heat exchanger to engine
- Material: Steel Pipe
- Manufacturer: TOPRAN
- Lisainfo: 100 258 HP
- Additional information: 100 258 HP
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Material: Steel Pipe
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Weight [kg]: 0.43
- Required quantity: 1
- General Information: coolant pipe; iron
- Manufacturer: VIKA
- Material: Steel Pipe
- General Information: coolant pipe; iron
- Manufacturer: VIKA
-
Vehicle Identification Number (VIN) from: 19-
E- 300 001 -
Vehicle Identification Number (VIN) to: 1G-
N- 300 000 -
Engine Code: GU,
HV - Shape: Bent
- Weight [kg]: 0.441
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Weight [kg]: 0.52
- Number of Holes: 3
- Weight [g]: 520
- Number of mounting bores: 2
- Manufacturer: METALCAUCHO
- Engine Code: GX
- Weight [kg]: 0.43
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks