Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Height [mm]: 8
- Inner Diameter [mm]: 18
- Outer Diameter [mm]: 30
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 25 tk
- Additional information: PAKENDIS 25 tk
- Material: Plastic
- Transmission Type: Manual Transmission
- Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Transmission Number: AKW,
GV, ADX, 8N, 6F, GU, 4F, 5F, AKX -
Vehicle Identification Number (VIN) from: 1G-
N- 300 000, 19- E- 300 001 -
Vehicle Identification Number (VIN) to: 1G-
N- 300 000 - Inner Diameter [mm]: 15
- Outer Diameter [mm]: 24
- Manufacturer: DELLO AUTOMEGA
Transmission Type: 4-Speed Manual Transmission, 5-Speed Manual Transmission
-
Transmission Number: 4R,
3R - Inner Diameter [mm]: 18
- Outer Diameter [mm]: 30
- Manufacturer: DELLO AUTOMEGA
- Inner Diameter [mm]: 18
- Outer Diameter [mm]: 30
- Height [mm]: 8
-
Material: ACM
(Polyacrylate) - Dust Cover: with dust lip
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Inner Diameter [mm]: 22
- Outer Diameter [mm]: 40
- Manufacturer: DELLO AUTOMEGA
Transmission Number: AON, AEN, AOP, ACL, 9A, ATH, 8A, 7A, AGS, ACH, AWY, AUG, 4A, 4R, 4S, 4T, ACD, ACN, 3R
- Inner Diameter [mm]: 48
- Outer Diameter [mm]: 62
- Height [mm]: 7
-
Fabrication Number: NUP-
VW- 032 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: Centre
- Inner Diameter [mm]: 18
- Thickness [mm]: 8
- Outer Diameter [mm]: 30
- Weight [kg]: 0.011
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Transmission Type: 5-
Speed Manual Transmission - Seal Material: Paper
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Height [mm]: 10
- Inner Diameter [mm]: 50
- Outer Diameter [mm]: 65
- General Information: shaft oil seal; 50x65x10MM
- Manufacturer: VIKA
- Fitting Position: Right
- Block Separation:
-
Thickness [mm]: 7,
6.5 - Inner Diameter [mm]: 48
- Weight [kg]: 0.02
- Manufacturer: FEBI BILSTEIN
- Additional information: FE15263
- Lisainfo: FE15263
Transmission Type: 4-Speed Manual Transmission, 5-Speed Manual Transmission General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- for OE number: 020 311 108 A
- Inner Diameter [mm]: 8
- Outer Diameter [mm]: 14
- Manufacturer: TRUCKTEC
-
Material: ACM
(Polyacrylate) - Thickness [mm]: 8
- Weight [kg]: 0.015
- Inner Diameter [mm]: 21.9
- Outer Diameter [mm]: 40
- General Information: radial shaft seal
- Manufacturer: VIKA
- Transmission Type: Manual Transmission
- Manufacturer: 3RG
-
Fitting Position: Outlet,
outer - Inner Diameter [mm]: 50
- Thickness [mm]: 10
- Seal Diameter [mm]: 65.5
- Shape: O Shape
-
Material: ACM
(Polyacrylate) - Outer Diameter [mm]: 65.5
- Weight [kg]: 0.024
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: frontal sided
-
Material: FPM
(fluoride rubber) - Inner Diameter 1 [mm]: 32
- Outer Diameter 1 [mm]: 47
- Height 1 [mm]: 10
- Swirl Type: Alternating Twist
- Dust Cover: with dust lip
- for OE number: 026103085D
- Manufacturer: CORTECO
- Name: CO 12012709
- Additional information: 12012709
- Lisainfo: 12012709
-
Transmission Code: 4A,
8A, 4T, ACN, AEN, ATH, AUG - Inner Diameter 1 [mm]: 8
- Outer Diameter 1 [mm]: 14
- Height 1 [mm]: 4
-
Material: FPM
(fluoride rubber) - Manufacturer: CORTECO
- Name: CO 01020437
- Outer Diameter [mm]: 40
- Height [mm]: 8
- Inner Diameter [mm]: 21.9
- Weight [kg]: 0.022
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Inner Diameter [mm]: 8
- Outer Diameter [mm]: 14
- Height [mm]: 4
- Radial Shaft Seal Design: B
-
Material: NBR
(nitrile butadiene rubber) - Dust Cover: without dust lip
- Manufacturer: ELRING
- Thickness [mm]: 10
- for OE number: 068 103 085 E
- Fitting Position: frontal sided
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Weight [kg]: 0.023
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Inner Diameter [mm]: 18
- Outer Diameter [mm]: 30
- Height [mm]: 7
- Radial Shaft Seal Design: AS
-
Material: NBR
(nitrile butadiene rubber) - Dust Cover: with dust lip
- Manufacturer: ELRING
- Inner Diameter [mm]: 21.9
- Outer Diameter [mm]: 40
- Height [mm]: 8
- Radial Shaft Seal Design: ASW
-
Swirl Type: Right-
hand Twist -
Material: ACM
(Polyacrylate) - Dust Cover: with dust lip
- Manufacturer: ELRING
- Fitting Position: Inlet
-
Transmission Code: 4A,
8A, 4T, ACN, AEN, ATH, AUG - Outer Diameter 1 [mm]: 40
- Height 1 [mm]: 8
-
Material: ACM
(Polyacrylate) -
Swirl Type: Right-
hand Twist - Dust Cover: with dust lip
- Inner Diameter 1 [mm]: 21.9
- Manufacturer: CORTECO
- Name: CO 12017266
- General Information: radial shaft seal
- Manufacturer: BORSEHUNG
- Inner Diameter [mm]: 8
- Outer Diameter [mm]: 14
- Height [mm]: 4
-
Radial Shaft Seal Design: A/
B -
Material: FPM
(fluoride rubber) - Dust Cover: without dust lip
- Manufacturer: ELRING
-
Transmission Code: 4A,
8A, 4T, ACN, AEN, ATH, AUG - Inner Diameter 1 [mm]: 18
- Outer Diameter 1 [mm]: 30
- Height 1 [mm]: 6.4
- Height 2 [mm]: 8
- Dust Cover: with dust lip
-
Material: NBR
(nitrile butadiene rubber) - Manufacturer: CORTECO
- Name: CO 01019317
- Additional information: 01019317B COR
- Lisainfo: 01019317B COR
-
Engine Code: GX,
GU -
Transmission ID: ARM/
ATZ/ AXR, 4Z/ ARM/ ATZ - Block Separation:
- Thickness [mm]: 8
- Inner Diameter [mm]: 21.9
- Outer Diameter [mm]: 40
-
Material: ACM
(Polyacrylate) - Weight [kg]: 0.015
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Engine Code: GX,
GU, HV -
Transmission Type: 5-
Speed Manual Transmission -
Transmission ID: 2Y/
AGB, 2Y - Block Separation:
- Thickness [mm]: 8
- Inner Diameter [mm]: 23.9
- Outer Diameter [mm]: 40
-
Material: ACM
(Polyacrylate) - Weight [kg]: 0.01
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Seal Material: Paper
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Transmission ID: AKW/
AKX/ 8N, 4F/ 5F/ 6F/ ADX/ GU/ GV - Thickness [mm]: 7
- Inner Diameter [mm]: 57
- Outer Diameter [mm]: 71
-
Material: ACM
(Polyacrylate) - Fitting Position: Left
- Weight [kg]: 0.02
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Transmission ID: AKW/
AKX/ 8N, 4F/ 5F/ 6F/ ADX/ GU/ GV - Thickness [mm]: 7
- Inner Diameter [mm]: 57
- Outer Diameter [mm]: 71
-
Material: ACM
(Polyacrylate) - Fitting Position: Left
- Weight [kg]: 0.02
- Name: SW 30 91 5287
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Quantity: 2
- Quantity Unit: Kit
-
General Information: shaft oil seal
(2pcs/ set) - Manufacturer: BORSEHUNG
- Fitting Position: on transmission housing
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Outer Diameter [mm]: 47
- Thickness [mm]: 10
- Inner Diameter [mm]: 32
- Fitting Position: transmission sided
- Weight [kg]: 0.195
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.