• Operating voltage [V]: 12
• Switch Point [°C]: 150
• Diameter [mm]: 20
• Colour: blue, black
• Number of pins: 4
• Lisainfo: Temperature sensor for cooling system, 4 pins
• Additional information: Temperature sensor for cooling system, 4 pins

• Number of pins: 2
• Housing Colour: black
• Connector Shape: angular
• Lisainfo: Temperature sensor for cooling system, 2 pins
• Additional information: Temperature sensor for cooling system, 2 pins

• Engine Code: ABS
• Construction Year to: 07.1993
• Switch-on point [°C]: 85
• Shut-off Point [°C]: 80
• Lisainfo: Thermo switch for fan 85-80 C
• Additional information: Thermo switch for fan 85-80 C

• Operating voltage [V]: 12
• Switch point from [°C]: 84, 91
• Switch point to [°C]: 95, 102
• Spanner Size: 29
• Supplementary Article/Info 2: with seal ring
• Colour: black
• Thread Size: M22 x 1,5
• Number of pins: 3
• Manufacturer: JP GROUP
• Lisainfo: Thermo switch for fan 102-91/95-84 C
• Additional information: Thermo switch for fan 102-91/95-84 C

• Inner Diameter [mm]: 19.5
• Thickness [mm]: 3.5
• Material: Rubber
• for OE number: 7198663
• Manufacturer: DELLO AUTOMEGA

• Inner Diameter [mm]: 19.5
• Thickness [mm]: 3.5
• Weight [kg]: 0.001
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Voltage [V]: 12
• Switch Point [°C]: 110
• Connector Shape: rectangular
• Number of pins: 2
• Manufacturer: DELLO AUTOMEGA

• Colour Coding: black
• Spanner Size: 13
• Thread Size: M10x1
• Number of pins: 1
• Plug Type: Blade Terminal
• Supplementary Article/Supplementary Info: with seal
• for OE number: 7203359
• Manufacturer: DELLO AUTOMEGA

• for OE number: 7355021
• Manufacturer: KAMOKA

• General Information: temperature sensor
• Manufacturer: VIKA

• Number of pins: 2
• Switch Point [°C]: 119
• Manufacturer: JP GROUP
• Lisainfo: Thermo switch for air condition 119 C
• Additional information: Thermo switch for air condition 119 C

• Engine Code: ADZ
• Construction Year from: 01.1994
• Colour Coding: black/green
• Connector Shape: rectangular
• Number of pins: 2
• Outer Diameter [mm]: 20
• for OE number: 1669949
• Manufacturer: DELLO AUTOMEGA

• for OE number: 357919501A
• Manufacturer: KAMOKA

• Number of pins: 4
• Fitted Diameter [mm]: 20
• Supplementary Article/Info 2: with seal ring
• for OE number: 1331294
• Manufacturer: KAMOKA

• Thread Size: M10x1,0
• Colour: black
• Number of connectors: 1
• Weight [kg]: 0.019
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Length [mm]: 25
• Temperature range to [°C]: 125
• External Thread Size: M10 x 1
• Thread Length [mm]: 10.9
• Spanner Size: 14
• Number of connectors: 1
• Colour Coding: black
• Weight [kg]: 0.012
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: 191919369A
• Manufacturer: KAMOKA

• Temperature range to [°C]: 125
• Length [mm]: 25
• External Thread Size: M10 x 1
• Thread Length [mm]: 10.9
• Spanner Size: 14
• Number of connectors: 1
• Colour Coding: black
• Weight [kg]: 0.012
• Supplementary Article/Info 2: with seal ring
• Name: SW 99 90 1939
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) from: 1H-R-000 001*
• Switch-on point [°C]: 95
• Shut-off Point [°C]: 84
• Number of pins: 2
• Connector Shape: rectangular
• Thread Size: M22X1,5
• Manufacturer: DELLO AUTOMEGA

• Quantity: 1
• Colour: yellow
• Colour Coding: blue
• Weight [kg]: 0.041
• Required quantity: 1
• Outer Diameter [mm]: 20
• Number of connectors: 4
• General Information: temperature sensor; yellow
• Manufacturer: VIKA

• Vehicle Identification Number (VIN) to: 1H-P-990 000*
• Switch-on point [°C]: 95
• Shut-off Point [°C]: 84
• Number of pins: 2
• Thread Size: M22X1,5
• Connector Shape: angular
• Manufacturer: DELLO AUTOMEGA

• Quantity: 1
• Colour: blue
• Colour Coding: blue
• Weight [kg]: 0.041
• Required quantity: 1
• Outer Diameter [mm]: 20
• Number of connectors: 4
• General Information: temperature sensor; blue
• Manufacturer: VIKA

• Quantity: 1
• Colour Coding: green
• Weight [kg]: 0.02
• Required quantity: 1
• Number of connectors: 2
• General Information: temperature sensor
• Manufacturer: VIKA

• Connector Shape: round
• Material: Brass
• Number of pins: 1
• Plug Type: Male
• Sensor Type: NTC Sensor
• Spanner Size: 14 mm
• Thread Size: M10x1,0
• Manufacturer: NISSENS

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Vehicle Identification Number (VIN) from: 1H-R-000 001*
• Number of pins: 3
• Switch-on point [°C]: 95
• Shut-off Point [°C]: 85
• Manufacturer: DELLO AUTOMEGA

• Colour: black
• Colour Coding: blue
• Number of pins: 4
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MAX

• Spanner Size: 29
• for OE number: 867959481
• Manufacturer: KAMOKA

• Sensor Type: NTC Sensor
• Mounting Type: Clipped
• Connector Shape: rectangular
• Number of pins: 2
• for OE number: 025906041A
• Supplementary Article/Info 2: with mounting parts
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Vehicle Identification Number (VIN) to: 1H-S-990 000
• Diameter [mm]: 26
• Length [mm]: 35
• Weight [kg]: 0.02
• Supplementary Article/Info 2: with seal ring
• for OE number: 251 919 501 D
• Housing Colour: black
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 2
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: ABS
• Thread Size: M10x1
• Spanner Size: 13
• Corresponds to the original part in colour: white
• Name: ANDUR,OLITEMPERATUUR
• Manufacturer: EPS

• Colour: grey
• Spanner Size: 29
• for OE number: A0015403045
• Manufacturer: KAMOKA

• Colour: black
• Connector Shape: rectangular
• Spanner Size: 29
• Manufacturer: KAMOKA

• new version:
• Outer Diameter [mm]: 20
• Number of connectors: 4
• Colour: black
• Colour Coding: blue
• Weight [kg]: 0.023
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 2
• Socket colour: white
• Spanner Size: 19
• Thread Size: M10x1
• for OE number: 026906161
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Sensor Type: NTC Sensor
• Mounting Type: Clamped
• Connector Shape: rectangular
• Number of pins: 2
• Socket colour: black
• for OE number: 251919501A
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Number of pins: 2
• Temperature range to [°C]: 120
• Manufacturer: ERA

Manufacturer: FAE

• Diameter [mm]: 20
• Number of pins: 2
• Manufacturer: ERA

• Required quantity: 1
• Temperature range to [°C]: 125
• External Thread [mm]: M10 x 1
• Supplementary Article/Info 2: with seal ring
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Engine Code: ABS, ADZ
• Sensor Type: NTC Sensor
• Mounting Type: Clamped
• Connector Shape: rectangular
• Number of pins: 4
• Socket colour: black
• for OE number: 357919501A
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Colour: black
• Number of pins: 1
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• new version:
• Outer Diameter [mm]: 20
• Number of connectors: 4
• Colour: black
• Colour Coding: blue
• Weight [kg]: 0.023
• Manufacturer: SWAG
• Name: SW 30 93 0616

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) to: 1H-S-990 000
• Sensor Type: NTC Sensor
• Colour: black
• Number of pins: 2
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MEY

• Quantity: 1
• Colour Coding: black
• Weight [kg]: 0.048
• Required quantity: 1
• External Thread [mm]: M22 x 1,5
• Spanner Size: 29
• Number of connectors: 3
• Temperature range from [°C]: 84
• Temperature range to [°C]: 95
• General Information: thermal switch;84-95C
• Manufacturer: VIKA

• Engine Code: ABS
• Number of pins: 2
• Vehicle Equipment: for vehicles without automatic climate control
• Weight [kg]: 0.019
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: ABS
• Vehicle Identification Number (VIN) from: 1H-R-000001
• Number of pins: 3
• Thread Size: M22 x 1,5
• Spanner Size: 29
• Corresponds to the original part in colour: blue, black
• Name: TEMPERATUURILšLITUS,RADIAATORIVENT.
• Manufacturer: MAX

• Spanner Size: 29
• Colour Coding: black
• Connector Shape: rectangular
• for OE number: 1H0 959 481 B
• Number of pins: 3
• Thread Size: M22x1,5
• Switch Point [°C]: 95, 102
• Name: TEMPERATUURILšLITUS,RADIAATORIVENT.
• Manufacturer: MAX

• Operating temperature from [°C]: 94
• Operating temperature to [°C]: 84
• Thread Size: M22x1.5
• Sensor Type: Open-style sensor
• Name: TEMPERATUURILšLITUS,RADIAATORIVENT.
• Manufacturer: VER

• Vehicle Identification Number (VIN) to: 1H-P-990000
• Spanner Size: 29
• Colour Coding: grey
• Supplementary Article/Info 2: with seal ring
• for OE number: 191 959 481 C
• Number of pins: 3
• Thread Size: M22x1,5
• Switch Point [°C]: 95, 102
• Name: TEMPERATUURILšLITUS,RADIAATORIVENT.
• Manufacturer: MAX
• Lisainfo: 21-0155
• Additional information: 21-0155

• Number of pins: 3
• Thread Size: M22 x 1,5
• Spanner Size: 29 mm
• Manufacturer: KAMOKA

• Housing Colour: black
• Colour Coding: yellow
• Corresponds to the original part in colour: blue, yellow
• Number of pins: 4
• Supplementary Article/Supplementary Info: with seal
• Article number of recommended accessories: 0905458
• Quality: IAM
• Power [W]: 0.06
• Manufacturer: METZGER

• Connector Shape: rectangular
• Material: Brass
• Number of pins: 1
• Plug Type: Male
• Sensor Type: NTC Sensor
• Spanner Size: 14 mm
• Thread Size: M10x1,0
• Name: NI 207058
• Manufacturer: NISSENS

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Thread Size: M20
• Number of pins: 2
• Connector Shape: rectangular
• Manufacturer: ERA

• Operating temperature from [°C]: 95, 102
• Operating temperature to [°C]: 84, 91
• Thread Size: M22x1.5
• Sensor Type: Open-style sensor
• Name: TEMPERATUURILšLITUS,RADIAATORIVENT.
• Manufacturer: VER

• Vehicle Identification Number (VIN) to: 1HP990000
• Number of pins: 2
• Plug Type: Blade Terminal
• Socket colour: white
• Connector Shape: oval
• Shut-off Point [°C]: 95
• Switch Point [°C]: 90
• Thread Size: M22x1,5 mm
• Spanner Size: 29 mm
• for OE number: 191 959 481
• Manufacturer: MEAT&DORIA

• for OE number: 191 959 481 C
• Switch point from [°C]: 102
• Switch point to [°C]: 85
• Manufacturer: TRUCKTEC AUTOMOTIVE

• Voltage [V]: 12
• Switch Point [°C]: 120
• Diameter [mm]: 20
• Spanner Size: 20
• Number of pins: 2
• Name: TEMPERATUURILšLITI,JAHUTUSVEDELIKU HOIATUSLAMP
• Manufacturer: MEY

• Engine Code: ADZ
• Number of pins: 2
• Colour: black
• Manufacturer: EPS

• Thread Size: M20
• Number of pins: 4
• Supplementary Article/Info 2: without cable
• Connector Shape: rectangular
• Fitted Diameter [mm]: 20
• Manufacturer: ERA

• Engine Code: ABS
• Thread Size: M10 x 1
• Spanner Size: 13
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 1
• Weight [kg]: 0.02
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Sensor Type: NTC Sensor
• Supplementary Article/Info 2: with seal ring
• Colour: blue, black
• Number of pins: 4
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MEY

• General Information: temperature switch
• Manufacturer: BORSEHUNG

• for model code: For Cooling Fan
• Thread Size: /
• Spanner Size: /
• Number of pins: 2
• Connector Shape: rectangular
• Name: TEMPERATUURILšLITUS,RADIAATORIVENT.
• Manufacturer: DLP

• Number of pins: 4
• Supplementary Article/Info 2: with seal ring
• Colour: black
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Vehicle Identification Number (VIN) to: 1HP990000
• Number of pins: 3
• Connector Shape: oval
• Socket colour: black
• Shut-off Point [°C]: 95, 92
• Switch Point [°C]: 85, 102
• Thread Size: M22x1,5 mm
• Spanner Size: 29 mm
• for OE number: 191 959 481 A
• Manufacturer: MEAT&DORIA

• Number of pins: 2
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Switch Point [°C]: 65
• Number of pins: 2
• Manufacturer: FAE

• Supplementary Article/Supplementary Info: with seal
• Voltage [V]: 12
• Number of connectors: 1
• Corresponds to the original part in colour: white
• Colour: black
• Spanner Size: 13
• Sensor Type: NTC Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PT009107691

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Diameter [mm]: 25
• Length [mm]: 42
• Weight [kg]: 0.03
• Supplementary Article/Supplementary Info: with seal
• for OE number: 6U0 919 501 B
• Colour Coding: blue
• Number of pins: 4
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 07.1993
• Operating temperature from [°C]: 95
• Operating temperature to [°C]: 84
• Thread Size: M22x1.5
• Sensor Type: Open-style sensor
• Name: TEMPERATUURILšLITUS,RADIAATORIVENT.
• Manufacturer: VER

• Vehicle Identification Number (VIN) to: 1H-P-990 000
• Thread Size: M22 x 1,5
• Colour: white
• Switch: for double thermal switch
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 3
• Switch point from [°C]: 102
• Switch point to [°C]: 85
• Weight [kg]: 0.077
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: ABS
• Vehicle Identification Number (VIN) from: 1H-R-000001
• Number of pins: 2
• Temperature range from [°C]: 95
• Temperature range to [°C]: 90
• Thread Size: M22x1,5
• Spanner Size: 29
• Corresponds to the original part in colour: brown
• Name: TEMPERATUURILšLITUS,RADIAATORIVENT.
• Manufacturer: EPS

• new version:
• Outer Diameter [mm]: 20
• Number of connectors: 4
• Colour: black
• Colour Coding: blue
• Weight [kg]: 0.026
• Supplementary Article/Supplementary Info: with seal, with retaining spring
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• new version:
• Outer Diameter [mm]: 20
• Number of connectors: 4
• Colour: black
• Colour Coding: blue
• Weight [kg]: 0.026
• Supplementary Article/Supplementary Info: with seal, with retaining spring
• Manufacturer: SWAG
• Name: SW 32 93 9142

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 06.1993
• Operating temperature from [°C]: 95, 102
• Operating temperature to [°C]: 84, 91
• Thread Size: M22x1.5
• Sensor Type: Open-style sensor
• Name: TEMPERATUURILšLITUS,RADIAATORIVENT.
• Manufacturer: VER

• Quantity: 1
• Switch Point [°C]: 140
• Outer Diameter [mm]: 20
• Weight [kg]: 0.023
• Number of connectors: 4
• Colour: black
• Colour Coding: yellow
• General Information: coolant temperature sensor
• Manufacturer: BORSEHUNG

• Thread Size: 20 mm
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: VER

• Plug Type ID: 4 polig
• Thread Size: M20x1,5
• General Information: temperature sensor
• Manufacturer: VIKA

• Engine Code: ABS
• Construction Year to: 09.1994
• Housing Colour: white
• Thread Size: M10 x 1,0
• Number of pins: 2
• Supplementary Article/Supplementary Info: with seal
• Temperature range [°C]: 25, 80
• Power [W]: 0.06
• Manufacturer: METZGER